How to Make a Mad Max Snake Knot Paracord Bracelet Tutorial

[@TheWeaversofEternity]

WOE Online Paracord Shop ▶ paracordweavers.com/?sca_ref=6422991.Yrw6WNlrgE GET MY FREE EBOOK ▶ www.weaversofeternity.com/freebook

[@odonecoyote8200]

much better video then the other "mad max" style one i watched and made,...just a bit of frustration. thank you for your easy to follow guide

[@nixternal]

Definitely going to give this one a go, I like that style. One thing I have started doing is instead of preshrinking my cord before doing everything, I now shrink after creating whatever it is I am creating. In this case, I would make the bracelet a little large, usually about a 1/2 inch larger than what I would wear, and then when complete, soak it in super hot water, not so much boiling, and then let it air dry over night. It tightens everything up, and in the case where the slack was a little loose, it would be nice and tight in the morning. Thanks for this tutorial, great job!

[@TheWeaversofEternity]

+Rich Johnson Great tip!

[@ms23419]

sounds like a good idea

[@pinkannasofoxy9588]

I can't under over why

[@ramrahvarma8706]

Rich Johnson q

[@GATORSK8TER]

Does this method work with women? Lol

[@Hellwolf501]

this is my first paracord bracelet, and I gotta say you have the best tutorials easy to follow, clear and concise, 8/10 would watch again

[@TheS1dney]

made this as my first bracelet today and it turned out great. thank you your a natural teacher

[@sohilaganta8773]

Sidney Bryman hey! 5 feet would be enough?

[@TheS1dney]

Sohila Ganta Hi it depends on your wrist size. If I remember I used 10ft which gave me plenty of room to practise the knots but cut off loads after.

[@sohilaganta8773]

Sidney Bryman hahaha thankyou soo much. :)

[@Steve-ls3yy]

First time here. Just wanted to make my own rifle sling. Didn't expect to run into Mad Max. Just click about 14 videos for "watch later". And clicked Sub'd too.

[@MrDvlDoc]

I made a Black Mad Max knot bracelet. It looks great. I had to adjust the knot several times. This know will teach you patients.

[@MosesKenobi]

This has become my new favorite bracelet. I've made several over the past few days -- including a Manny-bonded OHSA Orange/Reflective Silver just now.

[@nanoguerreror]

Awesome bracelet! what I did find useful, but it changed the original bracelet a bit to rid the problem of the feed loop loosening due to excessive use was to add a slide knot between the stop knot to it and it worked super on it. It rid the problem of it loosening on you.

[@davidenochs7572]

I wanna say thank you for this. I’ve already completed my first one by your design and it should come in very handy for my bushcraft hobby. Keep up the wonderful videos

[@blackpitch9617]

Simple, classic, cool. It rocks! Thanks a lot 4 ur great and well organized channel *-*

[@EliteHunting1911]

Best paracord videos on the interwebs

[@TheWeaversofEternity]

+EliteHunting1911 :D!!!!!!

[@biomgaming12-gamer93]

I agree this is THE best! Very interesting ideas ! Mad Max braclet is my favorite though **

[@blackicybear620]

I switched completely from knot and loop to the Mad Max style. It's a lot easier to put the bracelets on and off and you can make a bracelet for a friend or family member without measuring. But it is a great video

[@meenakothari4404]

I think that these r the best bands in the world and the most beautiful and cheap.

[@vickibradley3120]

Didn't watch the movie...but love the bracelets. Thanks for the great tutorial!

[@johnbailey2299]

This is very cool. Very nice and simple to put on and off wrist. Your tutorials are always great and I find relaxing. Thanks.

[@MFDBLACKESTHART]

This is great. 8’ was a bit short for me. But it’s a starting place and adding a foot made this perfect with minimal waste

[@fph2060]

Simple but effective

[@abdeldeniro7749]

I made my frist bracelet =D ,Thank your for teaching . Greeting From morocco

[@TheWeaversofEternity]

Awesome! You're very welcome and thanks for watching and commenting.

[@ImJustSmooveLikeDat]

I really like this style bracelet. I can't wait to get home and start making it. I wish I had this color to work with. I think the toughest part is going to bet the knot. But, I'm sure I'll get it before I turn batty! Thanks for the tutorial.

[@eLOVES1911]

Seriously love your videos. I just got done with my very first bracelet. Made it for my husband. 😀 So excited.

[@chadtimothy2249]

I realize this is a couple of years old but still a great video! Some have complained of the zoom depth but you only need to focus on the point you are currently working. Only recommendation is at the beginning with the initial knot, use a small piece of scrap folded in half that you can tighten like crazy and leave to the end. Then when you finish (especially if you don’t have a fid) singe your bracelet ends to the scrap and pull it right through nice and tight!!

[@TheWeaversofEternity]

Hey Chad, thanks for the comment! And yes that's a very good tip about using a small piece of paracord to tighten down the first knot. Thanks for sharing that!

[@cmllluchador4935]

Awesome. Made one and looks very good.

[@Rzut-Oka]

Best snake knot tutorial video thanks!!!

[@marytabler644]

So sharp!

[@MrRyo421]

your video help with my anxiety... I like to watch you make bracelet. thank you.

[@paulinocampos6990]

Mel Hawk m

[@scottsisk1527]

I like it. it was a good simple instructional video

[@KevinDugay]

Just made my first one and it was this design! Thanks!

[@pristinabread]

Thank you very cool. Is there a trick to threading the cord if you don't have that cool knitting needle looking tool?

[@TrendingPendingVideos]

I need help on last part where u pull the top loop to make the bottom 2 loops tighter the top loop gets too big and my knot isnt be enough as the top hole its really big or... Even if i get the right size knot when its on my wrist and the knot starts pulling the hold it gets bigger ?

[@gonzalezgonzalez7027]

love your videos

[@TheWeaversofEternity]

Thanks!

[@luisehrlicher7866]

Nice stuff you produce, I love it!

[@clayballard6400]

I wonder if you could tie paracord around a coin to make a cool sort of key chain. Idk, could be cool. Nice vid! Love this channel.

[@TheWeaversofEternity]

+Clay Ballard You definitely could, but I just haven't figured out a way to do it yet. Thanks for the comment!

[@tomaslukovics3780]

Thank you very much. Nice tutorial.

[@TheWeaversofEternity]

You're welcome! Thanks for commenting!

[@dusanovsenak3827]

Thank you, great video!

[@nimazarei5010]

thank you bro you are excellent !

[@reneesmae1]

Very cool, like these kinds of bracelets w/o the buckle😌 Didn't know you could make these till I was in a Michaels craft store and I was looking for material for my nieces bracelet.

[@jalencarter8537]

Thank you for the video! I just made my first bracelet. It's not perfect but it's a great start

[@TheWeaversofEternity]

Awesome, you're welcome! Glad I could help get you started!

[@landondahle1767]

This was really fun to make and I would do it again. it looks cooler if you do the two single strand diamond knots instead of the one.

[@TheWeaversofEternity]

Ohhh nice, that would look really awesome too. I'll have to try that out for myself! Thanks for sharing!

[@landondahle1767]

Thanks

[@SONofVODKA]

Always great videos thank you!

[@davidusb06]

Merci pour la video qui m'a montré une autre version de bracelet paracorde, bonne soirée , david, france ;)

[@ScallywagsTattoo]

Another great video. Thank you.

[@fabionesteles4838]

Thank you Very much!

[@sadhana942]

really good useful to all

[@simonsrnka9453]

I wat to say thank you for your grate Tutorial its very easy to copy it. And I think this knot and the Fishtail are the lightest for Beginners. Best wishes from Austria! And I hope you take the wright President for the next USA but there are not good Canditats. :-)

[@TheWeaversofEternity]

+Simon Srnka Haha, fortunately I am Canadian. :)

[@madrascoolie]

i like this bracelet

[@mateiros_carijos]

Thank you for teaching us very clearly and patiently . Congratulations on the Channel , your videos are very good! A hug from southern Brazil !

[@fiddlebone7751]

Thanks. This helped a lot.

[@austinhall8684]

it is pretty simple to do i believe most of the people can accomplish of course it takes patients and a little time..

[@El.Atelier.de.Bernardita]

You are genious!!, fantastic!. Greetings from Chile!!, I will do it!

[@ryugo7713]

Did you do it!?

[@PsychoDemonify]

I have been making the standard Solomon knot mad max style. The excess that you adjust to tighten on your wrist, do you let in just hang there, or do you tuck yours in?

[@TheWeaversofEternity]

+PsychoDemonify I just let it dangle there. But I've worn it tucked into the bracelet as well before.

[@PsychoDemonify]

Thanks for the reply. I actually started adjusting mine where it is pretty hard to get on, but once its their it's loose. There's no excess hanging that way.

[@fishingforlife2441]

+The Weavers of Eternity Paracord Tutorials did you like Mad Max??

[@АнастасияКирилова-ш7ы]

Прикольно, папе такой сделаю...) Cool, dad do this.

[@carrottop7859]

was very helpful thank you and i also checked out ur dimond knot video also very helpful thank would love to c more

[@anaarbre]

Very good. Other tutorials are so very hard to understand.

[@olegiatsyshyn5748]

Good job

[@betoborrela]

Nice video mate!! good job!!

[@Maximilian178]

Ah first time I tried it I didn't get the sling tight enough. Found out however that I can pull the stopper knot through on the opposit site to create more friction :D

[@BNHC0]

3:33 for the snake knot repeat

[@nathanpeters2391]

VinnyB0III You sir. You deserve a cookie 🍪

[@paracord-volgmchm3846]

Thanks for the video!!! I did this one.

[@johancakep]

thanks, this is what I'm looking for!

[@franciscoarvizu8434]

Make more with the Mad Max method

[@GodsSignPost777]

I have a question for you. Is it possible to tie this knot with a core to make it a little larger in diameter for such as a dog leash?

[@MrPaulHobby]

I want to get into making paracord items. Arrived here first. Subbed. :)

[@fruitbattery]

Hey! Thanks for this tutorial. :D I bought some paracord a while back and the tutorial that came with it wasn't exactly helpful (illustrations were botched, I think, or I'm just a bit stupid...). I used to do a lot of macramé years ago, but have never attempted this knot before, and only ever used hemp, which of course isn't as useful or sturdy. That being said, I found this easy to pick up, and am pleased with the result. I really like the look of this design, prefer it over the cobra one (mainly because that was what I mainly used to do back in the day), and it feels more flexible on the wrist. :)

[@thawornjohnson7366]

Beautiful

[@jovannifigueroa9548]

I learn something new and I oh it all to you thank you very much for the tutorial

[@raymattison2083]

Did you know the original bracelet was not part of Max's costume, rather a personal item that Hardy wears pretty much all the time because a friend of his in the military made it for him. The more you know🌠 lol either way good tutorial

[@TheWeaversofEternity]

+Ray Mattison I read about that too, so cool!

[@ceriseetcerise3194]

thank you

[@vickysandhu2225]

Nice one

[@cmllluchador4935]

Thanks man. I'l do it.

[@akshidevi69]

Hi there..would you please do a snake knot neck lanyard (with buckles & a bead/hex nut)?

[@FincaElCasquillo]

thank you Tim. I hate wasting cord, how much did you cut off? Actually, I believe it would be kind to show how much is cat (wasted) when you make a bracelet (or any project).

[@bryanpacete8426]

wow... great thanks my friend..!!

[@TheWeaversofEternity]

You're welcome!

[@bagussulistyo1243]

i like it

[@grimreaper7862]

good one

[@the-Nikk]

thanks for the tutorials it is help me a lot. but i seems have a problem. i've doin' knoting last 2 months and this video is my first bracelet. but after a month, knot in my bracelet seems starting to loose (not tight like the first time). i don't know why, can you help me? ow almost forgot, btw i use non nylon paracord... thanks a lot

[@imageblogger2142]

Really appreciate your stuff. Suggestion : why not (no pun) use a doubled piece of 550 scrap to hold the hole open? That way you can keep the hole nice and tight. Thoughts?

[@jboss7820]

Image BLOGGER Amazing idea! Once you're finished with the main knots, use the scrap as a kind of fid if you don't have a real one. Thanks for the idea

[@pedrobaena1264]

thanks i actually did it after a few trys also the las part couldn't done it right

[@SocialContraire]

Very easy to follow instruction! My question is, given i do not have a mans wrist on hand to measure on, how many inches of cord is left when you pull it through the loop before making the end knot?

[@TheWeaversofEternity]

It depends if you want a short cord when pulled through I think the minimum is about 2 inches or so. Any less and it will be really hard to get the bracelet over your hand.

[@SocialContraire]

ty for responding! and ty for teaching me a new skill!

[@ManojChauhan-zq6lu]

nice job

[@CBL138]

Glad I found your channel. You mentioned the total length is 8 feet but did you start your loop right down the middle at 4 feet?

[@TheWeaversofEternity]

+C Lewis Yeah I started at the middle. You can always give yourself a little extra paracord to be sure you have enough.

[@lotstothinkgaming]

Wonderful! I'm guessing if I wanted to add something like hex nuts, I would do it before I make a knot?

[@TheWeaversofEternity]

Thanks Trishana! You could incorporate hex nuts throughout if you wish, just add them as you go and yes, add them before you finish with the knot.

[@lotstothinkgaming]

Thanks for the help! Your channel is awesome

[@fishingforlife2441]

+The Weavers of Eternity Paracord Tutorials it is hard to make it but it is worth it!!

[@myriamrestrepo4688]

Muy agradecida , hermosa pulsera Gracias

[@chrisrodriguez3639]

that is the best thing ever

[@imaginehydreigons5377]

how tight do you pull your snake knots? Is tight or lose better?

[@shivsteelfurniture702]

very good dud

[@Sooper8]

And those who gave the thumbs down, did so for what reason? I just dont get it... Thanks for posting. Thumbs up!

[@bysalla]

in this tutorial you tie each snake not separately, but in your other snake knot tutorials, they are linked.... is there a difference? a reason I would do one method over the other? Thanks!

[@TheWeaversofEternity]

There's not really much of a difference, the linked snake knots is a slightly thicker bracelet. Overall though, they look almost the same.

[@mikewhisky9605]

Really nice manicure!

[@luisalbertopaivatume8753]

Muy buenos vídeos...

[@andurilhospedales784]

I love it

[@conniealford1020]

I recently found your channel!! I love your videos. They are easy to follow and don't waste my time. Good stuff!! Thank you for sharing your art. ✳️💜☯️🙏☮️✌️❇️

[@TheWeaversofEternity]

You're welcome Connie! Glad you found the channel and that you are enjoying the videos!

[@jucaroferopfer4920]

Sencilla pero bonita pulsera, me gusta el cierre especialmente.

[@MohammeBakr-ic3vr1kh8e]

wooow you are amazing

[@TheWeaversofEternity]

+Haly sy Thanks! So are you! :)

[@abdullayachi2648]

My wrist is about 19.5cm so how much paracord do I need like how much it takes in 1cm !!? I'm trying to make my first bracelet and I like this model

[@marcelpignole583]

Thanks a lot man !! very helpful. I just made one in sky blue for my Grandma, who is doing very bad :-( I love the music at the end, could you tell me what it is ?

[@normanmartin8277]

Is she doing ok now?

congratula tons, greta! !!

[@copperstarmetalclan9486]

Thank you!!

[@mangesh13charming]

m not getting this cord in my city..... can i use leather cords?..... kindly suggest me alternative material please....

[@Frentorianid]

+Mangesh Dhere in theory you can use leather, I've used round strings for weaving. But actually any cord will do + you can order this thing on aliexpress, it's like 5$ for 40 meters

[@mangesh13charming]

+Kilo Ton thank you.... and i alrdy ordered it from aliexpress only...... best coincidence....but still thank you again.....

[@claudiogoncalves4298]

What colour is this it looks great

[@TheWeaversofEternity]

This color is tan.