I've Tried 200+ Filaments. These 20 Are The Nicest.

[@thenextlayer]

Thanks for watching! I’d love if you’d share with me ONE way I could make my videos better for YOU? Also, consider supporting us on Patreon to get exclusive discounts from many of the brands featured in this video, plus behind the scenes content and early access to videos. patreon.com/thenextlayer

[@iTzNicholas]

More clickbait

[@calg4920]

How can I get in contact with you? I think I've emailed months ago but have gotten a reply. 😔

[@thenextlayer]

@@calg4920 [e-mail]

[@calg4920]

@thenextlayer I just emailed you. Also, I apologize, it wasn't you that I emailed it was another person on KZbin. But thanks for replying.

[@charlesrestivo870]

@@thenextlayer not necessary sir you do what u do BE WELL

[@enosunim]

My favorite filament can be any color as long as it's cheap = )

[@nobocks]

Same, 2kg for the price of one roll of 750g.

[@studwhelm]

Same, most of the time. Though, I've been really partial to grey lately

[@nobocks]

​@@studwhelm Unpopular opinion : For 1kg there is at least 250g who go the " trash " if you are printing mecanical parts even if you are a god in 3d modelling. By " trash " i mean a plastic bag with a note on this hopping someday who can recycle finger in the nose.

[@calinnilie]

Fillamentum has some gorgeous ones: Gold Happens, Wizard's Voodoo, Vertigo Galaxy, Vertigo Jade are all insane 🤩

[@thenextlayer]

Dang. I need to try more of those! My contact at Fillamentum left so I need to get back in touch with them.

[@calinnilie]

@@thenextlayer I’ve been leaning heavily into Fillamentum now, despite the slightly higher cost per kg. Their spools are 750g, for me that’s an advantage, more colour diversity in less space, but the quality is exceptional. Give them a try, and if they share some discount codes please let us know ;)

[@karelkunz3978]

@@thenextlayer Hello Jonathan, This is Charlie from Fillamentum. It's amazing to hear that the community loves our filaments! Thank you. We should definitely connect. We are also celebrating our 10th anniversary this fall! Feel free to write to me at [e-mail], and let's have a nice little call and chat. We can discuss what your community would love to see and share what we are working on at the moment. Best regards, Charlie

[@karelkunz3978]

@@calinnilie Thank you:)))) Its amazing to hear it:)

[@matttilford2601]

Happy that someone else has found the joy of Ziro 3D. They also have a nice range of the galaxy filaments which i've used too many of.

[@thenextlayer]

Yeah! They reached out and offered to let me try some, I’d never heard of them before!

[@Defyant123]

Siddament crushed series pla is the best ive ever worked with and used... i only keep 500 or so rolls in stock for our farm and right now as of this exact moment Siddament crushed pla is the absolute best of the best.

[@alexzorn]

Could you link to the planter model (it displays during the SliceWorx matte section at 10:42)?

[@WhatsTheWordBozo]

The most underated filament... Elegoo Black PLA. It has phenomenal quality and you can get 4 rolls for 44$.

[@ariadnedanelle]

I have had great luck with elegoo filament.

[@Tacomaster-lq2ik]

Do elegoo spools fit on the AMS lite from bambu lab?

[@ariadnedanelle]

@@Tacomaster-lq2ik They fit on mine just fine. The only downside is they are cardboard so they are a tiny little bit harder to get on and off. they fit just fine though.

[@WhatsTheWordBozo]

@@Tacomaster-lq2ik yes, they also sell petg for same price

[@philippk2]

I had great results with mat grey PLA+ from eSun on two Bambu P1S and soon (probably next Monday) an A1 Mini with an AMS Lite to use up my spools (no AMSs on my P1Ss). Currently, I print terrain and even some vehicles/monsters for Necromunda (a tabletop game from Games Workshop that's taking place in the Warhammer 40k universe). Mainly at 0.12 und 0.08 with 0.4 nozzles. Sometimes also 0.2 for hidden parts or where layer lines are even adding to a wanted look. Since I paint the parts, I do not care for filament color too much but mat gray turned out to be a great starting point. For some parts it's actually enough to just use contrast paints without a primer to get a convincing decayed metal look. These kinds of paints are rather thin and almost seem to interact with the material as it seems like they are "staining" it.

[@ariadnedanelle]

My two favorite brands (available in the US) are Ziro and Amolen. They both make high quality filament, produce unique colors that no one else is offering, and their prices are decent. Amolen offers a lot of unique silks, tricolors, and dual colors as well as regular pla. They also sell sample sets for some of their unique lines like their wood line and marble/earth sets. And Ziro specializes in mattes. They have exceptional matte gradients, but they also sell tricolor mattes. Many of their colors are unique to them and no one else sells them.

[@justinchamberlin4195]

Some of my personal favorite colors: -Flashforge/Voxelab Burnt Titanium PLA -OVV3D Black/Green Shiny Silk (a transition filament from black to forest green to kale smoothie green, with green metallic glitter) -Fusion Filaments Carbon Rod Black HTPLA, ABS, ASA, and HTPET (no glitter, no iridescence, no gimmicks of any kind, and yet it looks truly phenomenal) -Atomic Filament Smoke Blue and Dark Cherry Red CF-PETG (the red was a Maker Box special color and it looks way nicer than the Bambu Lab CF filaments) -Hello3D/Amolen Firefly Glow-in-the-Dark PLA -Snolabs Atrovirens Transparent Blue PETG (sadly discontinued after the SnoDryer debacle) -Elixir Nightshade (get a move on with re-releasing this, please, Printed Solid, even if it means giving up on reformulating Elixir to no longer need powdered colorant) -3D Best-Q Rosewood PLA -FilamentPM Pearl Blue (which can be a shiny, pearlescent blue or a more matte purplish blue depending on your print temperature) -NHH Matcha Green matte PLA -Fusion Filaments Radiated Fog HTPET (translucent yet smoky, with heavy-duty glitter that can only really be explained by the name they gave it) -Coex3D Translucent Blood Red PLA -Proto-Pasta Cloverleaf Metallic HTPLA (a nice forest green but with a hint of gold glitter) -FilamentPM Froggy Gold PETG

[@alentor]

Is is possible to order Bambu-lab refill filament to Israel?

[@thenextlayer]

3DBotX might have some in stock

[@alentor]

@@thenextlayer Yeah, Love them! have ordered from them spare parts for p1s the other week as they are the only ones who actually care these stuff and have them in stock.. It would be great if you get sponsorship form caliber3d, seeing that you also like PoyTerra Matte, and get sponsorship discount, I'd be more than happy to use it :P wink wink Thank you for your quick reply

[@Kaftejist]

just steal some

[@JoshFisher567]

Bambu ABS GF is one of my new filaments, stronger than ABS and less warping/micro cracking and the glass gives it a mat finish. Especially at 30 for 1KG. Below is from their site Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.

[@OneLiterPeter]

Thanks for the video. I have yet to try Filamentum filament. I'll have to give it a try. CookieCad makes some really impressive iridescent filament that prints really well.

[@thenextlayer]

Oh true didn’t even think of them. Need to try them out.

[@OneLiterPeter]

@@thenextlayer Thanks Man LOL, I just blew $60 on a couple rolls of Protopasta, not in your video but they have some really nice looking sparkle filament. I bought their Wonder Blue Glitter HT PLA and a spool of Stardust Glitter HT PLA. The cost is mostly inconsequential, the fun is in the experimentation. 😁

[@karelkunz3978]

Hey Petter, you should! Here is Charlie from fillamentum. If you need any help, contact us on Instagram or Twitter(X). Have a nice printing day!

[@My3DPrintz_X1]

Do the "sparkles" effect the nozzle?

[@thenextlayer]

Nope.

[@captainobvious1721]

I didn't see a link to the marble coaster toy you printed for your kids. I would really like to print one of those. Could you include a link to the model?

[@thargorgardner6479]

Flashforge Burnt Titanium looks amazing

[@whitestar71]

So does their Galaxy Black.

[@davidconner-shover51]

That blue/rose silk stuff. I use that on my IDEX printer to make it last. .1mm layer thickness and 15mm/sec yields a mirror finish

[@RensMakes]

Love your content (And haircut) Thanks

[@thenextlayer]

Thanks mate!

[@Dlutheran]

Awesome video and The haircut is looking good bro.

[@michealhenry6980]

What’s the best gold like filament?

[@Djcrossfaded-c7w]

Have you tried the burnt titanium pla from Amazon?

[@weswortman7789]

I love translucent UV reactive filaments lit up with UV light. A tree in my yard is lit up with glowing snowflakes, etc.

[@richkaiser9453]

Serious question i hope you can help with. I work for a food production company and we want to 3D print pieces in an effort to save money. The issue we are running in to is finding a filament that is metal detectable, so if the piece splinters and gets caught in the food it would set off the metal detection and stop the production. Is there such a filament out there?

[@ValkyrieForge1986]

this maby just me but what is up with the to put it nicely not so nice looking prints i mean i love the show en tell of the filaments but the prints look like ,,,,,,, and i know from looking at your other videos that you can print beautifull prints but this just makes me wonder and not wanne buy these, is it the filament that looks nice and prints like doegie or are these just cranked out for referance

[@itsxolix]

We actually bought some starlight nebula from polymaker as our first fancy looking filament and I personally love it despite having issues printing it at first (nothing to do with the filament just relatively new to the hobby)

[@josephfcarrillo]

not a beautiful filament, but by far the best PLA that I have used Elegoo pla Pro it’s a little challenging to print the first time, but it gives me fantastic results and it is dirt cheap smoother, stronger, and more resilient than all other PLA+

[@alcawmk]

I'm trying to find a filament company that I can purchase multiple shades of certain colors. What company would you recommend?

[@thenextlayer]

Polymaker

[@sylas9762]

Have you test any flexible filament like TPU but they don't suffer hydrolysis over time in humid environment? From what I've known, TPU and PU will fall apart overtime by hydrolysis if left in humid area.

[@thenextlayer]

Bingo. They all do.

[@CartaIV]

Ambrosia filament has some great galaxy color options as well I love their Asa galaxy, and even the velvet (matte) galaxy is so nice to print with

[@dwilliam16]

Have you printed anything with PolyLite Metallic ABS?

[@thenextlayer]

No! I didn’t even know they had metallic ABS… that’s awesome!

[@dwilliam16]

@@thenextlayer Right now only two colors, and I have yet to use them. Also, if you like the purple/pink/blue blends, there are companies that make a filament color labeled as burnt titanium I think you'd like.

[@ivantrail702]

Thanks for the review. I'm colorblind, so they really have to pop for me to like them. I like Flash Forge ASA (Blue in particular) as well as their sparkle series.

[@seanburton3130]

You should definitely check out strong hero 3D’s “shadow red” filament! It looks especially beautiful on busts I’ve found really highlighting details with black while the main color is a gorgeous red that can be shiny when printed slowly or more matte when printed quickly! Wonderful stuff! Also it’s a coextrusion pla shell with petg core. They definitely did some witchcraft because normally those two don’t stick together but this one does!

[@b3nny90]

I don't use many glitter or silk filaments but when I have they have been small local companies here in Australia. 1 being DREMC and PhaserFPV. They also sell glow in the dark and UV changing filaments too which are awesome for ghosts and "scary" pieces.

[@TinTalon]

Great video and happy to say i have most of those filaments you listed. Another absolutely filament that i would recommend a look at would be AMBROSIA ASA Galactic Filament of the Gods Galactic Midnight Meteorite or another of the ASA Galactic colors. Another interesting filament would be Stronghero3d Shadow Golden Fire,Core Shell co extrude (it is PLA with a PETG core) makes for some interesting effects. One last filament to check out would be ProtoPasta Blood of My Enemies.

[@russellschlack3950]

Literally bought a spool of that polymaker starlight nebula two days ago, good to know I chose well for the cosmetic part it will be making

[@thenextlayer]

It is a very nice filament

[@twisicornetwisigames9665]

What about Marble Pla to hide the layer lines ?

[@johnrichardson1949]

sorry to be a pain, but your link for the esun magenta-blue doesn't seem to work, having trouble figuring out which of their filaments is the right one.... want to use your affiliate link

[@JamesTenniswood]

A well produced professional video, good job 🎉

[@thenextlayer]

Thank you very much!

[@asterlus1]

the haircut looks great man‼️🙏 love your content🎉

[@BeardedPrinter]

Both my wife and I LOVE Fillamentum's voodoo filament. It is so beautiful.

[@Roobotics]

FYI, with it being out of stock currently, it looks pretty much identical to what other filament manufacturers call 'burnt titanium'

[@karelkunz3978]

Hello, Bearder, here is Charlie from fillamentum. We are working on Wizards to bring it back this fall!

[@UberGTO]

Current favorites are Ziro3D Neon Matte PLA and Bambulabs PETF-CF in black. The Ziro3D just looks fantastic and the PETG-CF comes out so nice people think its injected molded at first glance.

[@thenextlayer]

They have a NEON too?!?! Gotta try that

[@tenchuu007]

Hahaha, that blue taped spool side. 😂👌

[@jme2006]

Protopaste HTPLA+ comes in excellent colors and texturing. Worth a support.

[@odditythreeD]

Fav will always be two tone ones like 3Djake's "magic PLA" Throwing some petrol on the fire for who was first with Galaxy black - My first order for.... Flashforge Galaxy Black on a 250g spool was, accourding to gmail... 2017, wouldn't be the first time someone copied them!

[@idaner]

Hey, I also live in Israel and I often find that companies don't ship here... how do you manage to get them all here?

[@thenextlayer]

Most of them ship directly to me so I can try it and show it in my videos if I like it… but Amazon also ships a ton of filaments free here and I often buy there

[@HenrySavinon]

Where's the wood filaments? I'm curious as to how many variation exist

[@thegps7197]

Really nice video. Defiantely going to keep coming back to this video when I'm looking for filaments. Good selection of different effects. Wish their were more ABS or ASA versions of these filaments.

[@thenextlayer]

Truth! Make sure you’re subbed. I love doing these types of videos.

[@CartaIV]

@@thegps7197 check out ambrosia (west3d galaxy Asa) they have some amazing color and their black galaxy has a gold sparkling affect and it’s BEAUTIFUL definitely check them out

[@donnyriggz]

I'm a big fan of iSanmate's wood filaments for projects where I'm trying to imitate wood and their matte rainbow and gradient filaments. Haven't tried that Ziro3d rainbow yet, but I intend to grab some when my current rainbow spool runs out (so probably pretty soon).

[@YouTubestopsharingmyrealname]

Numaker's Nuclear Red. it's a bright red with a little bit of shine and a slight blue iridescent quality

[@deviouscat0]

I've used Jessie's soul black glitter PLA and I feel like it has the perfect amount of glitter, but they also make it in a PETG version which could substitute polymaker galaxy black as they don't make it in a PETG version.

[@thedodgelover08]

Voxelab CF-PETG in midnight blue is by far my most favorite filament. You should try it out!

[@lolakan732]

please try cookiecad pla filaments the elixar colors

[@thenextlayer]

I did! Check my most recent video!!

[@triplenickelniner]

I really wanna start this hobby but my concern is venting. I have a small home office so I’ll be looking for a small 3-D printer just to get started and I am concerned about the fumes and dust. I always thought that you could print with PLA and not need to vent your machine, but I keep reading online. That’s not the case and you should vent every 3-D printer, please let me know your thoughts😊

[@dev-null]

I have the same concerns. I went with a flashforge adventurer 5mpro. Built in hepa filter and carbon filter, plus I added a large hepa air purifier to my room. I cant smell a thing....but if I shut the filtering off and open the chamber while printing I can smell...so I know it is doing something.

[@BartNoble]

It would be awesome if there was a standard on pigment percentage. I hate buying a spool of white only to receive one that looks slightly transparent or not as vibrant/vivid as a really solid white.

[@AndrewAHayes]

I have stopped buying filaments that I like as I have far too many, I now only buy the filaments I need!

[@CJ0175]

Overture Rock (Marble) PLA is one of my favourites.

[@zviratko]

Silk PLA is not weaker than regular PLA, it is softer but has a higher impact resistance and higher layer adhesion. PLA-CF* < PLA Matt < PLA < Silk PLA. Extremely silky PLA is almost like PETG (including the poor overhang performance). And that dual tone Sovol/eSUN filament is probably the same as sold under Creality and other brand names, I printed a lot with this particular filament and only realised I swapped brands after printing tens of piece with both - there's absolutely no difference, I believe even the part number is the same if you look at the spool. * or other PLA with fillers that (usually) make it stiffer but weaker across layers

[@thenextlayer]

In my experience silk PLA has TERRRRIBLE layer adhesion, actually.

[@zviratko]

@@thenextlayer weird, I would question your print setting were it any other channel :) I usually print it really slow, though, like 30-60mm @220C (but with steel nozzle that's more like 210 on brass). I believe silks are even described as I did by the manufacturers. It's also possible there are completely different additives used for silks to achieve the high surface tension, for example some are close to impossible to remove from a textured pei plate (most of what I use) and I have to create a separation layer. Just finished scraping some of my plate 5 minutes ago :) I commonly use it in place of petg for gears and stuff (as long as it's not under load). Are you sure you mean layer adhesion? Because they are pretty weak for mechanical stuff, gears under load just melt and bend but the layers hold fine.

[@thenextlayer]

Nah, dude, layer adhesion of silk is considered to be the worst of all the PLA's.

[@nwimpney]

I've found that silk works pretty well for me, too, but only if it's fresh. When it gets old it's horrible. I actually wonder if what people often call bad "layer adhesion" is actually the fiilament itself peeling apart within a layer. I have some very old silk PLA which printed extremely well when I first got it. The parts seemed quite solid. I'd describe them similar to what zviratko described. They felt softer and a bit less brittle feeling, but certainly not weak. However, I decided to print something with the tail end of that roll which has been kicking around in the bottom of a bin for a couple years, and it pretty much shredded like tree bark while I was loading it into the extruder. If you kink it, it cracks, but some thin fibres still hold it together, and you can peel it into shreds with your bare hands. This, in combination with the crazy die swell/length contraction suggests to me that the silk "additives" are probably more of a co-extrusion than a conventional additive. (the elastic bits are pulling your stretched out .4mm extrusion shorter, trying to go back to their original 1.75mm shape) It seems to be a combination of strands of relatively elastic material and standard PLA, and I wonder if the weakness that people see as layer adhesion, is actually just the filament splitting between its constituent parts. When I have broken silk pla in the past, it looks almost like splintered/broken wood, and I have a feeling it might not be strictly between layers, but the layer itself splitting apart within the strands.

[@zviratko]

@@nwimpney well, in the meantime I discovered that some Silk PLAs are indeed incredibly weak, like Bambu Silk that just crumbled on slightest pull. I wonder if that's why it's in general considered weaker? Most silks I used are really more "elastic" (tough) than regular PLA in my experience, but maybe I've been lucky in choosing manufacturers ¯\_(ツ)_/¯

[@larrywright72]

How abrasive are those carbon fiber filaments? Do they require a hardened nozzle?

[@thenextlayer]

Very and yes

[@Eric_In_SF]

Galaxy black, you’re crazy :-) a little sponsor bias. I think the poly maker actually looks the worst. And the sparkles are too dominant. Really chunky and kind of tacky looking like quartz PLA. Part of the reason you’re seeing Prusa being a little lighter because it actually is a nice matte finish instead of that more cheap looking shiny black like the other two.

[@thenextlayer]

In person, it's actually opposite! The Polymaker is very matte (Kexcelled even more, but it has barely any sparkles)

[@zviratko]

Also you should have mentioned some exotic filled PLAs, like Francofil Coffee or Scallop, those make stuff look (and smell :)) not-printed and actually different, or compare wood-filled filaments to PLA-CF because PLA-CF is cheaper, stronger and doesn't clog nearly as much as wood, yet looks very similiar... if only it came in brown. But the green one is extremely similiar to colorFabb Vibers/stoneFill (it's same stuff with different colouring).

[@thenextlayer]

Haven’t tried francofil but maybe I can try it and do another video. Thanks!

[@zviratko]

@@thenextlayer beware of their Oyster filament, not only does it clog but my cat likes crunching on it :) (it does smell fishy)

[@andrewmoore5712]

3DQF regal black is great, black with subtle gold glitter

[@zxamz]

Wow 😮 polymaker Galaxy black is expensive, but ordered it anyways today and arriving this pm and trying it out this pm … let’s see if the layer lines are visible

[@thenextlayer]

Nice. You’re going to love it!!

[@Gryfang451]

For texture, I usually use fuzzy skin at a 0.4 to 0.6 on both settings in Prusa slicer. The only part that isn't textured at that point is the top. Rather than paying the CF "tax". I've tried PLA+ CF, and PETG-CF recently, and I haven't found them lacking, but at their price tag compared to a regular filament for an additive that really doesn't do much, I have to say it's not all that impressive.

[@thenextlayer]

Smart!

[@erichasz7068]

Hey there! Love your content.

[@dragohek]

some of the links are broken

[@dthree4113]

Elegoo makes a nice filament that looks a lot like the Wizard's Voodoo. It is confusingly named "Galaxy Black'". Big fan of the Starlight series also. Comet was the perfect color for a dragon's egg I made as a gift recently.

[@ziruszirus1654]

I really love #Nobufil filament - many basic colors, great strength and easy to print.

[@EmoKillsBest]

Do any modifications need to be made to printers before attempting to print any of these filaments? A hardened steel nozzle, for example?

[@thenextlayer]

Only for the PLACF. The rest no need for special nozzle.

[@EmoKillsBest]

@@thenextlayer Awesome, thanks for your reply! :)

[@meviews]

Much better title for the video. It made me click on it where as the one before didn't intrigue me

[@thenextlayer]

We are testing about 10!

[@Spikeon01]

The Ambrosia PC-ABS black is AMAZING if you haven't played with it yet! And it's cheap!

[@charlesfe]

CookieCAD is another producer of great matte color change filaments, color palette looks similar to SliceWorks. CookieCAD's Galaxy Black is really good too.

[@barmacg30]

Burnt Titanium is one of my favorite colors. Flash Forge and a couple of other companies make it and it is not expensive. PLA prints out the best I do have it in PETG but it doesn't print out as nice as PLA

[@psballent]

Elegoo Galaxy Black is one of my favorite beautiful filaments, although it's dark blue, not black

[@wgmyler]

Thanks for introducing me to new filaments & manufacturers! I'm looking for alternatives to Bambu Labs after having a horrible customer experience with them trying to get them to honor their misleading cancellation policy.

[@Jynxx_13]

Stronghero 3D makes Wizard Vodoo PLA and PETG that is a blue/purple sparkling color shift. It's beautiful.

[@thenextlayer]

Nice I’m gonna check it out thanks. Never tried their filament.

[@nadir3D]

Another great video. btw This looks familiar 0:13 and 5:05

[@miketrout7098]

I'd like to see your opinion of Mika3d filament

[@JacksMacintosh]

Love to see that my feedback about the filament tags was incorporated 😊 And תתחדש on the haircut!

[@anwyll]

Can't believe this video did not include Protopasta - worth including for their HTPLA range and also for their matte fiber composite range. They also often have a bunch of recycled PLA pastel type colors available for limited runs. Not to mention their metal composite filaments! Their prices are a drawback for prototyping but for immaculate final parts they're among the best. Edit: I do make this comment from the US market, I have no idea what Protopasta's availability is anywhere else 😕

[@thenextlayer]

Yeah I don’t think they ship to Israel but I’ll check

[@anwyll]

@@thenextlayer Or if they do I shudder to think of the cost 😕 Until Filamentum had their US shop I just could not justify buying their stuff for the same reason. But I didn't think of market limitations when originally commenting

[@laramieist]

I’ve used paramount 3D and honestly the colors are top tier and it I believe it is pla+ but just says pla.

[@thenextlayer]

Thanks I’ll check it out!!

[@Nothwarren]

Ok so elegoo seems to be selling the same first filaement under the name galaxy black on their site

[@TS_Mind_Swept]

5:57 I guess this is a hot take or something, but I really don't mind layer lines, and I don't know why people always make such a big deal about them 🤷🏿‍♀️ I honestly think the messy looking faces look worse..

[@FyrbyAdditive]

Ohhh that looks like my V-Spooler in the video! Hope you like it! :)

[@thenextlayer]

Stay tuned, I’m doing a video about it next week!

[@FyrbyAdditive]

@@thenextlayer exciting, looking forward to it!

[@fuzznickers]

You cut your hair 😮 Thank you for sharing everything you do!

[@mikesprague]

So many filaments seem like they're made in the same factory but them branded later...like the Sliceworx matte gradients are the exact same as Isanmate...

[@JH-zo5gk]

Your CF prints are weird. Mine don't have that texture, they just look matte, but exactly the same as a normal pla part.

[@jasonanderson438]

4:19 that pot looks like a tire

[@grzegorzszachowski9541]

You should definitely Printe-me Ampere PLA/TPU that conducts electricity.

[@TFMitch]

Surprised I haven't seen anyone mention CookieCAD. I love their Elixir PLA line

[@thenextlayer]

Haven’t gotten my hands on their filament, I don’t think they ship to Israel… but I’ll reach out!

[@WorldWide3133]

What I don't understand is how you payback the loan without selling anything if you don't have an income stream. I get the borrowing advantages

[@CurtisCreations402]

Don't be sleepin on thos glow in the dark filiments 😴😴

[@tilengtr5747]

Great video, love from Slovenia! עם ישראל חי

[@BeamBros.]

You totally forgot Proto-Pasta's Empire Strikes Black!!! No mention of Proto-Pasta at all... Kinda makes me sad. You should really check them out, great stuff!

[@thenextlayer]

I don’t think they ship to Israel, do they…? I’ve looked before but ended up not ordering, I think that’s why

[@BeamBros.]

@@thenextlayer Makes total sense.

[@Dramure]

Long as your belts are really tight...your layer lines should be minimal as heck...if not try a different printer.

[@73FPV]

I dig the Hair cut, But im Bald, sooo. Great edit. Great info, as always. Thank you.

[@thenextlayer]

Thanks for watching!

[@SianaGearz]

I'm pretty sure black HIPS would be your favourite filament, you might get addicted.

[@thenextlayer]

Gotta check it out. I have heard that hips don’t lie.

[@ryanencinas4253]

Fancy Pants but more in the wallet. Jayo. Super simple reason. It's descent, they give you 1.1KG, and they're cheap.

[@SujanPoddar-r6d]

Truely jaw-dropping filament.....have been watching the video 5 times still cannot understand which to choose and which not to😂😂😂😂😂

[@thenextlayer]

Glad you liked it. If I had to pick my favorites from within this list, Polymaker galaxy black, starlight comet, and fillamentum wizards voodoo.

[@felixbreidenstein2950]

Thanks for the nice video. But can you PLEASE get yourself a hot air gun to get rid of these tiny hairs/stringing on the prints? the macro shots especially look bad and the print quality can easily be improved with a one second swipe with hot air above the part :)

[@sealofthesea5233]

honestly I hate shiny filament, it looks really cheap. I prefer Matte.

[@toadiloader3183]

Yo, nice haircut dude!