This is Real Mechanic at Work Rebuilding Turbocharger || Turbocharger Fail Due to Poor lubrication

This is Real Mechanic at Work Rebuilding Turbocharger || Turbocharger Fail Due to Poor lubrication
#turboproblem #turbochargerfailure #heavydutymechanic

[@CC-ib6yy]

This workshop has a concrete floor. Next level stuff!!

[@walter9724]

Holy cow. That's worthy of noting in the Jedi archives 🤣🤣🤘

[@bigpimp347]

"kerpal did you balance the core ?" 'of course i did' "did you make sure everything was torqued up ok and running freely" 'yes of course i did' "that's good the last turbo you built you machined shit out of it, stuck it all together without any care and hammered the overtightened bearings to make them free, good job" (kerpal walking away) 'snigger laugh damn idiot'

[@khamkham7134]

Guaranteed repeat customer.

[@boediprasetya2850]

and after the turbo is replaced, the diesel engine is ready for runway

[@bigpimp347]

@@boediprasetya2850 That is good Rafique fill engine with good oil so will run longer before it goes bang..!!

[@Sammyt07]

You talk too much

[@mdtransmissionspecialties]

They truly amaze me with transmissions.

[@cypeman8037]

This really surprised me, someone working on a bench rather than the floor, a bloke in bed and another knocking one off in the background, all within the first minutes of the video.

[@costsman24]

yeah and not to mention the guy working on it is much to clean. He must be the owner putting on a show for the camera ha ha

[@dfor50]

@@costsman24 I think the owner/boss is lying down. That's what my boss does.

[@dannythompson1948]

I think that's why the title says 'real mechanic'

[@karlsanderson8127]

Well it is amazing things official

[@jameskwak3198]

had to go back and watch beginning but ya that guy may be touching himself...lmao!!

[@andrewgruzdev9631]

Ваще матёрые ребята. Без перчаток, босиком, тут же чаёк попивают и радуются жизни... 😎 Вроде и все пальцы на руках на месте. 😆 Занимательные видосы на канале. Я так понимаю, что если этим чувакам дать ещё не большой толчок, то они из говна, ржавых труб и палок соберут шаттл и съе*утся с этой планеты. Хотя может уже сделали 🤣

[@VasiliCH163]

Да не то слово какие матерые! Он как начал шкуркой посадки тереть я чуть пивком не захлебнулся, лопни мои глазаньки)))))))

[@pahatregub]

@@VasiliCH163 я уж думал что не знаю ничего про турбины)

[@user-ym6mn8vy2z]

@@VasiliCH163 выработки у турбины не было. заменили только холодную часть и втулки а горячей обычно больше достаётся

[@RatnikovDV]

Т.е. никого не смутило как легко он снял горячую часть с неисправной турбины? Ничего не пригорело, не прикипело? По мне так это видео на показуху.

[@RatnikovDV]

Т.е. никого не смутило как легко он снял горячую часть с неисправной турбины? Ничего не пригорело, не прикипело? По мне так это видео на показуху.

[@tree8761]

Torque spec: It's tight Balance: It's okay, it'll work

[@sakuraturbo3364]

5psi and you will see the compressor coming off the intercooler 😂

[@barrybills1449]

A Little Noise Is OK, Good To Go, OK For The Road, It'll Make Another Trip.

[@georgiosevangelou9258]

It will be fitted on an 40 year old truck, permanently overloaded with some million km on odometer and you think the torque on those bolts will be the big problem....

[@walter9724]

The original "she'll be right" attitude 🤣

[@tipetu]

9:50 And then Burt Reynolds appeared out of nowhere

[@herrakaarme]

He got his Firebird's turbo fixed.

[@blagoev3491]

Now you know, when your turbo fails just get the toothbrush and clean it with some gas

[@Ahmed-AlSharahili]

He is a just a master in his work , Mashallah. Greetings from Saudi Arabia to our brother's in Pakistan.

[@ericteipen]

That big chip missing on the compressor wheel won't have any adverse effects at 130,000 RPMS now will it lol...SCREECH BOOM!!!!

[@karlbraun9564]

Amazing, this mechanic is using a workbench, rather than squatting on the ground.

[@zanastumasonis]

:D

[@horstmuller7512]

They rent it just for this video.

[@abdulazeez4540]

@@horstmuller7512 Ridiculous

[@larryreno8293]

The ability to disassemble a turbo and halfass it back together dose not make this man a mechanic!

[@caddyrack]

Yup, seniority gets first dibs.......He's the "senior" mechanic, he has some benefit like a concrete floor, roof over his head and possible a stool to have his lunch. His knowledge pertaining 'turbo' repair, balance and set up is above par.

[@sergeyshi]

Так вот где турбины для камазов производят

[@glen7463]

My turbo looked differen when it was reconditioned and it was on a test rig to balance and check oil flow and actuator over boost,did not notice these steps but better then doing it on a dry gravel floor.

Can’t test the actuator, because there isn’t one. This turbo is used with an external wastegate. But yeah, should’ve at least balanced it... 😬

[@tzajaczajac]

Perfectly balanced with a guessometer

[@robertyoung9960]

I Agree because in the USA , they replace rather then fix !!

[@walter9724]

This isn't really a fix. Its more like a shade tree Sunday afternoon cleanup 🤣

[@russellking9762]

phone call..” who is it?”…Roger Penske….”get your passport and pack your flip flops i need you to come to Indy”

[@JohnDoe-es5xh]

I like, how his colleagues chilling in the background. 😁

[@shabbirpatel2923]

They are not colleague, they are brought this instrument to repair here and waiting for completion of repairing it.

[@jcsxyz2005]

Did anyone hear about the rooster in the background making his call but never finish? 🐓🤣

[@jagatampuh5098]

Selamat beraktifitas bos ku 👍

[@johnwilliams-sc1vf]

That impeller has chunks out of it! I like his sleeping partner

[@BobSmith-mc7uq]

He probably likes you too, Johnny! 😍

[@timhull8664]

Blimey, the guy got dressed up to repair this turbo… and.. he hasn’t done one for a while with those softy clean fingers…

[@frankstanton6972]

Just one man working, good advert

[@Loustylz203]

Not balanced or torqued properly 😂😂😂 i love it

[@johnsilva3472]

I’m concerning about that guy on background, he’s working so much hard😬

[@walter9724]

I think he is too high to move 🤣

[@--Zook--]

I swear every one of these videos has a dude laying back in the background.

[@juanrrobledo89]

I should've had these guys rebuild my Turbo for my Kenworth, might have saved me money

[@davidpieratt]

Honestly real mechanics have a cleaning station with tub. Cleaning the parts in dirty gas is some backyard mechanic stuff

[@garrylearmonth9313]

To be honest I was surprised it got washed at all and that he used a bench rather than squatting in the dirt with the turbo sitting in the dirt. Better than most vids I have watched. That's all I'm going to praise though.

[@elyboytvmixvlog371]

Good job guys..keep safe always Amazing Things Official.. god bless

[@user-ul2ue9eh2f]

Все бы хорошо, но настоящие "турбинщики" должны проверять вертушку на балансировку.

[@dfgggfg]

аллах отбалансирует.

[@Pazair-nq6gl]

@@dfgggfg si, tendrá jornada de horas extra

[@hoofie2002]

The first video EVER in any of these types of videos I have seen someone actually use a set of measuring calipers.

[@rica967]

Next time I need a new turbo for my Porsche Carrera I know where to go....

[@Fukkeduck]

Ah yes. "Real" mechanics don't need to bother themselves with pesky tasks like balancing and torquing.

[@royjennison3916]

that turbo must be 50 years old , its very basic

[@MrBAYTAR35]

-Balance?

[@ferdinandocappelletti6740]

Very good mechanic!: rest : turbibe balance , screw torque are only for " sweet guys ". This turbine will work, without problems. I repaired many of them, without balance, all work. Why ??? This is the chantier school, very all must go, withou sophisticated stories. Naturally that mus check the compression turbines balance, but are you sure that all warokshop do this ????? NO !. Plus, ISN'T CORRECTLY BALANCE, WHAT DO, CHANGE THE INLET TURBINE OR THE COMPRESSION TURBINE ????

[@ryankennedy9414]

All these videos have guys working hard but there is always one guy in the background doing sweet fa the entire time.

[@budatx09]

“Hit it with the steel hammer, don’t worry I see how they work their truck. If it’s not for this they’ll be back at the next door shop for some other things they broke” - this is job security folks. This is how it’s done.

[@jaighosh2690]

He is a real mechanic because he doesn't need one dozen hands to do the job. He is using a simple vice the very right way. WONDERFUL

[@ericteipen]

You obviously just don't know any better bless your third world lovin heart lol.

[@ivanskryabin5940]

Большая турбина около 100 000 rpm, балансировка вала где?

[@Cerberus844]

Балансировка ? Не не слышали😁😁

[@MrDonKastilio]

Так он же покрутил)

[@ryanlynch2259]

Great job!

[@naumanazizawan]

Nice informative video but the turbo charger was only serviced not rebuilding. Opened, serviced and re-packed. Nowhere torque spanner was used, cross tightening was not seen and the trials not conducted.

[@cliffcorbitt9494]

dont need a real mechanic to just replace bearings and spindle. REAL MECHANICS LIVE IN INDIA.

[@8valvestreetsociety012]

This is a video on how NOT to service a turbo not rebuild

[@TheDutchShepherd]

Pfff, says the man with the turbo as a profile picture. What do YOU know about it.. /s

[@8valvestreetsociety012]

@@TheDutchShepherd says the little bitch with 3 subs 🤣🤣🤣🖕

[@danielsatko]

@@TheDutchShepherd i think maybe 100000000000000000x more than u dumbie

[@reedspangler5208]

I really don’t know what to say. But I think my favorite part is the chicken in the background.

[@user-fh7ez9lp7m]

الله يوفقك استاد انت مبدع اتمنى لك الصحه شكرا

[@paulorth2251]

Very nice workmanship on this project.

[@reedspangler5208]

Did you watch he video?

[@abdulazeez4540]

Bahot umdaa 👌👍🤲 🇮🇳

[@bob7923]

This is real cowboy 🤠 mechanic at work destroying a turbocharger. Someone get this man a tool kit!

[@mhz-yn9gh]

Love these videos. These mechanics use what they have on hand, and do some amazing work with minimal waste. Great work & applause 👏

[@elGiaguaro81]

do you realize that such a rough job does not last long? If after 5000 miles it breaks down it has lasted too long

[@AverageCitizen333]

amazing way to waste time and effort maybe. that turbine is gonna spin at 100k rpms, and with all hand tools and nothing top spec that thing is gonna grenade and cause someone bigger problems. this is cancer.

[@ZahidKhan-tj8ty]

Good job.

[@klwarhouse]

To all the balance comments. The blades appeared to have been replaced. I believe with this particular manufacturer of parts, they are component balanced, not balanced as a whole once together.

[@midnightrunner5864]

Really, the components and assembly should be balanced...

[@zafarch9668]

Very good 👍

[@walter9724]

I think my an in white behind him has been hitting the hasheesh a bit 🤣

[@pnireset]

Отмыто по заводу. Новая турбинка для разноса дизеля готова)

[@robsnodgrass915]

Wonder what the $460 Borg Warner rebuild brass and journals run them there?

[@colinevans7134]

All I can see his a clean and put back together

[@REDDOGLewiston61]

Well that are the last about 20 miles.

[@rosanapascoal7747]

Excelente. Envie mais videos. Vices sao maravilhosos neste trabalho.e bom ver pessoas profissionais fazendo reformas e consertos em coisas tao difíceis. Muito bom. Thank you

[@francesconubile6150]

Bravo!

[@user-oz9tc3lq3n]

Абсурдность переборки просто зашкаливает

[@alfaboy33907]

Wo sind die deutschen turbo Lader Firmen wäre super ein Reaktion video zu sehen

[@murph55]

excellent video explaining how to rebuild a turbo, One question, what size shirt did he use to clean all the parts inside the turbo

[@sakuraturbo3364]

😂😂😂😂😂😂

[@patterdalezipsuzilil]

Oh no you forgot to balance it 🤣🤣🤣

[@user-ox5vp6zv8k]

Бля, а как же балансировка.б калибровка, она же выйдет на рабочие обороты и от дисбаланс ебанет 🤣🤣

[@klwarhouse]

I was going to make a joke about this guy being a "real mechanic" not a "fake" one. But first thing I noticed is this guy has a work bench..... I guess he is a real mechanic! 😂

[@mightyORFEN]

Theres a guy sitting on his ass as well. Checks out. Real mechanic.

[@francisdsa6790]

Raffeeeq da juuuuuugaaaaaaad😩👌

[@delboytrotter7902]

Torqued down to 'as tight as i can be arsed Nm'

[@zackvizeman5329]

Now, let's see how it works in a real car!!!

[@DeezNutzOrWhatever]

He is not an American mechanic but still alright though External waste gate.

[@coralcoral7706]

what is the meaning of your work???? wash???? yee what???? Who will do the balancing? it can spill and jam the engine .... then what do you say ?????

[@jacobisacomin6828]

Complete Engine Overhaul to follow next week.....IN THE DIRT

[@230919600]

Well done

[@salvadornisperos9280]

what brand of turbo is that?

[@operonx]

Oil hands are always peaceful.

[@sakuraturbo3364]

I heard turbo compressor blew off and killed a cow crossing the street

[@tontobb8956]

A real mechanic as opposed to what ????? Lol This mechanic brushes his teeth with a petrol soaked toothbrush. He’s hard as

[@LosMt2]

The process here shows why the compressor wheel will strike the housing, I'm sure those gashes on the housing won't be an issue either

[@vipatkovapee7318]

👍👍👍

[@Ped0772]

No balancing? it'll last a month tops.

[@robsdeviceunknown]

Plus, there is a constant theme here. Lack of cleanliness. Some of the "precision" items they make are laying around in dirt etc. So sure, they do a lot with very little. I respect that, but nothing they make will have any durability to it. That may be just fine for them though.

[@wayneschenk5512]

Haha so true.

[@albertobu]

Sure of that.

[@walter9724]

🤣 my mechanic that works on my turbo and supercharged engines has a workshop that's so clean you could eat a meal off his bench tops. If I was stranded in Pakistan and had to get home and I no longer needed the car I was driving, I may consider this guy to fix the car just to get me home 🤣

[@glennbartlett416]

Whoaaaah! can you imagine these guys building a jet engine ? ? ?

[@caddyrack]

Shhhhhh, that's their part-time jobs.....Air India new name is Dirt India......their slogan: Come flies...with us!

[@davidepittiglio8579]

Did a bomb just go off!!!!! No that was just my newly rebuilt turbo!!!

[@danielsatko]

really "amazing" work 🤣

[@GNX157]

My question would be, how does he re-balance the assembly?

[@TheDutchShepherd]

By eye 😅

[@cojones8518]

Hey! He gave it a spin to check it. 12:00

[@TheDutchShepherd]

@@cojones8518 what's good enough for a blind dog is good enough for the customer is what I say!

[@RS-2480]

Hält von zwölf bis Mittag 😂

[@sakuraturbo3364]

Can someone tell me what part of this video is a rebuild because I didn’t see not one new part I could be wrong

[@MikeE30BigSize]

Why was balancing not done?

[@tedcollins4684]

That big chip missing will be ok at 100k rpm?

[@arthurtomczak8474]

Wow work bench , vise

[@bharatpnkhaniya5786]

Kha se ho ji

[@jamesblackcloud1489]

what the say chicken 🤣🤣🤣

[@battlefield1942]

Rebuilding XD 2 weeks and the shaft will be broken

[@coralcoral7706]

didn't even fix the thread! did not defect the turbine bushing axle, such repairs can be done by anyone who can screw the handle to the fence

[@fuckjewtube69]

Title should be "Why reman parts fail".

[@stewthorne]

why is there always someone sat about doing NOTHING in these videos ????

[@RogueRestorationsLTD]

When they’re finished after the hard day he has to suck the bosses toes for rewards.

[@michaeldeleon7492]

What happen in Pakistan Should stay in Pakistan What ever they build the Should stay there Exept tshirt

[@liamdtraxxas2011]

What happened to balancing the shaft with the new turbine fan, thats the most important/crucial bit of a turbo that's why they spin the shaft and turbine fans up to a certain rpm see how much it out of balance then to balance it thay file abit off the fan blade in the correct place to balance it. Then repeat the process til it's within its tolerances it has to be within thm otherwise it will fail premature or if it bad enough within 5min of starting the engine it wil vibrate its self to bits. 💯💯💯💯👎👎

[@hyphest]

I was just thinking the same

[@benupde1979]

Looked to me like a holset turbo. They are component balanced instead of assembly balanced like Garrett. No need to rebalance after changing the compressor wheel unless the turbine wheel has any evidence of contact with the housing.

[@RollingRoadEFI]

@@benupde1979 What about that fat chip in one of the blades? Lol

[@Gans_Deutsch]

Wer sind die zwei chillenden Typen im Hintergrund? Penner?!?!

[@fex77k]

The website on the file cabinet @10:00 is not valid.

[@delboytrotter7902]

Thats it lads, use all the same worn parts.....that's EXACTLY what a 'real' mechanic would do......that'll scream like a bastard before i manage to get the lid off my chicken curry pot noodle !!!

[@markus9333]

This can be Holset type component balanced turbo

[@JJRrcracingfoam]

How much is this job cost