THIS BLOWS!! Cobra's NEW WHEELS & TIRES are TERRIBLE!!

[@DerekBaranProductions]

What should I do? Leave suggestions & *WATCH YESTERDAY’S VIDEO!* kzbin.info/www/bejne/Y4vKh5WnbJ2Soas

[@stevenlooney6053]

My 01 I have staggered bullitt wheels that are 17s with 305x35r17s an my setup definitely doesn't have that much gap or at least doesn't look like that. Idk if it's a difference in cobra an gt an Irs an solid axle or not either tho

[@Cappy-bf5rz]

If you get a fatter sidewall in the rear the cobra should look alright besides the function of gapping some newer cars will make you forget about the way it looks besides you can't see the wheels when you're

[@stang5599]

I had use spacers an I also did 11 an half wide Cobra rep wheels in back

[@stang5599]

17x11 an half

[@cousineddie3302]

Hey derek you ever figure out which way that spacer went in? I ran into this issue today. The bevel go in or out? Lol

[@kckemp03]

Hey Derek!! I don’t think it looks that bad! Maybe for the rear get a bigger side profile/aspect ratio?!? Like a 40 ?! Should close that gap a bit!! They look good imo!

[@maicoldfarfan4139]

The 315/35/17 will definitely give you a gap usually the rear tires goes smaller on side wall cuz the car is dropped more so they do that to not rub but I’m sure if you put a meatier tires on the rear it will clear that gap definitely a 45 or 50 side wall would do

[@midnight347]

315/35 is the exact same height as stock 275/40 and stock gt and Mach 245/45 size. The aspect ratio is a lower number but the width is a much higher number so it evens out at the same height overall height and sidewall.

[@JosephTurner96]

The rear tire size is fine. The problem is the big 275/40s up front. Go with a 255/40 to get more of a raked look. Also the reason the rear looks smaller than the front is because you have the deep dish rear and stock fronts. The spokes of the wheel are more set in almost giving the illusion that the wheel is smaller. Running a 315/40 or 45 on the rear is gonna look ridiculous and probably rub your fenders if they aren’t rolled. I would change the fronts and lower the car a little more. I recommend h&r supersports or coilovers to dial it right where you want it

[@jonathannoe4100]

I had the same wheels on my 04 Terminator. Had a 275 front tire and 335 rear. Absolutely loved the stance! I have missed that car everyday since I sold it.

[@jmendozas197]

Yeah, I think the stockies look better. The new rears don’t look aggressive @ all.

[@midnight347]

It's not low enough and the deep dish looks like trash on terminator style wheels. Regular stock style 10.5 inch rears look much better.

[@guitarsandcars2586]

@@midnight347 the deep dish wheels don't look bad at all on these cars. All my mustangs always have 17x8 at the front with 17x9s at the back, gives them a really good look especially if the tires are Mickey Thompson's at the back. Regular dish all the way around just doesn't look good and deep dish all the way around just looks retarded.

[@dandookie1738]

Don’t forget to mention the KMJ alternators have lifetime warranties!!

[@kmjmotorsports]

That's right!

[@DerekBaranProductions]

Even better!!

[@kassmcginnis1918]

@DerekBaranProductions 40 is a taller tire which closes the gap more cause obv the rear is now a 35 sidewall which is smaller, i love the way it looks but i agree with you on the weird look. I say just swap the tire's with a 40 sidewall and it will look just right, btw on blueifer are you running the 19x10/19x11 SVE R355 setup? thanks in advance. Great video as always.

[@midnight347]

315/35 is NOT shorter than 275/40 they are the same height same sidewall just wider that is a proven staggered combo on sn95 mustangs since before some of yall were born lol. It's amazing how many people don't understand how tire sizing works smh

[@95Sn95]

I personally love cobra wheels, I have a 95 GT convertible and even tho it had the 5 soft spoke best looking OEM wheels but that's not saying much but I found some decent knock off 95 Cobra R 18x9 chrome wheels I bought 265/35 tires and I also put 1.5" spacers in the rear and 1" spacers on the front and wow total transformation! It looks so badass. Unfortunately I hit a pothole and put a flat spot in the front rim, 35s are not ideal in maine but they look so nice, so I need a rim but after seeing it with these 18x9s I really want a couple 18x10 with the dish for the rears, any tire starting with a 3 are pretty pricey but looking I see a 285/30 pretty affordable. Seems there's waaaay more tire choices for 17" for some reason but I so love the look of 18s. Black rims are the in finish these days and I've seen some dropped murdered out ones with black wheels look pretty sick but i personally don't really care for the black wheel look and Lazer red, white top with those chrome cobra 18s sparkling in the sun looks pretty sexy imo.

[@VidTubeWatch]

It really doesn't look bad, but I feel your pain. Those rear tires that came with the new rims don't have a lot of life left like you said. Just buy a set of taller tires sooner or later depending on how long you can live with the current set up. I don't know the size of your original rims compared to the new ones, but would the original tires work on the new rims?

[@jasona4473]

You need to go 18s. Any deep dish wheel should be 18s or 19s. 17s only look good if your slammed. I have 18” AFS Cobra Reps (check profile pic) and they sit just perfect. A great 18” deep dish wheel is Cosmis XT005R and they look nice on these cars.

[@DerekBaranProductions]

Wish i could find those

[@ccampaaz2867]

AFS 18x9/10.5 look great on these cars, but you just can’t beat the look of a nice set of 3pc wheels. I sold my AFS wheels years ago ( when they cost $950) thinking that I would retreat it, but that wasn’t the case. Go with 18s and you’ll be amazed by how much better the car looks.

[@miguelmarin4445]

I have 18’s what were the tires specs u were running?

[@2003cobramustang]

Still can’t get over how shiny the original paint is outstanding! Thank god for Joel! If you lower the back will it look better? I think it will!

[@DerekBaranProductions]

He came in clutch forsure!!!

[@adrianandrewsjr.1576]

Taller rear for sure maybe throw an inch spacer on it too. Maybe lower it just a notch but its definitely not horrible. In my opinion, I like the chrome better though, give s it more of a cruiser look. You should throw some LED side markers on it too bro

[@DerekBaranProductions]

Yeah ima see what i can figure out

[@Coyote9smilespergallon]

Damn that alternator KMJ killed it! I’d like one for my 10GT500

[@kmjmotorsports]

Thanks! Can you even see it on the GT500's? If you want one get with me!!

[@DerekBaranProductions]

They are fire!!

[@Coyote9smilespergallon]

@@kmjmotorsports it’s a lil hard but if you use an ice tank and remove the front tank it’s rite there when you look down.

[@TheModAddict]

Kmj is a awesome company. Awesome people there.

[@kmjmotorsports]

Thank you sir!

[@DerekBaranProductions]

Oh yeah!

[@Joemauma_]

looks good man. I think it would look better with the matching fronts and it definitely needs a taller tire in the rear, but it looks better than stock for sure

[@DerekBaranProductions]

Yeah bigger tore definitrly

[@Wretched2JZ]

You should have went with the 18” AFS replica wheels like on my car! They are the “right look” for a better than oem look. And my fenders aren’t rolled either, check out the fitment 👍. And my terminator isn’t a maintenance queen lol🙈

[@kennyp8302]

I agree and I can also respect trying to kept the car original as possible but if ya gana switch up factory wheels then the 18s will not only look amazing but help with the wheel gap..

[@AwesomeFinish]

They are impossible to get right now and people want too much for a used set. I like them too but not for 2k +

[@gregharper7316]

I have the same set up he just threw on Medusa and would absolutely do AFS replica's too, IF I could find them...

[@ccampaaz2867]

CCWs > AFS

[@guitarsandcars2586]

18 in are too big my dude 17s are like the perfect ones without making it look gangster.

[@ExpoPerformence]

40-50 side wall would fill the tire gap so 315/45/17 315/40/17 315/40/17 I’d start there or get a 30 side wall in the front but then you’ll have major gap

[@midnight347]

They don't make very many tires in those sizes if any at all. A 315/45 would be HUGE like a 28 inch tire at least idk the math right off but it's way taller. They come stock with 275/40 which is the exact same height as 315/35. 275/40 and 315/35 is a proven staggered combo for 17s on these cars they're the same height just wider on the rear.

[@averycoolturtle]

Remove the isos in front and rear, I'm running H&R race springs with no isos and the gap is perfect and then if you still don't like the side wall difference, go to a 255 40 17 and the front sidewall will be slightly smaller and will give you a little bit more of a raked look

[@DerekBaranProductions]

Ohhhh okay okay good deal

[@riceetr1260]

The car will settle down a little more once you go for a drive. Make sure the spring isolators are out of there. You don’t need them. I’m running H&R race springs on my cobra without isolators and it sits lower.

[@Theguys1212]

I absolutely love those wheels, in fact I have always said I would do that same wheel setup on my 03/04 Cobra if I ever got one. I hopefully will be adding one to my garage with my Shelby in a year or 2…

[@itsKeMonte]

6:28 A spare stock what? 😂🤣🤣🤣

[@Coyote9smilespergallon]

That Black Termi is The One to have! 04 Termi black with the Dark seats and a whipple and the chrome wheel set up is perfect to me!

[@DerekBaranProductions]

Ayeeee

[@KyleSVT]

Full Tilt has come out with good low profile IRS bolts that have a stock style head on it. Can't link them here. If you are not happy with your stock ground down bolts they are $20

[@DerekBaranProductions]

Definitely want a set of those!

[@atlas1122_]

I totally understand what you mean by the weird look of the rear tires, they're definitely to small, probably best to upsize the rear tire, orrr downsize the fronts to a 35 sidewall, either should make it look better. But with smaller tires you probably wanna lower it more. Either or bro they look clean I'm glad you're going with a purist look on the cobra it's gonna look perfect when you dial it in!!

[@midnight347]

315/35 is the same height as 275/40. Idk why people think it's shorter because it has a 35 aspect ratio. I don't think most people understand how tire sizes work lol.

[@atlas1122_]

@@midnight347 the problem is the rear looks to small. Doesn't matter if they're the same size height

[@5.0joe88]

Loving the cobra..I’m a purest when it comes to stangs..but saw a 03/04 cobra in my town rocking 2020 GT500 Shelby fender badges on there’s..and wow!!!!looked like it belonged on there..there a tiny bit bigger then the stock cobra’s on the fenders and new appearance of them would look sick on your ride..food for thought😃

[@justinfenning2402]

The 18” set would definitely look better in my opinion but try a 40 sidewall if you’re going to keep them. Sounds like a very small difference but you will definitely see a difference. My 03 mach1 had 35 sidewalls and my buddys 04 gt had 40 and it was a huge difference looking at em next to eachother. And if that wheel gap still doesn’t go away maybe try take out the rear spring isolators and just wrap the top and bottom of the springs with electrical tape to ensure no creaky noises. That should give u maybe a quarter to half an inch too.

[@justinfenning2402]

Not to say that the 17’s look bad by any means because they don’t, I totally love that you are keeping it like oem plus.

[@DerekBaranProductions]

Yeah that was my next step

[@tobroke2007]

I kinda did the same thing you did to my Challenger I had 315/35/20 wheel gap was hideous even with eiboch sport line lowering springs I ended up going with 305/40/20 made a huge difference with a taller side wall.

[@midnight347]

They don't make a 315/40 in 17 inch size 315/35 is same height as stock 275/40 he just needs to lower the car more.

[@DerekBaranProductions]

Oh nice!!

[@tobroke2007]

@@midnight347 ya the 315 was what I said was on my Challenger rt he may need to go with a 275/40/17 I know Nitto makes that size but not sure on a 305/40/17

[@tobroke2007]

@@midnight347 they do make a 305/45/17 though which is probably what he needs to fill all that well gap.

[@paulciprus9582]

I did H&R reds…and 25 mm spacers in the back..which by the way gets rid of any wheel hop…the wheels are original Ford Racing FR500 wheels…which went out of production in 2008..nice Cobra…keep up the good work…😀😀

[@shapeshifter6982]

Looks decent but never was a fan of the deep dish cobra wheel. A stock style 10.5 wheel would be my vote. Perhaps a tad more drop in the rear and installing the matching fronts would look ok in the meantime.

[@DerekBaranProductions]

Yeah thats the style i originally wanted

[@mikel4801]

I am surprised you went with a deep dish in the back. Imo deep dish wheels themselves look way smaller than a normal wheel. If you want a stock look I would do the 18" afs chrome cobra wheels. You can still get a 315 or 335 r888.

[@DerekBaranProductions]

Yeah i might look around for some different ones

[@chasebrown7130]

What i would do is just drive to a tire&rim store have a store employee take a couple different size wheels from 17-20 inches with different widths and offsets to see how it will fit the car before spending the money most shops are happy to help or atleeast guide you in thenright direction you gotta take the initial ride height into account if you havent lowered the springs i did my wheels rims lowering springs control arms new bushings & bearings new rotors & brakes new calipers new sway bar all at once to save time & cost of labor its a completely different car now but more work to be done

[@gregharper7316]

I bought SVT center caps on ebay for $100 and they fit in perfect with my LMR aftermarket staggered wheels (same as you just got)... BUT, my car came with CCW's, so im assuming the previous owner shaved that bolt down and/or replaced the center cap bolt bolt to help the caps fit. Thats probably what happened.

[@DerekBaranProductions]

Ahhhh okay

[@md-oz8te]

those wheels look fire i don’t know what your talkin abt

[@oncewas37]

Let the rear suspension settle by driving it when you jacked it up with park brake on it extended your rear shocks now just need to drive it to settle back down looks great though ( needs bagged )

[@DerekBaranProductions]

Oh trueee

[@billypike3797]

I run the same size setup with some 10th anniversary reps. Definitely not that much wheel gap in the rear. Maybe mins a little lower

[@jpsantone]

I never ran low profile IRS bolts or shaved mine down. That interference your seeing is only when the car is off the ground. When it’s on the ground there is tons of room. I never had an issue running 315s on 10.5 wheels.

[@williamking9200]

Welcome to my current world, seems like everytime I do a upgrade to my New Edge that I think is cool something has to go wrong and either look horrible or not fit right, I'm so exhausted and annoyed I'm taking a few months break then regroup on solutions...

[@DerekBaranProductions]

It happens!

[@user-kt8ee1jg7e]

You can sale the ones you just got and get the replica in 18s and just go with beefier wider tire in back. They come in offset for the 18s. The back wheel is 18x10. The 18s will fill up the fender gap.

[@Wretched2JZ]

Yea if the fitment on those wheels is for a straight axle and not IRS it won’t be pushed out enough. It looks pretty good tho atleast. You want a 305 or 315 / 35 / 18. Front 275/ 35/18

[@emilioluna8189]

honestly i love the deep dish over the stocks however you either need a larger side profile on the tires or lower it more

[@ericblais53]

Bro. It’s a point of perspective…if you ran larger spacers on those originals you had in the back, you’d see the same gap. I think, in my opinion here, enjoy it now, and when it’s right get you the coil overs you want for Medusa. OR…you could cut your springs one full coil, depending on how low you want it. THEN, still need it lowered?…cut .5 coil out of it and check that out. Good luck my brother. Good catch on those set of wheels too. OH!…one more thing: stock 245/45/17 are 25.7” tall. Those 315/35/17?…yep. Same. 25.7” tall.

[@Wretched2JZ]

I’ve never needed low profile IRS bolts.. even with 11.5” CCWS.. But it was darn close! Good wheel company’s know how to get the offset perfect where you don’t need it. But you do need rolled fenders with the 11.5s. If it doesn’t get the grinder out.

[@Nitroxdude]

I’ve got the same rear deep dish on my car , don’t even think about putting micky et street r on them they will rub the fenders and cut the tire , and yes same springs h and r race . I also want to sell mine as well . I’ve been rocking the look way too long .

[@dandookie1738]

AFS 18” reps are the way to go to keep the stock look, but 18’s look way better. Plus they have the right fitment for no spacers

[@DerekBaranProductions]

Yeah im about to look to see if i can find some

[@mtfbread5651]

I’ve been trying to get a spacer for my rear for so long. Hasn’t come back in stock, can’t wait to do it, makes the rear way more aggressive

[@DerekBaranProductions]

CJ pony has them

[@mtfbread5651]

@@DerekBaranProductions I usually go to American muscle, but I guess I should widen my search lol. Gonna look nice on the stang. Also love the Cobra, my dream ride right there.

[@ovrjit6319]

got this setup except without the larger ones in the back, but for 200 in st. pete FL

[@11B_GRUNT]

Bro I love that flat face up front and the lip in the back, but you need to run a 315/45/17 in the rear and that will fill in that wheel gap. You could probably even get away with a 305/45/17

[@DerekBaranProductions]

Trueee

[@deekbeen7419]

9:37 reliable hulk smash always coming in clutch when the mustangs are down

[@bluecollarbuilds8860]

I think the faced stock wheels up front and lipped wheels in the back look weird. I've seen a few cobra's what 315s on stocks on Google. Not sure if they ran spacers or not

[@alexchavez754]

My friend has 18x12 on his 04 cobra and it fills it in perfectly. I think he said he used to run a 325 or 335 on it

[@alexchavez754]

Also had rolled fenders

[@DerekBaranProductions]

Oh dang!!

[@alexchavez754]

@@DerekBaranProductions I believe the brand he has are American Renegade. They are the black deep dish cobra replicas.

[@jp335i]

I think it looks decent but you could try IRS bushings with less thickness to raise subframe which would reduce the gap. Just a thought.

[@DerekBaranProductions]

Yeah this IRS was rebuilt already too

[@CameronFoust]

A 40 or 45 sidewall would close that gap up pretty good! My gfs step dad runs 315/40s on his but he’s running cosmic rims so I’m not sure what inch size they are

[@midnight347]

They don't make that size in 17. 315/35 is the same height as 275/40 it's a proven staggered setup on these cars same height just wider. If he wants the wheel gap gone he needs to lower it or lower it more if it already has a minor drop. These cars sit look 4x4 stock and need tk come down.

[@CameronFoust]

@@midnight347 so your trying to tell me a 35 sidewall is the same as a 40 with the same tire brand? Correct me if I’m wrong but I don’t think it works like that.

[@DerekBaranProductions]

That sounds like it would fit nice!

[@CameronFoust]

@@DerekBaranProductions they look pretty clean I’ll try and get his tire size later today and I’ll dm it to you! And he’s running r888s as well

[@chrisa5430]

Yeah man didn't sit right, either a taller tire or a whole different set up. But I know you'll find something that works, those headlights are lookin super fresh too

[@Svt.Deonte]

I ran into a similar issue buying used wheels for my Shelby a 315/45/17 will make a world of difference🤝

[@DerekBaranProductions]

Trueeeee

[@svt_paola7094]

The r888r would look better on the stock cobra wheels but will still have the same gap you're going to need coilovers.

[@mickeygarcia2331_]

Is the windshield tinted or is it just the glare of the sun?

[@DerekBaranProductions]

Tinted

[@lewiswilsoniii6040]

Deep dish over stock, 7 days a week. Lower front 1/2 inch, up size to a 40 sidewall in the rear then go from there on fitment fam. If you still selling blue2v old drag pack hmu

[@toddmcfadden1341]

Random question, but what shift knob is this? Thanks!

[@Hawks2010champs]

Get yourself a pair of 18s black chrome rovos like blue had the black rims get the black chrome for this and slap the toyo 335 18 30 on it and it would look killer. 17s will always look too small

[@DerekBaranProductions]

I like the 17s look on newedges

[@Hawks2010champs]

@@DerekBaranProductions I mean hey, you get to do you my man. excited to see whats next for the cobra regardless! is it going to mustang week with bluesifer ?

[@jpat99]

DD Cobra's reps were never a hit for the reasons you point out. The dish made the rear wheel look smaller in diameter.

[@DerekBaranProductions]

Ahhhh maybe thats whats going on

[@jpat99]

@@DerekBaranProductions Also the tape trick was around the inner portion of the cap ring to keep is secure in the hub not the lip edge on the wheel.

[@jamiebarth1011]

They look good, just lower it.

[@terrenceprice7356]

Yeah DBP just get a bigger side wall tire for the rear like a 315 40 or a 45 r17 to close the gap cause on my coyote im running a 285 45 r19 with the same lowering spring front and rear cause as long as yopu have the side wall matching the front spec it will turn out the same look

[@deekbeen7419]

1:15-1:25 jerking the shifter count: 4

[@chrisfreimiller4878]

I used the narrow double sided tape to hold center caps

[@DerekBaranProductions]

There you go

[@digman63]

Honestly it doesn't look bad. Like the tread on the tires. I would use them. Then put the others back on.

[@DerekBaranProductions]

Yeah ima see what i can figure out

[@geeksquadproduqtionz]

I think because both front and rear are 17inches is what is affecting the look.

[@DerekBaranProductions]

This could be

[@2stangzproductions254]

I hate when I buy new items and it doesn't work out. I know you will get it figured out!!

[@DerekBaranProductions]

Just a slight delay!

[@ogsuperflygarage]

Hey Bro... I don't think it looks to bad at all... Just my opinion... Maybe get a different lowering spring set up....

[@DerekBaranProductions]

Yeah might try that

[@87bjackson]

Seen those wheels and tires on Facebook. They sold kinda quick lol Whoever wasn't asking much, but the tires were almost gone in the rear.

[@deekbeen7419]

10:55 lets go brandon still alive

[@rr122608]

I’m with you Derek! I’m not digging the wheel to fender gaps. 😬 Maybe try another tire.

[@FRED9458]

I’m with you 100. Changes the stance 4X4 look

[@Topfuel7]

I’m running a the same thing but I found out it’ll look better if you were to run like a 315/50

[@Diamondsintherubble]

If you want the sauce, get sve 19x11 and 45mm spacers. 295/40r19 are BIG BOIS

[@DerekBaranProductions]

Haha those are big

[@Diamondsintherubble]

@@DerekBaranProductions whole lotta traction 💪🏻 🤣

[@TheRealNightRyder]

I run 295’s on the back on my 04 Roush with 1 inch spacers and it’s perfect.

[@DerekBaranProductions]

Very nice!

[@TheRealNightRyder]

@@DerekBaranProductions Love the termi man, hope you get that perfect wheel setup you like!

[@jacksonroofs]

Looks good… 3 days lay tuh Gotta get them HRE or CCW’s

[@DerekBaranProductions]

I knownrightttt

[@rglce25]

It's not terrible but does look a little weird. Almost looks like you need an 18in rim or you'll have to get a more meaty tire. I can feel your frustrations. I'm sure you'll get it buttery tho

[@craigc9181]

Agree stock looks better!

[@DerekBaranProductions]

Yeah might throw them back on

[@ThatGuyBT]

Tbh i ran a 295/45/18 on 10.5 fr500 and it was the best fitment out of any of my cars!

[@DerekBaranProductions]

Oh nice!

[@CarGuyV8]

My old 04 dsg car had that exact same setup. Personally I loved it.

[@tyuspoletti]

18s are a must on these cars lol. Either that or get a taller tire on the back

[@DerekBaranProductions]

Yeah i think ima swap

[@weatherman1113]

Hit up itsjusta6 and see what he ran. His cobra was on point!

[@DerekBaranProductions]

He was on coils

[@weatherman1113]

I know you like there termys one for sale in my kneck of the woods. Only 15k miles it’s mint and loaded.

[@angelcalio5007]

On my sn95 I ran a 305 40 17 look fine filled all wheel gap

[@philthyss]

It doesn’t look bad I’d run a 40 sidewall in the rear and I’d throw the fronts on too looks a little off with the fronts not being deep dish

[@jamesfair7911]

You need a taller sidewall my guy. The rear wheel is wider then the front so that will help.

[@silentshredr]

Factory wheels look the best! Keep the factory spec wheels with a drag wheel setup to switch to

[@04oxfordwhite81]

The cobra looks good black but I’m hoping one day you do get it wrap bright Atlantic blue it would sick!!!

[@BakirNinja2012]

lol got same tires on my 98 ls1 maro but i lowered my car so the fitment is there

[@DerekBaranProductions]

Oh nice

[@Zemnexx]

Damn, I didn't think I would find someone more particular then me with my cars LOL. I think it looks good, but you know what you're gonna be happy with, do what you think is best!

[@Taino5.0]

Won’t the suspension drop after it sits for a hood bit?

[@DerekBaranProductions]

It should!

[@flumes5248]

Just cut the end of the axles flush for the center cap to fit. Doesn’t hurt anything , everyone does it with their cobra.

[@mackm1046]

Just a little taller tire on the back maybe. Looks good tho

[@midnight347]

LOWER the car more! The tire setup is as it should be 315/35 is the same height as 275/40 just wider. It just needs to be lowered more go coilovers and slam it they don't make good drop springs for cobras. Those springs are not low enough that is why you have a big gap.

[@DerekBaranProductions]

Might look into some coils!

[@midnight347]

Also the deep dish terminator style wheels don't look that good imo. Better off with a stock style 10.5 inch wheel imo. Deep dish looks good on these cars just not that style wheel.

[@DerekBaranProductions]

Yeah i can agree

[@5.0_meatballmarinara]

Just bought 315/30/18 r888 yesterday 660$ for the 2 rears

[@DerekBaranProductions]

Shesh

[@Ebreezy2times]

Lol I never thought I’ll say this about a alternator but that alternator is 🔥

[@brandonburchell8]

Drive it around the block and see if it lowers any. But it might just need a meaty rear tire, like 315/40 or 315/45

[@midnight347]

They don't make those sizes in 17. 315/35 is same height as 275/40 which is what they come with stock. If he wants the rear tire tire to be taller than the front he's gonna have to go lower profile on the front. Best thing to do is lower the damn thing and get ride of the gap that way. 315/35 and 275/40 is a proven 17 inch staggered combo for these cars. Same height on rear just wider. It is crazy how many people don't know that much about tire sizing and how it works. People see 35 they think that means less sidewall than 40.....that only works if they're the same width.

[@DerekBaranProductions]

True!!!

[@brandonburchell8]

@@midnight347 bruh I know how tire sizing works. The second number is a ratio (percentage) of the first number (the width) for the sidewall height

[@Blueovalnation]

What?!? Those look way better except the wheel gap, you either need to go lower in rear or a bigger tire, super simple, looks way more aggressive

[@natethegreatog]

Go to a 45 height tire size fill the gap a little bit more

[@DerekBaranProductions]

Yeah might have too