We Tested the Cheapest B58 Turbo Kit On The Market.

[@ThicWhips]

One correction or note I’d like to make. This isn’t exactly a hybrid turbo, it’s not exactly a full frame turbo. It’s a bit of a mash up of the two, integrating a manifold as it does on the hot side, is similar to what you would see in a true hybrid. Nonetheless, for the cost you are getting quite a lot for your buck! Thanks for watching.

[@tdpsupra]

So I’m the guy with the white Supra on the website my car made 900hp/1008tq with this kit an now making 1000hp with it. No pure turbo is doing that. Also have been running this turbo for almost a yr and no problem also it is a full frame turbo and can be swapped out for a bigger remnant turbo that will be released in the future. Great job representing the product and being honest.

[@ThicWhips]

Congrats!

[@BabaYagaRacing]

That's alot of torque. What engine build?

[@vonksummer9099]

Built engine ?

[@tdpsupra]

@@vonksummer9099 nope not yet stock block tq record

[@tdpsupra]

@@BabaYagaRacing stock block record

[@RemnantPerformance]

Thanks @ThicWhips to you and the rest of the CES team for taking the time to properly install and do a review on the 65 OMEGA turbo kit for the Supra and the various Gen1/2 B58 Platforms. Truly honored to be featured here. A couple of comments: • This is simply another adaptation of our already existing OMEGA series turbos so it carries the same 1 year warranty on up to 45psi continuous operation that all of the OMEGA series turbos do. To mate it to the B58, we simply developed a new custom integrated turbine housing / exhaust manifold that could allow the stock EWG to be brought over and retained. • All Downpipes for the stock turbo fit however, due to the 1” longer runners on our custom 2 port and 6 port manifolds, you won’t be able to hook the bracket back up to the stock connection point by the side of the engine block which you had briefly mentioned in the video • As of 3/22/24, we currently have cars with over 23K miles on this turbo kit with no issues and numerous 6, 8, 10 and 15hr road trips. In addition, since this is a standard OMEGA series CHRA, we have customers on other platforms with over 50K miles and 4+ years on their turbos with no issues. Again, thank you for the unbiased review and a big shoutout to all our customers that came out to offer their insight in the comments section. Truly thankful!

[@ThicWhips]

Awesome man, thank you for giving us more information. We love the kit, it’s an extremely good option for the Supra guys!

[@behindthebuild8016]

Please get a RHD kit version hearing that there’s custom fab needed by RHD installers

[@zonta647]

I bought the Remnant Performance Turbo kit and installed it myself. So far, I'm loving it. It sounds amazing and their customer service is awesome. Fast response times with troubleshooting. Highly recommend.

[@ThicWhips]

Nice!

[@MrJsevo29]

This has got to be one of the best turbo info videos I've ever seen. That guy does a terrific job of articulating the information and seems very unbiased in his assessment. Videos like this for the G8x and various turbo options would be absolute bangers.

[@ThicWhips]

Thanks man

[@SlokeyPokey]

Been eyeing this turbo for a while now. Good to know everything fits as should. We wanna see more of that beast after he gets his fueling upgrades 💪 bring him back soon!

[@thraxbert]

I have a Remnant kit. It's awesome! Definitely worth pairing with a fuel upgrade, but not needed. This is my second car with a Remnant Performance turbo and I love it.

[@ThicWhips]

Thanks for sharing!

[@1FastMKVSupra]

Thanks for featuring my car, appreciate it!!

[@ThicWhips]

Any time!

[@alessioluppino4312]

Can your give use a review? Would be interesting know how is on the road with the tuning etc. Congrats for the car, so clean and gorgeous 🙏 if you have IG i would like to ask you in dm some info

[@Oni-Racing]

I have the worlds 1st 6port 65 omega turbo. It’s a beast!

[@AJUSA1]

Refraction blue is sooooo 🔥

[@jimmyphipps166]

Love my remnant kit on my a91 refraction blue!

[@brianbaron3792]

Hey brother thanks to your videos going to be bringing my 2024 anniversary Supra over for intake exhaust downpipe mhd tune been talking with John.

[@ThicWhips]

That's awesome

[@jaimehurtado356]

Great work on the video, I don't even have a Supra or plan to get one but still enjoyed the knowledge

[@mikew4796]

Great info and comparison!

[@ThicWhips]

Thanks for watching!

[@micraw714]

Great job showing the whole process and results! Curious if you guys have had any Pure cars come back with seals leaking? 😢

[@ThicWhips]

Nope

[@micraw714]

@@ThicWhips that's good to hear!

[@Not_jdm_af]

Sam is the Goat

[@BabaYagaRacing]

Nice color

[@NudyCash-cu3lt]

Vr30 better

[@WMTJr]

Fantastic video! I wanted the Remnant kit but now I think I’ll await the 900 to drop and decide when you do your testing. Being that I have a few modifications already and there are some tuning upgrades coming down the pike at us I may be going you in NC when things have finally materialized. Question! Remnant has a huge downpipe and exhaust system for there kit. Do you have any intention to test a remnant kit with the downpipe and their exhaust included?

[@1FastMKVSupra]

I plan to install the exhaust on my car in the video. Remnant is currently redesigning the mid pipe on that exhaust and switching manufacturers so it’s currently off market at the moment.

[@WMTJr]

I reached out to them after I realized you didn’t have their exhaust on. Are you going to put it back on the CES Motorsports dyno? That should be very interesting.

[@marklinley815]

Another good video man. Anyone done a DAW ultra flow or R version on their A90? Curious to see how car responds to that turbo that I have compared to the Pure 800/850 with the proper fueling mode.

[@cku617]

My friends m240 does 6.7 60-130 with the daw ultra flow with port on pump e

[@nehemiaslabrador2288]

@@cku617 that’s not that fast. But not bad

[@ThicWhips]

Talk to reputable tuners and see what they say about DAW turbos. 😉

[@marklinley815]

@@ThicWhips they love them minus one of them. 🤪

[@marklinley815]

@@cku617 that is good numbers if you ask me. Plenty fast.

[@juicedupgenetix]

One of the best kits on the market

[@DeDom]

Talking about longevity. Still running okay?

[@Smooveee]

Awesome video 🔥🔥

[@tshepongake7209]

What did Alpina do with B58 in their B3 5/5 editions to get that twin setup?

[@donhoang9878]

its a s58

[@carmello000jp]

Nice xona 11569 turbo over here

[@yadsnoah6855]

This was amazing

[@ThicWhips]

Thanks

[@forzafanatic8359]

That turbo definitely looks like a Garrett G Series rep.

[@thraxbert]

That's because they used the same ODM that makes Garrett, and built a turn to their own spec. Garrett also does not make their own turbos.

[@kevincoy6969]

weren't you guys doing MHD tuning? switched to bm now ?

[@ThicWhips]

We do all platforms of tuning. It’s up to the customer

[@nehemiaslabrador2288]

What’s the eta on his return with pi?

[@1FastMKVSupra]

Not planning to drop another $15k anytime soon. PI will probably cause the transmission to have some issues. If I want more, it’s likely going to require stage 2 trans, PI, and manifold.

[@JulianVR4]

Port injection setup is 15k on these?!!

[@JulianVR4]

Ah you mean the trans, bigger turbo, AND port inj?

[@1FastMKVSupra]

@@JulianVR4 That. Stage 2 trans (1000ft tq capabile) build from Pure is $10k alone without labor. Manifold is roughly $5k before labor, PI setup is about $1-1.5K without labor. The Supra is relatively cost effective to take up to the limits of the trans (roughly 600ft tq) and beyond that, the bills get substantially larger.

[@BabaYagaRacing]

​@MikeBaloga you don't need a stage 2. A stage 1 is plenty that's what I run. You can do fueling and tuner can keep torque down to keep the car healthy and trans happy

[@APATHTC]

The only only thing that I think should have DEFINITELY been retained was the wastegate actuator heat shield. I know it didn't fit, but That shit is plastic next to the hottest item on the engine. Modify the heat shield and spray it black. Done.

[@ThicWhips]

We used heat wrap and a heat blanket. But yes, that was our only concern as well.

[@turk1998]

600whp with stock di right how is it possible mate did you spray the methanol mate?

[@ThicWhips]

Nope. Stock DI. Ethanol tuning allows us to lift to 600whp or so

[@turk1998]

@@ThicWhips gotcha bro what do you think about daw ultraflowR can it make close to 600 with stock di mate

[@BabaYagaRacing]

​@@turk1998I wouldn't worry about dyno numbers. That stuff is irrelevant imo. Draggy & trap speed > dyno numbers Anyone can inflate a dyno

[@anzspy5]

Is there any disadvantages not upgrading PI fuel system ? Besides not being fast.

[@matthewchevres4970]

Additional fueling from pi especially higher e-content will not only produce more power but more protection for your engine due to the cooling benefits. Adding an csf manifold etc also does the same

[@1FastMKVSupra]

Folks like myself haven’t done PI because going that route will also likely need an intake manifold and a transmission build, it’s another $10k minimum.

[@matthewchevres4970]

I feel you brother, i don't blame you. I did do pi w/cfs intake manifold and top mount 6466. We did manage to limit torque around 625. Im going to build trans though. Definitely an investment

[@1FastMKVSupra]

If I decide to keep the car long term, then yeah, I may end up going that route. :-)

[@BabaYagaRacing]

​@@matthewchevres4970go with pure trans

[@ammo444]

@thickwhips didnt your 340i with DAW make more power than this 😮

[@ThicWhips]

It was like 620whp or so

[@robertbrathwaite4191]

Very smart man he knows his s***

[@nehemiaslabrador2288]

Port will change the whole story .

[@ThicWhips]

Yes

[@dwill876_]

Just for shits and giggles how much would a total build with labor included should be estimated?

[@m____2-l7y]

I like it ❤

[@m____2-l7y]

.

[@ImFastBoi.]

China 🇨🇳

[@israelpoop5557]

best sounding hybrid ive heard tbh

[@JJacobian]

first