This Lumber Mill Can Refine the Biggest Trees! - Scrap Mechanic Survival Mode #12

[@Moonbo]

Check out my original Lumber Mill here: kzbin.info/www/bejne/bqnQiqOenJV5r7M I can't believe we're finally doing it for real!

[@TenkaiZ]

Amazing creation so far, Moonbo. Do you have a plan to improve your mining vehicle?

[@sxveng3847]

monboo add a horn to the truck

[@gracegarcia5641]

Moonbo hi

[@gracegarcia5641]

XxMR BRO GAMERxX beep boop

[@sxveng3847]

@@gracegarcia5641 what is wrong with you bro ?

[@imnotsure6618]

Moonbo: this tree almost killed this poor little farmbot Also Moonbo: kills the same little farmbot with the spud gun

[@Retrodogo]

Victor Middleton haha

[@rovilsonhillarysanjan4820]

you were right

[@emrah_8073]

I was about to comment the same thing lmao

[@generaldraeckos55]

*K.O*

[@Welshy101]

I was just scrolling down to find if anyone said that and this was the first on the list xD

[@negativenarwhals]

Hey Moonbo, you can make the wood crusher turn off the blades automatically by putting a sensor and an xor gate, the sensor at the end of the thing so it detects when the piston wall is pushed in all the way. You hook up the sensor and the switch to the gate, then the gate to the engine. :)

[@FaSchla]

You also can use a controller for it, and save fuel.

[@dynamitemonkey6635]

Connecting both engine and pistons to the same button would be easier.

[@BigTreefr]

Ooooooooooo that's smart

[@tddup657]

"The trees are unrealistically heavy" *Picks tree up with single handed tool. I dunno man, the ones that crush houses irl seem pretty heavy.

[@WuffyWolffoot]

I respect your desire to play legitimately versus exploiting glitches; it is far more rewarding when you get something to work as intended.

[@danieldavidson5447]

Kan, moonbo, kosmo, camodo, etc. Should do a multiplayer series together

[@samueltheblonde]

And Scrapman!

[@gamingwithclark2830]

Yea

[@danieldavidson5447]

Isaiah White how could I forget! 😂

[@MrGamer-dz4zf]

And scrap man !!!!!!!!!!

[@jelle2306]

And dieseldesign he has a legendary base and way of thinkinh

[@MaelstromWrath]

This blows my mind. I hope it's intentional. You can weld the caged farmers too. Hope that's intentional as well.

[@slate613]

But only after playing farmer golf for a minute or two! :D

[@Q_master_NL]

And they are super boyant. They can't sink!

[@alexandercohen3078]

I WASTED SO MUCH TIME

[@saeklin]

Might only be on older maps because I can't weld the farmers :( I hope I can weld logs, haven't tried yet.

[@Q_master_NL]

@saeklin there is a specific place where you can weld. It's the metal thing on the back

[@flyingmunk8956]

Moonbo: " I'm sick of telling people to not tell me how to play the.......did I just get a flannel shirt!!!!" 😍 Lol love it

[@pixlr3579]

Moonbo that machine is awesome :D

[@Retrodogo]

Monsterek yea

[@basictortials2987]

Hell yeah brother

[@calelsun]

I haven't even watched it far enough yet and I already concur

[@TheBunny-0110]

Maybe the wood pusser a litel biger or higher

[@filipender7111]

O ty kurna

[@JustaGuy_Gaming]

I know the weld option was removed recently but I love the idea of a lumber mill over just an easy harvest/refine machine. If you made the feed tube a bit wider you could possibly tilt the lumber truck to just dump the logs straight into the feed tube. Raise the walls and enclose it with a ceiling hing so they don't fly out.

[@imTsaky]

Watching trees getting milled is so satisfying. I love it.

[@NotTheRealNeil]

Moonbo: cuts down tree Also moonbo: omg we almost crushed this poor little farmbot here Also also moonbo: proceeds to shoot the farmbot

[@imnotsure6618]

I had the same idea😂

[@emrah_8073]

Victor Middleton you both commented the same thing?

[@imnotsure6618]

Yea😂

[@J0hnB09]

Emrah _ Glitched maybe.(same person said same thing twice.)

[@jaunusender6166]

I like how just as I asked myself "I wonder if he staggered the trees how smoothly they'd feed?" You did and chunks of tree started jumping out.

[@deanjurgens1651]

I think you are soo smart the way you play the game!! I love your videos 💙

[@timf7354]

Something that might be a little more efficient is adding a saw blade to the back of the truck. Then you grab the entire tree, mount it to your truck and run the saw to cut it to length. Then you can mount the chopped off piece too. No need to move your truck around to cut in half, since you are already out of the driver's seat.

[@steeljawX]

I've actually seen haybots distracted by large rock bits. Like when you first break up a block of rock for resources and it splits into the 2 big rocks (which splits into 2 smaller rocks a piece which yields 1 resource log a rock piece) a haybot was running at my vehicle and then it turned and then started attacking one of those. It actually broke it in half.

[@CiphecDec]

I agree Moonbo I would rather see how you play the game. Honestly that's why I'm here. To be honest you Scrapman and kAN such different experinces day one. That it is why I continue to watch you 3 play through survival.

[@michaelrevels3572]

Hey Moonboo, just a suggestion. If you add a blade at the very end that is stowed below/in the trailer and comes up at the very end you could still weld and you the saw blade at the end to cut off anything that hangs out to long and just reweld anything that falls off.

[@shawnmeads1024]

If you add a side pusher onto the truck then a lid to the lumber mill you might be able to speed up the process. unhook the logs form the bed of the truck then push them into the mill. A tipper could also work.

[@reaxion9000]

"Letting your wood sort itself out is a great time saver" - (Moonbo, 2020)

[@justafan9206]

Timestamp?

[@DoggosGames]

@@justafan9206 24:30

[@iainburgess8577]

So... I did this, too; but I wanted to compact it. I got it down to 1 saw blade on a piston, 3 sets of 7wide wheel stacks, 2 on pistons. Weld it behind the blade, activate, it almost autofeeds (had to lift/lower blade & innermost week set manually) the entirety of any tree. Set it up on a truck W collectors, refiner, chests, bobcat, so I chopped then straight to the mill.

[@TheCr0wned]

Probably the most creative, most awesome invention I've seen for scrap mechanic survival so far

[@bananamanjo9553]

Scrap man- takes a few hours to make a car that break trees Moonbo- *Completly makes a tree refinery system*

[@Seakingpanda]

18:58 That's why being a lumberjack is so dangerous

[@captain_loeffel]

To be true, all this welding and so on costs a lot of time. I can get the same amount of wood done with my temporal solution. ;) But not bad at all. My suggestion, skip the last part, rebuild your sawmill a little bit with an additional side feeder and redesign your truck to a dump truck being able to unload to the side.

[@agentv1240]

I'd say put a weld point on the front of the truck, like a little elbow piece at the center, then make a rig to house the sawblades and whatnot, instead of cutting holes into the truck for fairly unsightly mounting points for individual saw blade arms. Then you could also be able to hotswap attachments, so say you want the truck to cut trees, you can weld on an attachment with a bunch of saws and connect some buttons. If you want to be mining with the truck, you could do the same thing, but with drills.

[@ncoll36]

I really like the concept of this lumber mill. It could probably be easily expanded to allow crushing more trees at once. The only thing I'm personally not a fan of, there is still a lot of manual work involved with the whole welding logs, remove blocks and what now. But still cool regardless.

[@ytbest_b0t3m40]

That lumber mill is awesome!

[@PolymerChan]

WOW! im impressed!! Thanks for that, cutting tree in lumber was the worst thing for me , as my truck couldnt ever get the log right! but now im going to change my whole set-up!

[@OscarzProductions]

I think it would be cool to make some sort of magazine or queue for this. That way you could just retract the pistons, have a new log roll in, then push it foward again.

[@disorganizedbones8139]

Can't tell who's my favorite so far Moonbo, Johnbane, kAN, Scrapman, or Squid

[@dummie-8968]

I like all of them

[@uncah_bucchal2953]

Don't forget Diesel, and Z1 isn't bad either! All these guys are great and worth watching just for all the crazy ideas! Especially when you stink at this game like I do!

[@2xvxb609]

Z1 crap

[@slate613]

Imagine a Multiplayer Monday with all seven! The insanity might break the game.

[@greennitrogen8850]

Josh Malley Y

[@ayasekaru]

You could probably build a sort of magazine for logs! Stack the lumber ontop of each other above it and let them drop in one by one

[@Dreigned]

Do you actually have to disconnected the tree from the pusher before you start it? once the last section comes into contact with the blades, seems like it would disconnect when the log changes state to cut pieces. just a thought, I haven't built this thing yet.

[@novas2285]

i have a same question and i need an answer

[@rewrew897]

It probably would effect the pistons, perhaps even make then glitch out

[@uggranpops8442]

yes,yes he did, as demonstrated in the video multiple times

[@Dreigned]

@@uggranpops8442 yeah, I think you misunderstood my question. I asked what happens if you Don't disconnect it. Moonbo disconnected it every time. It may glitch out, as Andrew suggested. Was just curious if it was a necessary step.

[@uggranpops8442]

@@Dreigned ahhh that's actually a very interesting question sorry about that

[@greenmelonx228]

Moonbo! You can place blocks with the vacuum pump, try placing cardboard block on the pusher and making it destroy with a spud gun so you dont have to destroy it and you can jut weld and its automated

[@goaty0318]

All I could think if while watching this is that you could make an awesome log cabin.

[@edskev7696]

I like your saw mill! Maybe adding some rollers underneath the wood would make it faster for the big logs? You could do that with some free bearings and pipe pieces

[@alphariusomegon4442]

I don't even think he needed to unweld the tree because at the end of its cycle it's pressed against the saw blades

[@atrs]

I don’t know if you will see this but I suggest making a glass box around the mill and make a opening door/ window near the pistons where you can weld the trees in, this will stop trees falling out and you could still see the mill

[@Acecool]

You could add an Exclusive OR gate and put the piston switch to that.. then a sensor which acts as a switch to it too.. then the sensor on top of the pusher and detect a color at the end... so when it has reached the end - it retracts automatically. Also, I would've added it to the truck just so you don't have to go back and forth... ie: a split cab design so the tree can fall right into the bed. Then the chomping bit in the back, a lift gate at the front which rotates up then pushes back into the blades. Also a bearing drive double supported to avoid glitching and free fuel.

[@Acecool]

Also, not showing the final after the refineries are done is meh.

[@Anzatnt]

I play the game with a special rule: I don't use chests except for automation. When I travel, I cannot have items on me (except blocks, I'm not insane). It changes everything, and it's pretty fun. I did this because every items in this game have a model, and it makes organizing my stuff all the better.

[@KrawllUnchained]

I really love your method. I'm finally at the point where i'm ready to start logging in the game and i already started work on a machine before watching anyone's machines but, i decided to take a break and do a bit of a search for what people came up with in their games. That is how i ended up in this video and , i'm impressed. It's crazy though, the insane amount of different ways people have come up with to gather their wood. :-D This game is awesome.

[@JakeSimmer]

Im trying to repeat this machine... its nice to play around with the physics and machines and stuff, got a small car with a blade on the side... very funny!

[@hisune_39]

I think a good rule to see what is intended to be picked up/welded would be if you can't place it on the lift, you shouldn't weld it.

[@pseudonymtim5384]

i love how these videos excite me and give me something to look forward to during lockdown

[@epleprekahn4238]

If you plan on refining multiple trees at once, it should go a little easier if the back wall was a little taller. Great build either way.

[@coufar1971]

Thank GOD someone finally said what you prefaced your video with. I'm so tired of seeing people going to other youtubers playing this game and asking them to do the same glitches and concepts. They aren't even interesting in the first place, and telling or asking them to do that is downright silly.

[@TheKaranJGlFor6920]

Very Lucky Guy 😀😁😃😄😍 👌👍👏👏👏 2:23

[@Lucas-gs7sk]

Cool idea. It’s nice to see people playing the game so differently.

[@robertclaussen6743]

I have a suggestion: Connect a large chest to your fuel tank, either directly or with tubes. That way you have increased fuel capacity and don't need to get out as often to refuel.

[@etonblakerussell]

Really cool build, my lumber mill doesn’t work as well as this, thank you for the help!

[@Alexander-dn4rw]

Love the content Moonbo! If only I had a gaming PC, but when it's affordable I can't wait to do stuff like this!

[@PuppyLuvU2]

Oh wow awesome. The truck could use some work to make it easier to take the logs off though but gotta say looking forward to trying this myself.

[@alanboee]

you should put a roof on it, that way the logs dont fly out, and maybe a little bit more walls, just to guide it better

[@MrRomanHumphrey]

Now all you have to do is find a way you can store loose logs that autofeed using sensors and rotary feeders into the sawmill to process :)

[@goldenflyingegg9599]

i remeber when you make a log one in creative. now you've done it legit. It's so amazing to see something old so revamped and improved.

[@Midrealm_DM]

I appreciate that you don't use glitches . I feel the same way.

[@Davouro]

You could also add a craft bot that is on loop at the back end, and make it craft the actual tier 1 wood

[@johnderat2652]

I was waiting for you to make it in survival for so long now, happy you finally got around to it!

[@mossy40k]

I figure this out yesterday, but am still low tier stuff, so if your vehicle flips it won't let you pick it up till you remove the resources. guess they don't want it to be too easy lol I do want to try make a log fort around my farm and see how that holds up against farm raids

[@disso42]

Idea: make a base out of the redwood trees themselves, I don't think farmbots can get through them

[@ExoticButters4406]

Love your vids

[@TheTyeum]

Mill looks great... Maybe have it on a variable height so you just need to reverse into it... saves you from using the pusher and unloading.

[@memberf5555]

@Moonbo Make the truck the same length as the mill. Then place a saw or manualy break to clean up the end peices. 😁

[@josea.ruizquinones9262]

Imagine a vertical cutter on a vehicle. Cut the base, weld to the underside of a tall platform, let it loose to fall into a verticle chute directly to sawblades at the bottom...

[@mobilevadr6857]

What's really funny is that Moonbo used wood to make the lumbermill in order to chop up more wood. So he's using wood to kill wood. Oh the irony.

[@dakotaquinn1513]

You should eventually make the mill wider (maybe 16 blocks?)and weld the trees to the wall thing in the truck and have the wall thing be connected to the truck via one block you can then maybe weld the wall thing with all the trees on the wide mill and process them all at once

[@rice9199]

If you want. Can you build a hammer powered boat?

[@mobilevadr6857]

Moonbo: The tree still exists in some way. Me: Well yeah, that's how things work. P.S. I know what he meant, this was only a joke I thought of when I heard him say that.

[@greengiant9063]

I just said cheers to you and Jungkook cup of coffee you are a good person you don't need cheats

[@mrw5694]

Next maybe build your own base, and make it very cool... I would love to see that Moonbo...

[@Moonbo]

I'll be building a base soon, it's going to take a lot of grinding!

[@deathspark1]

Idea. Make the payload in the front with arms that hug the tree so when it falls it falls into the cart then have a way to manually push it off the cart right into the lumber mill

[@Master-Iddo]

Put free wheels under the Wood breaker

[@gdlifesteal5824]

Moonbo: I don’t want to use glitches. Also moonbo: I don’t know if this is a glitch or not but I’ll use it. Me: it’s a glitch that u can weld the bottoms of trees.

[@Moonbo]

You have confirmed that it's a glitch?

[@JakeSimmer]

I was thinking the same thing ;-) but we all play the game how we want so its ok... ;-)

[@WoH9Shadow]

@Moonbo, gravitiy feed sawmill is awesome. i made it so i weld the tree to a 0 power suspension in the center of the saw shaft and it will process the tree with no issues all the way. (welding point has to be a diffrent "build" then the sawmill it self otherwise the saws will not deal damage)

[@dudemanawesome1079]

Why u cussing don't cuss in the comments this is a no swear channel >:(

[@WoH9Shadow]

@@dudemanawesome1079 changed it -.-

[@WoH9Shadow]

@@dudemanawesome1079 also.... it was a "reinforcement word" since i did not talk bad over anything in this meaning.

[@dudemanawesome1079]

Oh ok good :)

[@KineticCascade]

the lumberjack jacket looks the best in my opinion with the glasses and some gray pants also computer backpack

[@pinknoodle8093]

"This tree almost crushed this poor little farmbot" Pulls out rifle "But failed, and that is something I won't do"

[@akiragreenful]

Amazing machine for sure. Does the tree roll in? Can you try make a ramp to roll the trees in the machine? Maybe put a stopper at the end of ramp to control the input so you can load lots of trees on the ramp if it's a possible thing

[@JessicaMarinaRushie]

I loved that little rant in the beginning, :D also the mill is AWESOME!

[@Moonbo]

Sometimes you just need to vent! lol

[@BaneSIlvermoon]

Make a tailgate on the truck bed that rotates out and then extends down to the ground. Then weld the trees to it standing up, hit the switch to close the tailgate? Easier transport

[@Planetared]

Maybe you can do this layout on the truck, and let just the saws, bots and chests in the floor? putting those pistons on the truck with another layer of wall and make them push directly to the saws, changing the actual height ofc

[@hunterdawson420]

I love the entire idea of this so cool,my only issue is if you get the stump doesn't that stop the tree from growing back

[@Auxetic-]

I was literally building one and was about to crate a big crane like vehicle but then your video came out 🤦🏾‍♂️ that’s freaking dope

[@matteocdt5214]

YES!! Finally someone else that thinks that build a movable full sawmill is not a great idea

[@Ameritude]

I respect the no glitch philosophy, Keep scrapping

[@mobilevadr6857]

The truck almost looks like a transformer or a weaponized apocalypse vehicle.

[@theshadowrealm6935]

8:09 oh no we almost crushed this little guy he says while shooting him moonbo 2020

[@PopCapMusicTrending]

You are the most creative Scrap Mechanic Survival player I've ever known

[@cra-zgamer5741]

Moonbo: we almost crushed this poor little farmbot. Also Moonbo: *kills the same farmbot with a spud gun* Me: 🤨

[@dummie-8968]

love your videos moonbo.

[@thebluefire8297]

You should make the lumber mill with gravity so the trees go down a shoot and into saw blades that way nothing can fly out

[@czzuehlke]

Here’s an idea, what if you add a sensor to the motor so it only runs when it senses logs, if you wanted to be even more complex you could hook it into a logic gate with the switch that activates the piston so both have to be true in order to activate

[@PyrokineticFire1]

I don't think the added conservation the sensor would add would be worth the hassle of aligning it to ALWAYS see any stray log segments that might be there. (might need multiple sensors) simplifying controls to a single switch might be good. don't really need blades spinning except when the piston pushes

[@kendrickbelmonte9889]

I did not know this. This is damn useful. I need wood for my boat. 😂

[@afoxwithahat7846]

You can use those cages, they float more than anything

[@themastertater420]

this whole welding trees is gonna make for interesting new treehouse designs

[@azazash6707]

i wonder if you actually need to break the weld when feeding the trees, or if it being fed through the saws breaks the weld for you. might save time.

[@DennisRyu]

This makes me think if you could actually build a log cabin.... Also thinking about designs for rock crushers... either a funnel of drills and drop them in or also a piston pressing them into a wall of drills.

[@unknown_kidd4455]

Fun fact if a tree is too big for your hammer after it falls, you can weld the tree to a block

[@unknown_kidd4455]

I actually typed this before the video started 💀💀

[@Zenoviax_DFSOU]

Because physics

[@Zomolith]

Actually u can just hammer the trees even if it says too big xD I think that's a bug

[@unknown_kidd4455]

@@Zomolith lol😂👌🏽

[@noahlangworthy9151]

When your in your base you see mono cutting down your trees :D

[@AeciusthePhilosopher]

*Slaps roof of truck* This baby can fit so many trees/packs/farmers in it. I was wondering, wouldn't it be easier to just move the button to the back of the truck, so you can open the tailgate when you're standing next to it? I love how those sawblades are angled, btw!

[@kylekroll3206]

I love all your builds in first person, they always look so good!

[@EPE77U]

I love the way you play survival. You make the creations look so amazing.

[@greghearn526]

I love the lumberjack sweater