This Four-Wheeler Was SUPPOSED To Be A Quick Fix

[@Ajaxaxxess]

Ive brought back more than ive lost of those master cylinders running it through an ultrasonic cleaner. Thanks for the vidjya bud! keep on hustling!

[@TheATVHustle]

I’ll have to try that next time, I have never thought about that. I rebuilt a few in the past but they aren’t worth the effort with how cheap they are now.

[@Ajaxaxxess]

​@@TheATVHustle yea dude they are dirty cheap.

[@offthestreetsandinthecreek7294]

Glad to see you back . Those grizzly 600 are money pits . I have a couple here that just sit .

[@TheATVHustle]

Yea buddy, just a little late. The next one may be too. It looks like this snow we’re are getting is delaying FedEx. I normally don’t mess with the 600s but my buddy had it so it was too easy to buy. I can’t believe the oem carbs are so high now so I may just part it out if I get another.

[@1jandsjensen]

Love your channel and all the variety of atvs you work on. You are very talented in problem solving these tricky machines. I hit the "like" every video you put out. If I could make a request, to stop dropping the "F" bomb so much.

[@TheATVHustle]

Thanks! I try to edit out the f bombs but a few make their way in.

[@natecaslin]

Love it. I wish I would have known you needed a carburetor. I have a 600 on the lot.

[@TheATVHustle]

@@natecaslin I knew I should’ve asked you but hey now you know you got an easy $500 carb sitting out there.

[@Williamxmr]

Outlander 1000 here, plowed over a foot of snow this week 😂

[@TheATVHustle]

I love the outlanders, I have an 850 xt for my personal machine. We’re supposed to get 8-12” of snow today which is rare to even get snow on the tx/ok border, plowing it does not sound like a good time 😂

[@Williamxmr]

@ bro it’s so fun! I have the trunk box with speakers and a heated jacket and heated grips. I plow all my neighbors driveways too because it’s like playing lol The 1000xmr in the snow doesn’t mess around

[@TheATVHustle]

@ the can am branded trunk box that’s roughly $600? If so how do you like that. I have been thinking about getting one but I wanted it up front so I could hear it better. I can barely hear the audio tube I have with it in sport mode at half throttle.

[@Williamxmr]

@ yep that’s the one. It’s decent, I can’t run it in the front because xmr but if it was pointing at you it would be even better. I have the can am yosh pipe and it’s still pretty good, obviously better at lower speeds. But for a sound and storage combo I’d buy it again.

[@chrisplace3024]

Hi from Cold Vermont. It is 11 degrees with out the wind.

[@TheATVHustle]

🥶 yikes that’s cold

[@christianstanek8265]

Where do you get batteries for that price?

[@TheATVHustle]

This one came from walmart but ebay and amazon are cheap too.

[@christianstanek8265]

@ no more oreillys for me anymore, $100 a pop there

[@TheATVHustle]

@ yea they are high on battery prices. eBay is the cheapest if you can wait.

[@frankcoons3280]

Would spray foam help shape the seat ? Just a thought 😂

[@TheATVHustle]

That would be a bit stiff 😂

[@frankcoons3280]

@@TheATVHustleI totally get that.😂I was thinking small spots. More for shape. Then comfort.

[@frankcoons3280]

Btw Great videos !!!!

[@TheATVHustle]

@ thanks bro

[@evanwilliams2602]

Not dry up here,1990 quadzilla 1500 last month, going to be a resto but I got super lucky

[@robertdavis4184]

Use a little bit of WD 40 to remove or put those grips

[@TheATVHustle]

I have heard of using it to install but never to remove them, How do you get them off with it?

[@robertdavis4184]

@TheATVHustle if there is a small hole in the end of the grip ( outside part ) I stick a Phillips screwdriver in under the grip and then take WD 40 with spray nozzle stick it beside the screwdriver.. work the grip a little bit and then should slide right off

[@TheATVHustle]

@ interesting, I’ll have to try it

[@robertdavis4184]

@TheATVHustle make a video of using the WD 40

[@nickjames2267]

Gotbmy 99 kodiak 400 seat done with the back of a Canadian army jacket and it has a pass threw zipper pocket on ghe back and its a brown tan almost mud lol

[@TheATVHustle]

I have seen a few with tshirts for covers 😂

[@Sinister.6ix.customs]

Thats a decent atv

[@TheATVHustle]

It will bring some money in! I have gotten a lot of responses on it already

[@TheATVHustle]

@@Sinister.6ix.customs where are you located?

[@TheATVHustle]

@ that’s a bit too far of a hike from Oklahoma 😂

[@andyanaoutdoors2487]

I'm a Yamaha guy since day one but those are not good machines.

[@TheATVHustle]

I have never heard anyone say anything bad about the 600s although I’m not the biggest fan of them my self. What makes you say they aren’t good machines though?

[@mikeboring1293]

So your a hack because you use good old parts lol No that’s called keeping it factory. Just keep doing what your doing.only thing I would say is get paid for your work more yeah I get it you need to make money for family just don’t sell yourself short you a great atv mechanic

[@TheATVHustle]

Thanks bro! All the machines I work on are units I buy, I plan to buy more higher value units that would increase the amount of profit I make on each one. Atvs like the one in the video would have been more profitable if I didn’t end up putting so much in parts.

[@2stroketime348]

you don't value your time?

[@TheATVHustle]

I do, I need to get better at figuring out how many hours I actually spent working on each unit. This one probably puts me somewhere around $100 an hour.