These Are the Best FPV Stick Ends | *In My Opinion*

[@tinywhoopfan]

For thumb-only pilots, the Tinywhoop yucca tips are amazing!

[@Imboredasshell]

Nice to see this, didn't know how to produce these so I use to run my stick ends without a lock nut cause my fingers would move so much. Awesome to see you guys made them.

[@bradgibson1976]

@@Imboredasshell link? Please

[@SUPERCELLFPV]

This is the best idea in ages! I struggle so much with stick ends, still haven’t found the the right type.. maybe these will be “the ones” 👍

[@MattysDroneWorld]

Bro this is genius... I'm a thumber and have that exact problem with my thumbs constantly readjusting.... thank you for coming up with this idea, damn I'm stoked to try em out!

[@NorgeSquad]

I have the Five33 Rip Stick MCK on my throttle side. and the Versa on pitch and roll. I figured that's the best combo for me

[@ChrisHarmon1]

I had this issue a lot when flying 3D during piroflips. Going in circles while thumbing, I could feel my finger "walk" across the top of the stick. My solution back 15 years ago was to sharpen the stick ends with a file, but today I print them and leave them a little loose on the stick so that they can rotate. The downside is, I have to make sure they are about 1.5-2 turns out before I begin the day since they will tighten back up slowly, seemingly at an inconsistent rate depending on the type of flying I am doing.

[@butterflyfpv]

It is smart for sure! I want to test them.. Great work!

[@KalReifsnyder]

Love this concept!

[@antonioalemar5406]

I think you are definitively up to something awesome here! Thumber omni sticks please!!

[@Greg__K]

This has been something I've literally lost sleep over trying to come up with a design for. I had a similar idea, but it pivoted differently. Then decided anything that moves is probably too complicated for the size of a stick end, but your idea seems like a good solution. After 3d printing different ideas, I ended up liking the MCK stick ends the best, and a close runner up was the Grand Masters by Thumb grippies. A good idea that's worth exploring is the Crown Jewels by TBS. It has a curved out area for your pointer finger.

[@chriswellsclrk2265]

Ordered. Been wanting to try this concept out for a while now. Excited to see how they go…

[@oneleft163]

Really good idea one hand,thanks 👍🤟

[@FREEDOMFPV84]

Best idea man my fingers slip off all the time it makes sense I love this idea I'm ordering some right now thanks man 👍👍👍👍👍

[@baggszilla]

Genius!! I can't wait to try them out!

[@painy6588]

I always struggled with stick ends, since using a very specific 3d printed shape im alright but these stilll have me intrigued. Will probably buy once they are available in europe.

[@moidfpv]

Just ordered. My stick ends constantly come loose as I fly and I never understood why. I find myself re-tightening them mid-flight which is not great. Can't wait to try these!!

[@quadbrake]

The original 533 Stick ends were for me such a big improvement over stock that to think these new designs could even be better would be amazing! Also agree about the razor RM sticks. I can't use those. Tear me up! Lol!

[@OnepackFpv]

Genius. Must try.

[@DanRichmondFPV]

this is a great idea im a pincher and i unscrew my stick ends slightly to get this effect but always have to readjust and have looked for something like this before i defiantly think it will become the normal its even more useful for pinchers

[@ChainsawFPV]

Ordered a set last night. Kinda excited to see if this will solve my "slipping" problem. As a hybrid "pincher", hitting the corners of sticks means constantly repositioning my fingers, which causes me to loose my line.

[@minusdream440]

Quote that

[@baggszilla]

I got a set too buddy!

[@ChainsawFPV]

@@baggszilla Nice!

[@painy6588]

​@@baggszilla aand how are they?

[@bradgibson1976]

Best idea ever kudos.

[@99_Bananas]

I printed 4 different sticks on my printer yesterday I went for the big spiky balls for pinch grip. If you’ve got some 20mm 3M screw’s you can make try a variety out of

[@romanhunak]

What material did u use for 3d print? I am new to 3d print, but had already the idea to print some custom sticks.

[@99_Bananas]

@ I just used some PLA, it’s the most commonly printed material and pretty much all printers can handle it. If you search google for Radiomaster Pocket Stickend collection STL it will pop up. Let me know if you need a hand with anything!

[@josefdahari]

I mean that would be pretty dope for the hybrid pinch sticks for sure this way it kind of goes with you and the indent everywhere you go if that makes sense

[@headsupfpv]

Making it happen now!

[@josefdahari]

@headsupfpv good stuff my bro. Let me know I'll grab these things immediately! I like the innovation man!

[@CantFly_FPV]

This is definitely innovative and I'm going to order a set. I'm hoping they will solve the issue I have where my finger will either slip and I have to re-adjust or my finger won't slip and it sometimes causes my stick end to spin and become loose. So now whenever it happens I get paranoid and have to not only re-adjust but check my stick end is still tight.

[@headsupfpv]

Been there!

[@grabejud]

awesome fidget stick idea

[@edclevel402]

Great idea - I'm in.

[@محمدعترانآلالحارث-و9م]

That's a very good idea.💙💙

[@nappyfpv]

Hmmm IDK I needed new stick ends lol. I've been flying the Rip Sticks for a long time , and love them.

[@darksheepvids]

I will give them a shot always have the same issue

[@fpvgivy]

wow....game changer! 🕹🕹

[@SirCrashaLot]

I modded ones in the past and came to similar idea. Never took it further because I would not be able to get replacements quick. I guess I can now :)

[@xyic0re714]

Getting that right thumb position when you first take off sometimes feels like its more important than the tune. I'd really like to try these.

[@1upFPV]

i need these ASAP to go with my five33 gimbals

[@FebyKris_FPV]

I thought I was the only one experiencing this and having to re-grip the stick end...but my temporary solution was to loosen my stick end a lil bit so it would rotate like you demonstrated...

[@headsupfpv]

You’re definitely not alone!

[@scottmilano2940]

Interesting experiment. This would be better for the thumb, but worse for the index finger. So good for thumbers and hybrid pinchers. Another interesting angle might be dished stick ends, like an xbox thumb stick.

[@tito9107]

Pinchers: 😎

[@daviddepuy9843]

Placed my order. I've always thought of designing this. Now I don't have to. Lol

[@foxvalleypcgeek]

The metal ends on my Junper T15 bother my thumbs after like 10 minutes and same with the Remote 3 for my Avata 2. I don’t know if they are 3 or 4mm sticks though haven’t found any info on size.

[@headsupfpv]

They definitely get old fast!

[@JoeMommaFPV]

great idea! I'd so be down to try it. But I hybrid pinch, would be legit if there was an option for those stick ends from you guys. The finger slide that you experience with your thumb I get on both fingers, and readjusting mid race screwed me up so many times.

[@headsupfpv]

Making hybrid punch now!

[@JoeMommaFPV]

@@headsupfpv HELLS YEA! Let me know when they are ready for prime time, I'll order ASAP! YOU DA MAN!!!

[@APS-yo8oy]

Jus ordered a set of

[@demofpv]

As a thumber I use umbrella stick ends. Which one of these would you suggest for a thumber? Or will you design some with a wider top in the future?

[@headsupfpv]

Both have a very wide top to fit the bearing inside so I don’t think you can go wrong with either, but I think the flat top have more spikes which may be nicer as a thumber !

[@erikj5626]

I’m not a pincher I only use my thumbs. I’m wondering if these would work for me, I love the idea tho 👍

[@headsupfpv]

Absolutely! There is personal preference in anything, but no reasons thumbers can’t like them!

[@jbaked2585]

I was noticing the Xbox elite series 2 sticks do this, and I was wondering if the concept had made it to fpv.

[@headsupfpv]

Ooo sounds cool! Do you have a link for them?

[@MattysDroneWorld]

ORDERING NOW! hahaha

[@darksheepvids]

Quick question is the price for a 2 pack of stick ends on the site I could not really tell ?

[@headsupfpv]

Yes it’s for 2 stick ends!

[@bluefpv3263]

do you think this works for thumbing too? i just had a a crash where i sliped of the throttle stick while doing a juciy flick ^^

[@headsupfpv]

I think it would definitely feel different at first, but 1000 percent could help prevent that from happening if your finger maintains better contact like this.

[@carlosfuhrer]

Question, will these work with the standard radiomaster boxer gimbal protector? Will they fit?

[@headsupfpv]

Yes! Select M4 thread and will thread right on

[@boydsleator9075]

Anywhere in the UK or Europe stocking them? Delivery is a killer.

[@headsupfpv]

We will get them in EU stores asap!

[@jf5336]

Noob here....very interested in these ends, but not sure which one to get for my controller. Could you put a compatibility chart on the page so people can be sure they buy the proper size?

[@headsupfpv]

Sure ! i will work on that this week. In the mean time, let me know what radio you have and I'll tell you which thread size the stick end is.

[@jf5336]

@@headsupfpvI have a hand-me-down TBS Mambo but would welcome your recommendation for the best whoop controller. I'm hearing a lot about HD Zero and considering it for whoops...but am not sure how that might affect controller choice--other than maybe needing an exterior module? Much to learn and it gets confusing, so I very much appreciate you taking the time to answer me. And I'm sorry I missed seeing you race in Houston.

[@jf5336]

Sad to not get a response from Evan.

[@geordil]

clever!

[@grzbiet]

isn't it the same as if the locking nuts were lose?

[@headsupfpv]

Kinda? Only problem with running a loose lock nut is eventually the stick would end up at a different height of course. This solution allows you to lock in the height and have a free spinning top

[@ergonomiczero2228]

Make these for the Xbox!

[@headsupfpv]

That sounds cool!

[@Badger_FPV]

Will try then when they in Europe 😂

[@DigitalCruzer]

I've had my ends come loose, or i knocked them loose before and my thumb rolled right off it during a sharp maneuver, i assume i need them tightly locked, or that's what I'd think, I'd have to try them for sure, but i probably wouldn't buy them to see... Also I'm a thumber, it might be ok for hybrid like Mr. Turner with the index stabilizing them. Wonder what the return policy is if thier found to be unusable, lol

[@DigitalCruzer]

Interesting and neat innovation though if it helps some people...

[@headsupfpv]

If you try them and don’t like them, happy to process a return no problem for full refund

[@DigitalCruzer]

@headsupfpv awesome, I'm getting your lil flipper, which style do you recommend for a Thumber? I don't pinch at all, lots of nerve and tendon damage in my hands due to injuries my index figures can't reach up there at all, but my thumbs are fine

[@fededabz]

20 bucks for just stick ends? Dude.

[@Mattylite_FPV]

I don’t think they are overpriced at all. There are a lot of stick ends on the market that are the same price.

[@daviddepuy9843]

You gotta think about the labor involved with each one of these. Post print clean up. Inserting the press nut and bearing. UV curing them. All of that takes a little time. Plus the consumable cost of materials. It's not gonna be free.

[@sashabagdasarow497]

Your thumb actually moved even with those sticks. So... No that much I guess.