C7 Corvette Stage 3 Front Splitter Install - Extreme Online Store

[@Team512]

Why do you guys think of the Extreme Online Store front splitter and stage 3 winglets?

[@YellowVette04]

🤤😍🔥😎💦

[@dcrump]

I think you and JUSTIN lol just sold me on it 😂 💪💯💯.... nice look

[@Team512]

👍

[@stevenrich1819]

Why do we think of what?

[@Fgr63]

Mine is now installed. This stage 3 is so impressive!!! It looks like very nice and it is very surprising to notice how the steering of the car is now much heavier when driven. I like that!!!

[@Team512]

Very nice!

[@nallen6559]

Just sold my 08 C6Z and am on the hunt for a C7, an always want thing! You guys sold me as I move from hunt to buy to upgrade. EOS seemed great product, good alignment. Nice video, very simple to follow and well done....Thx!!

[@HorsePowerObsessed]

Definitely looks wayyy better! That stage one shouldn't be stock on a car that costs this much!

[@Team512]

Thanks man! I totally agree. The car looks so much wider and more aggressive. Good quality product too.

[@zuzuki22liter16]

Ive never seen a GS with your color combination and the front red hood vent. I like it.

[@Team512]

ZuZuki22 Liter Thanks so much! It was love at first sight when I first saw it. Do you have a Vette?

[@zuzuki22liter16]

@@Team512 wish I did but unfortunately I dont. I will gladly take your C5 Corvette LOL

[@Team512]

Lol. Not ready to giver her up yet...

[@YellowVette04]

Splitter, winglets and red accents all look great. Bunch of nice shirts in this video too 💪.

[@Team512]

YellowVette04 Thanks man! Forgot to add the link to my shirts! 😂

[@YellowVette04]

@@Team512 🤣, TEAM512 for 5% off my shirts 👍

[@Team512]

YellowVette04 Forgot again...I’ll fix it.

[@alanblasczyk1779]

Looks hot Scott. I hit a wild turkey once with a new generation Dodge Ram and that bird did over 1K Damage to the headlight capsule..LOL.

[@PLLuxuryReviews]

This Mod has taken the car to next level !Yes look really nice

[@Team512]

Thanks!

[@tbonepachanga]

The factory splitter is strong but is fiberglass.... I scraped manny times... you can’t help it.... it sucks... but it look so good... i have a gs now is my 4th corvette... love it! 7spd lt2 white with red interior like my stingray.... i like this channel bro!!! Good work!

[@Team512]

Thanks man! Great color combo on the GS!

[@tjstoyshop6678]

Great video, Scott! You do such a great job with just the right amount of detail. I ordered this splitter with stage 3 winglets from EOS after watching your video! My plan is to get mine installed tomorrow! Planning to use this video as my “How To” guide. Who needs installation instructions!!!! 😂

[@Team512]

That’s awesome! I love the stage 3 winglets on these cars. Gives the front a wider meaner stance.

[@StreetProduction303]

Looks 1 million times better!! I cant wait to get mine finished and pin striped!

[@Team512]

Yes! Can't wait to see it. That pinstripe is going to look 😎

[@Ggotskillz7]

Team 512 New to the channel. I love the red pinstriping. Where do you get it from? I need it. I have. 15 Z51 Shark Grey C7 with Stage 3 Carbon Aero. I need some color homie.

[@Team512]

Red pinstriping on the aero of Shark Grey will look killer. www.amazon.com/gp/product/B01M0ZU5BN/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=team512-20&creative=9325&linkCode=as2&creativeASIN=B01M0ZU5BN&linkId=2bd17f783a51f932223e70456bf1e86a

[@markp3296]

Just saw your video now - the red stripe looks awesome! Perfect match for the rest of the car. I've seem the blue with red stripes and it just doesn't pull it off like yours. I bought a used Watkins Glenn Grey M7 GS last May. I almost pulled the trigger on your exact color combo - it's a great looking car that you don't see often.

[@Team512]

Thanks for the kind words! And congrats on the WGG C7! One of my favorite C7 colors. Have you done any mods yet?

[@markp3296]

@@Team512 I installed the Stage 2 rear spoiler. I did pick up red seat beats after seeing your, and The Corvette Channels', seat belt replacement video. I appreciate the step by step instructions. After that is the front splitter.

[@Team512]

@@markp3296 Those are great mods! Have fun and take your time on the seatbelts...They'll look great against the Watkins Glen Grey for sure!

[@FlyTrap7777]

Hey Scott, thanks for this video. As you know mine came today. Looking forward to getting it on the GS this weekend. Thanks...

[@Team512]

Gonna look great!

[@JUNJUN-lw2vr]

You did great on the install. Plus having a garage like that is a plus. Nice job!

[@Team512]

Thanks so much! It made a big impact on the overall look of the car. Thanks for watching my videos too!

[@jpsartre3200]

Thanks for swift response. Being I'm not taking my Grand Sport to Daytona, I'll just secure it with 7mm bolts and self tapping screws to replace rivets, which I think is a GM flaw.

[@Team512]

Always happy to help! You should be good to go. Even to Daytona!

[@joelevesque8047]

Thanks for the video. Just purchased the stage 3 carbon fiber kit. Love your car!!

[@Team512]

Awesome! Thanks so much for the kids words.

[@stingk5295]

Installing mune this week Buddy!

[@Team512]

Nice!!!

[@djsthemetereman]

That's one of the toughest corvettes I've seen, the red & black sets it apart, & the splitter with the red trim around it tops it off

[@Team512]

Awesome man! I appreciate the kind words. We love it too!

[@markdupre4854]

really like the red stripe! nice job

[@528Circle]

Love this rig, Scott!

[@petercarey6883]

Great upload Scott. RIP Stage 1 Splitter. Maybe you should frame it and turn it into garage wall art. 🤣 This install is a PERFECT compliment to your GS. Maybe now you should consider a ZR1 hood. Hmmmm, and then . . . . . . . MORE POWER!? 💪 In the list of things you might catch it on, you might want to add pieces of an 18 wheeler's re-treads. Before I install my THIRD CF splitter, I need to find some sort of Sonar Early Warning System. In the meantime, I've got the most gorgeous CF wall art in the neighborhood. Oh the humanity. 🤣 Save the Wave

[@Team512]

Thanks! I was wondering what I should do with it. If I can find some unoccupied wall space, I’ll throw it up there. Might have to move my Snap-On calendar from circa 1996 😂 3 CF splitters!? Oh my. I’d have to start a special splitter fund.

[@petercarey6883]

Yeah, THREE F"N splitters! No mas. I think I need a GoFund me page. 🤣 Have a great weekend.

[@user-zt3zq8uf1z]

Love it, keep up the great videos 👍

[@Team512]

Thanks man! Appreciate the kind words!

[@joelpierce3940]

Unfortunately I picked a stage 2/3 front splitter from a Corvette Dealer and when I got home I discovered an obvious blemish, divot which was painted over. I took it back and the other two that were in stock also had the molding flaw. I also looked at one installed on a car in the show room and it had the flaw. Poor QC! You get what you pay for. They were marked extreme online store. Probably going for ACS.

[@stevebader6385]

Thank you for the video but why the tape? With all of those fasteners it doesn't like the tape adds much if anything and moreover will complicate the inevitable removal and replacement when this one gets beaten up.

[@jpsartre3200]

Why is everyone using double sided tape in addition to all the bolts and rivets that hold the splitter on?

[@Team512]

Good question. Personal preference mostly. The foam on the mounting tape does fill any gaps nicely and prevents air penetrating between the splitter and the body.

[@joebanyas3461]

Like the red strips it really accents the grand sport well

[@Team512]

Thank you! I like the red accents too!

[@markwilliams6785]

My torq screw washer is to wide for my winglets. Will have to modify to fit.

[@khaledelajam3043]

I used washers on the bolt heads that attach the winglets to the splitter. I drilled the right size holes on the splitter, but the cutouts on the winglets were too wide for the bolt head.

[@obsessivehobbies5464]

First time you hit it it hurts pretty bad. But once you get the first hit in it's not so bad haha. My problem is mines all carbon fiber.

[@Team512]

I’m not looking forward to that day...Yeah I’d be extra careful with a full CF one. Lol.

[@MichaelGreco]

Thanks for the video! The winglet are a good price, how do they compare to oem quality? I damaged one of mine and need to replace

[@dcrump]

I think you and JUSTIN lol just sold me on it 😂 💪💯💯.... nice look

[@edmaguire1012]

Just like Xmas, aye.

[@darrelnice376]

How did this splitter hold up? Does the paint chip easy?

[@Team512]

It’s held up great over the past year. No chips. Still looks good.

[@darrelnice376]

@@Team512 Like you, I have a stage 1 car . I want to add stage 3 parts and thinking just get everything from Extreme Online. Based on what you have seen from GM OEM and others does Extreme seem good enough quality?

[@Team512]

@@darrelnice376 So I get this question quite frequently. I was even talking with someone at Corvettes at Carlisle about it yesterday. In my experience, the fitment of the parts from EOS is just as good as anyone else. I personally had no issues installing that splitter. From a construction perspective, the splitter has held up just as good as any of the other parts, and the carbon flash paint looks as good as it did when it was new. After install, you (and others) don't spend too much time up close and personal with the parts. So even if there is a question on quality, it would be difficult to pick out. And after a few hundred miles, you're bound to end up with some imperfections anyway. And I consider aero parts, particularly front splitters, as consumables. I'll be carrying EOS on the site, five12garage.com very soon. Hope this response helps. Happy to answer any other questions: [e-mail]

[@claudeperrault4164]

Good video! Good explanations! Did you put red vinyl at the bottom of your car or is it red paint? If it is vinyl, can you provide me with the details on it? Thank you!

[@Team512]

Thanks for the kind words! It’s red vinyl pinstriping. You can find it on Amazon. Very inexpensive. Check the description for a link.

[@jpsartre3200]

Hey, when you removed river heads w/ screwdriver and hammer, how'd you get rest of the rivet out?

[@Team512]

No secret trick to that one. You can fish them out, or let them naturally find their way out.

[@SilvernFit]

WOW!!! Looks Sick!!!!!

[@Team512]

Thanks Rich!

[@svsgroup6066]

How has the front splitter and wings held up I want to get one but the car is tracked will it hold up to that beating

[@Team512]

No issues whatsoever, even after some time on the track. I do have it xpel’d tho.

[@svsgroup6066]

@@Team512 thank you

[@jc19vettec33]

I have a 2019 Stingray Z51. I installed this same exact set up but without the side front splitter wings. The 3 original screws wont fit through holes on side wing. I wish they would've sent new screws with a more narrow head.

[@Team512]

Are you referring to the 3 T15 Torx screws on the inner fender? They can be difficult to line up during the install.

[@jc19vettec33]

@@Team512 yes Sir and being that my front fender dont have that extra lip that a Grand Sport or Z06 have it makes it even worst. It leaves a gap for that side fender trim. I'm actually in touch with them to see if they offer another one that sits flush.

[@Team512]

Ah gotcha. The stage 2 winglets might work. They might also have a stage 3 designed for your front fender. Either way, stay healthy and enjoy that car man!

[@jc19vettec33]

@@Team512 Will do. Nice videos! I just subscribed.

[@Team512]

Thanks! I appreciate the kind words and support.

[@dannyrichardson1443]

That red strip really set the car off. Is that just red tape.

[@georgegonzalez9813]

Where can I purchase this wind splitter? The link does not work🙁

[@dcrump]

Thinking about doing this now...

[@Team512]

It’s a great mod. The stage 3 deflectors really complete the front end of the C7. They the give the car more width from the front view. 👍

[@nathanwilliams6403]

How did you apply the red pen-stripe?

[@yousefalkhudair4420]

My front lip doesn't have holes, can i still install that winglet splitter ?

[@Team512]

Which front lip do you have?

[@yousefalkhudair4420]

Five12 Garage for Z51. There are no holes in the lip, just solid carbon fiber

[@Team512]

Are you considering adding the winglets to the sides of the splitter? Is it the stock GM stage 1 splitter, stage 2 splitter, or an aftermarket splitter? If it’s an aftermarket splitter, which one do you have?

[@yousefalkhudair4420]

Five12 Garage oh my God it's too complicated I'm just a new owner 😆

[@Team512]

Lol. Send me an email with a pic of your front splitter. [e-mail]

[@duke-qx8cm]

should u remove the air dam underneath ?

[@Team512]

Good question. I left it on in hopes that it will continue to send air to the radiator.

[@chestergoode7966]

What is the part number for the red pinstripe you used? Looks awesome...

[@Team512]

Thanks! There’s a link down in the description for the pinstripe tape I used.

[@PatsGarageOnline]

Looks great!

[@Team512]

Thanks!

[@anthonyaztiptoenailsandspa7259]

Scott, Where did you get the red stripe and how did you put them on? That looks sick!

[@Team512]

Thanks man! It’s just some 1/4” pinstripe tape from Amazon.

[@siabdawbsiabzoo]

How do you get the red strip on the splitter. Paint it or decal?

[@Team512]

Pinstriping tape from Amazon!

[@siabdawbsiabzoo]

Thank you

[@Brett_Nebraska]

If you already have a stage 3 splitter, Can you install just the deflectors ( a new stage 3 deflector due to scraping the old side deflector) without lifting the car up)?

[@VegasRAOF]

Where did u order that flint splitter and winglets

[@YingYangStang]

Tape is good where did you get it and get you get different colors - also, did EOS suggest the sticky tape on the top of the splitter ...? Did it come with tape, mine didn't ...? Also, they delivered me two broken parts and they had to send out new pieces but it was not an issue and they did not want the broken was back ....

[@Team512]

I updated the description with a link to the pinstriping tape I used. And it comes in different colors. I don't remember if EOS suggested the double sided tape, but thought it was a good to prevent any sagging. I put link in the description for that tape as well. Bummer to hear about the broken parts. Did they ship the new ones in a timely manner?

[@Ggotskillz7]

Team 512 Wheres the updated link? I need the pinstriping

[@Team512]

Sean Webb It’s the second link in the video description.

[@Team512]

Sean Webb www.amazon.com/gp/product/B01M0ZU5BN/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=team512-20&creative=9325&linkCode=as2&creativeASIN=B01M0ZU5BN&linkId=2bd17f783a51f932223e70456bf1e86a

[@keithwatson3893]

Looks great

[@Team512]

Thanks!

[@themob100]

Hey I like you video. Can this kit go on a 2017 stingray convertible?

[@Team512]

Yes! You can find it here: five12garage.com/collections/c7-corvette-extreme-online-store/products/eos-z06-front-splitter-c7-corvette-all-models

[@themob100]

Ok thx bro!!!

[@jonathanmurray4942]

Quick question.. did you align the stripe tape with the very bottom edge of the side skirts and front splitter, or did you try and center it on each of the parts throughout?

[@Team512]

Good question. On the side skirts I placed the tape almost at the bottoms edge. The splitter, I just eye-balled. It gets thinner towards the center so it’s difficult to line it up with the bottom edge.

[@jonathanmurray4942]

Team 512 thank you! It really does make the car standout. Hope to see more great stuff for the future!

[@Team512]

Thanks for the kind words! Are you considering putting them on your car?

[@jonathanmurray4942]

Team 512 yes I am! Wanted another opinion before proceeding! “Measure twice cut once”

[@Team512]

Glad I could help. I like this mod because it’s low commitment.

[@Retlife49]

Where did you get the red striping on the splitter?

[@Team512]

Amazon. 1/4”’red pinstripe tape.

[@Retlife49]

@@Team512 thanks you

[@ericplatke-yf7co]

Where did you get the pinstripe tape from?

[@LayneSteighlee]

did you also pinstripe your wheels? if so, what size is the pinstripe? also 1/4 inch? thank you!

[@BJnCars]

Does it stay on at high speeds?

[@artvogel3440]

Who made the stage 3 front spitter?

[@seanperry4239]

Brought mine last week expecting it I the mail.soon. Do I'm assuming its un painted. (Z06 Stage 3 Style ABS Plastic Primer Black Front Bumper Lip Splitter with Painted Carbon Flash Side Extension Winglets). Is it glosed or unpainted?

[@Team512]

From your description, it sounds like the unpainted version. I would reach out to them. The side winglets are painted in carbon flash tho.

[@randolphmcmillian6297]

Wheels u get the red tape and what side it

[@edmaguire1012]

Cool! But, watch out for those parking curbs!

[@Team512]

And groundhogs!

[@Team512]

And groundhogs!

[@Team512]

And groundhogs!

[@SilvernFit]

Love it!!!!!

[@CLCUADRA505]

What’s the part number??

[@515mustang8]

Looks awesome 😎🔥 what floor do you have in your garage and what car lift do you have? Thanks keep up the great videos

[@Team512]

Thanks! It's a Swisstrax floor and a MaxJax M6 lift. More fun content on the way! I appreciate the support. Let me know if you have any content suggestions or ways to improve my videos.

[@stingk5295]

Awesome

[@tommymak8885]

I bought my GS with stage 2 front winglets but want to upgrade to the stage 3. Did they supply you with 3 longer screws for each inner side fender?

[@Team512]

I reused the stock screws on each side. EOS did not provide them, but they were not needed.

[@MrLsmiles]

So what he fails to tell you all that I just found out today.....if you have a GS or Z06....the screws that it comes with will not work. Also the “rivets” I don’t believe are rivets they actually look more like a dry wall anchor but made of metal. So you will need to go get bigger bolts to replace the rivets or whatever they are....hopefully I can get mine on today

[@Team512]

Interesting. The provided fasteners worked just fine for my install. Did you contact EOS?

[@MrLsmiles]

Team 512 so I got mine attached. The old one did use rivets (not a standard rivet) it reassembles more of a dry wall anchor but none the less a rivet. The EOS came with self tapping screws which would work if you had a base Vette that has never had a splitter. The holes where the original screws held the old splitter did line up, but only have the rivet holes lined up and I had to drill them wider so a rivet could actually fit through

[@Team512]

@@MrLsmiles Got it! Did you add the stage 3 winglets?

[@MrLsmiles]

Team 512 No I did not. I love the look from the front but the side profile not so much. They just aren’t my thing. I was able to make it work none the less, but you kinda get what you pay for...so I’m not to upset by it. I hope others have better experiences

[@Team512]

MrLsmiles I consider front splitters a consumable item, much like tires and brakes. So I’m hesitant to spend big bucks on one. So I’m willing to trade off quality for price.

[@edmaguire1012]

Can I drive up and use your lift?

[@Team512]

Background check?😎

[@YingYangStang]

Like everything but the goofy red tape - After I get mine - I will take boxes put in Explorer, get wife to drive Explorer, get in Z06, drive to body shop drop off - done...!!!

[@Team512]

IM GRAYZ Yeah the tape’s not for everyone. What color Z06 do you have? Thanks for watching👍

[@YingYangStang]

Team 512 2019 Shadow Gray just got it canned the C8 for now to much DRAMA

[@Team512]

@@YingYangStang Awesome! Huge fan of Shadow Gray. Was my first choice in color before I saw the Black/Red GS. Did you get it before the GM strike? Or did you have to wait for them to get back to work? A good friend just got his Z06 after waiting quite a few months.

[@lacydo]

It's too low, it scrapes the road and will crack easily

[@عقيلعقيل-ق3ع]

💜💜😍💜💜

[@V-CarChannel]

Look good but they brake to easy

[@Solid_Snack]

Slowing down the car i see

[@StreetProduction303]

Ground hogs 🤣😂🤣

[@Team512]

I called out my buddy A2Rides 'cause a groundhog destroyed his splitter on his Z06! 😂

[@stevenrich1819]

You talk way too much! Just do a step by step-eliminate the fill which no one wants to hear. Show the installation when finished then rate the product.

[@Team512]

Thanks for the feedback. Checkout some of my more recent videos for more of a step-by-step style.