2011-2016 Ford F250/F350 Super Duty Lariat/XL Seat Cover Installation

[@gregorysoderlund8025]

I have nothing but good things to say about these folks! Customer service was amazing. I ordered a replacement cushion and hog rings and hog ring plyers. My truck doesn't have hog rings. They called me the next day after I ordered and said that my application doesn't require hog rings and asked me if I'd like to cancel hog rings and hog ring plyers, I felt a bit embarrassed lol and said thank you and yes id like to cancel since my seat doesn't require that. Yes I did contemplate because I wanted more tools lol. Amazing folks and amazing products. Thank you again 😊😊😊

[@TheSeatShop]

We appreciate your business and the kind words!

[@caseyrayls6234]

This install on a 2011 F250 XL (not an XLT, Lariat or King Ranch) which has NO power anything, is very diff from the above video. I saw no advantage to the steaming (with a clothes iron). I'd have gladly paid a shop $100 to install it. It took me 2:05, and I have better shop tools and mechanic experience than most guys. Def. need an impact to speed things along and small torch to burn thru the material where the bolt holes are as nothing aligns exactly right.

[@joshsosbee8820]

Thank you so much for showing where that screw is that holds the back of the side control panel plastic. My seat leather is fine I just had the typical broken tab at the back and bought a new side control panel housing. Huge help!

[@chrisanyzeski3117]

Just got my replacement seat cover for my 2012 lariat with a/c heat. Installation was easier than expected thanks to this video! The match is perfect, I couldn’t be happier! Installation took me around 1.5 hours to do the bottom seat start to finish. The steamer trick was amazing!!!

[@TheSeatShop]

Hi Chris, thanks for your feedback and support! We're glad we could help you out. If you happened to take any before and after pictures, feel free to share them with us by sending them to our email, [e-mail].

[@edemerick1889]

I just replaced the driver seat in a 2011 F-250 gray vinyl and the match was perfect. The instructional video was perfect. I'm a happy customer and will be making you guys known here in Ohio. Thank you!

[@TheSeatShop]

Hi Ed, We really appreciate the kind word and support! You're very welcome and let us know if you have any other questions, we're always here to help!

[@stevegrapes5]

Perfect. I followed you step by step and my install went great!

[@TheSeatShop]

Great, glad we could help you out!

[@jonlewis2369]

Just replaced my 2012 and these instructions were spot on! Thanks

[@TheSeatShop]

Thanks for the great feedback, glad our videos were able to help you out!

[@466htrd]

I'm in the process of doing this on the drivers seat in my 15 F350 XL with manual cloth seats. The steel clips that hold the lumbar adjustment knob, and the back rest lever on, are a PIA to get to, and remove.

[@johnrogers8229]

Great Job! Very intuitive! Thank you.

[@TheSeatShop]

Hey John, we're happy to help and thanks for the support!

[@brianweis5703]

Great product and great support. Thanks!

[@rylanpowell5683]

Still no durafoam for these? Been waiting a year now to re-do my seat and it’s terrible now

[@SELKCOMM]

Extremely well done. Thank you.

[@TheSeatShop]

Hi Tom, thanks for the support - we're happy to help.

[@richardperry21]

Ty good video

[@blueoval79]

Do you offer the grey cloth for top and bottom for the center jump seat?

[@terrybryant]

Curious if this will work for my 2013 F-450 platinum drivers seat bottom? I have my new seat cover but this looks like a lot of work.

[@TheSeatShop]

We have the drivers' bottom foam, but no covers for your vehicle.

[@AnthonyMachado-35]

2016 Ford F150 Lariat Supercrew - Do i need to remove the seat from the vehicle to change just the top back cover? Thank you!

[@TheSeatShop]

You can do ANYTHING you set your mind to! But in all seriousness, removing the seat from the vehicle just makes it much easier because you can move the seat around instead of crawling around inside your truck trying to get the cover on.

[@scottquenstedt1]

What do you charge for this seat (both covers) if I send it to you?

[@leroijr407]

Hi brian. Does the 2011-2016 f250 XLT seat covers fit the XL model? Some are claiming they wont fit. If anyone knows, its you. Thanks.

[@TheSeatShop]

Would you mind sending us your VIN? Send to [e-mail]. Thanks!

[@jeremeymimbs5511]

Would seat covers for a 2019 f350 work on a 2011 f250?

[@TheSeatShop]

No, they will not, unfortunately. Ford made new foams a few years after 2011 and they are also dependent on if you have heated and cooled seats or not.

[@iamthesoccerbeast]

If I just wanna replace the top part do I have to take it out of the truck

[@TheSeatShop]

Yes, as it would be the easiest way to go about the install process.

[@2fast4u587]

Just did the back also because of airbags and it’d be so hard to do it in the truck

[@zachbrannon8195]

Elaborate on the button on backside needed to be pressed to release harness clip on inside wiring harness. Attempting to unlatch second one on my 2011 F250 diesel, can not find that button prior to clasp releasing.

[@zachbrannon8195]

Got it nevermind. Thanks. Rewatched.

[@DavyDavis-w2e]

Where can!i get one

[@TheSeatShop]

Hello! Visit us at www.theseatshop.com/

[@renemartinez6355]

I need the driver fome for a Ford F-150 2016 replace the please

[@renemartinez6355]

$

[@DavyDavis-w2e]

Send me an address to get one please