This is What You Need to Build ‘The Creator’ ‘Octopus ‘ Rig | The Heavy Duty Gimbal L Bracket

[@ODHunte]

Heavy Duty Gimbal L Bracket for RS2 RS3 Shoulder Rig Mounting. “The Creator” Sony FX3 Octopus Rig Style. Available now on motionpicturehardware.com

[@NijuGeorge-z7o]

he only confusion I have about the Power Supply Base Plate for DJI Ronin, No one is talking about that part, Is this L shape plate include that ? Thank you

[@DroseMr]

Whatever materials you used that come in the L mount kit should be an industry standard. 😅Thank You

[@ODHunte]

Thanks again ⚡️!

[@mill3ronfir3gaming51]

this works with the tilta shoulder rig also ??

[@ODHunte]

You should be able to use the tripod plate that comes with the Tilta shoulder and mount it to this as the HDGLB has many mounting options :) 👍🏿 Underneath

[@assarhopaneng7339]

Received my "Gimbal L Bracket" today and it is well made. Waiting for some other parts, then just build the shoulder rig together as soon as possible. Thanks for an awesome product!

[@ODHunte]

Thank you my friend! Love that! Please send some photos once you have your rig so that o can feature you on social media! Best Owen.

[@AINEET]

Oh damn, I was just looking into how to make a custom lemo cable. If you could make a tutorial that'd be interesting. There aren't many options for the 2 pin lemo the plate uses

[@ODHunte]

Ok. I’ll look into doing that in a future video. Thanks. Hope get back to you soon..

[@user-nu8bf3bf9m]

@@ODHunte I second that! That would be super helpful!!

[@barrywallisable]

Really interesting video, it is unfortunate that you only showed the top-down table camera footage as I found myself wanting to see some wide side shots to really understand the rig and to see if this is something I could use.

[@ODHunte]

Yes I got this other feedback too. I will address in another video soon god willing. There will be a photo section on the website soon with more side view photos. Thanks

[@davidp158]

Can you compare how the weight distribution is between this “octopus” rig and something like the Tilta ring grip? This octopus rig looks quite front heavy, but I would hope the shoulder contact would support some of the weight. I have the Tilta ring grip, and while I love the control it provides, it is an arm burner.

[@DanielBasulto]

I may need to rig this up for my next Formula 1 trip gig. I have been considering this build with my Zcam S6.

[@ODHunte]

If you haven’t already, jump on over to motionpicturehardware.com and grab the bracket 👍🏿 Look forward to seeing your rig!

[@PunchNut]

I love the design. Can you mount the Gimbal on the shorter side and have the longer side face down in case you want a shorter profile. A side view would have been great to be able to see.

[@ODHunte]

I’ll put some more photos on www.motionpicturehardware.com You need to use the longer side to give the gimbal enough clearance for tilting.. The holes were also specifically created on the long side to fit all three major manufacturer’s base connectors. Thanks 🙏🏿

[@nealguitarlounge2299]

Just ordered my Heavy duty L bracket, really looking forward to filming with a shoulder mounted gimbal.

[@ODHunte]

Thank you! Yes it’s a super exciting addition to the cinematic arsenal. Please send pics on instagram to @motionpicturehardware if you get a chance.. Thanks

[@nealguitarlounge2299]

Will do. Also could you please tell me the distance measurement from the lidar to the 6k pro sensor? I have the exact same setup, cage aswell, it would just save me the hassle of actually taking the cage off and everything. No problem if you can’t. Cheers

[@ODHunte]

@@nealguitarlounge2299 I’ll have to look and get back to you 👍🏿

[@nealguitarlounge2299]

Thank you very much

[@ahmedsamir7582]

You are a Genius Brother and a great businessman as well... this is going to be my best 125 GBP investment this year. even a fair price for international shipping that's amazing .. Thank you for the hard work, passion & respect for this amazing craft. ... if you wouldn't mind Lets go and see it in action, please .. showing how efficient the Octopus can be on Set. Salute My Friend 🫡

[@ODHunte]

Thank you so much Ahmed. I will try to do a video in action soon. I still have lots to do and also organising the first shipment out to customers ! 🤍🙌🏿🙏🏿..

[@ahmedsamir7582]

​@@ODHunte Since you came with the great idea of putting screw holes to the HDG L Bracket sides , i would like to suggest a tip connecting the ( Tilta Advanced Rear Operating Handle ) left side to the HDG L Bracket using something like (CAMVATE Standard NATO Safety Rail 105mm C2055) i think it will distribute some weight of Rig directly to the HDG L Bracket away from the expansion Base plate tooth. since we already not using that mini weight support bracket that Smallrig include in the kit. and also for overall sturdiness and safety for electronic gimbal connection .

[@ODHunte]

@@ahmedsamir7582 that could work I think yes :) When you get your HDGLB could give it a go!

[@anthonyrock5039]

Congratulations on this great design !! 🎉 may look into it for my little komodo

[@ODHunte]

Thank you. Yes the Komodo is a great one to try it with. I’m seriously considering it myself atm again 😅..

[@anthonyrock5039]

@ODHunte I love mine. It is something I like coming from a stills background. Raw R3D files in HQ on my cheat code for terabyte storage. Properly exposed files with cine glass or canon FD, Mamyia 645 lenses and milvus lens mmmmmmmm definitely a system that will last a lifetime. Also on the experimental side from regular 6k, Resolve studio with timeline output as 8k also fun for the whole family hehehe 😄

[@ODHunte]

@@anthonyrock5039 man you are so tempting me 😅😅.. I think the sensible thing for me to do is hire one and do a shoot and if I can see a noticeable difference then perhaps I should go for it :)

[@NijuGeorge-z7o]

Good Video, The only confusion I have about the Power Supply Base Plate for DJI Ronin, No one is talking about that part, Is this L shape plate include that ? Thank you

[@ODHunte]

Hello the L plate is just the L Plate. No power distribution. Thanks

[@blurry63342]

great set of videos... I'm kind of obsessed with this setup. I will be ordering one of these brackets as soon as I get my budget approved!! quick question about this setup in general. I was chatting with Tilta to get info on the compatibility of the new Nano II control handle and after some testing they confirmed that it is not possible to use the rear operating handle and the Nano II control handle to operate the gimbal at the same time... just wondering if you can confirm that you are able to use both the rear operating handle and the DJI tethered handle at the same time? ...Are you able to go from briefcase mode using the rear operating handle to control the gimbal and then sling the rig onto your shoulder and immediately start using the DJI handle to control the gimbal?

[@Mike_Lynn]

Is there a way to mount a DJI RSC 2 in the same way? It doesn't have the detachable handle, but it does have a 1/4 screw hole when the handle is pivoted.

[@ODHunte]

You really need to detach and put it on a base plate to make the most of this type of set up.. Sorry. If it were me, I’d sell the RSC2 and buy a RS2 or RS3 second hand on Ebay.. You have so many more mounting options being able to take the grip off.. plus beefier motors on the RS3 Pro

[@randallburgess6393]

A side view would’ve been great so we could actually see how all this is looking and configured and Ashley see it up on your shoulder

[@ODHunte]

Yes, agreed. More content coming soon. Thanks for your comments.

[@ODHunte]

kzbin.info/www/bejne/nHaoXpl3nNFjjdksi=8NmpZqwVruR15PA8

[@poti732]

At 12:26 i can see a velcro cable tie thingy , where did you get that , I was looking for ages to get something like that.

[@ODHunte]

Hey, yes these are super handy! amzn.to/3TPDSe8

[@AINEET]

My take on mounting it was on a v-mount cheeseplate. Battery on one side, rs3 pro on the other, but I've been looking for a better solution as its grabbed to the rodholder with just 2 1/4s which makes me anxious with so much weight on it. Being able to distribute the weight through two rod holders seems great tbh. I might pick it up. I really want a good sideview of it with everything on tho

[@ODHunte]

Hi, been busy getting everything set up. Will get some side view shots on the website soon. This L bracket is built super solid and you can put a heavy system on there without fear of any bending. 👍🏿

[@electricdreamer]

What if you put two cheese plates and you got 4 rodholders?

[@AINEET]

Here's a third comment lol have you had any luck running both the lidar and the raveneye at the same time? From what I've read the way to do it is to hook up the raveneye normally, then you daisy chain the lidar to the motor and the motor to your vmount battery. Thing is, that you need an a dtap to usb with no PD standard because otherwise it defaults to 5v and doesn't give enough power to turn it on. There's little info and videos on the matter, but there sure is some

[@ODHunte]

I’ve not had any success doing that. As far as I found it was either or but perhaps I need to dig deeper.. if I get some time I’ll have a look at some point. Let me know if you find out though.. thanks

[@JOEBLACK1979]

tha ks for sharing bro, i also built one!

[@ODHunte]

Would love to see your creator rig. Got socials?

[@JOEBLACK1979]

@@ODHunte yes bro I have Socials , but didnt post it , i wanted to make a video about it but i gut lazy! i might use it in a Film this month! the rig is modular i can turn it into just shoulder mount for the black magic, i try to build everything in a way i can use or combine with the rest of my equipment

[@ODHunte]

@@JOEBLACK1979 perfect! When when you are ready, look forward to seeing it!

[@JOEBLACK1979]

@@ODHunte i just uploaded a picture in instagram, have an awesoem sunday and greetings from Budapest!

[@lostinjapan4609]

interesting parts. do you ship to Japan?

[@ODHunte]

Hi sorry just seen this! Yes I have sent some units to Japan already from the first batch! We ship worldwide directly from the factory in China 🙌🏿🙏🏿✨👋🏾

[@francescoperdono]

Hi, what 1/4-20 screws should I get to attach the power supply base to the L Bracket?

[@ODHunte]

Hi, try these : 1/4”20 Screws amzn.to/47kwhrn

[@francescoperdono]

@@ODHunte I should buy the 2 inches one or the 4 inches one? Thanks for the quick answer.

[@ODHunte]

@@francescoperdono 2 inch is definitely enough.

[@DroseMr]

I made a short to show your product as request for pics.Thank You

[@ODHunte]

Great.. Could you send on Instagram ? /motionpicturehardware ?

[@DroseMr]

@@ODHunte I only youtube . I will copy the link incase.Thank You

[@bwest6275]

Hi, does this also work with the RS4?

[@ODHunte]

Yes it does! Thankfully DJI kept the compatibility with the previous peripherals ! 🤍💫

[@DroseMr]

If i want to break crap i should be allowed. All mounting bolts on the market heads strip out!Whatever materials you used that come in the L mount kit bolts are badazz!should be an industry standard. 😅Thank You

[@ODHunte]

Thanks my dude! Glad you like it! Happy shooting 👍🏿

[@HighDesertEntertainmentHDE]

Just ordered! Can't wait!!!

[@ODHunte]

Nice one.. coming soon 🔜

[@electricdreamer]

How long are the rods?

[@ODHunte]

They are 10 inches my friend. You can use whatever length suits your build but if they are too long the bottom of the camera plate on the gimbal may hit the rods / handle

[@James-Tanner]

Do I need the cheese plate? The website has too many options

[@ODHunte]

You don’t *Need* the cheese plate but it gives you extra mounting options. If you wanna go basic the just get the L Bracket. Thanks !

[@nealguitarlounge2299]

Sorry to be a pain, but what is the average waiting time for dispatch of the L bracket? Many thanks

[@ODHunte]

Hi not a pain! You should allow up to 21 days from ordering for dispatch which is by FedEx or UPS. FedEx usually takes 3-4 days. That being said, the brackets are made in batches and depending on where you are in the cycle of manufacturing you may only have to wait one, two or three days. Obviously I’m pushing the factory to make these as quickly as possible. There’s another batch coming in a day or so so now’s a good time to get the order in. Thanks!

[@nealguitarlounge2299]

That’s great! Many thanks, my order was put in a week ago, so that info helps me plan ahead. Thanks for the quick reply.

[@ODHunte]

@@nealguitarlounge2299 sure thing! Look for an update shortly by email

[@santlife]

Ordered

[@ODHunte]

Good man! Excited to see what you build with it! Thanks 👍🏿

[@lzafar]

Going to order now. You are ok sending to the US? Which country are you in?

[@ODHunte]

Hello I'm based in London. The units are produced in China. Of course I ship worldwide. Thank you for your support. :)

[@lzafar]

@@ODHunte ordered! Thank you

[@ODHunte]

@@lzafar thank you my friend. Will be shipping soon. Will send updates via website

[@lzafar]

I have a full shape shoulder rig. I will try to make it work with this mount. May need that custom cable you made as well. Or another instructional so I can make it.

[@ODHunte]

@@lzafar which camera do you have again?

[@schmollywood]

Shipping time estimate?

[@ODHunte]

Approximately 20 -25 days. Thank you for your support!