Thank you for the video, I just bought one and never used one before so this was a big help. Thank you . Billy
@tazblink3 жыл бұрын
I appreciate you sharing this cleanup video. I am here to see the X7 in action I am looking at it among others. I have used many airless sprayers in the past and I know you are brand new at this and I mean no disrespect. However you are about half clean here. First mask everything you are going to spray and do it all at once. The spray time is very short compared to prep work. I know they say you can but don't leave paint in your sprayer accept for lunch or a smoke break etc not over night. Use several buckets of clean water and recirculate into them and change buckets over and over Intel it is super clean. Disassemble gun and completely clean it. I also remove the hoses and clean them. Each time you use the sprayer small bits of paint get stuck in the sprayer cracks and crannies and will Harden over time. If you own your sprayer and its not a rental take the time and over clean it and it will always be ready to use after long term storage. The extra time spent cleaning these amazing sprayers is so very worth it. Just my 2 cents. Thanks for sharing your video.
@IknowGodIs9 ай бұрын
Let me tell you that you’ve totally taken the scary out of this for an airless paint sprayer beginner! I bought this airless sprayer, and I’ve been afraid to even learn how to prime it; so, after set up, there, it has sat waiting for this little lady to buck up. After watching your videos, I’m ready to jump right in to painting with it tomorrow morning!
@rjb772 жыл бұрын
I did a lot of reading on airless sprayers as well as a very long list of video's on youtube over the last month or so. I think yours is probably the best one I've looked at, both pat 1 and 2 so thank you for the info and a very well done video.
@robinweiss35344 жыл бұрын
Hi, i just wanted to say thank you for demonstrating the x7. I recently purchased the x5. Once spraying it was complete within minutes. It was the setup, prep, and clean up that had me intimidated. You have been thorough, informative, and well keeping it simple. I'm going to bust it out and give it another shot. Currently fixing up in laws house for selling. Thank you friend your videos have put the fun back into this for me. It is a big deal for me being I had been so stressed. Back to work! Have a great rest of your day!! Robin Renea aka Birdie
@JackwLarson Жыл бұрын
Great video series on the X7, Cliff! Thank you.
@phillamoore157 Жыл бұрын
Watched and commented on the first video. This was excellent, as well....and thank you for the hose "tip". The cleanup was exponentially more complicated than the setup. But, again, after doing it once or twice, hopefully, get's easier. Still worth the purchase. And, I agree that paint masker (of which I have two) is an AMAZING tool. Wish I had discovered those sooner, as well. Thank you for taking the time to share this with us, Cliff. GREAT channel!
@travismcgee1002 жыл бұрын
And another helpful video. Thank you.
@huntz78472 жыл бұрын
Very good information! I appreciate the videos for both the HPLV and the airless sprayer in action.
@azmalu Жыл бұрын
Hoping I would find part 3! These first two videos were very helpful. Just ordered today but trying to take in as much info as possible before getting started.
@TheBLACKMQQN2 жыл бұрын
Thank you Cliff for making my day easy breezy sir. Subscribed.
@wmgarnett252 жыл бұрын
Nice work Cliff. Great presentation.
@janiceblind4333 жыл бұрын
Great video and you expressed the procedure very well. I would love a copy of set up/clean up list. Have you posted it anywhere yet?
@KingFox76 Жыл бұрын
Good video Cliff, I’m getting ready to start using my Fuji HVLP sprayer and I found your video to 1, answer a question I had about using it in the house and 2, then answering my other question about an airless sprayer. Have a great day and keep up the great videos. Matt
@hughsb3 жыл бұрын
I agree with Billy below. I appreaciate your video. Helped a bunch!!
@xinixxagnix2013 жыл бұрын
Thank you Cliff for this video.
@juanjosejaramillo10162 жыл бұрын
Thaks, great video Cheers from Mexico
@TU-ks6pu8 ай бұрын
Excellent video… thank you
@loganherrera4046 Жыл бұрын
Well done.
@bzo2183 жыл бұрын
for anyone worried about splashing, aim the spray gun towards the walls of the bucket in a SIDEWAYS position. this will prevent splashing and instead any liquid will flow against the sides of the buckets.
@wildandfreemakhunter80983 жыл бұрын
Dude! Thank you so much this was super helpful!
@ccatdaddy642 жыл бұрын
Thank you for posting this video, well done, very clear instructions. It might be the POV of the camera but it looked like, at one point, you had your finger on the unlocked, pump on, and when you went from one bucket to the other, it briefly passed and pointed at your forearm. I'm thinking, it probably wouldn't happen, but if you sneezed, got distracted and squeezed that trigger....it dose say in the directions that if you shot yourself with paint, to go to the emergency room immediately with the safety data sheet on the paint can. Thanks again.
@IknowGodIs9 ай бұрын
Lastly, did you record taking the handle off the tube, removing the filter, cleaning, and reassembling. I think I’m just not strong enough for the wrenches to hold the one nut and the other. I’ll have to wait for to wake up in the morning.
@deekaps31963 жыл бұрын
Great video. Thank you so much. I saved this video and will use it as reference when I use my gun, which I am in the next couple days. 💗
@mulletman4910 ай бұрын
Cliff when are you going to do the upgrade and mods video with the Graco paint sprayer? I am getting ready to buy one and I would like to see that first. Please let me know. Thank you sir.
@livinthelegacy1003 жыл бұрын
Thank you! Very informative
@pr3sari003 жыл бұрын
THANK YOU...ur instructions were great..too bad im in canada, couldnt but it from ur link...MUCH THANKS
@BertWaite-q4xАй бұрын
Cliff, How can I get the checklist easier than what you have posted? Just purchased a Graco Magnum X 7 . Thank you.
@IknowGodIs9 ай бұрын
If you’re using the sprayer again the very next day, after you clean it out, do you have to put the pump armor in every time you use and clean the sprayer? Or can you use it the next day and then put the pump armor in the machine?
@RGIIIRedskins2 жыл бұрын
I have a question, how/where did you get rid of the the gallon bucket(s) of waste water/paint?
@hud2462 жыл бұрын
Excellent video series Cliff! I have a HVLP sprayer that I was considering using for some large projects and you verified all my concerns. I’m off to buy the X7! Thanks for the help! I would be very interested in seeing a video about your mods.
@robbyvanz4 жыл бұрын
Did u remember to disassemble your gun to clean the filter inside of the gun?
@drjohnson983 жыл бұрын
Thanks for another excellent video. I'm now ready to use my x7 for the first time and to property clean and store it thanks to you. Have you done one on the mods you did to your x7? I would be interested to see that also.
@CliffsGarage3 жыл бұрын
That's on my list of things to do but I'm just so busy with other stuff. Maybe soon!
@joseangelvilla808811 ай бұрын
What about the water that stays in the blue hose? Does it affect the hose in any way?
@mandeepsahota65502 жыл бұрын
How did you keep your sprayer so clean? I just used it and its a mess. It worked great but it looks horrible. But I love your videos. Thank you
@erichperez22173 жыл бұрын
are you going to make a video of the improvements you made?
@BBBruhpop10 ай бұрын
Why does the OSB in your garage not go all the way to the floor??????
@stevemoline95233 жыл бұрын
What improvements did you make? Swivel? Different gun or hose?
@richardramey59433 жыл бұрын
What was the type of attachment you were going to tell about to help with the turning twisting of the gun a d end of hose. Like you said its stuff and there was something you were going to add to help so it's not so stuff. Thank you
@jerodjohnson72402 жыл бұрын
spray gun swivel, and for the cleanup from garden hose get a ball valve so you can turn on an off at the hose end. So you don't have to keep going to turn on and off at the spigot.
@dudeorino46862 жыл бұрын
Cliff, Nicely done! Thanks. Hey, what did you do with the discharge bucket of paint and water?
@CliffsGarage2 жыл бұрын
I just poured it out in the back yard. Keep in mind that my back yard is over 10 acres :)
@casper24ism4 жыл бұрын
Will this be ok to paint whole outside of exterior house with deep stucco
@CliffsGarage4 жыл бұрын
I would think the X7 is a great choice for this job. It's perfectly capable of doing it, just not doing it day after day after day.
@lettycardenas40914 жыл бұрын
Thinking of getting one. All the steps to clean are a little overwhelming
@CliffsGarage4 жыл бұрын
Yes, it is at first. But if you're doing it regularly it wouldn't seem so. The steps make sense when you know why you're doing them.
@JacobSpring4 жыл бұрын
Agreed, airless and help definitely have different use cases. Airless has a lot more steps for protection but you will regret it if you don't. Many of their recommendations seem excessive (like pumping water through for 30 seconds before starting) but those are the things that keep these machines running for many years. I run 3 graco sprayers and have never regretted it
@JacobSpring4 жыл бұрын
Also, honestly the cleanup on the x7 takes about the same time as properly cleaning brushes and rollers lol
@carlosdena46943 жыл бұрын
Once u get throught it the first time, everything makes since, and it should only get easier. I just now finished clean up on mine. Should be smoother next time.
@joe683182 жыл бұрын
remove guard remove tip use top of tip to push out washer replace washer use bottom of tip put washer on bottom of tip push washer back in rubber in washer will hold onto bottom of tip when putting washer back in line up rounded portion so tip can be replaced in guard
@narco733 жыл бұрын
9:10 And don't do this part too close to your garage door! (great video by the way)
@investandcyclecheap48902 жыл бұрын
Step one, Put a drop cloth down !
@waltmummert3933 жыл бұрын
What were the mods you did?
@davelewis87323 жыл бұрын
Great videos, Cliff. Thank you very much. I know everyone has asked, but do you know where I can get that list?
@CliffsGarage3 жыл бұрын
The checklist is now available on CliffsGarage.tv
@davelewis87323 жыл бұрын
@@CliffsGarage Thank you, Cliff!
@veasnavlogsvlogs32733 жыл бұрын
💞👍
@IslaVision34 жыл бұрын
👏👏👏🤘😘
@ItsWizz2 жыл бұрын
Where are the mods
@luke98223 жыл бұрын
Every single video I see doesn't address the hose storage. Are you supposed to just leave water in the hose forever? Attached to the sprayer? Gun attached?
@tazblink3 жыл бұрын
I don't I drain and blow mine out.
@luke98223 жыл бұрын
@@tazblink Thanks for responding. I'm surprised the hose is not addressed in any videos from Graco.
@geeeee82683 жыл бұрын
same price HD vs Amazon...
@Fareedtariq Жыл бұрын
I had worst experience with this spray machine yesterday. I bought 3 nozzles 515 and 621 and everytime it jist stopped spraying nozzle gets stuck. I would NOT reccomend this machine