THINNER and CLEANER (home made save $) for Airbrushes, paint, etc.

"HOME BREW" SAVE MONEY! Works great for Airbrushes and Brushes, and the thinner can thin any acrylic paint. This is very feasible for everyone and all products are all very easily accessible. This theory allows you to buy more paint!! This works for hobby acrylic paints such as Citadel, Tamiya, Vallejo, Testors Acryl to name some popular brands.
Some good top secret information in here, you just have to watch the whole thing unfortunately.
-Become A Patron: / surerockco
-Visit me on Instagram - surerockcomodels
Enjoy! : )

[@chinboful]

Excellent, great results. thank you

[@paulishii2478]

This is what I was looking for!.. thank you

[@chuchuchip]

You can start with alcohol, water & glycerin first, then add the Windex. You won't get bubbles that way. I got this recipe from somewhere else & use 90% alcohol. Works fine. Glycerin is also used in baking. Audio goes in & out.

[@zenoblevinsbigz6665]

Awesome and very informative. Thanks for sharing.

[@CrucesNomad1]

Im looking at dishwater softener, rain-x, and awesome cleaner.

[@theaussienurseflipper.8113]

You can use an alcohol calculator so you can add water to know 99% and bring it down to 70%. IPA quite expensive here in Australia could I use methylated spirits aka denatured alcohol? I heard you can make flow improve over from dishwashing rinse aid. 3mls to 1 litre of water. Cheers Graham

[@robertdaone]

Cant you just substitute the alcohol and glycerin with hand sanitizer since that is what its made of oh and water also?

[@normansmith8184]

From England, great stuff, thank you.

[@DjRoan_only_top_kizz]

can i use 90 grade PINK denaturate alcol instead of transparent iso 91 for both CLEANER & THINNER? Will the pink contaminate the acrilic color in the thinner case? Thanks

[@surerockco.models3452]

You would have to test it to get your own best results. That way you know what brands work where.

[@gregory6488]

Do the commercial acrylic airbrush cleaners have IPA in it?

[@fadiyassine3483]

Hello i cannot find 91% iso can i use other engridient

[@fadiyassine3483]

Hello is there any home made cleaner for airbrush using edible ink you can help me with

[@scottyboy6269]

Createx new reducer that works better has acetone and glycol. Wonder if its possible to create that

[@darlenegurney]

I'm confused, For the extender, I think you're using the 70% alcohol and mix it 50/50 with a distilled water. Doesn't that make the alcohol lower than 50%?

[@rider660r]

Yes,it's right around 35% then. If you were using the 99% it's be almost 50% after diluting it.

[@dannygonsalez27]

Surerock,i have the 70%isoprpyl,my wife use it for manicure, should i use that without water than and add glycerine in it.

[@surerockco.models3452]

Hey, that should work perfect! Always test on the side just to make sure everything goes with each other.

[@dannygonsalez27]

@@surerockco.models3452 surerock i wanted to know if it also possible or do you think i can use the 70% isopropyl for the cleaner brew..for the thinner part its solved for me. Dont gave to buy thinner for acryl:)

[@mynorroldan9294]

IN THE FORMULAS DOES IT HAVETO BE DESTILLED WATER ..

[@mlys7184]

I'm glad I came across this vid. Completely agree with 70% IPA instead of a 90-99%.

[@timbrown7992]

99% IPA evaporates much faster than 70%, so the product remains on a surface longer, is better for disinfecting Great via, thanks

[@alvaroguerra2882]

Why I cannot drink, obvious joke hehe, thanks for the video :)

[@TubeYouGuru]

What is the difference between the blue and the purple cleaner?

[@frostbackgarage9289]

blue is stronger and purple is lighter and used to clean the blue off. I spray in my garage and dont always goto the sink so this helps me stay longer on one project just using multiple cleaners right ay my desk.

[@jamesbutler5995]

Do to Covid the only isoproplyne I can find is 70% will that make any difference? Thanks for sharing!!

[@ravebrave8866]

70% is the real winner....

[@OwlOnTheGo]

Why do you need a second cleaner to remove the ammonia? Couldn't you just flush it with water to remove the ammonia left in the airbrush after the first cleaner? I've not seen anyone do a 2 part wash before, and want to understand it a bit better. Thanks! (also, wanted to add that the name of the sheet required for all of these is a MSDS...Manufacturer's Safety Data Sheet)

[@surerockco.models3452]

Thanks for the input. Ultimately its just to be different. It could be also to insure a proper cleaning of the ammonia before a water flushing. I personally do it this in my garage so I don't use running water like others may have access to. This gives me a piece of mind at least minimal ammonia is remaining before splashing h2o at it. I use little squigy bottles and keep everything contained in a little bubble so I am not moving all over during a paint sesh. I have used a tap before and makes a world of difference lol .

[@bassamsiblini9386]

Hello Friend, would it work if i use ethanol Alcohol instead of Iso ? Thank you

[@surerockco.models3452]

@Bassam Siblini Hello my friend, I would try a little bit first. Never hurts to try it on the side first with a small sample. Also, depends what brand paint and chemicals you use. Test first. Welcome!

[@bassamsiblini9386]

@@surerockco.models3452 Hello again and thank you for your reply, i will try it and let u know about the result. Many thanks

[@slipknotfan2217]

@@bassamsiblini9386 did it work? i also want to use ethanol

[@bassamsiblini9386]

@@slipknotfan2217 I did not try ethanol yet, i had a prob with my air compressor, waiting to fix it first. I will let you know

[@defdeez8371]

@@slipknotfan2217 ethanol works fine

[@claptrapthedestroyer]

could tap water be used instead of distilled?

[@surerockco.models3452]

some areas have "heavy" water or more minerals in it. That wouldn't be good to add extra minerals, solids into the paint/cleaner. Check your area to make sure

[@dosdont]

Some say with "ammonia" some say without 🤦🏻‍♂

[@pan.satyros131]

can you use 70% Iso instead of 99%?

[@surerockco.models3452]

In my opinion 70% is the best. 99% is pure, and 70% is diluted with 30% water, which again is actually stronger than 99%.

[@surerockco.models3452]

In reference to making the cleaner I would stick the 99%. If you only have 70% its no problem, just add 30% less water to your formula.

[@pan.satyros131]

@@surerockco.models3452 Yea I can only find 70% in the stores and that just recently showed up. haven't seen 99% for months.

[@justnkace420]

the bass in your voice seems to make your mic cut in and out alot

[@mordantly]

Dude, hire a kid that won't keep covering the mic.

[@BigAndTall666]

Just buy the proper stuff!

[@rider660r]

It's hard to listen and comprehend at the same time isn't it?....

[@ravebrave8866]

the Big dumbola is here...