This Is Not A 1JZ.. // MA61 Supra Manual Swap

[@iliketorockrock]

Thanks!

[@TheDuckseason]

Sarah , Keep it going girl but regulate yourself. No burn out . We care.

[@pkane5472]

At least 56 of us care!

[@brianhendricks5326]

Make that 57

[@davidblalock9945]

84 of us!

[@razorraysolarsavings70]

Yup, work life balance is a must.

[@larryhall6416]

Great advice

[@DavidGarcia-lf7bd]

Thanks!

[@adventurechannel67]

@9:59 BOOM. 🔥☄🛸 😅

[@nicholasmercorella5318]

We use a dry ice blaster to clean injection molding tooling. Great tool for cleaning without etching

[@luiwammes4193]

Love the way you pronounce UrQuattro

[@aijcadd]

That shock wave was something ! Converting auto to manual, impressive. I wouldn't even dream of attempting that.

[@jimburig7064]

It's important to use the right parts!

[@scotscheideman9800]

I loved the missile guidance bit!

[@bandicoot543]

thank you for showing the carrier bearing install! we got an 84 project mk2 that was in pieces and that heat shield has stumped us as to where it goes. now we know, I love that you show all the little details.

[@briansummers6074]

That's what Sarah said.

[@NT4XT]

7:40 "... I'm 'SWOLE'. . ." 😂 the whys i❤ Sara 'n'Tuned videos. Like voicing that rare and precious metal, "Unobtainium." 🙃

[@53rdcards]

I got a set of magnetic socket adapters off amzaon, they look just like an adapter for changing sizes, but dont change the size, instead they go right before you put on the socket, and have a magnet in them, it holds the bolts in the socket for hard to get to places. Put that thing on wheels, and take it outside when you need to pressure clean something, keeps the shop clean of vapors, and might also help you see with the sun light.

[@deebrazier1928]

Noticed new graphics. Nice💚

[@terryfleming7084]

I love your attention to detail! Thanks!

[@georgeadams5278]

Wow. It worked.

[@abpsd73]

80's Mazdas also had "numbered" bolts 4/6/etc for the mm size of the thread.

[@pureinspiration9140]

You are a real treat to watch and listen to.

[@zundfolge1432]

evaporust is my go to

[@3vom918]

7:34 "Angel Beefcake"

[@mikeklein4949]

You are now an artist!

[@pnk9055]

Hi Sara Install a small car rear window wiper in that box. You love it!

[@mikeklein4949]

Thank you!

[@1986XRV8]

You need a sandblaster and a vapor blaster.

[@erichinkle8522]

Lowes sells gasket sheets 1/8" thick .. about 6" x 6" square in the toilet parts section (like flappers and such) super handy. They are less than $10

[@thekatmann9730]

10:26 - Angel Cream Cake??

[@Alientraveler003]

Absolutely awesome thanks

[@stevegraham3817]

2:48 - 70s, 80s, and 90s, hot Toyotas in the one shot.

[@515productions-llc9]

Graphics...🔥

[@trbowlin]

coat the inside of that window in the homemade vapor whatchamacallit with Rain-X. It'll help greatly with visibility

[@whitlermountain7198]

How the fuck are you so knowledgeable this is awesome

[@timothyhouck6218]

Yeah, I would like to watch you learn to weld. I feel like I learn so much more from your videos because you go so in depth with things.

[@francisp-l2q]

I truly adore all your work, being passionate on this type of restoring old imports from the mr2, celica and now the supra mk2, not only that but also the way you spend time on your grandmothers ford ranger, more power on your you tube videos.

[@mikeakhurst1855]

Fancy new graphics 😊

[@jonrandall5490]

Excellent content and nice to watch !

[@nicholasmercorella5318]

Back in my Navy days the Supra was my dream car. Great to see one being revived

[@blainedyck3836]

Need a windshield wiper on the inside with a water squirter

[@brentonk461ismylostaccount]

Just use an adaptor and your shop vac connected to the blasting cabinet

[@SarahnTuned]

RIP shop vac

[@williambrown7268]

I believe you can get glass beads at tractor supply

[@Axial_Andrew]

The special turkey Toyota diff, used exclusively thru out the 1980's...😃

[@jhargarage]

Like the new fancy font.

[@theodoredugranrut8201]

We know a little about parts swapping rarely does it go smooth or as planned and that's not a car from the 50s or 60s. Thanks for all your work. Central California watching

[@coreyscarrepairs]

@sarah if I remember correctly, when using a crows foot on a torque wrench it has to be at a 90 to torque accurately. otherwise there's a chart you have to use

[@SarahnTuned]

It has to be the correct size for the bolt first

[@randyfleet9968]

I like the graphics!

[@James-sir]

RAIN X ON THE MEDIA BLASTER

[@jeffthorpe8667]

Rain X or ceramic coat the inside of homemade booth window

[@linus4au]

Sick Old School Deftones shirt!

[@steveishere7909]

Sun Faded black carpet quick, inexpensive yet fairly permanent fix is liquid boot black.

[@w1jim]

When I started in the car stereo business years back one of the first cars I worked on was one of these. As I quickly learned there are an overabundance of 10mm bolts holding that lower panel on. I thought I'd removed them all but when I gave it a tug I sliced my fingers. Cousin Dos

[@MrBillrookard]

As someone who just did an auto to manual swap (01 Ranger 4cyl auto to 5.0 5spd), take the seats out to swap the pedal box. It’s easier laying on your back upside down…

[@Daywalker05]

You are so extra! I love it! 👍😁

[@stevoc123]

Angel beefcake 😆 💪🏻

[@tonyscott6162]

FYI, The gear stick location is a shifter housing problem as the floor pans are the same between auto and manual, I checked the part number.

[@SarahnTuned]

Negative, the shifter housing came out of the exact same year Celica Supra. The floor pan hole is different.

[@tonyscott6162]

@@SarahnTuned you are correct, the pan is the same but they changed piece that spot welds to the floor, sorry my fault, didn't see the plate in my EPC, you can get a housing that works as there are 10 versions for the W box.

[@robertkerr8734]

I got my Supra shirt and its sweet. Thank you !

[@frantzalvarez8551]

Always wanted a celica Supra since I was 8

[@wickidpandagaming7600]

I got my SHIRT!!! Great designs, great content!

[@bonnaroobanzai7521]

On the contrary, gravity is foremost on my mind. 🖖🏻

[@vincentdickens939]

Those numbers on the bolt heads are the bolt grades. Japanese bikes have had those markings since forever.

[@caryralls7488]

I have that same 12T press. Probably half the people watching this video do. Got it from everyone’s favorite cheap tools store with a nautical theme in the name.

[@frantickoala994]

WE NEED AN ANGEL AMA!!

[@AgeCobra]

Got to love Baking Soda

[@feinpowertoolssaleswest6514]

Have you tried coating the inside of the window of your vapor blaster with Rain-X? Might help improve your view.

[@mikefrench3800]

More great content. Like the new editing software too

[@pme166]

I know it is a long time ago, but whatever you do with the ultrasonic don't run it dry for even an instant. I bought mine as a rebuilt because someone else nuked it by running it dry. Also don't put your fingers in it while running. It is hard on your bones and marrow.

[@Bowtie4me]

remove the driver seat before working under the dash its going to help alot. after you can lay on the floor of the car and not have the rocker messing with youre back!

[@loveme2judy]

Ah.... The joys of work. You are a true car guru. Keep on with yo smart self.

[@brentonk461ismylostaccount]

Oh What Feeling.. Toyota

[@edgarforsythe8539]

Hmmm they usually call that the cheek poker.

[@mrbill8542]

VGG calls it the "cheek poker 9000" !!

[@mikeklein4949]

4 bolt, is that the grade of steel?

[@TheBuildRoom]

Full face mask when using those drill or grinder brushes for sure!

[@brian5o]

If you do end up having to pull the dash out to install the new pedal box you may want to go ahead and replace the heater core and evaporator (if it is an A/C car) while you have it apart. I believe both parts are pretty inexpensive if you can find them for the car and are both probably really easy with the dash out of the way.

[@MyDarkSide62]

Another badass video! Thanks for all you do. Great Sunday afternoon gearhead entertainment. Have a great day

[@boredom.victim]

did I hear that correctly? Sarah needs her hole wallered out so the shifter shaft can fit?

[@briankelsey4232]

this was my first car! not super fast but fun drive all the same and that wedge design! so sick! i gotta get in on this giveaway!

[@morriewyatt6234]

10:25 You would think that by now Angel would know better than to hand Sarah a straight line like that.

[@garyworokevich2524]

I enjoyed the drama in this vid. Real problem solving. No bullsh*t.

[@2605155]

1:55 wax and grease remover... You mean - soap?

[@goodtimefishing1005]

It's funny vice grip garage calls them wire wheels cheek pokers

[@puchitocastillo5450]

is that James May on the postervin the back ground... story.

[@JamesSmith-rg4kr]

Baby girl you and Angel be putting in work.. y'all not playing

[@robbytheremin2443]

I think your crowfoot set doesn't have a 12 is because that's close enough to 1/2" SAE to not matter.

[@kirknewton100]

Busy busy busy😊. Liked the reaction to that shock wave 😂.

[@67stang65]

Extensions won’t change torque spec

[@ericernst7414]

Screw behind the speaker grill on the drivers side if I remember right.

[@JB-tc7np]

Maybe add some wheels to the "vapor booth" to roll it outside when you use it? Btw, love your posts!

[@Kodiak660]

SARAH!!!!!

[@grahamwright6813]

Nice work Sarah cheesecake 😁

[@bullboyracing9517]

Love the Supra just can't enter 😪😪

[@dylanwanke256]

As someone with OCD and ADHD pls know ur thoroughness for cleaning parts and making sure they’re great before you install it doesn’t go unnoticed!!! and also yes angel pls just stand there and look pretty LOL

[@chrisdvasquezzl1]

great show Sarah1

[@ziggyinc]

I think you got Boomed. Sounded like a sonic boom from a fighter jet.

[@SarahnTuned]

Negative

[@wild_lee_coyote]

Sarah goes above and beyond for her giveaway cars. Someone is going to get very lucky.

[@petermoller8337]

If all of us bought her a coffee her new shed will be done

[@brucedavids4977]

Just use break cleaner.

[@alexisstarsmith1477]

When one "catches" a wire it's a zipper f'er! Catching is being impaled by stray shedding & lucky because there's little margin in trajectory to get STUCK! 😹 But on the lip - oh🙀😿😹

[@bkimby4429]

Chunks are now turkeys. Love it. 😂

[@Bowtie4me]

the pumpkin is called a Pig in french canadian! 🤣 "le cochon"

[@alpine7840]

Thanks!

[@MarioFunk]

Rain-X on the window of your cabinet.

[@juhajuntunen7866]

Sarah's own Hydraulic Press Channel!