This 2014 Subaru WRX Will Either Blow Up or Be a little Monster...

[@paulmarsdensr1095]

It's nothing like chilling on a Saturday morning watching Smeedia maintenance. Subies forever guys and gals.

[@Smeedia]

My man's 🤝🤝

[@karatekkid8314]

Right!

[@builtsubarusti7408]

Same here while drinking coffee!

[@joelansell3516]

i’m doing exactly that right now 😂

[@Jdm2005sti]

Definitely a good meet up to see the build in person and chat it up. The brace I have for my gd sti is from Turn In Concepts Carlabs X-Brace

[@Micah_Makes]

Thanks for the plug on the 3MI Racing AOS Drain Line! Looking forward to your feedback on it.

[@Smeedia]

Makes routing the hoses WAY better than the standard way

[@calebtando460]

so many car meets today, always the classic sat at griots on 38th in Tacoma on a sat, after I got off work I drove by the sheriff station on meridian and saw tons of cars in that abandoned parking lot, gotta love it.

[@Smeedia]

How do I find out about these meets 👀

[@Levitations]

Love what you’re doing with this hatch man killing it as always. Every video is gold for anyone watching that works on subarus

[@Smeedia]

Thank you my friend 🥳🙏

[@ahmadnajmuddin6954]

you deserve more subcriber bro ,so much good stuff and info on this channel and more important is you always positive facing a problem on your build 👍🏻keep it that way ,you are the best .

[@human_concept225]

Subie life! I just picked up a jdm 05 gt spec b tuned by sti. Can't wait to restore it while watching this channel. So much detailed info I'm learning heaps. Also jealous of the "backup 6 speed" but I'll get there

[@Smeedia]

Congrats and jelly on that spec B!!!!

[@rpdallast5965]

Thank you very much for going over the pcv system be for you fulling install can you also go over the vacuum system on the intake, I have some ports that are missing hoses and don’t know where they go.

[@Smeedia]

It's going to be difftent for each set up but I can go over how mine will be routed 🤝

[@rpdallast5965]

@@Smeedia Please and thank you I have the same Engine just in a legacy gt. I have still not been able to find the huge oil leak. But I believe its from the deleted oil feed hole on the passenger cylinder head. I probably didn't torque it down.

[@rpdallast5965]

So, I figured it out the the screw was hand tight and did not have a copper washer on it . As soon as I touched it, it started unscrewing . smh

[@DarkInstinct05]

Allegedly the 'Plastic Fantastic' has some really good flow rates.. I was reading a thread in NASIOC about intake manifold flow rates and what manifolds had the most even flow rate through each intake runner.

[@Smeedia]

I could see it, they're designed rather well and I would assume less heat transfer since it's plastic

[@ThatGuy-yj3lu]

Much more uniform production process as opposed to a high volume cast manifold with residual casting flash all over it. We had a customer making over 550whp on a plastic Spec B manifold, back when that was a difficult number to achieve on a street car.

[@groo2765]

I’m glad your working on this. I have this exact engine. It’s in a fozzy….

[@Smeedia]

We shall see what it's limitations are 💪

[@Xeritium]

Always love hearing the Blubaru. Can't wait to see how the hatch does with all the new stuff you're throwing on.

[@Smeedia]

Very curious to see how it sounds and how it performs

[@Brett4517]

I 100% agree with you on RCM. I have their mods all throughout my STI. I was blown away by the quality of their CNC parts. I work in the CNC industry, and the quality blows most other companies out of the water. Beautiful tool paths, no tool chatter, no signs of any defects.

[@Smeedia]

Their QC is top notch as well, I haven't seen and issues ever slip by them

[@paulmarsdensr1095]

Look @the Bluebaru coming to a theater near you.🤣

[@Smeedia]

😅😅

[@AaronAnderson323]

The built-in oil cooler on the CSF radiator drops oil pressure by approximately 20 psi.

[@Smeedia]

That's a decent amount 👀

[@TDT0188]

why is this? are the ports too big? too much capacity? do other external oil coolers suffer from this but to a lesser extent?

[@AaronAnderson323]

@@TDT0188 My understanding from the manufacturer is this is an element of the compact cooler core design used for this package. Turbulence is used to cool the oil as it passes through the core. The external Setrab core based solutions usually have approximately 1 psi pressure drop across them.

[@TDT0188]

@@AaronAnderson323 ahhh i see, good to know thank you.

[@nickdavis8194]

I got the same turbo on my forester and I get my power tune this week I just hit my break in miles last night

[@Smeedia]

Let me know what you make!

[@roli710]

Idk if you know this already but I was told to use the oem subaru coolant caps to avoid pressure drop on an aftermarket radiator. My friend had the problem and switching back helped him out.

[@Smeedia]

As. Long ad it's the same type of cap and pressure cap it should be find to use after market ones 🤝

[@solaris852]

love this channel. only found out about them at the start of this build but so far im addicted- checking back every day. good work

[@Smeedia]

Eyyyy thank you my friend 🤝🤝🤝

[@fraserlordly2432]

I actually saw a moto IQ video a while ago that actually quantified an air oil separator. He said on the street they noticed it didn't really make a difference. But when they went on a track the bottle filled in 3 laps and was overflowing. So finally for me that helped a lot.

[@Smeedia]

Older video? Think I've seen that one 👀

[@automedik9048]

Hey Tanner, I believe the hks belt is Kevlar which has different spacing specs for the guides. This was not touched in the video and just wanted to give you the heads up. Abuddy just had his Kevlar belt snap because he kept the oem guide and had it to tight. It eventually ate through the belt. I believe the spacing should be 1mm for Kevlar and 0.5mm for an oem timing belt.

[@Smeedia]

Tbh I don't even use oem guide specs. I fold a piece of paper 5 times then use that as my spacer. But good info to add in 🤝🔥 That would not be a fun time to have to deal with 😮‍💨

[@christopherharrison8887]

God Damnit. I have hours of work to do. I go to KZbin to put on music and ALWAYS click on your videos. Then spend two-hours watching Subaru magic versus getting my work done. Thank you?

[@Smeedia]

Lol your welcome? 😅 What music selection you pick? Now I gotta know 👀👀

[@natanaelonate5193]

Best series on youtube right now👀

[@Smeedia]

🙏🙏🙏🙏

[@DJ_Driven]

First time I've seen an HKS 💜 timing belt used on a EJ. About time now you need a matching belt for the Evo!

[@Smeedia]

Never used em before, give it a try and see how it does 🤝

[@grantschooling2911]

All those dream parts gives me so much excitement being hatch owner I’m actually fan girling this build

[@kt-_-2323]

Fr, I got a sedan though 👐🏻

[@Smeedia]

Been wanting to do a hatch for a little while now. Excited to build this one 🔥

[@AzraelGG_]

Man. I love all your videos but as a 09 wrx owner I absolutely love this series and how this thing does will definitely determine my next step (FBO, stock turbo 1050id)

[@Smeedia]

Ohhhhh any idea what your end goal for the car is? 🥳

[@AzraelGG_]

@@Smeedia Just a fun 450hp

[@nissan1580sx]

Loving this build up of the hatch. Can't wait to see this one running

[@Smeedia]

She going to be a wild one when done 🥳

[@codykellner9985]

Looking good!!...hatch is coming along quick...I think I am going to finally start modding my 18 wrx!!

[@Smeedia]

Whatcha thinking for mods?! 😁

[@paulmarsdensr1095]

Hell yeah way to clean up that front bumper and it looks good 😂. A nice front mount intercooler.

[@Smeedia]

Front mount always adds a nice touch 💪

[@paulmarsdensr1095]

@@Smeedia I see. Looking good. Great content brother as always.

[@reigningwrx8665]

loving all the new content! I can't wait to see what this hatch can do. and i'm so looking forward to seeing the Blubaru get tuned.

[@Smeedia]

Dude same, I cannot wait to see what the hatch will put down 🥳🤝

[@jessefontana7027]

The piece that hits the turbo inlet is actually the stock boost control solenoid. So if you are putting on a 3 port ebcs, that piece will go bye bye. I modified the bracket for my grimmspeed ebcs to sit nicely on top of that plate so it is completely out of the way. Let me know if you want to see my setup for reference. Loving this build!

[@Smeedia]

Perfect 💪 have my 3 port going on so can clean that up then

[@Mr_jz_12]

4:30 Beard oil mate after a good scrub of face.

[@Smeedia]

Might have to snag some more 🤝

[@jdm_jord0391]

It’s 4:30Am and still clicked on this as quickly as possible 😅🤣

[@Smeedia]

You living in the future 😳

[@jdm_jord0391]

@@Smeedia some future facts 😅 Subarus are still fun to play around with! AND! KZbin memberships are still annoying… 😅 spent 20 min trying to resume my membership with you 🤣 ITS NOT WORKING! 🤣

[@Smeedia]

KZbin breaking our balls again 🥲

[@westonmickey3890]

Tanner is the Greek God of Subaru hatches.. God bless this Titan.

[@Smeedia]

❤️❤️❤️

[@T_Wiser42]

Absolutely killing it with the GR content, I would love to see you do the 15+ steering rack upgrade followed up with a how to install video, I have my 15+ rack sitting in my garage, contemplating tackling it myself.

[@Smeedia]

Coming soon, should have one headed out way in a week or so 💪

[@T_Wiser42]

@@Smeedia Absolutely killing it man.

[@dohcbag]

very excited for how this is coming along, but i must say my ACT throw out bearing lasted maybe 8k miles before squeaking like crazy

[@Smeedia]

So far I haven't had any issues with the act bearings 🤝 but your not the first I've heard this from

[@kevinbean9380]

Good shit... had to trim a little off my turbo. FP green HTZ was not a direct fit lol. luckily the compressor housing is THICCCC AF. FP said go ahead and trim that it wouldnt void the turbo warranty. Ur rex will be done before mine lol. mine has only been gone since december =(.... side note. i have the same blanket and the spring is a no go. let me know if it fits ur turbo with the spring. i know diff turbo but still interested plz.

[@Smeedia]

Surprisingly enough it does fit, it's for 20G and IHI turbos. They use to be bigger but looks like Cobb trimmed them down. Little

[@kevinbean9380]

@@Smeedia Gotcha... wish FP noted that i had to trim the housing. would have bought a diff turbo.

[@Smeedia]

Odd that you have to trim it, my FP black bolted right up 🤔

[@kevinbean9380]

@@Smeedia Yeah... cant find info anywhere stating it. got the turbo in and it was making contact with the block. called FP and they said its not uncommon lol. trimmed a little to make it sit flush. they said other have added a bigger gasket to give it the room.

[@josemendivil9174]

watching these vids very very closely to see what green speed compliant parts i can do to my hatch out here in shit cali

[@Smeedia]

We gling to do what we can 🤝

[@DarkInstinct05]

Oooooo oooooooo, perfect day to drop another vid as I'm changing the front bearings plus rear pads + rotors.

[@DarkInstinct05]

I really don't like the clutch fork and pivot ball assembly on these cars.. my fork failed when I bought the car and was a PITA to remove. Just go to the 6sp before building a 5sp, it's not just the gears and the DCCD that you're upgrading. It's also the little things like changing to a dowel pin for the fork.

[@Smeedia]

@@DarkInstinct05 big facts, that's why if the 5 speed gives us any troubles, it's coming out

[@scoobysouth]

Nice update.. Lots of goodies.. GL with getting it going and tuned... :)

[@Smeedia]

Thank you 🥳🥳🥳

[@Nultic]

Issue I had with putting my STi engine back in was the dowels on my IAG block were too big for my transmission so I had to drill out the trans dowel holes a little bit. Never had that issue before.

[@Smeedia]

Can't say I've ever seen that before 😳

[@Addmoreboost]

Yoooooo, chill with that ‘stache, Adolf!

[@Smeedia]

🥲

[@wilsonkasunga3358]

My dude I'm loving the content. EG Moon tune waiting

[@Smeedia]

Soon my friend ❤️

[@vvv7876]

Where do you recommend looking to buy a 6 speed for the hatch.

[@Smeedia]

Facebook, ebay, offer up 🤝

[@ginoromano5667]

I disconnected the oil cooler part it definitely drops or a pressure. Like a lot

[@Smeedia]

Might not use that part 😅

[@TheLineCrusherPVC]

Still no tail light over lays? Smh get those done! I love the hatchbacks but the clear 90’s style tail lights are the worst. Either way all the other mods are 110% more important!!! Keep up the killer work!!!

[@Smeedia]

I knowwwww I still need to 🥲 just been focused on the engine stuff right meow lol 😆

[@jaymian324]

You make it look so easy. Hope she holds together.

[@Smeedia]

We shall find out what happens 😅😅😅

[@cd5sircoupe]

C'mon Tanner, you just gotta mind over matter the itchy beard. I can't even remember when mine was in that phase... it's been goin on 2 years at this point.

[@Smeedia]

Dude it gets so bad 🤣🤣

[@paulkorobkov3658]

Beard Oil and Shampoo you don't even notice it after that.

[@cd5sircoupe]

@@paulkorobkov3658 Amen

[@justdecoma9096]

Can you explain in a video how to wire in afr to ecu for tuning on 15+ sti

[@Smeedia]

I got you, not tomorrow's video but in the next one 🤝

[@kurndugaillard7663]

@smeedia lets service the transmission and differential with that redline cocktail this should help prolong the life of it and withstand some of the added power

[@Smeedia]

Going to guve this a try 🤝

[@newguynasti2008]

Don't have a hatch yet but learning from the best for when I do. Hard to find a nice 1 that don't cost arm and leg or my first born lol.

[@Smeedia]

Hatches are insane in price, absolutely blows my mind

[@DavidLee-oh3ln]

If ur still looking for a forester xt to build there one in my area that would be good for you in my area.

[@Smeedia]

If I had the funds at the moment I'd snag it 🥲

[@DavidLee-oh3ln]

Just figured I would let you know cause that’s the one car you love to talk about

[@DavidLee-oh3ln]

Just figured I would let you know cause that’s the one car you love to talk about

[@BoostedBrando]

Link to Tool you use for seals? Is it company 23?

[@Smeedia]

Company 23 🙏 their website linked in the description 🥳

[@BoostedBrando]

@@Smeedia Thanks, You’ve been so helpful over the last year with all the questions I’ve had, thank you! You need to get a discount with Comp23 lol I ordered the flywheel hold , intake and exhaust covers. Thanks 🙏🏼

[@ranran2218]

Hey tanner I wanted your opinion on a older subaru. Buddy is selling his 2008 subaru impreza 2.5i hatchback na. Chasis had 165k miles and the engine he had rebuilt and upgraded from a shop in Cali to handle a bit more power but he hasn't modified it beyond aftermarket exhaust and wheels. The new engine has 3k miles on it. He just imported a Mitsubishi legnum 25st-r and doesn't need it. Is 8k a fair price for the subaru?

[@Smeedia]

8K is a bit much IMO I personally wouldent pay more like like 4.5K one

[@ShaunRGardner]

You need to pull the motor on Subarus to remove the transmission?

[@scottsyverson8912]

interested to see what you do with the evap hitting the inlet pipe. Eyes are glued man!!

[@Smeedia]

Easy to move it, just have to unbolt it and put it elsewhere 💪

[@scottsyverson8912]

Copy that

[@do_italldayeveryday820]

Amazing love everything you doing with the hatchback!!!!

[@Smeedia]

Thank you 🥳 this is only the beginning 🤝

[@natecrx88]

Would love to watch an fa20 build as in depth as this has been

[@Smeedia]

Maybe one day 🤝

[@foxunfocused]

Ready to see some chooch on that WRX! I hope this block/transmission holds together for at least a month haha

[@Smeedia]

I think we can make it last that long 😅

[@asions]

Random question you said 400-450 whp the stock pistons and rods are capable of that? I have a 2011 STI I was gonna swap internals but I don't really wanna is it capable of 400-450 with just resealing the engine? Ive only read old forums about it

[@bryanr93]

400 is pushing it on the stock internals. He knows he’s going to blow the engine, he’s just looking for an excuse to build it. He’s basically showing everyone what a stock WRX block and transmission can do before he turns it into a better STi. If you want your car to be reliable and not implode, you’ll have to build the engine (and get a 6 speed trans) if you want 450HP. If you tune it to 310-340 then you can keep it stock.

[@Smeedia]

As said, I wouldent push a wrx past like 350whp if you want it to last. I'm going to 100% blow mine up. If you want testable power you will ,have to build your engine. Only reason I resealed it was to make sure we had no leaks

[@asions]

@@bryanr93 I appreciate the input I finished tearing down the motor the top part of my piston is gone so looks like forged goodies for me lol

[@06wrxdude]

Bummed this video had to end! Loving every minute! 😎😎

[@Smeedia]

Always more to come 🥳

[@ryanleva4264]

Yo tanner your posts are like an above par gym motivation genie of the boxer lamp. Thank you for the videos and motivation good sir. All topgun high-five to the idoing vid.

[@Smeedia]

Eyyyyy thank you Ryan! Glad to hear I can help spread a little motivation out there 🔥

[@AZZY_1220]

excited to see this thing hopfully not blow up!

[@Smeedia]

Lol same 🥲😅

[@AZZY_1220]

@@Smeedia it’s built by you, it will be good lol

[@Smeedia]

@@AZZY_1220 still a stock block and stock trans 😅

[@AZZY_1220]

@@Smeedia oh boy lmao ig we will see

[@azureander5487]

I can't WAIT to see the dyno numbers on the 6 cylinder and see some real full send pulls on video

[@Smeedia]

Same 🤭🤝

[@memphis550]

Another great video. Inspiration for the build I’m currently doing.

[@Smeedia]

Eyyyy how's the build going? 🤝

[@memphis550]

@@Smeedia great just waiting for the turbo from hill country forced injections. Engine out beadwork done lots of new parts this week the mishimoto radiator and fan and oil cooler going in. Everyone talks trash about mishimoto what’s your thoughts?

[@Smeedia]

I would have to agree with everyone... mishimoto had only ever done me dirty 😅

[@memphis550]

@@Smeedia like the 5 speed I’ll run it till I need to change it. That’s unfortunate

[@AmirPomen]

Use 4quart of redline shockproof lightweight trans fluid on that 5speed... Literally the synchro becomes bombproof... The only reason my speed need to comes out soon is because input shaft seal were leaking... And i have another 5speed ready with fresh seal to go in... Cheers...

[@Smeedia]

Ohhhhh lemme know how you like those gears in the 5 speed!

[@AmirPomen]

@@Smeedia less shift required on street/strip pull.... I managed to get 4.46sec 0-60mph launch... 😹😹😹 Because i just need to shift from 1st into 2nd... On 6speed u need get into 3rd...cheers.. But apart from that 1 aspect... 6speed were always better in every way

[@bash5552]

RCM Steel (not stock plastic) lower cam gears ftw! very nice!

[@bash5552]

And I will def be picking up that 3MI hose, seems so obvious now! Micah is the man!

[@Smeedia]

Both that hose and cam gears are so worth it 🔥🔥🔥

[@ericlanam4265]

Curious about the idle.speed.on the Blubaru... It sounded fast. I just got a JDM EJ205 installed in my car, and we haven't gotten the idle.to calm down -- 2000+ rpm is a bit much. Enjoying the builds muchky. 👍

[@Smeedia]

Idle after cold start is about 1000 RPM 🤝 cold starts are around 2300 or so

[@PandaSubie]

Nice to meet you tanner, live the content you put out. Looking forward to the next meet. I'll hit you up on your IG with a few questions.

[@Smeedia]

🤝🤝🤝🤝

[@william-ezekielverduzco5163]

Where does one find a six speed and all the stuff needed to complete the upgrade?

[@Smeedia]

Ebay, offer up, FB market place 🤝🙏 Flat iorn tuning sells some kits

[@PleadTheFifth_Racing]

Totally off topic for your video but I have a serious question/problem. My new top tier closed deck, pinned mains, billet crank, built heads engine from Outfront lost all oil pressure at the track suddenly. Has a new Killer B oil pan and pick-up, 11mm pump from Outfront. I've had zero oiling issues and keep an AEM gauge in the car for pressure and temp. Was 1st pass of my 1st race, hit the rev limiter in 3rd and dropped the clutch hard on a flat foot shift in 4th. That's when the oil light came on and the AEM gauge read zero. Pulled turbo oil feed line in the pits and nothing. Motor has 1500 break-in/tune miles on it, making just over 900whp at 43psi through a 6870, rev limiter set to 8300 so nothing super crazy for this motor. Most likley cause I think would be the oil pump pressure relief valve but I'm not sure it has the capacity to bypass 100% of the oil pressure the pump generates. Could also be that the pick-up snapped off but that would be wild, same goes for the pump keyways shearing off.... Any insight would be greatly appreciated, super expensive motor and I'm pretty confident it will need a refresh at a minimum after 8k rpms and no oil pressure. Worst case the billet crank and heads are also smoked from oil starvation.

[@Smeedia]

Fuuuuuck, sorry to hear. I'd definitely start with the oil pump and work my way in. I haven't seen a killer B pick it snap before but anything could be possible I guess. If it were me I'd tear the pump down tk start with, pull the pan and check the pick it. It's rare to see but excess sealant is always a possibility on the pan. Some squeeze out can fall in the pan and clog the pick up too

[@PleadTheFifth_Racing]

@@Smeedia All great feedback, thank you Tanner. Vince Griffin said they had a oil pump pressure valve stick in the Eggplant race car and it ended up being fine after swapping pumps. But losing all OP at 8k definitely not gonna be good on the cam journals, crank and rod bearings.

[@yamilmelendez2667]

Brooooo I wish I could work my car with the same confidence u are 😂😂 man cause I wish to do all the timing change and put some new head gaskets 😭😭😭😭

[@Smeedia]

Only one way to build that confidence! 💪

[@yamilmelendez2667]

@@Smeedia 😂😂 for sure but I’m gonna need another car for sure cause I got an outback but its cause mu old man lend it to me while I finish my Bugeye once I turn it it shes going back to my Dad

[@j_zales1390]

Hell yea thats the radiator ive been thinking about getting i would love to know how it performs and if there is any problems with oil pressure like people say I have an sti oil pump on my wrx so maybe pressure wont be a problem but would love to see a video on it from a builders point of view so i can make my decision on that one or just a bigger CSF rad

[@Smeedia]

Seems like the general consensus is they drop like 20PSI, don't think I'm going to hook it up 😅

[@followtheornghat]

Woohoo! Looking good buddy. Now if only that turbo was Carb approved I'd be all over it.

[@Smeedia]

I belive its a comparable turbo to the Cobb 20G for power 🤔

[@followtheornghat]

@@Smeedia little more by those numbers. I don't hear about Cobb 20gs maxing at 480

[@joshanderson1122]

Always the high point of my day keep working. That front mount is big and sexy

[@Smeedia]

Front mount is a thick unit 🔥

[@Nick_Spencer]

Considering the subaru density in this comment section I'm hoping someone knows this. does anyone know why my 6 speed fluid kinda looks like its getting water in it? is there a seal for the speed sensor? I've replaced the fluid a few times in the last six months and it still seems a smidge milkshake like, not a lot though. I'm using motul fluid each time. Thanks for your time!

[@Smeedia]

What year? And STI or FA20 WRX (Also 6 speed)

[@algeorges502]

@Smeedia gonna be doing a lot of work soon, just waiting for labor-day sales, and wanted to get your thoughts/input. I'm no idiot, but I'm no where close to a master at this stuff...doing it all in the garage. SouthBend stg 3 daily VS. ACT HDSS VS. competition clutch (?any?) - - - do you have any recommendations and why? TiC recommended S.B. (and I trust them) My tuner recommended ACT (and i trust him), and you mentioned competition (and i trust you)..... -Group N full mounts going in (eng/trans/diff/pitch stop) -Whiteline 22mm F/R sway bar + bushing kit -additionally, clutch fork, pivot ball, and clutch line are all getting upgraded with the clutch

[@Smeedia]

HDSS > South bend >competition ACT is the best feeling clutch imo that holds power well. Competition feels like hot trash IMO personally never been a fan of South bend clutches for subarus. The only reason I have a competition is because the flywheel on the car only works eith this competition clutch. Otherwise I'd be using my act hdss. Other mods all sound on point 🤝

[@algeorges502]

@@Smeedia awesome! Thanks for the input. I love the forums and all, but don't want to get misled by too strong opinions and otherwise unsound/unexperienced advice of NASIOC trolls...lol

[@westonmickey3890]

You have the same Cobb turbo inlet that I do

[@Smeedia]

Eyyyy gang gang

[@tunnel3024]

Any plans on adding an external oil cooler?

[@paulkorobkov3658]

The bottom half of his new CSF radiator has it built in just has to plumb in the lines to it. I've seen this on trucks but not reg cars.

[@Smeedia]

Going to try the caf oil cooler that's built into the radiator 🤝

[@SuperPete276]

I think I heard you saying before that you don't believe in 4th cylinder cooling mods

[@Smeedia]

6 cylinders they're a no no, 4 cylinders I don't care to have them kr to not have them

[@oscartavares9797]

Why not the OEM throw out? I have the ACT throw out and after a year it starting to make lots of noise. I'm going back to OEM hopefully that fixes the chatter.

[@Smeedia]

I already had an ACT one sitting around, did not wanna buy another 😅

[@omialmanza1900]

Id say, its gonna be a quick (racecar) daily 🤫. Its always a blast to see the progress on your cars T!

[@Smeedia]

Eyyy thanks Omi! Fun to be able to rip into these things 🔥

[@cww-tv3267]

When I put my engine back in for the first time I thought it would take me long sense I was by myself but nope 20-30 mins done

[@Smeedia]

They go quick when tossing em back in 🤝🔥

[@josephbreen9955]

Great video I have to do my head gaskets on my 04 WRX

[@Smeedia]

Shouldent be too bad to knock out 🥳 leaking I'm guessing?

[@joshstane5926]

When you finally got the blue subie together, were you scared to get it tuned? Although I trust my tuner wholeheartedly, it's so nerve racking!

[@Smeedia]

We're only on a break I tune right now but always scared with that thing 😅😅😅

[@CHASEtheDRIVE.]

Does the haltech display on blue have knock learn and feedback knock like the ap? Or do you occasionally log and just trust the tune?

[@Smeedia]

I don't even look at them tbh but I can set it up if I wanted to 🤝

[@BoostedBrando]

How necessary is the company23 timing tool needed? And same for the one I saw used to keep flywheel in place. I’ll be doing this process pretty soon.

[@Smeedia]

It's not 1000000% Needed, BUT it will 100% make your life better

[@dullahan7677]

Just out of curiosity, is there any technical reason that you chose the Grimmspeed BB turbo over the Precision BB stock location Subaru turbo? I remember that you opted for Precision Turbo for the EG33 build, and with both the Grimmspeed and Precision Subaru offerings being similarly priced, I kinda expected that you might've stayed with the brand. I'm currently in the research phase of my own build and leaning toward the Precision 58mm stock location variant, but am willing to revise this plan if the Grimmspeed is the better option.

[@kyleSTI]

I thought you said you’re not doing the cylinder cooling mod anymore

[@Smeedia]

4 cylinder I'm okay with them 6 cylinder is a no go for them

[@westonmickey3890]

I can assure you that the CFS radiator is top-notch and you're not going to have any kind of oiling issues..

[@Smeedia]

🤞🤞🤞

[@joshuawilliams46]

No more surprises!!! A nail in the bumper is a new one for me. 🤣🤣

[@Smeedia]

Never seen that before 💀

[@zanerclark]

What happened to ditching cylinder 4 cooling mods

[@Smeedia]

4 cylinder I have no issues with em 6 cylinders it's a no no

[@Scoob_Heartwood]

@smeedia how's your cobb turbo inlet fitment? Mine keeps walking off the turbo every like 2 days from hitting boost. 😒 I have my hose clamp so tight I keep stripping them :( I've noticed the inlet doesn't completely slip all the way over the turbo so I'm guessing that's the main problem..it's a thicc boi.

[@Smeedia]

So far it lines up, I've never used it before so I will have to report back

[@Himnothingmore]

Link for the cam seal tool?

[@Smeedia]

Link to company 23s website in the video description 🙏

[@tomasromero2054]

Is that an exhaust outlet on the side of the car???? That blue STI nasty!!!! How’d you route that! Wanna do this on my 08 WRX

[@Smeedia]

Yes it is 🤝 Look at some of the older videos, it's a H6 Swap with a head light turbo kit

[@byronlara6106]

Very excited for this build

[@Smeedia]

She going to be a little party hatch

[@stefanvanbraam4378]

I know what your taking about with dust. Just opened my hood from my 2011 wrx and I live in Las Vegas. Just a sand box under the hood

[@Smeedia]

Dude I can only imagine, shit gets EVERYWHERE

[@thebrenthatfield]

So cyl 4 cooling mod? Where do we stand with that? Last I heard, you said it may not be a thing? Can you talk more about that situation? More question marks?

[@Smeedia]

4 cylinder I'm fine with them 6 cylinder not good with them

[@Scoob_Heartwood]

You can make good reliable power on the stock block. It's all about building it RIGHT, not skimping on quality parts, and a good tune. 😁🙉

[@Smeedia]

We have quality and a good tuner so let's see what happens 😅

[@hatefunwrx]

Not gonna lie I'm really interested/curious about a more indepth view on the blast plates for the 5 speed

[@Smeedia]

Saving those for their own dedicated video soon to come 🤝

[@hatefunwrx]

@@Smeedia sweet

[@ohgryph]

I love this, it’s literally “What If?” with what could become of my hatch 😆 🤔

[@Smeedia]

So many possibilities 🤭

[@traviswilson4413]

Drove bye your house today cars looking good man 🤘🏼

[@Smeedia]

Creepin 😅😅