Making Cat 6 Cables with Klein Crimpers & Pass Thru Ends

  Рет қаралды 88,772

The Net Guy Reviews

The Net Guy Reviews

Күн бұрын

Пікірлер: 50
@steinbierz
@steinbierz Жыл бұрын
Had the materials and the tools for almost a year and decided today was the day to work on the new install out in my party barn. Watched the video this morning and used the straightforward and well-presented info to complete several cables to connect my TV and SONOS sound bar to the internet. I have 8 more cables that I need to do out there to finish hooking up all the systems. Thanks for the great video.
@TheNetGuy
@TheNetGuy Жыл бұрын
Far out! Glad it helped you and that your project was a success. Wired is the way to go for long distances or backhauls.
@steinbierz
@steinbierz Жыл бұрын
@@TheNetGuy I fully agree with your wired comment...I use it everywhere it is practical.
@TheNetGuy
@TheNetGuy Жыл бұрын
Exactly. Though I have to admit I have a 1/4 mile wireless link between buildings only because Ethernet wasn’t practical and fiber too expensive 😜
@wallcouldtalk
@wallcouldtalk Жыл бұрын
I am not in this industry, so I've never needed to make these. Until today! And your video was hugely useful. Was gifted this tool for Christmas last year and they DO work great.
@TheNetGuy
@TheNetGuy Жыл бұрын
Yay! Glad it helped!
@bukIau
@bukIau 10 ай бұрын
2:50 I’ve had this for about 6-8 months and I always wanted to lock it in place to store it properly in my bag and thanks to your video I didn’t know that if I crimp it slowly it locks in place…finally!
@GmackZilla
@GmackZilla 11 ай бұрын
Thank you! I've been trying to create my own Cat6 with this same tools, watching other videos on YT and you broke it down perfectly. I created my first one while watching this video and pausing when I needed to. Used my tester and it passed! Great work!
@Seantherightway06
@Seantherightway06 10 ай бұрын
Bought the wire and tools a few months ago to wire my whole house up, but haven’t had time. Being iced in gave me that time and went as smooth as can be. Thanks for the help!
@geofreypejsa54
@geofreypejsa54 Жыл бұрын
Thanks for the video; while I know you made this months ago, i just used it today and your demo worked like magic. I wouldn't mind knowing a bit more how to 'relax' the cables as easily as you made it sound. probably just need to practice more!
@michaelpoczynek
@michaelpoczynek Жыл бұрын
Cool tool! Wish I had one 40 years ago. Thanks for making this video.
@ghomerhust
@ghomerhust 2 жыл бұрын
man i love that passthrough plug. all i have are the non pass styles, and yeah it's really tough to get solid sheath crimps when you are first starting out and figuring out the lengths and whatnot. this is SO much better
@hellhole7422
@hellhole7422 5 ай бұрын
Just bought the model down from this one, gonna try it out soon when I do my POE WiFi access points. Thanks for the vid!
@steveng5503
@steveng5503 Жыл бұрын
The “string” inside the cable is actually for “ripping” the sheath open along its length to prepare the cable pairs for “making off”. ✌🏻👍🏻🇬🇧
@yemarican
@yemarican Жыл бұрын
cool work man .. thank you very much for sharing this .. I have the same exact tool .. Klein Tools .. havent used it yet.. I wanted to run a cat5 cable for my internet from the house to my shop .. now I know how .. I appreciate that.
@mathieuleclerc
@mathieuleclerc Жыл бұрын
You are giving an amazing show while delivering top quality content. Awesome job man!! Kudos!
@TheNetGuy
@TheNetGuy Жыл бұрын
Thank you for the kind words!
@barrya.6212
@barrya.6212 Жыл бұрын
@@TheNetGuy Hello, can you just use an old school (cat 5 era) crimper with these pass-through mod heads and then just neatly snip off the excess wires coming past the crimp / terminals ..? ...or will the cut off end be sloppy and interfere with a good plug in connection ..?
@TheNetGuy
@TheNetGuy Жыл бұрын
@barrya.6212 you can, with a very sharp pair of scissors, cut off the excess after it is through and pull it back just a little into the crimper, so it doesn’t stick out. The biggest problem is if you don’t cut it flush, it could push the connector out of the housing.
@barrya.6212
@barrya.6212 Жыл бұрын
@@TheNetGuy Thanks N.G.
@chriskukowski398
@chriskukowski398 Ай бұрын
Man I cannot find a video on replacing the blade on this crimper. I mean it seems straight forward, but there has to be a "best way" to place it so that it cuts even and thoroughly.
@dl4065
@dl4065 Жыл бұрын
Super easy and great video, thanks!
@TheNetGuy
@TheNetGuy Жыл бұрын
Awee 🙏 😊
@nicktheneko
@nicktheneko Жыл бұрын
you should do a good comparison between the cheap Chinese clones of the RJ45 Klein tool and other alternatives
@TheNetGuy
@TheNetGuy Жыл бұрын
Good call!
@MoonLightGGA
@MoonLightGGA 3 ай бұрын
Thank you😊
@joeumana
@joeumana 5 ай бұрын
Thank you so much.
@PaulLadendorf
@PaulLadendorf 5 ай бұрын
@ 4:58 "like this" is that clip side up?
@TheNetGuy
@TheNetGuy 5 ай бұрын
Always clip facing away from you. Easier to see the colors too 👍
@velocityacoustics
@velocityacoustics Жыл бұрын
Please do not use the crimper to remove the jacket. You can nick the conducters. Buy a separate tool that slightly scores the jacket. I can see from the video the crimper completely penetrates the jacket. The "string" is technically called a RIP CORD. Also pass throughs while convenient, are really the worst type of RJ-45s. Having exposed copper on the end of the plug all in a row like that is terrible for NEXT. And the termination was far from perfect, there should be no more than a 1/2 inch of untwist. You could have organized the wires better, and massaged them further into the plug.
@TheNetGuy
@TheNetGuy Жыл бұрын
Tell us how you really feel 😜. Good points for pro crimps.
@stix87
@stix87 7 ай бұрын
Does it even matter the colour code? I mean....as long as both ends are the same??
@TheNetGuy
@TheNetGuy 7 ай бұрын
Yes and no. The pins can be of any color but the pairs matter for shielding. Since you may not be able to see both ends in a large building or long run install it’s recommended to follow the pattern. Additionally wall keystone blocks follow a standard which makes it easier to punch down vs random wires. 👍
@stix87
@stix87 7 ай бұрын
Thank you. In the B standard. It appears that the green pairs are separated. Im sure there's a reason. Can you elaborate on that?
@TheNetGuy
@TheNetGuy 7 ай бұрын
@@stix87yes, the transmit and receive wires actually flip ends when the cable is inserted, so send/receive pairs unit on each side. This is also how POE and auto negotiation work. So you can use any colors, just the pin outs need to be the same.
@stix87
@stix87 7 ай бұрын
@@TheNetGuy thank you! I appreciate the reply! This is great!
@243WW
@243WW Жыл бұрын
My pass throughs don't cut the end ones, orange/white and brown, the cutting blade is too short. Annoying for the price.
@Mrperson0
@Mrperson0 Жыл бұрын
Are you using the Klein Tools crimper that he shown in the video? If so, one thing I learned yesterday is if you bought the Cable Matters cat6 passthrough connectors, they work terribly with these crimpers. The moment I tried out a Klein Tools cat6 passthrough connector, I no longer had any issue with it making clean cuts.
@243WW
@243WW Жыл бұрын
@@Mrperson0 Mate great bit of info. I'll get some.!!!👍
@wettmarley
@wettmarley Ай бұрын
network chuck brother lol
@raiderwolf2066
@raiderwolf2066 Жыл бұрын
Pass throughs are easier to work with, but more prone to failure. Ask any *seasoned* professional.
@LDProOSU
@LDProOSU 11 ай бұрын
Bro you used the A not the B. A for America B for Britain 🇬🇧
@lard1892
@lard1892 3 ай бұрын
I've seen/read that professionals won't use pass thru, not the same quality connection
@TheNetGuy
@TheNetGuy 3 ай бұрын
It’s true, but I would disagree with them. There are various objections but it’s more likely without pass-thru that beginners will miswire and waste ends or have issues. I swear by them.
@clinthyde6583
@clinthyde6583 9 ай бұрын
But i'm sorry but you went too fast When color coding your wires
@TheNetGuy
@TheNetGuy 9 ай бұрын
Oops sorry. It’s printed on most Crimpers including these. Make sure you use the “B” standard in the US.
@Precocktrigger
@Precocktrigger 5 ай бұрын
I suck at this shit
@TheNetGuy
@TheNetGuy 5 ай бұрын
You’ve got this. Good tools and pass thrus make it easier!
There’s NO WAY this works - Debunking bogus network splitters.
9:01
Linus Tech Tips
Рет қаралды 4,2 МЛН
Why 50% of All Crimp Connections Fail - Up or Down?
4:57
Silver Cymbal
Рет қаралды 2,1 МЛН
Farmer narrowly escapes tiger attack
00:20
CTV News
Рет қаралды 12 МЛН
Turn Off the Vacum And Sit Back and Laugh 🤣
00:34
SKITSFUL
Рет қаралды 7 МЛН
快乐总是短暂的!😂 #搞笑夫妻 #爱美食爱生活 #搞笑达人
00:14
朱大帅and依美姐
Рет қаралды 13 МЛН
How many people are in the changing room? #devil #lilith #funny #shorts
00:39
How To Make RJ45 Network Patch Cables - Cat 5E and Cat 6
12:09
Tek Syndicate
Рет қаралды 6 МЛН
Terminating CAT5 cable - Traditional vs Klein Tools Pass-Thru RJ45 Crimper
10:05
All The Gear - No Idea
Рет қаралды 78 М.
8 Wire Stripper Features Everyone Should Know
13:55
LRN2DIY
Рет қаралды 2 МЛН
BIGGEST DIY Mistakes Joining Cables
8:52
The Diligent DIYer
Рет қаралды 309 М.
Klein Tools Basic & Advanced RJ45 Testers Compared
9:13
The Net Guy Reviews
Рет қаралды 72 М.
How To Crimp RJ45 Mod Plugs (Passthrough vs Regular)
4:54
Low Voltage Nation
Рет қаралды 80 М.
Klein Pass-Thru Modular Crimper Eight Year Review
7:09
Otis Dyson
Рет қаралды 6 М.
Farmer narrowly escapes tiger attack
00:20
CTV News
Рет қаралды 12 МЛН