Bosch Purion200 Display, Install, compatibility and a close look at the Bosch Diagnostic 3 system.

[@Pedro-lo8rz]

Dave is well knowledgeable and he knows exactly what he's doing. He managed to resolve the ID conflict on my eBike with the Purion 200 in a matter of minutes. 5 Stars! 🌟🌟🌟🌟🌟

[@TheYorkshireBikeMechanic]

Hi Pedro, thank you so much, it was a pleasure to help, you know where to contact me if you need advice. thanks again

[@nicholasparry2521]

Just fitted one on my cannodale moterra Nero 3 2022. Fitted it myself and works perfect, no dealer pairing needed, just did it with flow app on my phone, I removed the kiox 300 and now have a clean cotpit

[@JJMTB_UK]

Yeah I pretty much did the same, uninstalled the flow app, deleted existing bluetooth pairing with ebike smart system, reinstalled the app and re logged into my account and followed the onscreen steps to reset everything up, it prompts for what controller you have, select the purion 200 and away you go all working fine.

[@dannyf5157]

Do you have to drop the motor to fit a new wire or did you just use the existing one thanks

[@nicholasparry2521]

@@dannyf5157 just used existing

[@camperp195]

Can you do navigation with it? Like with the kiox 300 screen?

[@Emtbtoday]

Yeah but can't use like the ebike lock and some extra settings basic one's you can still use till its hooked up l,it'll have a conflict till its put on the diagnostic with the change over skip to 7.30 In this he also shows it but works with the basics till its reset kzbin.info/www/bejne/oKSudKWgrr-dfpYsi=D52w9uWV87-C5PUr

[@hookerjl1]

Thanks for having us customers take a look to the Bosch Purion Update and Dealersoftware👍🏻😎Keep doing well, cheers mate!

[@TheYorkshireBikeMechanic]

Thanks for watching and your comments

[@hookerjl1]

@@TheYorkshireBikeMechanic you’re welcome!

[@OrangeyOranges]

My cube reaaction hybrid 2023 was delivered yesterday with one a purion 200 fitted from factory instead of the LED remote. Cant find anything online about this bike coming with it so a bit perplexed. Not complaining though!

[@Stoyan.Svilenov]

Is it possible to change from prion to purion 200…?

[@vladoivan7681]

I have the same question. I dont need smart functions.

[@TheYorkshireBikeMechanic]

Hi, Thanks for watching and your comments, no, your system needs to be smart.

[@urabus_]

Спасибо за обзор, у вас нет обзора, как работать с програмой бош диагностик, как убрать ошибки системы и настроить свет?

[@kevbulmer]

Brilliant video Dave, keep them coming

[@TotalFisherman6502]

Got a trek Marlin +6 and I’ve managed to snap off the display at the Mount, would it be possible to buy another complete Puron 200 unit and replace it? Or will it have to be tuned to the new display if that makes sense? Thanks

[@TheYorkshireBikeMechanic]

Hi, if you replace it with a new one you may get an i.d conflict in the flow app, if you can’t resolve it through the app you will need to take it in to your dealer.

[@TheYorkshireBikeMechanic]

A quick update, to all who have commented regarding the ability to setup in the flow app, it would appear that this can be done, my apologies for the misinformation.

[@besmirhoxhaj4243]

Hello sir your videos are great I got a question I bought a used ebike and it was registered with the other phone the probelm is we can't have access to that phone any more because it's not available any idea how can go about thanks in advance

[@kevinwebb9538]

Hi Dave, great video thank you. Just wondering if you need to change the cable to the motor ? I gather that you don’t have to, but notice that you did in the video. Thanks.

[@TheYorkshireBikeMechanic]

Hi, Thanks for watching and your comments, you dont need to if its a led remote your replacing

[@only82_]

I installed the purion 200 but my dealer was unable to resolve the conflict and I had to replace the old remote LED. Advice? Change dealer?

[@TheYorkshireBikeMechanic]

Hi, Thanks for your comments, the dealer could have logged case with Bosch to find our why

[@frederickasbury8975]

Installed Purion 200 on a Co op DRT 3.1e, had to unregister bike using the original controller then reregister with the purion 200 to allow it to pair using the Flow app. Lock feature works however it interferes with charging since it keeps locking out during charge, it shows the % of charge with a lock, is this the ID conflict mentioned? I thought the lock would not work at all if there is a conflict? Disabling Lock feature seems to resolve the charge lock out

[@Rorolap]

Do you confirm now ? : no need technician software after upgrade purion 200, the flow app do the job to have ́o conflict

[@Вальдемар-р6я]

Благодарю вас за обзор!!! Я не совсем понял перевод, уточните пожалуйста если подключить Purion 200 к смарт мотору 5 поколения без дилера, то Purion 200 вообще не будет работать? или будет просто показывать скорость и заряд , но не будет работать с програмами BOSCH без дилера ? жду ответ , благодарю!

[@ridersparadise2299]

Great video and greetings from the Philippines. My Cube bike hung up during software download via the flow app. There is no dealer here in the Philippines for the Bosch SMART system, I did the import myself. Any idea how to resolve this? The diagnose system is sold only to dealers as far as I know.

[@TheYorkshireBikeMechanic]

Hi, thanks for watching. your best option is to telephone Bosch direct to see if they can help

[@ridersparadise2299]

@@TheYorkshireBikeMechanic contacted them already, their reply was I should talk to the importer, but I imported myself. Was hoping that someone could "lend" me the software. Have a nice day!

[@amitshivkumar2561]

Great Video. Can I use Purion 200 as a secondary display along with my Kiox 500?

[@TheYorkshireBikeMechanic]

Hi, Thanks for watching and your comments, yes you can but contact bosch first

[@tonygregory2553]

Ayup Mon ami, yes all does as indicated, but the customers bosch flow app doesn't recognise the bike any more. What is the procedure for removing your bike from the flow app, without loosing existing ride data etc. Cheers.

[@TheYorkshireBikeMechanic]

Morning, your going to need to contact Bosch for there advice as it’s account related, I can only help if I have your bike in the workshop

[@frederickasbury8975]

Perhaps this will work? Installed Purion 200 on a Co op DRT 3.1e, had to unregister bike using the original controller then reregister with the purion 200 to allow it to pair using the Flow app.

[@CABEZAS50]

Hello how are you thanks for the video I would like to know where I can buy Bosch diagnostic tool for my computer thanks

[@TheYorkshireBikeMechanic]

Hi, sorry for the late reply, I am well thank you, the software is dealer only i'm afraid.

[@valec1986]

Hi dave, is nessesary change a cable also ?

[@TheYorkshireBikeMechanic]

No, the cable stays the same. Thanks for your comments

[@valec1986]

@TheYorkshireBikeMechanic youre viseos are awesoms

[@A18M54]

Hi Dave! I have a Bosch Purion Display and was wondering if upgrading to Purion 200 Display is possible? I have a Trek Powerfly 4 with Bosch Performance Line CX.

[@TheYorkshireBikeMechanic]

Hi, you can only upgrade to purion 200 if you already have the smart led remote

[@Emtbtoday]

I'm guessing this ebike had a damaged cable to led remote if you had to run a new one? As we know the one's already there work with purion 200! We are all using them and fitting these ourselves just now with the new info out how to avoid a dealership pairing as it should have been plug and play from the start!

[@TheYorkshireBikeMechanic]

Hi, thanks for watching and your comments

[@martinbywater]

I think it’s installed adjacent to the left hand grip. Ie inboard of the brake handle

[@TheYorkshireBikeMechanic]

Hi, Thanks for watching, I agree, this customer likes to move his cockpit around so thats when it was left in that position.

[@Mr_RichardH]

Great video again, Dave.

[@TheYorkshireBikeMechanic]

Thank you

[@CATA20034]

What if you just replace the purion without service upgrade?

[@TheYorkshireBikeMechanic]

Hi, it won’t run correvtly

[@alanhiggins6059]

I have cube 140tm 2023 I took my old controller put 200 on pair it working very good did not have go cube dealer pair it been updated by flowapp

[@davidscullion2379]

Hi Alan . I just got my self a cube 140 pro I was thinking of getting the purion 200 to upgrade existing control . I am a bit weary about this with conflicting stories about Bosch having to pair it or you can do it yourself on the flow app. Did you have any problems . Thanks

[@alanhiggins6059]

@@davidscullion2379 very easy I upgraded fantastic bit kit really good you won’t have any problems

[@LookintomyBarrel]

Hi, will an update on bosch render my smartbox useless?..thanks

[@TheYorkshireBikeMechanic]

whats a smartbox??

[@markwhiting3864]

Nice one Dave, can't wait to try it out 👌

[@TheYorkshireBikeMechanic]

Hi Mark, It's a great little unit

[@AZZINATOR4]

I have the purion one can i upgrade to this?

[@TheYorkshireBikeMechanic]

Hi sorry no you need to have an led remote

[@denesk2794]

Hi from Costa Rica ... also ... what chilly weather are you talking about? LOL I am still not in peace with the Bosch controls/displays. While I hate Shimano (EP8 is the plague, on 3rd motor) , I have to say, that the minimal switch and the display in the middle is a good balance. That said, I think Specialized got it (almost right). Display in frame, switch on bars. I just wish they were wireless (like the Garmin remote or the Sram AXS things)

[@TheYorkshireBikeMechanic]

Hi, Thanks for watching and your comments, Costa Rica is a place I would like to visit.

[@mikesimmonds1916]

Is that an old Orange clockwork on the wall above you? Classy

[@TheYorkshireBikeMechanic]

Hi, Yes it's 1990 ish clockwork. something different to put on display

[@mikesimmonds1916]

I have one the same. I recognised the forks strangely.

[@janclark8438]

Not great positioning of the screen when you turn the bike over on its seat/handlebars to fix a puncture or sort the chain.

[@neilelliston]

Can you swap country code to USA for a 20mph limit?

[@TheYorkshireBikeMechanic]

Hi, no, they are programmed at source

[@neilelliston]

@@TheYorkshireBikeMechanic damit

[@euanbegbie]

It doesn’t need pairing with dealer software. It is diy fit with flow app

[@TheYorkshireBikeMechanic]

Hi thanks for watching, only a dealer have access to the software needed to set it up. The flow app doesn’t

[@euanbegbie]

I have now fitted 4 with no dealer software and have had no issues.

[@davemcnish4235]

Great video dave 👍

[@TheYorkshireBikeMechanic]

Thanks 👍

[@dbcooper7326]

Superb content. Thank-you for your efforts.

[@TheYorkshireBikeMechanic]

Thank you

[@garth62]

Excellent - great vid thank you

[@TheYorkshireBikeMechanic]

Glad you enjoyed it

[@VovanCBR]

Thanks, I do not have a dealer in my country, even app I cant install, as I need to download using VPN

[@TheYorkshireBikeMechanic]

Hi, Yes some dealers are very few im afraid

[@rogerquenault7207]

How often should I take my Bosch powered EMTB into my dealer for a service?

[@islandaerial3414]

There isn't any 'routine' service on Bosch DUs. You'll just have to wait for the bearings to blow or, you get the dreaded 500 ERROR code. I know because I am on my 5th Gen 2 DU 😉

[@TheYorkshireBikeMechanic]

Hi, regarding the bosch systems on your bike,It's worth booking it in every 6 to 12 months to check for any firmware updates for your system. your motor inside is not a serviceable item.

[@rogerquenault7207]

@@TheYorkshireBikeMechanic Thanks

[@irisgallati]

Why is there a Swiss Flag on your wall? Greetings from🇨🇭 😊

[@TheYorkshireBikeMechanic]

Hi, Well spotted, My Eldest son lives in Geneva, he works in a bike bike shop as a mechanic

[@irisgallati]

Oh, so cool! Lived there for a year! Wish him a very nice time in Switzerland! 😊👍 Good mechanics are needed everywhere!

[@martinreilly9743]

Where ya been dave 👏👏👏

[@TheYorkshireBikeMechanic]

Hi Martin, just been waiting for an opportunity to make a good video.

[@nigel22347]

28 in Durban!

[@TheYorkshireBikeMechanic]

thats a bit warm but sounds nice, Durban looks like a nice place, nice beaches, whats it like

[@thediscoman2001]

great video but whats the point of the diagnostic no good to anybody other than a shop or the company , so basicall;y no disrespect but total waste of a good video