I have just bought this router from Amazon France. I am 78 years old and want to use it on some of my projects that are taking place this year. This was a "nice" video.
@Cornflakes746 ай бұрын
Ty for review, I'm an italian carpenter who live in Ireland and your video is usefull form me to imprve my english and for woodworking. Enjoy.
@LadyBovine4 жыл бұрын
Double nice at 3:04. Nice review. I have the same one and like it a lot. Btw, imo there's no real benefit to running the flat against your straight edge. If anything it's less controllable than using the round parts (which are always the same distance from the bit so it doesn't matter if you rotate the router.)
@TheSwedishMaker4 жыл бұрын
Thanks for the tip!
@leader133grgr2 жыл бұрын
i see it in your eyes , you are a good man and honest.Keep up the good reviews thank you and greetings from Greece
@redpsycho902 жыл бұрын
I was wondering to buy this nice router from the nice people at amazon. But I wasn’t sure this was the nicest choice for me. Thank you for making such a nice movie so I can buy this with confidence and build (hopefully) nice projects. Have a nice day
@Art3miz4 жыл бұрын
Thank you for a nice introduction! I think I'll go with this one as well. I've been considering many different routers for my first one and this seems to be a sensible choice when it comes to basic functions, quality and price.
@PuterExpertCustomPrinting4 жыл бұрын
nice review i just bought one its really nice to use and was a nice price.im a beginner so im looking to do some nice routing.thanks for a really nice review it was nice and helpful.thank you you explained nicely
@TheSwedishMaker4 жыл бұрын
Thanks a lot! Yeah! I like it more the more I use it
@elecacademy28294 жыл бұрын
First Day I bought this router I broke the locking device. Have to admit it was my fault. when I got it fixed I tried to learn how to use it then I found out it was a great machine to use and easy to learn if you go slow . I found your video very helpfull and almost covers everything on the machine. Thank you.
@LadyBovine4 жыл бұрын
How did you manage to break it?
@Kwahntum2 жыл бұрын
Great video and helpful review. Music was pretty relaxing also 😊. Think I’m just about ready to pull the trigger on getting this router. Any chance have you tried turning this into a router table?
@Bernardsam644 жыл бұрын
Very helpful video. I got the little brother POF 1200 AE, it's my first one too, a fabulous tool !
@Phatzoot Жыл бұрын
I was going to get the 1200 from screwfix but it says 8mm shank and they dont even sell 8mm bits its ridiculous im gonna get this one instead
@stitchgames6606 Жыл бұрын
I'm used to larger, corded routers kzbin.infoUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.
@ryantaylor67023 жыл бұрын
Good reviews, honest and to the point, keep it up. I am also looking at getting my first router, thanks for the advice.
@mohamedalmasry75772 жыл бұрын
Codus to the first time reviewer / youtuber .. great job ! and best of luck !
@TheSwedishMaker2 жыл бұрын
Thanks!
@tommyaanonli-larsen8343 жыл бұрын
Bra video. Jag är jättesugen på att köpa denna och göra skärbrädor och och annat kul. Vad rekommenderar du för frässtål till denna? Gärna nåt som är nåt slags all around paket.
@richardharrold87774 жыл бұрын
Tack! This is exactly what I was hoping for. A straightforward and honest assessment of a power tool I'm considering investing in. I like your style and I like the open and honest approach. Look forward to seeing more from you in the future. The "Nice Count" was an amusing touch too - although I think you missed one! ;-)
@TheSwedishMaker4 жыл бұрын
Richard Harrold thanks alot! I appreciate it
@waynedeklerk9563 жыл бұрын
Nice review! Love the background music, please share details 👌
@waynedeklerk9563 жыл бұрын
After your review i went ahead and bought myself one, waiting for it to be delivered👊
@ellassrbija4 жыл бұрын
Thank you for this video. It is very helpful for me, because I intend to buy this router.
@TheSwedishMaker4 жыл бұрын
Thanks!
@Konzertheld4 жыл бұрын
Nice length, less than six minutes, several nice points mentioned so I know what this machine has that others might not have, propably will buy because of the nice self-locking ... whatever that is called again. Thanks!
@TheSwedishMaker4 жыл бұрын
Thanks!
@javax002 жыл бұрын
At 1:55 you talk about the light. The led does not get the electricity from the 220V. There is a small printed circuit board galvanically not connected to anything. The rotating magnetic field of the motor induces eletricity enough to lighten up the leds. Because of that it can shine only when the motor rotates. To have a light that can switch on when the motor is not rotating would need wire to the led from the top, more complex circuitry costing more money and also being more complex means less reliable.
@mak43748 ай бұрын
Here in the US I have the pro version, which I use the fixed base for my router table and the plunge for regular routing. But in my house in Greece where I started spending the summers, and I am trying to set up a shop, the pro version is three times the price. In the US sometimes they go for as low as $160 around Christmas, but in Greece they are over 600 EU - the reason why I bought a bunch of the 18v and 12v in the US and sent them to Greece, but Bosch still doesn't make an 18v full power one, like Milwaukee! They make the 12 inch miter glide miter saw (I am sending one this summer) but not a router, yet! So, until they do, I would like to know, can you install this router under a router table? And if so, can you use the micro adjustment as a "lift" adjustment? I have only seen the Makita as relative inexpensive, but they are the small ones, so until Bosch makes their pro cheaper or makes them in 18v, I need to do some table routing this summer. Oh, I forgot, I am also sending the Bosch route table to Greece, they don't seem to have them there - what's with Bosch International?!? But if I can't install this one, it will probably be cheaper to send the pro, along with a 4000 watt voltage converter. Do you see a problem with that? Will it mess up the motor? Thank you, and keep up the good work. I told all my woodwork friends here about you and they are all watching you now.
@vladimirgasic96423 жыл бұрын
Hey mate! Great video! I just got mine a month ago, I am using it to cut some circles. Good router, altough the micro adjustment is hard to turn, also when I press the knob for lowering the bit it doesnt go that smooth, it also goes really hard, I need to use a lot of pressure to lower it before locking it and start working with it. Have you had the same problem or thats just the way that router works? Thanks!
@TheSwedishMaker3 жыл бұрын
Hey man! Thanks! Now I actually haven't had that issue with it, but I haven't really used the micro adjustment that much either.
@nikolayratahin4097 Жыл бұрын
Я также мучился. Но потом разобрал фрезер и снял направляющие,которые затем отшлифовал и отполировал на ток. станке. Причём направляющяя-трубка изначально была смята.После сборки фрезер легко опускается.
@andre1987eph2 жыл бұрын
I have the 1617. The POF 1400 looks professional to me.
@zacguyot Жыл бұрын
Hi Swedish maker, thank you for this owesome description. Do you know how to set this machine to work with a 55mm depth? I just was able to set it to reach 20mm. thx
@GentlemanH4 жыл бұрын
This exact model is my first router too and I am quite happy with it. At 5:54 - how do you know that the maximum depth is 55mm? Thank you for the tip about the thumb release lever - I did not know that you can push this lever back and it has a brake lock function! Best wishes from Cape Town, South Africa.
@TheSwedishMaker4 жыл бұрын
Ah cool! The maximum cutting depth is the one stated by Bosch as maximum cutting depth. Thanks!
@Rsand-fy8cp4 жыл бұрын
Great review. Do you need an extra long cutter if you want to go up to that 55mm? Or can you achieve that with a standard cutter?
@TheSwedishMaker4 жыл бұрын
Yeah it is the capacity of the router, but in order to go that deep you would need a cutter that can go as deep as well.
@danielmususa8869 ай бұрын
Thank you. This is also my first router and lm strugglingbto fit in any bits so l can do some routing. I have 6 and 8 inch bits but they aren't fitting/lm not fitting them properly
@miketan3734 жыл бұрын
With setting in your bit, you were not using the red button, why is that? Can you tell a little more about which bits are possible for this machine and how you can recognize which ones to buy in the shop (too many to choose from), Thanks for your video, it helps me in the process of buying the same one too.
@TheSwedishMaker4 жыл бұрын
Hi! Yeah I kind of forgot to mention the bit sizes but it comes with 6 and 8 mm bit holders and also one for 1/4". I think I might have made a cut in the video before I had tightened the bit so me holding the red button is simply cut out, but when tightening it really hard it must be held down. Thanks for the support!
@javax002 жыл бұрын
You need to tighten the level locking when the router is upside down in the router table. (3:04) Most home made tables have a lift, and keep the level lock released with some zip tie or something else. I do not use a lifting mechanism. I manually release the lock, push the router up, fix the lock and then use the fine tuning to set the precise height. In this case the default position of the level lock does not hold the router in place, locking is not strong enough.
@turbojay16163 жыл бұрын
I got mine today, gone test it tommorow. Also my first
@STILLDecibel3 жыл бұрын
Thank you very much how do your work the side to smooth the surface instead of the top? At what level the bits must align to work the side of a wood board?
@jakubkolesar43303 жыл бұрын
Thanks for your reviews, it is helping a lot! Subscribed.
@TheSwedishMaker3 жыл бұрын
Thanks a lot!
@MrMaltavius3 жыл бұрын
Jag har också en sån här, använde den första gången idag. Det tråkiga med den är att instruktionerna är tafatta och förutsätter att man använt detta förut. T.ex. såg jag ingenting om att man fick 3 olika spännhylsor (som dessutom är omärkta).
@AlexandrosSpyropoulos4 жыл бұрын
Great review! I'd like to ask if you worked with it on plywood or done any of the following tasks with it and what was your opinion. I'm a beginner myself and I'm on the dilemma between getting this or a blue one. Cable routing, about 1/4" deep. Cutting 1" holes for chunky pegboards 1" diameter dowel cutting for pegs
@TheSwedishMaker4 жыл бұрын
Hi! And thanks! I am pretty sure it can handle all of thoose things easily, but I cant swear on it since I haven't tried it myself.
@astronemir2 жыл бұрын
What do you say in comparison to the cheap knockoffs (biltema/jula etc.) they seem to have copied this router? Or does this have features those don’t? Also, does this router have a pre-set depth stop or can you only lock the depth with that manual adjustment auto lever? Very confused
@TheSwedishMaker2 жыл бұрын
I dint think they are comparable. the output wattage differs a bit and they dint look the same. But I havent tried them. The price difference isnt that big anyways. It has a pre set height adjustment :) thanks for watching
@bennylloyd-willner96673 жыл бұрын
Nice video, can you make (or have you already and I haven't found it😁) make a follow-up video on how it holds up, more than a year later? I subbed your channel, I do like nice and calm reviews and a fellow Svensk också gör ju inte saken sämre 😁👌
@lorencing4 жыл бұрын
Nice demo but a bit more technical use and maybe a comparison would not hurt.
@richardhardaker45863 жыл бұрын
Thanks for this, very clear and helpful.
@ThatOneOddGuy3 жыл бұрын
Whic is better this one or the 1200W professional one
@milosgrujic91188 ай бұрын
Is there an option to set it up on a table as well?
@maxnatrit49464 жыл бұрын
Только сейчас собираюсь купить такой. Спасибо за обзор! 💪
@eltoroxerex4014 жыл бұрын
How much the price please i wan to buy that..
@EclipseBox-he1qp3 ай бұрын
plunge height keeps sticking and won't adjust/plunge smoothly. Second router out of the box doing the same
@raunefare3 жыл бұрын
I have this. And one half the prize. And the cheap one is better xD I don't know if mine is a bad one. But if you try to take a bigger pass. You can hear the engine rubbing and making sparks and making and uneven cut. I have a cmt 2400w router to that's really good. light years better than both. But it 3 time the prize 😄
@Mail2elr4 жыл бұрын
Thanks for the review. I'm currently considering the same.
@TheSwedishMaker4 жыл бұрын
Hope you enjoy it!
@pg86058 ай бұрын
It has same price as GOF 130 so I dont know if this is better
@DailyFrankPeter3 жыл бұрын
You missed one 'nice' after 3:05... but overall, good counting! Oh yeah, and nice review!
@TheSwedishMaker3 жыл бұрын
Thanks :)
@ahmadhussen18503 күн бұрын
It's 1/4 or 1/2 ?
@katerinabitrakovska27372 жыл бұрын
Can somebody explain me, how to use the fine adjustment. When I use that bottom, nothing is going on.
@kerrymartin98194 жыл бұрын
Keep doing reviews! Wou)d definitely love to see some tutorial videos, like what you did with the router, but more indepth, and with another nice count!
@TheSwedishMaker4 жыл бұрын
I will do that! Thanks :)
@kerrymartin98194 жыл бұрын
Could you do a vid on how you set the plunge depths too pls 😁
@alexpereira6653 жыл бұрын
Thanks for the review.
@stuartscott59312 жыл бұрын
I bought one of these and tried it for the first time today. It sticks and needs a good deal of effort to push it down. Maybe it needs lubricating. I'm disappointed with it.
@kathrynnewton87212 жыл бұрын
Thank you! Ha! Nice!
@soofihasan4 жыл бұрын
Thanks. A very good review
@ChristopherClaudioSkierka3 жыл бұрын
hi there, have you used the dust port if so how well does it work? , ps how far down on a depth per pass do you do (max)?
@tomscrapwood78833 жыл бұрын
hello! the dust port is very efficient, work area is completely dust free
@edLambshanks4 жыл бұрын
very helpful review - thanks 👍
@latestnod42454 жыл бұрын
Hello, I'm looking for router to make guitar, can you please suggest, which one is good. Palm router or plunge based router? or which model one you would recommend.
@TheSwedishMaker4 жыл бұрын
I have never made a guitar so I am not sure what type of work you will be doing.
@An.Individual2 жыл бұрын
3:52 fits guide upside down. Nuff said.
@alexw2604 Жыл бұрын
Is there much difference between 1200W model and 1400W?
@didndido3638 Жыл бұрын
If 200W is much , then is a difference.
@JoaoPedroSobral4 жыл бұрын
@swedish maker great review. I have the same myself iit is a fine router. I living in Sweden, Upplands Väsby. I struggle to find good quality plywood for woodworking. Do you care to share where we can we find it? Hornbach "björk plywood" you need to order minimum 5 sheets :S.
@TheSwedishMaker4 жыл бұрын
Hi! Thanks! I usually order my plywood from calexicowood.se - and they sell whatever amount you need but you have to pay for the freight which is usually around 500 sek.
@epfeifer73644 жыл бұрын
I think you missed a nice count at 3:07-3:08...😉
@TheSwedishMaker4 жыл бұрын
Yeah I realised that after posting :)
@epfeifer73644 жыл бұрын
All good. Just checking😄👍🏻 Thanks for the review. Router is next on my buy checklist.
@thepizzafella90404 жыл бұрын
How to change the spindle from 6 to 8mm?
@TheSwedishMaker4 жыл бұрын
There arr three bolts that are screwed on and off the drill head to change size
@olafdebruijn99614 жыл бұрын
Nice
@Dennisknutsson4 жыл бұрын
Hej. Jag undrar vad det är för mått på skruvarna som håller fast dammsugaradaptern? Är det m4?
@TheSwedishMaker4 жыл бұрын
Jag svarade på fel kommentar såg jag. Får återkomma med svar på denna, jag vet faktiskt inte :)
@TheSwedishMaker4 жыл бұрын
Dennis Knutsson M3 var det. 2st
@Dennisknutsson4 жыл бұрын
@@TheSwedishMaker Tack så mycket.
@ChristopherClaudioSkierka4 жыл бұрын
ps some good info in your video , thanks
@ChristopherClaudioSkierka4 жыл бұрын
hey, just to kinda of pre warn you ! In the initial comments, you said lets 'dive into it' , firstly I would not want to and I strongly recommend you do not sir , depending on what router bit is in at the time it will more than likely cause you some serious harm and possible death. So please save the dive for the sea or swimming pool only if you can swim though, and for God sake read the manual to learn how to use this tool in a very safe manner. Hope you enjoy its use. :)))))
@romurphy96064 жыл бұрын
Nice.... Seriously, nice review though. Thanks
@TheSwedishMaker4 жыл бұрын
thanks!
@kathrynnewton87212 жыл бұрын
Actually, I think you missed one!
@ehsanmorav4 жыл бұрын
good news: you just got your 100th LIKE
@TheSwedishMaker4 жыл бұрын
Ehsan Moravveji Thanks a lot! :)
@DonMatze0074 жыл бұрын
I assume... the machine is nice
@TheSwedishMaker4 жыл бұрын
Haha yes, yes it is very nice indeed :)
@Coffeesurgeons Жыл бұрын
If you can afford fancy tools like this you dont need my support on patreon