In this final video I fit the plinths and the cooked hood apart from the chimney as the electrical connection has yet to be done.
Пікірлер: 103
@kelvinwingfield34232 ай бұрын
Great job mate looks wicked
@thetallcarpenter2 ай бұрын
Cheers Kelvin🤩Thanks for watching 😎
@darrenmaxwell31087 ай бұрын
Top level carpenter one of the best in the uk along with robin clevitt and Dan.
@thetallcarpenter7 ай бұрын
Hi Darren🖐That's a very generous comment bud🤗Thanks for watching😎Cheers Del
@julietphillips1991 Жыл бұрын
Silly me, I just love how you, freehand, cut a lovely circle in the ceiling w/out a holesaw!
@thetallcarpenter Жыл бұрын
Hi Juliet🖐A holesaw is great and fast, but does throw dust everywhere, which isn't the best in a, nearly finished, kitchen👍Thanks for your comment 😎 Cheers Del
@m0aze611 Жыл бұрын
He’s a true pro, knows what to use and when..
@johnthresher259 Жыл бұрын
Great stuff as always. I love the fact that you mentioned Andy The Gosforth Handyman. I follow his channel also (along with Proper DIY, Rag 'n' Bone Brown, Charlie DIYte and Robin Clevett ) It's good to see proper craftsmen like yourself giving a shout out to each other.
@thetallcarpenter Жыл бұрын
Hi John🖐Great comment bud, and Andy gave my channel a plug on his kitchen video which mine a nice little boost👊It's a funny old world making and uploading KZbin videos, and, as you say, is pretty cool to think that there is a bit of community that makes you feel not so alone from a creators perspective🤩Cheers Del
@johnthresher259 Жыл бұрын
@@thetallcarpenter You're right, a community of like minded craftspeople. I've learnt a lot. I also follow Gid Joiner but he seems to be a bit quiet at the moment.
@Dazza19746 Жыл бұрын
@@johnthresher259 Gary Thompson joinery is good too, Gary doesn’t seem too interested in KZbin currently either, I’m guessing it’s a hell of a lot of work for not much reward unless you’re getting the numbers watching. Likely takes twice as long to do job too, if you’re videoing it! Good channel but nice , funny bloke
@SteveAndAlexBuild Жыл бұрын
Beautiful clean bright kitchen . Great attention to detail as always 👌🏼🧱👍🏼
@thetallcarpenter Жыл бұрын
It was a pretty straightforward one Steve👊Thanks for your comment bud😎Cheers Del
@SteveAndAlexBuild Жыл бұрын
@@thetallcarpenter 🤜🏽🤛🏽🧱👍🏽
@peterbest2434 Жыл бұрын
Great video again. Sparky put the power for our rangehood in the wrong location (only off about 300mm - one of many mistakes). The kitchen fitters did not want to come back so they fed the rangehood power lead into the ceiling. When the sparky came back to fix their mistakes (fortunately a differ person) they just moved the socket in the ceiling & connected rangehood. Then plaster had to come back to patch the wall. Hard to get good trades people in Australia. Great to see there are still trades people like you that take pride in their work.
@thetallcarpenter Жыл бұрын
Hi Peter🖐I've seen the power outlet for the extractor hood outside where the chimney goes quite a few times, and it's just poor/lazy planning, and as you mention in your comment, causes additional problems for others to sort out😵💫Thanks for your comment and thanks for watching from Australia 🇦🇺 😀 Cheers Del
@chaproo12345 Жыл бұрын
Brilliant!
@thetallcarpenter Жыл бұрын
Cheers Tony👊
@amazing451 Жыл бұрын
Nice looking kitchen there Del and nice series. Look forward to seeing you soon. 👍👍
@thetallcarpenter Жыл бұрын
It's been a little cutie of a job Kevin😁and there's plenty more of this kind of thing coming soon👍Thanks, as always😎
@neil-mv3it Жыл бұрын
great series of videos
@thetallcarpenter Жыл бұрын
Appreciate you watching Neil🤗Cheers Del
@johnwaby4321 Жыл бұрын
Brilliant job 👍👍👍
@thetallcarpenter Жыл бұрын
Thanks for watching John😎Cheers Del
@wardy2002 Жыл бұрын
Excellent work. Thanks for your help with the Kickboard problem. Much appreciated
@thetallcarpenter Жыл бұрын
My pleasure Wardy👍Cheers Del
@paulcloona9331 Жыл бұрын
Nice video Del👌. I've seen fitters using a 18volt impact to fit full kitchen. Crazy stuff. See what you did hand tighten dishwasher all drawer brackets. That's what I do aswell, I have a fairly old cordless makita 18v drill, it's weak to drill stuff, but perfect for light work. Keep the brushless 18v for other stuff.
@thetallcarpenter Жыл бұрын
You're spot on Paul, and these powerful new impact drivers lack the control of the smaller, drill drivers, and can easily strip out timber when screws are overtightened😬 I guess it's a case of using the right tool for the job👍Cheers Del
@paulcloona9331 Жыл бұрын
@@thetallcarpenter spot on Del 👍🇮🇪
@DMC888 Жыл бұрын
I use a Bosch Ixo. The torque is so low you can hold it loosely to attenuate it.
@paddy120 Жыл бұрын
Quality work as usual 👍love your kitchen videos
@thetallcarpenter Жыл бұрын
Appreciate your comment Paddy🤗and thanks for watching😎Cheers
@suedouglas5455 Жыл бұрын
Strange to have such a small dishwasher in a large kitchen! In an odd place as well! You did a wonderful job though!
@thetallcarpenter Жыл бұрын
Hi Sue🖐To be honest, this particular customer didn't want a dishwasher at all🤯Thanks for watching and your comment 😎 Cheers Del
@andrewbradbury8527 Жыл бұрын
Excellent work... you're multitalented!😃
@thetallcarpenter Жыл бұрын
It's all part of the job description Andrew😁Thanks for watching 😎 Cheers
@michaelplays2449 Жыл бұрын
Great video Del !!! Thanks
@thetallcarpenter Жыл бұрын
Thanks for watching Michael🤗Cheers Del
@robertmorris5214 Жыл бұрын
Excellent job Del
@thetallcarpenter Жыл бұрын
Cheers Robert👊Thanks for watching 😎
@johnspencer1145 Жыл бұрын
Thanks del great job as always looking forward to your next video 👍🏻
@thetallcarpenter Жыл бұрын
That's great John, and I have lots more videos to come👍Thanks for watching 😎 Cheers Del
@Trainboyjackvr Жыл бұрын
For holes like that I keep a box of coloured wax’s in the van
@thetallcarpenter Жыл бұрын
They can be a life saver Paul, and I actually need to expand my colour range with the ones I have🤔Thanks for your comment and for watching😎Cheers Del
@garvielloken3929 Жыл бұрын
Nooice!
@thetallcarpenter Жыл бұрын
🫡🤩😎
@daveg6948 Жыл бұрын
Excellent work as usual Del. Looking forward to the next one. Can't let the Nagging Machine aka The Wife watch or she would be wanting that same kitchen. 🤭Take care..
@thetallcarpenter Жыл бұрын
Yeah Dave, a man should NEVER reveal what he watches on the Internet with his other half😲It's just safer all round😆Great comment 👍 Cheers Del
@johnmorrissey1675 Жыл бұрын
Excellent 😁Del , fitted a hob in my own kitchen about 6 months ago, Bosch ,had to go back and fit a heat proof panel under it to stop the heat traveling down into the drawer , never had to do that before, service guy said it's standard practice now, spoke to a few other lads and the never heard that , last time I'll buy a Bosch hob 👎 , 👋☘️🇮🇪👋
@thetallcarpenter Жыл бұрын
I must admit John, its the first I've heard of this issue🤔but sounds like it might be a 'thing' with Bosch hobs😬Thanks for the info fella😎Cheers Del
@johnmorrissey1675 Жыл бұрын
Forgot to say we never had any problem like this with the old one 🤷🏼♂️
@thetallcarpenter Жыл бұрын
@@johnmorrissey1675 🤔😵💫
@ironpirate8 Жыл бұрын
Did you put it in with the rings facing up? 😁
@johnmorrissey1675 Жыл бұрын
@@ironpirate8 😀 you could fry a egg in the cutlery drawer 🤔☘️
@gerardfarrell3135 Жыл бұрын
Great stuff Del, always shy away from kitchen work wouldn't have the patience for it, however watching you at that is kind of therapeutic. I'd be interested to see the kitchen in the 12 hip house 🏠. Cheerio
@thetallcarpenter Жыл бұрын
Hi Gerard🖐Like all things, I guess, it comes down to confidence and repetition🤓I probably will show the 12 hip roof house kitchen as it's quite a nice one🤩Cheers Del
@jofasable Жыл бұрын
Watching and learning 🙋♂️
@thetallcarpenter Жыл бұрын
Cheers Joe👍and thanks for watching 😎 Cheers Del
@viankalobosvalenzuela7456 Жыл бұрын
Excelente trabajo felicidades 👊 💪 👌🏻
@thetallcarpenter Жыл бұрын
Thanks for watching Vianka🤩
@barryford7135 Жыл бұрын
Nice one Del. 👍
@thetallcarpenter Жыл бұрын
Thanks Barry👊
@arthuranderson7741 Жыл бұрын
Neat kitchen...but as you said the design/layout could have been better...do like those handle less kitchen thou. look forward to your next task.
@thetallcarpenter Жыл бұрын
I agree Arthur🤔But the customer gets what the customer wants😶Thanks for watching and more videos coming soon👍Cheers Del
@Brown969 Жыл бұрын
Does the extractor vent into the loft? Thanks for sharing your workmanship.
@thetallcarpenter Жыл бұрын
Hi Nathan🖐The extractor was vented through the loft and out of the end cable wall👊Thanks for watching 😎 Cheers Del
@dilligaf2386 Жыл бұрын
Fitting kitchens looks like it can be a pain sometimes/ dishwasher
@thetallcarpenter Жыл бұрын
Hi there🖐Like most things,I guess, some go well/smoothly, and some don't😵💫Thanks for watching 😎 Cheers Del
@tonyh47375 ай бұрын
Retired chippy here, very nice job if I may say so, but where does the extractor pipe terminate?
@thetallcarpenter4 ай бұрын
Hi Tony🖐Great to have you watching🤩This goes up into the roof void and then out the cable wall👍Cheers Del
@tonyh47374 ай бұрын
@@thetallcarpenter 👌
@Nov3lla00 Жыл бұрын
Currently doing a carpentry apprenticeship, your videos have been a great resource. Thank you! Also have to ask, how tall are you? :)
@thetallcarpenter Жыл бұрын
Hi Lee🖐Great to hear you are doing a carpentry apprenticeship, and that my videos are helping🤩I'm just shy of 6'6" tall bud😎Cheers Del
@Dazza19746 Жыл бұрын
You didn’t try an make the undermount sink removable then Del, for ‘maintenance’ 😜😂
@thetallcarpenter Жыл бұрын
Not on this one OSC😵😆😎
@Dazza19746 Жыл бұрын
@@thetallcarpenter can’t do it every kitchen! Make life to easy for the sink engineers ( maintenance dept.)
@paulyoull54723 ай бұрын
Hi Del, a great kitchen fit mate!!! Have you any experience with benchmarx kitchens /customer service. I’ve been asked by a customer to possibly fit one, but never had any experience with them. Cheers Paul
@thetallcarpenter3 ай бұрын
Hi Paul🖐hope you are well🤞I have fitted a Benchmark kitchen before, and don't remember there being any problems when a couple of bits needed changing/replacing😎Cheers
@paulyoull54723 ай бұрын
@@thetallcarpenter thanks Del. Keep the posts coming mate. I love watching them. You are an ambassador to our trade.
@thetallcarpenter3 ай бұрын
@@paulyoull5472 You're too kind Paul🤗
@akfisher7138 Жыл бұрын
what is the gap between plinth and bottom cabinet? I assume as you can not see gap, and you need some clearance to get plinth in...
@thetallcarpenter Жыл бұрын
Hi there🖐I try to keep the gap below 5mm 👍Cheers Del
@davidguest6004 Жыл бұрын
Del, who supplies your kitchens?? Just like the door on the DW. Much easier.. I use howdens mainly.
@thetallcarpenter Жыл бұрын
Hi David🖐They are put together from different suppliers/manufacturers by a company called LifeLong Kitchens in Cambs 👍Cheers Del
@davidguest6004 Жыл бұрын
@@thetallcarpenter ahhh ok. Will check if they deliver to the North or have branches here. Cheers Del
@thetallcarpenter Жыл бұрын
@@davidguest6004 It's my mates company and he only really supplies kitchens locally👍
@davidguest6004 Жыл бұрын
@@thetallcarpenter ahhh gotcha. I'm down your way in April.. we should meet up. In the near time, keep dancing 🕺 lol
@marknadin770 Жыл бұрын
Del great vid what's the orange drill make 👍👍🍺🍺
@marknadin770 Жыл бұрын
ignore typical you said what it was people won't be happy calling it orange🤣🤣🤣🤣
@thetallcarpenter Жыл бұрын
Those drills don't come out often Mark🤔but they are still a bit faded🤩Thanks for watching 😎 Cheers Del
@thetallcarpenter Жыл бұрын
😵💫🤩
@SuperWayneyb Жыл бұрын
🤘😎🤘
@thetallcarpenter Жыл бұрын
First comment Wayne🥳Thanks for watching bud
@ice4142 Жыл бұрын
Do you ever put plastic sealing strips on the bottom of the plinths? I am having a devil of a job fitting some without damaging the paint finish on the plinth so any tips would be appreciated.
@thetallcarpenter Жыл бұрын
Hi there🖐When fitting this strip, start a couple of inches one end, and keeping it pushed down with one hand, lift the the rest of the trim up and 'bend' it whilst thumbing it onto the edge as you go. You'll notice that the channel widens slightly as is bent making it easy to get on👊I hope this makes sense🤞Cheers Del
@karl212 Жыл бұрын
Del stop messing about get yourself a multi tool saves all the head ach of a pad saw .......how you getting on with the glass sucker 🤔👍
@thetallcarpenter Жыл бұрын
Hi Karl🖐I never thought of using a multitool for cutting the ceiling plasterboard🤔I haven't got a sucker yet, but it won't be long👊Cheers Del
@karl212 Жыл бұрын
@@thetallcarpenter nice one del ...ATB 👍
@DMC888 Жыл бұрын
@@thetallcarpenter a multi tool with a carbide tipped blade goes through it like butter. Better still is one of those specialised dry wall cutters, they make far less mess.
@thetallcarpenter Жыл бұрын
@@DMC888 I guess I'm still a bit old school, and tend to forget how versatile the multi tool can be🤔Thanks for your comment 😎 Cheers Del
@DMC888 Жыл бұрын
@@thetallcarpenter to be fair, if you can do it that fast by hand it’s hardly worth getting the tool out.
@83maller Жыл бұрын
Subscribed on the recommendation of the @gosforth handyman