This $15.00 part is ALL IT TOOK to fix my 2017 Ford Mustang GT!

Рет қаралды 1,999

Күн бұрын

Пікірлер: 33

@bryan5.0g 8 күн бұрын

I’ve had this issue for about a year and a half and finally decided to do it after seeing this video and mine was missing a third of it! Waiting on the part now and hopefully I won’t be seeing those lights anymore!

@catchthecarp 2 ай бұрын

I replaced the drivers side rear wheel bearing on my 2017 GT and after the repair I noticed an intermittent metallic clicking noise from the same wheel when leaving from a stop. After researching the issue I felt certain it was the thrust washer. Bought a new thrust washer and axle nut from the Ford dealer and installed which fixed the clicking noise. Like you I had to remove the vertical link to get to two of the bolts. This is a very doable repair for a DIY'er. A word of advice - if you ever have to replace a rear wheel bearing be sure and buy a new thrust washer and axle nut, too!

@survivetothrive21 2 ай бұрын

Absolutely! Next time I do another wheel bearing on this car, I’ll definitely just buy another trust washer too

@plewis4105 26 күн бұрын

Had the exact same noise. A mechanic replaced the wheel bearing which didn't fix it and just had the trust washer replaced and car drives like new. Also on rear left side.

@rich7355 2 ай бұрын

Thanks for providing this video. I need to do one of mine and this gave me a lot more confidence to get err done.

@survivetothrive21 2 ай бұрын

I’m glad it helped!

@michaeldenson1929 12 күн бұрын

You’re a hero.

@raymondbradley6788 7 ай бұрын

Thanks Khori👍👍👍

@vbt700ibanez 6 ай бұрын

Thank you for this video it really helped me. I’m definitely doing this job myself . 👍🏼👍🏼

@survivetothrive21 6 ай бұрын

Great to hear!

@carlosnajera876 5 ай бұрын

I have the same problem I never installed the washer now I have the clucking noise

@SklepMultigres 29 күн бұрын

Hi, what size is the hub nut wrench? How tight do you tighten the hub nut?

@survivetothrive21 29 күн бұрын

It’s a 32 mm socket with 90 ft lbs plus an additional 45 degree turn.

@SklepMultigres 29 күн бұрын

@@survivetothrive21 Thank you very much. Good luck!

@miguelsoto732 3 ай бұрын

This video saved me! Mine was hanging under the shaft.

@tomgriffith1952 7 ай бұрын

Nice work!

@EthanArroyo-b1w 4 ай бұрын

Did you also have service advanced trac and abs light?

@survivetothrive21 4 ай бұрын

No but I could see how it could potentially cause those lights. If

@thegreeknrican1906 Ай бұрын

Did you lose abs, traction control, hill assist? Trouble shooting mine having this issue. Changed speed sensors, front hubs, all control arms, links & rods… still can’t get them back. Did notice a “creaking” from the rear, thought it was just spring movement but sounds just like the noise you had. This could be the fix!

@survivetothrive21 Ай бұрын

I didn’t lose ABS or anything. Just had that clunk from the rear end. But it COULD potentially create those issues.

@thegreeknrican1906 Ай бұрын

This was EXACTLY IT! After spending $200 to be quoted $4k… Based on the diagnostic I replaced both front hubs and sensors, all front control arms, tie rods & links myself. Still had ABS & Hill assist going off! Figured Id try changing the rear hubs and saw your video. Ordered the 2 washers and hubs… did the job today… no more problems!! Thanks for the video and reply! Saved thousands!

@survivetothrive21 Ай бұрын

@ heck yea man! Glad it helped so much!

@plewis4105 26 күн бұрын

I just had this problem, it was the speed sensor tone ring, mine was corroded. I also had this issue. Changed both and the car drives like new.

@tylerbrooks3273 5 ай бұрын

The reason the new lug was a 21 and the others were 22 is because the lugs have an outer aluminum shell that over time will swell up.

@RidinONChrome 6 ай бұрын

Good video. I've come across this issue a lot on the S550 facebook group. Did you just start with the drivers side thinking it was it? Did you change the passenger side? I wonder if just using a metal ring the same diameter would work also. Thanks for the vid.

@survivetothrive21 6 ай бұрын

I haven’t done the passenger side yet but I figured it was the drivers bc I had someone inside going back and forth while I stood directly beside it. They say you can just completely eliminate that thrust washer

@RidinONChrome 6 ай бұрын

@@survivetothrive21 Oh really. You can take them out and have no problems? Interesting.

@aaronmiller2561 7 ай бұрын

At first I thought you were starting up your jeep and I was like that sounds horrible then realized it was the mower lol

@survivetothrive21 7 ай бұрын

🤣🤣

@pchamp_76 7 ай бұрын

Awesome! Probably saved yourself $1000 doing it yourself.

@artychamp 7 ай бұрын

After watching last couple of videos looks like this is becoming another "look at all my toys" trucking channel. That being said,I did chose to watch though

@survivetothrive21 7 ай бұрын

I can understand why you’d say that. But I simply like talking about my interests that I’ve acquired through my hard work. Cars are my hobbies. This channel is MOSTLY trucking, but the reason I didn’t put anything referencing trucking was so I could do things like this video. And this video was intended to help anyone who may have the same issue but can’t find the clunk before they spend a fortune on unneeded parts. But I do appreciate you watching it and stay safe!