Two For One Design Using Lamination Pro No Wood Turning

[@kathleenposton2334]

So, THAT'S where you've been! I've missed you and your work. Always something new and different and I missed that.

[@ThePapa1947]

Thank you Kathleen. Looks like I will be back at the lathe soon. Gary

[@GordonRock1]

Great information again, Gary. Very interesting software! Take care, …..Gord

[@ThePapa1947]

Thank you Gord. I think it is fun stuff. It is a good way to keep those wheels turning in your head. You hang in there my friend we are thinking about you. Gary

[@milesbrett7002]

Glad to hear you can put weight on your foot again. Hope you are able to get back making turnings. Been following your series on the software and thinking about purchasing it, but have to make sure my old laptop will run it. I also have been out of commission the last few. week. I was cutting. some small segments and accidentally caught my thumb with the saw blade. Only lost about a third of my thumb nail. It has mostly healed back when I tried to cut my index. finger with the band saw. 6 and half hours later and nine stitches got that fixed. Had the stitches out on Tuesday so it shouldn't be long before I am back in my shop. I have been using power tools for 60 years without any incidents and then twice in less than a month so my pride was hurt more than anything. Luckily there was no permanent damage.

[@ThePapa1947]

Thanks Miles. It does feel good to stand and no pain is GREAT! This software will run on an older laptop or computer. You can try a 30 day free trial to make sure and to see if you like it. Sorry to hear about you accidents. Best wishes for it healing soon. Take care, Gary

[@kentturkow1572]

Another great and informative video. Thanks so much for sharing your knowledge of Woodturner Pro.

[@ThePapa1947]

Thank you Kent. Happy you liked it. I appreciate you watching. Gary

[@FranciscoMartínez-y7n]

Le deseo que se mejore aprendo mucho de usted

[@ThePapa1947]

Francisco agradezco tus comentarios y después de ver al médico hoy se ve bien. Volveré pronto. Cuidarse, gary

[@glencrandall7051]

Wishing you good news from your Dr. This was an excellent tutorial. Thank you for sharing. Have a great day and stay safe.🙂🙂

[@ThePapa1947]

Thanks so much Glen I appreciate it. So I saw the doctor Friday and they did x-ray the said it's looking like it healed quite well. I have permission to put weight on the bad ankle now. And I'm supposed to start out slowly walking with the boot using crutches or a walker. When I can do full pressure with the boot on I switch to a brace. I tried walking with the boot on and was very successful so I'm looking forward to getting to that place and getting to my lathe.

[@PhilAndersonShadyAcresWoodshop]

Well, at least now I understand how you can visualize your segmented turnings, Gary! I always thought you just had it in your head and I couldn't understand how you could take that visualization and apply it to a glue up. I would get so confused! I see by a couple of your comments you are good to go! Hooray! I'll bet that feels good. Looking forward to your first turning video in awhile. Still, take it easy and don't re-injure anything, my friend! 😊 Phil

[@ThePapa1947]

Thank you Phil. For sure I use this software for making a turning like this one where you make a feature ring. All the others I do the old fashion way. I just guess LOL Yes they said to start with the boot and when I can stand up with it on and it does not hurt to go to the brace that goes over your sock. The good news is as soon as I tried standing there was no pain. I figured it would take a week. They did say I could get back turning as long as I have no issues getting to the lathe or standing their doing it. So maybe in a few days I may wander out there. Thanks for watching buddy! Gary

[@PhilAndersonShadyAcresWoodshop]

@@ThePapa1947 Enjoy when you get there, my friend! Looking forward to what you come up with!

[@DouglasSewell-g1s]

Hope all went well at the Dr! Can't wait to see you back in the shop!

[@ThePapa1947]

Thank you very much Douglas. It went real well. They did X-rays and said it looked good. Also said I could start putting weight on the ankle with the boot on and once I can do full weight I can move to the brace. I able to walk decently with a walker for balance pretty good. As a matter fact for the first time since it happened I walked over and looked at my lathe. Pretty sure heard say And Just Where Have You Been LOL Maybe towards the end of this week I just may be able to turn something small and easy, Thanks for asking, Gary

[@DouglasSewell-g1s]

@ThePapa1947 I'm so glad to hear that you're doing good!

[@WoodturningWithJohnMarro]

Glad to hear you are on the mend. Thanks for the software walkthrough series. 😊

[@ThePapa1947]

Thank you John, I will see how it goes I may take a try and getting to the lathe next Wednesday. I need to put weight on it with the boot on till there is no pain then with the brace which does not keep the foot from bending. Right now no pain the the boot on while standing. Gary

[@skipflorey2511]

Gary, hoping for good news👍. Another nice review of lamination pro. Some really good ideas.

[@ThePapa1947]

Thank you Skip. Happy you enjoyed it. The appointment went very well. Permission to put weight on that foot now. Gary

[@davesullivan3289]

Great turning Gary. Many things to understand and try. Hope the Dr gives you a good report. I know what it is to be payed up. Good Luck

[@ThePapa1947]

Thanks Dave. Got good news from the doctor. Should be up and walking soon. Gary

[@54lespaul3]

Thanks again Gary! I'm always fascinated by process. I'm not too likely to start doing this, but I love watching how it's done! So incredible to have a computer give you the dimensions that enable these segmented turnings. Thanks again, and get well soon! Cheers, Rick

[@ThePapa1947]

Thank you Rick. Happy you enjoy watching them. We have so many things we can do in wood turning and sure do not have to do all of them. I like the looks of some resin wood turnings but do not wish to do them. Thanks for watching, Gary

[@carolriley8472]

Thanks so much, Gary, I've really enjoyed these lesson for using the software. Hope your doctor appointment goes well for you and that you can go back to turning. I've had to stop turning 3 different times and I know it is not easy waitting on the Okay to turn again.

[@ThePapa1947]

Thank you Carol I am happy you enjoy these videos. Some people hate them but I do them for those who enjoy them and I do them because I enjoy doing them. Especially since being benched for this long. Good news is I am free to start walking. And that is not an easy task. A matter of going from part weight bearing to full. And as long as I can get to my lathe will be able to start soon. Thanks for watching, Gary

[@cherm-k9b]

Thank You Gary...Always enjoy watching your active imagination playing around with your next possible adventure (although I probably only absorb part of your game plan) Until next time & I am looking forward to your 100% recovery so you can get back to enjoying your golden years fain free...TM

[@ThePapa1947]

Thank you my friend. This was fun to do. Had some good news at the doctors. X-ray's looked good. So I start by slowly putting weight with the boot on and when it does not hurt I can switch to the brace, Good news is it does not hurt with the boot on but I will give it a few days before I try the brace. So if all goes well I will be wood turning very soon. Gary

[@robertgabel3451]

I have been experimenting with the software in trial mode based on your videos. Getting ready to hit the purchase button for the whole suite. Thanks for doing these (and your other) videos. Learn lots from them. Just finished my first segmented bowl from some scraps laying in my shop to verify that I could actually succeed in making one. Now it is time to step it up a notch.

[@ThePapa1947]

Good to hear Robert. The software sure can make things easier. Have fun! Gary

[@TheMessyStudio]

Cool stuff, Gary!

[@ThePapa1947]

Thank you very much Billy! Take care. Gary

[@richardcollins8130]

Loving these presentations. Good luck at the doctors office. As much as I like these lessons I very much like your work.

[@ThePapa1947]

Thanks Richard. Happy you are liking these. The appointment went very well. Permission to put weight on that foot now. Gary

[@alinmayerthorpe7801]

Thank you Gary for another look at making feature rings and other looks that can be achieved with lamination pro! I will keep this for reference in the future when I start making some segmented turning! Cheers Al

[@ThePapa1947]

Thank you Al. Happy you enjoyed the video. Gary

[@garybeasley4885]

Nice and clear demonstration. I have the software so I will check this out.

[@ThePapa1947]

Thank you very much Gary. I am sure you will have not problem. Gary

[@MarklTucson]

That looks like a very great set of tools for the kinds of turnings you do. All the best to you as your ankle heals.

[@ThePapa1947]

Thank you Mark. Good news at the doctors yesterday. I am free to start walking. And that is not an easy task. A matter of going from part weight bearing to full. And as long as I can get to my lathe will be able to start soon. Thanks for watching, Gary

[@WoodenItBeNice]

Great video once again Gary but my brain hurts now. Take care my friend. Hwyl, Huw

[@ThePapa1947]

Thanks Huw, Well when we try something new it always seems to hurt something or other. My brain hurts when I think about sorting through all the stuff I have in the shop which I never use LOL. Hwyl, Gary

[@MANJITSINGH-ko2oi]

HI GARY its nice u still making videos. hope r getting better.

[@ThePapa1947]

Thanks Manjit! I am getting there, Gary

[@kimseyjustkimsey5256]

Howdy Gary that’s a pretty cool computer program ya got there very nice layout👍 Hope ya got a good report from the Doctor, Take care buddy.

[@ThePapa1947]

Thanks Kimsey. Yes it sure is a cool program. Good news from the doctor. They have me walking some now and I start PT in a week. Gary

[@thebears8955]

Hope that the Doc has some good news for you Gary. Great job again with the video. I have been playing around with the software too making lots of interesting looking laminations. Thanks for expanding on the initial simple generation laminations as even the further designs are quite easy as you note. I did note that you can get the cut instructions directly from Lamination Pro without having to import them into Woodturner pro. Once you have the generation of the lamination that you want just select file and print preview in LP and you can see the build instructions for the design you have made. Looking forward to seeing you back in the shop (as I am sure you are also) but really enjoyed this series of videos too! Take Care, Ted

[@ThePapa1947]

Thank you Ted. It was good news. I can now start putting weight on it with a boot on. When I get full weight and it does not hurt I switch to a brace. The good news is when I stood on it after getting home there was no pain. You know I looked for a way to print that out from inside the program and missed it. Thanks for pointing that out. I will update that tomorrow in a short video updating my ankle issue. And I will give you the credit for letting me know. Take care, Gary

[@rayworstine4399]

Good evening, Gary. This video will give me something to work towards. Very cool. Certainly hope you can get back on your feet very soon. See ya later, Brother.

[@ThePapa1947]

Thank you Ray. I find it very fun to play around with this software. Good news the doctors visit was what I was hoping for. X-ray's looked good and I am now able to put weight on that ankle. Starting with the air cast(boot) and when that does not hurt the brace. So I got home and tried standing on the boot. No pain at all. I will try the brace in a few days. I may work my way to the lathe in a few days but probably with the boot. Take care brother! Gary

[@rayworstine4399]

@@ThePapa1947 Gary, that is an excellent report. I am smiling with you. Small steps.

[@laurazakrzewski]

Some of that actually made a little sense to me. Way to go Gary! Hope you got a good report at the Docs.

[@ThePapa1947]

Thank you Laura and happy some made sense. Good news at the doctors, I am free to start walking. And that is not an easy task. A matter of going from part weight bearing to full. And as long as I can get to my lathe will be able to start soon. Thanks for watching, Gary

[@charlesreicks648]

Good Luck Thanks Tim

[@ThePapa1947]

Thank you Tim! The appointment went very well. Permission to put weight on that foot now. Gary

[@leenoble7472]

I am starting to sound like a broken record, but this is another great video Gary! Hope you got the green light from the doc to get back to turnin. 🤞🏻

[@ThePapa1947]

Thank you very much Lee. I like the sound of that record LOL Happy with the visit yesterday to the doctors. I am free to start walking. And that is not an easy task. A matter of going from part weight bearing to full. And as long as I can get to my lathe will be able to start soon. Thanks for watching, Gary

[@corymichaels8670]

That is great news about your ankle. I Know when I had my knees done I missed my lathe so bad that I bought a saddle stool with wheels. It was perfect. I was able to just roll around the shop and turn smaller projects. I do have a question for you though. How do you keep those holy strips from picking up dust or staining from the other woods like Padua or Blackwood? I have about 30 board feet of it that was a stor fall from hurricane Sally that I can’t wait to make good use of.

[@ThePapa1947]

Thank you very much Cory. I have thought about a rolling chair of sorts. Looks like I can start putting weight on that ankle now. So if I have a wood that bleeds I like to use spray lacquer. I put 3 or 4 very slight overspray type coats and that seems to lock it in. Basically those coats are not wet. Thanks for watching, Gary

[@holzweg666]

I'll be happy when you're back at the lathe and turning wood. This whole theory with some complicated programs, actually that's not the Papa1947 I knew and liked. I also sometimes ask myself where I should get all this wood. In Germany I pay 75€ for a piece of American walnut measuring 60x60x8cm, which is currently not quite 81 US dollars. For that you buy an entire forest from you. Get fit again soon and throw away the stupid PC. Schorschi from Germany

[@ThePapa1947]

Schorschi I will be back soon. I can not toss the computer as I need it to upload turning videos LOL. Take care, Gary

[@tschmath]

Thanks for the tutorial. Do you have a video of actually making a feature ring from a Laminate Pro design?

[@ThePapa1947]

Thank you for watching and commenting. Here is a link to making a turning like I showed in this video. kzbin.info/www/bejne/Y4Lcc6qCqs2FsKcI I did put that link in the video but if you are asking about just a feature ring then this is one. kzbin.info/www/bejne/d5ianoyOppWBpKc

[@dalekuhlman1009]

I’m certainly hopeful that you got the green light from the Dr. as people tell me all the time don’t over do it.

[@ThePapa1947]

Thank you Dale. I have the green light but I have to decide when that it is no amber. Testing for pain when standing is good and I will try the brace in a couple of days. Or I need to find a boot as tall as the orthopedic on I am using. Thanks for watching, Gary

[@WoodenItBeNice]

1st 😂😂😂

[@ThePapa1947]

Good to see you back to your old self my friend. You can go ahead and take your afternoon nap now 😁😂🤣

[@valeriehenschel1590]

So many patterns, so little time.

[@ThePapa1947]

For sure Valerie. But I seem to have a lot of time. Just can not use it the way I want LOL. Soon though!

[@valeriehenschel1590]

@@ThePapa1947 Same here.

[@jonmartineau1004]

I noticed you didn't post a video for last Friday ? We hope everything is ok up there . We also hope you are healing .

[@ThePapa1947]

Thanks Jon. I sent something out on the community board. You should have gotten a notice. Basically been working on putting weight on the ankle. Pretty exhausting but coming along. Just needed a small break....a time out 😉 I will be back. Thanks for checking in. Gary

[@jonmartineau1004]

@@ThePapa1947 We keep praying for a great recovery .

[@ThePapa1947]

Thanks Jon. I spent the week working on putting weight on the bad ankle. Doing pretty good. Did kind of wear me out so I took a break from doing a video. Thanks for checking in. Gary

[@hawkeye10100]

Good luck at the doctor's office.

[@ThePapa1947]

Thanks so much Don. The appointment went very well. Permission to put weight on that foot now. Gary

[@ClaytonsWoodArt]

Cool stuff Gary!

[@ThePapa1947]

Thank you Clayton! Take care, Gary