These Christmas Decorations are made from Light Bulbs!

If you’re looking for an original gift or a Christmas decoration, just go to a recycling point and get a few light bulbs :)
In this video I show you 3 awesome Christmas decorations that are made from light bulbs.
You’ll need to hollow out the bulb or at least make a hole in it to let the air out.
I used a nichrome wire to cut a bulb in half.
Nichrome wire has a high resistance. If connect it to positive and negative terminals of a battery, it will heat up.
It also depends on the wire you use as well as the battery.
I used 32 gauge nichrome wire and a 20v battery.
The wire will get extremely hot, so be careful not burn yourself.
We made a glass ball ornament, candle shade and a snow globe.
Copper tape: ►amzn.to/2hANc1z
Nichrome wire: ►amzn.to/2AXxlGd
Silicon Carbide Grit: ►amzn.to/2gGkfPP
Glass Etching Cream: ►amzn.to/2gQ6mBM
Plaster of Paris: ►amzn.to/2hAJSDK
Dremel Diamond Wheel: ►amzn.to/2hLrZVD
Dremel EZ Lock Mandrel: ►amzn.to/2hzdkfr
My KZbin Setup 📷amzn.to/2gutrvw
Tools I use 🔨amzn.to/2guylsx
----------------------------------------------------------------------
Music:
Canon and Variation by Twin Musicom is licensed under a Creative Commons Attribution licence (creativecommons.org/licenses/...)
Artist: www.twinmusicom.org/
----------------------------------------------------------------------
Warning: Use this video content at your own risk.
----------------------------------------------------------------------

[@amandeeptoora]

Loved the way you cut your bulbs, never seen it anywhere

[@ShakeTheFuture]

Thank You Aman!

[@amandeeptoora]

Shake the Future :D

[@elsaguely2338]

my fave was the last.... Pretty cute

[@ShakeTheFuture]

My version of DIY Christmas decorations :)

[@slawor4]

Shake the Future I guess I'm not first

[@ShakeTheFuture]

You are the first viewer to comment.

[@pogba879]

Shake the Future great video as always

[@ShakeTheFuture]

Thank You very much!

[@finlandfinny5409]

Shake the Future

[@pyushyt8989]

All are the good but last was the best

[@MadScienceHacksTV]

These are really cool! A very well done video. I love the trick to cut the bulb! Genius!

[@ShakeTheFuture]

Thank You!

[@Debvely]

Hello, do you think this method could be useful to cut little cristal medicine ampoules (the ones you have to break to take the medicine with a syringe)? Or is there some easier way to do it since the glass is so thin? I have in mind some miniatures i would like to try with cristal ampoules. Thanks, hope you can respond. Loved your ideas ❤🥰!

[@ScrapwoodCity]

Awesome ornaments, I love the third one!

[@ShakeTheFuture]

Thank You!

[@slawor4]

Last one was pretty cool

[@ShakeTheFuture]

Cheers! It's my favorite.

[@ShakeTheFuture]

Cheers! It's my favorite.

[@riaaggarwal828]

I like the snow globe a lot

[@hughjanus3798]

Awesome. What could you create with those long fluorescent bulbs?

[@ShakeTheFuture]

I have never tried to make something from those bulbs, but I might give it a shot. Thanks for the idea!

[@shimaarageh9360]

sick ideas, love all of them!

[@samvicisa]

Excelente labor, se necesita creatividad y paciencia....Gracias por compartir....!

[@ShakeTheFuture]

Gracias!

[@TheHayes32]

Awesome ideas. I love them all.

[@ShakeTheFuture]

Thank You!

[@elizabethnichole2372]

I wonder if there's a way to use a battery to cut the bulbs

[@rajendrakumarnagaich9107]

I loved the last one

[@killerbeauty19]

I love the ornament and snow globe! I need make one of these.

[@ShakeTheFuture]

Cheers!

[@avinashsambre4791]

Thanks for sharing such a great idea of cutting a bulb..

[@sandorpecsora2434]

Last one was amazing!!!

[@ShakeTheFuture]

Cheers!

[@SpecificLove7]

I liked all of them, well done.

[@ShakeTheFuture]

Thank You!

[@CrankyPantss]

Your projects are always very unique. Good job.

[@hillmannkurt9128]

Good job on all of them

[@ShakeTheFuture]

Thank You!

[@pdelmercado]

Very clever. Thank you for the tutorial and inspiration.

[@ShakeTheFuture]

Thank You!

[@markandrews70]

Very inventive, well done

[@ShakeTheFuture]

Thank You Mark!

[@shrisaiinfotecktally5486]

Lovely

[@i.g.noreme825]

I think I liked the first one the most. There is beaty in simplicity.

[@ShakeTheFuture]

That's my second favorite. Cheers!

[@bernhardfriedl5904]

very nice ideas

[@superalvin7208]

Good job man! I like the way you cut the lightbulbs

[@ShakeTheFuture]

Thank You!

[@charmsbonee]

Shake the Future I love how creative you are I've never met anyone like you

[@torur_ptur_fan1236]

Great video mate!

[@ShakeTheFuture]

Thank You!

[@torur_ptur_fan1236]

Shake the Future No Problem bro

[@venkiarvind8932]

Very nice

[@Nixola97]

Very nice! I'm thinking about making one or two for my girlfriend. What's the chemical you used in the second one, and what exactly is the mix in the third one?

[@ShakeTheFuture]

There are links in the description. It's armour etch cream. I actually bought a cheap rubber snow globe for 2$ and I took it apart to get the snow and liquid. It was cheaper that way. If you want to make your own water+glycerin mixture then you only need a dash of glycerin. Something like 95% water 5% glycerin or 90/10. It's best to mix it in a cup. Add a little bit of glycerin until you're happy with the result. Cheers!

[@hstechfriend9911]

Sir you are great

[@aidanallen4955]

Snow globe was my favorite! Such an awesome video!

[@ShakeTheFuture]

Thank You! I am glad you enjoyed it!

[@TemperedStorm]

very creative

[@ShakeTheFuture]

Cheers!

[@opasworkshop8373]

awesome job my friend that took a lot of time and effort to get those cut perfectly like that great idea on the electric wire thanks for sharing.

[@ShakeTheFuture]

Thank You very much!

[@sebastianortmann4728]

you deserve way more subs! what was the voltage of you drill?

[@pogba879]

Zero dislikes just means that everyone loves your content

[@ShakeTheFuture]

There is always somebody who does not :) Check back in an hour or 2 and you'll see that there are people who dislike the video. It's always like that.

[@charmsbonee]

Shake the Future yeah 3 in 2 weeks

[@nineten1416]

TheLegend27 ! 3 dislikes

[@PUBGGamer-fk8ll]

Last one

[@nuwbers]

I'm still waiting for that masterball

[@ryyaansheikh9422]

Good video 😁

[@ShakeTheFuture]

Thanks!

[@tamivevurka]

You are so cool

[@calonico9470]

Another brilliant video my friend! 😀

[@ShakeTheFuture]

Thank You Calo!

[@Bandit_6oo]

i love your videos

[@ShakeTheFuture]

Thank You! I am glad you do.

[@KnowledgeWorld-pt7nb]

very nice

[@ShakeTheFuture]

Thank You!

[@AnitaKumari-yw5cw]

nice video

[@560tomas]

where did you get fake snow? I love your videos, tnx

[@ShakeTheFuture]

I went for the cheapest option. Instead of spending money on glycerin and snow, I bough a cheap rubber snow globe and took it apart. The snow is made from plastic. You can make your own snow with thermoplastic (like Instamorph). Melt some plastic together and use a utility knife to make snow shavings. The shavings can't be too thin or they'll float on the water. A lot of people use glitter, but I like the plastic snow better. Cheers!

[@Grizzly_Lab]

Veeeeeeeery nice all three of them, indeed ^_^ And happy holidays, too ;)

[@ShakeTheFuture]

Thanks! Happy Holidays to you too!

[@1999colebug]

Everyone here, please PLEASE wear gloves when doing this! I can not stress how important that is! Glass may seem not sharp or you feel like you have it. Let me tell you, I thought so too until I destroyed my hand.

[@ShakeTheFuture]

Yes, wearing gloves is always a good idea. I have done it many times, so I don't wear the gloves all the time as I rarely cut myself. Thanks!

[@hillmannkurt9128]

My mom would love this comment! I agree

[@nuwbers]

Colebug99 yes glass is unexpectedly sharp af

[@finlandfinny5409]

Snow globe

[@LesTutosdUneMinute]

CONGRATS FOR THE 100 000 SUBS!!!

[@ynzeselders4184]

Luckily you didn't short out your battery when you let go the leads.

[@ynzeselders4184]

I like how you cut the glass though.

[@ShakeTheFuture]

Yes, it's something you want to avoid :)

[@emadaledn8880]

ياريت يكون فيه ترجمه باللغه العربيه شكرا

[@Corinth1311]

If you ever did the snowglobe again, how might you combat the air bubble?

[@ShakeTheFuture]

I would use ceramic figurine or make my own from clay. The figurine I used was made from soft, rubber-ish material. I believe there was some air in the figurine.

[@mithunrajroy281]

mithun raj Roy

[@jaked5651]

My mom paints them like snow men and ties a string to them. Lame but makes really nice ornaments.

[@ShakeTheFuture]

I am sure they look awesome!

[@namitadash294]

Awesome but dangerous

[@thetraindriver01]

All ok, but Olaf was the best 👌

[@ShakeTheFuture]

Thanks!

[@XAVIERCUERVO]

when did MacGyver get a channel ?

[@asirisampathfernando8677]

nice but very hard and bad

[@riyashivhare5687]

Ek no bkvas h 😞😞😞😞