This feature is a Timesaver | Mixing Station: Feedback Detection

How to use feedback detection in mixing station app
- My Instagram: / danielkharrat
____________________
- Mixing Station Tutorials: • Mixing Station Tutorials
- M32/X32 Tutorials: • X/M32 Tutorials
- MR18 Tutorials: • X/MR18 Tutorials
- Epic Orchestral Covers: • Epic Orchestral Covers
____________________
#mixingstation #feddbackdetection #livesound

[@CraftonBarnes]

I can now officially say that every single time I look for a Mixing Station topic or an X/M32 one I always, ALWAYS end up saying "Thank you Daniel! Finally one that explains what I was actually looking for." I wish I could just clone you or make you into an AI on my phone lol. But seriously, I come from the analog world for over 25 years and only you seem to speak both languages so concisely and efficiently. True Jedi.

[@christianpolak3011]

Thank you so much! Just got an XR18 and this helped me out a ton

[@user-mc7nr8je7q]

That is great feature!

[@williamtheconjurer]

Great video. Thank you

[@user-kv8go8gj2m]

وحش ❤❤

[@sylvesterkumi1329]

Great one Daniel .. what if you are working with more than just one microphone. That is what if you are working with about nine microphones, how do you select your RTA source ?

[@danielkharrat]

If all of them are feeding back you would put them in a subgroup and insert the geq on the group and select that as the rta source

[@donderwalvis6772]

can't you just select the same bus as both RTA source and target? So let's say i have a monitor mix for my drummer consisting of kick, snare, overheads, bass, guitar, vocals, can i just send all of these to the mix bus that ends in the monitor for my drummer, put an eq on that bus and then choose that bus as both the source and the target for the fdbk detection? Or would i have to double bus and have a bus that serves as the mix for my drummers monitor and send that to another bus that serves as the output?

[@vaqiftahmazov7927]

thanks for video can i use this method to my PA system do you recommend it?

[@danielkharrat]

No don't put a graphic eq on the speakers. Just deal with the mics that are feeding back

[@edsonsimpson283]

Good day thanks for the video. Question is it possible to use this on the main LR or this is for monitors only

[@danielkharrat]

Yes of course if you're main speakers are feeding back you can definitely do that Any graphic eq that is inserted on a channel or bus or matrix will show up in that page But in that case i wouldn't insert a GEQ on the LR bus, instead i would send the LR mix to a stereo matrix and put the GEQ on the matrix Or if there are too many frequencies feeding back and you have to do too many cuts, put it on the channel itself or put the microphones that are feeding back in a subgroup and insert that GEQ on the subgroup Because if you remove too many frequencies from the speakers, the sound of the instruments will become bad

[@edsonsimpson283]

Wow that’s a lot pleeeeeaaassssee do a video so😊 thanks in advance

[@omdavra6172]

How to use Headphones

[@omdavra6172]

In mixer

[@heresjohnny2023]

can you make a video on how to tune the room? Using the pink noise.

[@danielkharrat]

kzbin.info/www/bejne/j5nUqnx4jNKglbc