There is something I dislike about my enduro e-bike( watch before you buy)

Subscribe

[@CBlocks]

If u balance the wheels before u install them you can fix the speed wobble issue.

[@vwpac]

also on actual enduro bikes they iin stall steering dampers to fix the wobble ...the shimmy iis wheel balance

[@voodoochild6741]

@@vwpac I have seen a version of it on E-Bike guy bike's that hit over 70 mph.

[@rufusirvin5279]

Check your tire rim for true and also like a car, balancing. Make sure the spokes are about the same tension

[@KILOALXE]

Yo cut some nice vents and put 3 or 4 mini fans inside. itll solve the overheating ! 🙂🙂

[@LzyCube]

Thats actually what i did with mine, i made a vent and put in an extra fan i had for my PC. and i put a hood over it just in case it rains. works amazing

[@CaptainCurt07]

*I got basically same bike no front shake ( make sure fork bearings are correct and tight-put another tube in tire and make sure the tire inflates enough to set bead) I had to over inflate both tires numerous times! to get the tire bead to seat correctly you can take piece wire and see if rim is out of true and tire bead isn’t affecting this wobbling (100% check rim for true, then inflate tire and check if it’s seated correctly) I go 60 no problem no wobbling, my rear was the worst wobbling like crazy! but after getting tire seated and 3 days of trying to figure this out it was tire out of round from bead not seating, you may need put 60lbs air that’s only way I could get the tire to pop out I thought I was going blow tire up but it worked!,definitely big controller, I run shit out my bike and don’t overheat*

[@voodoochild6741]

I am with you. I wish the aftermarket would supply foot pegs!

[@ericthedesigner]

you can easily put a bldc motor on that bike. HIgh speed wobble is because of the rear swing arm with one shock creates an issue with the bike flexing. It happens to old harleys and idians too.

[@gabriele476]

hub motors are bldc, anyway i've read that some of those frames have rubber bushing and not full brass ones, that worn out and create play in the rear swing arm, could be the case. also wheel balance it's important

[@justincase3230]

Run a small motor Front and back, deals with the heating and weight distribution issues.

[@ENDOPRYSMyt]

One of these days I’ll have to make a dual motor bike.

[@justincase3230]

@@ENDOPRYSMyt love your videos man, I been building smaller scale ebikes a few years now and every time I watch your videos I end up doomscrolling for parts and budgeting half the night 😂

[@TheToolBoxWhisperer]

I cut a huge hole in the bottom of the frame originally to run all the wires but it also helps cool it. I’m running 72v 150amp sabayon controller. 70 amp hour battery.

[@ianmangham4570]

I'm running a shitty 22amp controller with a 48v 13ah battery 😅 ,but then my Marin homemade ebike is under 45Lbs 🤟 ,I'm overclocking a 250w geared hub motor 😂

[@elias8981]

Isn't cutting a huge hole in your frame bad for your frame integrity and strength?

[@ianmangham4570]

@@elias8981 Obviously it depends where you put the hole 🕳 🙄 not a problem there

[@batbix]

You can use a mid-drive motor on an Enduro frame with a Lightning Rods middrive kit.

[@elias8981]

How much is it ?

[@tacticooldennis]

I have a 72150 controller as well and mine shuts down while riding. I grabbed a oven thermometer and started monitoring temps. I was hitting around 170 degrees inside. I made a new side panel and put a fan in there and now my temps only climb to 140. Here's a video about it: kzbin.info/www/bejne/n6PIommrfNiYjLM

[@ENDOPRYSMyt]

I’m gonna check it out rn thanks. Edit - I may cut holes in my existing panels to allow the heat to escape from the frame. I think this should work.

[@oorgasmatron17]

@@ENDOPRYSMyt check it out to the rain ;D

[@ianmangham4570]

Guess the shaking is from the gyroscopic force's from all that unsprung mass of the motor 🤟

[@nicod974]

Also check the spokes tension and that the rim is true. Check your ball bearings...

[@ianmangham4570]

@@nicod974 babba BOOEY babba BOOEY 🤟

[@ENDOPRYSMyt]

Babba booey

[@ianmangham4570]

@@nicod974 🤠🙏🤘🙏

[@shehatesmigi4029]

They got a enduro e bike in Gta 5 now💀💀

[@ENDOPRYSMyt]

Lamo it’s real💀

[@EnduroEBikesCanada]

We offer foot peg conversion kits and custom built bikes that come with them

[@TotesRad]

How much are the foot peg conversion kits?

[@Killer-wu9hk]

Well already bought it so can't really do much, but let's see these reasons

[@ENDOPRYSMyt]

Pretty small stuff tbh

[@Smokey00]

They have a much better seat out there I forget the name but there's this guy on KZbin called Chris crossing wires that has one

[@ENDOPRYSMyt]

I saw that. Maybe I’ll get one for mine. Also it doesn’t cost much more either

[@calebbowling4137]

is this from the brand Enduro itself? like the 3000,5000,8000,12000 ones? green logo?

[@betepehap1713]

3:55 I hade same issue with shaking on high speed, and its not weight, its a bicycle front fork, I installed a srly cross motorcycle front fork and issue is gone even on higher speeds than I hade before.

[@ENDOPRYSMyt]

Good to know. I figured it had something to do with the light weight of the front forks.

[@voodoochild6741]

Have you tried Pegels regarding pedals I have the same feeling as well. Why have it? I think that people think its more "street legal"? I don't know...

[@gabriele476]

someone know the internal dimensions of the battery compartment?

[@ChrisBFerguson]

I think we have the same light set and same mirrors. Thought you couldn't get that light set on a 72V battery? Not without a converter at least? What do you think of mid drives? BBS02B overheats for me when I shift into higher gears. The thing about my mid drive bike I like is I get to use Tri Spoke Rims on it which have better flat protection than regular spoke sims so it makes a very efficient backup for me when I get a flat tire.

[@CBlocks]

I have 150a savaton and run it 100a

[@vwpac]

y dont you buy the foot pegs that they use on the stunt motobikes

[@mmavcanuck]

There’s no x in especially ;)

[@-lolus-]

to late m8 , already got one

[@ronbrown4551]

I keep wondering if the cops get after these bikes. You said the cops never bother you. is that even if you are going 50 mph ? What state are you in ? I used to live in California and I never had a bike that would go that fast, mine went to maybe 31 with 100 watts, so was never able to put that to a test, but I would have thought that maybe they would be all over me if was was able to go a fast as yours. I think your not supposed to go more than 28 mph, or have a motor more than 750 watts. Now I live in Utah and I have been thinking about getting one like yours, but even here I think that they may get me. Maybe I'm wrong.

[@BGR_33]

I'm not sure if I missed it or not but what rear fender are you using? Do you have a link?

[@ENDOPRYSMyt]

Look up extended surron rear fender on Amazon . You can cut it up at the rear and zip tie it and it works perfectly.

[@ENDOPRYSMyt]

www.amazon.com/LWL-Generation-Streamlined-Mudguards-SURRON-Black/dp/B09JP1692T/ref=mp_s_a_1_1_sspa?adgrpid=118008990475&hvadid=657248899603&hvdev=m&hvlocphy=1013655&hvnetw=g&hvqmt=b&hvrand=12438117497425410013&hvtargid=kwd-1183049721071&hydadcr=24286_13672426&keywords=sur+ron+rear+fender&qid=1689796244&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRm&psc=1

[@BGR_33]

@@ENDOPRYSMytThanks for the link & the reply! 👍🏾💪🏾

[@ChrisDaFarmer]

That's cause your setup sucks it's not the bikes fault 😂

[@ENDOPRYSMyt]

My setup is a common one. I think I mentioned that point in the vid but idk