Building an Automatic Oil Farm with the New Oil Pond Update! - Scrap Mechanic Survival Mode #31

[@Vraimorte]

Maybe hide the craft bot in a pump house and connect the chests to it with tubes.

[@sugard8099]

Also shorten the pull/push bar that goes in the circle so it pulls down more

[@lilwhitecrow]

That’s smart dude

[@wickedfast2166]

Craft bot maybe fit in oil pond?

[@ChristmasTvGames]

Make A Gas Station At Your Base So It Actually Looks Like A GAS STATION With Signs And Other Parts To Make A Real Working Gas Station

[@ChristmasTvGames]

#ScrapMechanicSurvivalMode #32

[@striderpup1169]

Good Idea

[@mantisdragon6322]

Thats what i did lol

[@chaspse2333]

the mechanicstation is allready a gas station without gas LOL

[@TheNuclearDragon]

Why Do You Capitalize Every Word? Good Idea Though.

[@StrixWar]

You could use a sensor and when the pole goes down it activates the pump. It would be more realistic

[@redpug5042]

usually the round weight is on the same side as the arm, that's because the oil pump actually pumps the oil on the upward motion, which uses the weight to pull, that reduces the strain on the motor.

[@agressively_wi7053]

Placing the bearring on the wheel at the 9 o‘clock position would give you an up and down swing from resting and also would use less material

[@Flooja]

for the looping option of the craftbot, you just have to put another chest at the exit, that way you don't need to upgrade the craftbot

[@mihneababanu4224]

Chest*

[@cadetkohr5508]

That doesn't work, because he'd still have to click the gas to start crafting it.

[@Flooja]

@@mihneababanu4224 thanks

[@michaellemmons4759]

Great video and fantastic looking pump! Couple of notes: level 5 craftbot gives you a faster craft time, not a loop. The loop is from actually having pipes/chests/etc connecting the craftbot output back to the input. Also you should be able to get pipes and such to connect the pumps and chests directly into your craftbot, at an expense of two fewer pumps!

[@HexaBurger]

Ur wrong. You just need any chest at the input and any chest at the output. You dont have to connect them together

[@michaellemmons4759]

@@HexaBurger right you are! Thank you for the correction. Linking the output back to the input just allows for easier use of the output in recipes (i.e. fast tracking scrap into tier 3.)

[@86niisan8686]

@11:25 the reason your not getting a PULLING motion is because your base (the 2 pillars on the left) are lower than the lowest point of the rod connected to the wheel to fix this, increase the length of the base (the 2 pillars to the left)

[@flamekingtagta5171]

Moobo I have Been watching your channel for over 5 years and you are the most creative KZbin I have ever watch

[@Y2Knostalgia2000]

You should make an oil rig base and a helicopter or boat in the middle of the water.. like so he can see this, such a good idea right? Edit: make the rig a boat so it can move from spot to spot and grab the oil from all the wells! And deck it out too!

[@index3562]

*Usa want's to know your location*

[@duke-vx8xy]

Too accurate USA didn't you know plants. Produce oil

[@ethanmelton927]

I know that is my home usa

[@decentdentex]

Lmfaao

[@hunterhebert6423]

USA USA USA

[@Pachi_Fuda]

rilly!!!!!!!

[@LGTheOneFreeMan]

Oldpost, but this is called a pumpjack. You don't need to worry about that much downward motion and there's dozens of pumpjack designs including a flywheel on its side connected by a web of rods to surrounding pumps. It' essentially the same as those old water pumps that you used to see on farms where you had to pump until it started drawing water. The idea is that there's a drawing motion where it's pulling out of the ground.

[@octodoodle]

holy crap is this channel is nostalgic.. I grew up with moonbo, crazy to see where u are now, so impressed :)

[@jdk0424]

That's cool

[@Croxy115]

Idk why but moonbo voice is kinda relaxing

[@glaxii1]

Kinda I guess

[@xiliam19]

True actually

[@superflypule4484]

True tho

[@codyhughes2222]

Ikr

[@healwix]

Great Video Bud! Love to see notifications from you on my phone! ... And PC

[@adam_dobe3581]

I just saw u in another comment in this vid

[@adam_dobe3581]

Well reply

[@dfuze1shot]

WOW...THE LAST TIME I SAW U PLAY THIS GAME WAS LIKE 2 YEARS AGO. ITS CHANGED SOOOOOOO MUCH!!!!!!!!!!!!

[@masterskywalker8445]

The best thing in moonbos vids is the intro theme

[@EDreyer]

Makes me feel so nostalgic after knowing it for about 4 to 5 years now.

[@xkryde]

*YAY YOU'RE BACK!! :D*

[@UltimatePerfection]

If you wanted to go really realistic, you could add a sensor that activates pumps if it detects the pump beam passing and deactivates otherwise. Then pumping speed would actually depend on how fast the wheel turns.

[@amessdolphin3855]

I wish I had someone to play this game with it's a lonely glizzy's life

[@scottmalcomson2181]

same

[@gabinocastillo2013]

same

[@niteh4wkk926]

@Francesco same

[@Lipnoxy]

Same

[@bigyeet8905]

Same :(

[@coyote8585]

That oil pumpjack looks very nice. Also, to get the continuous loop feature on your craft bot it needs to have a chest connected to the output. I don't think the craft bot has to be upgraded at all.

[@annaj2374]

for the loop action on the craftbot you only need to put a chest on the other side, no upgrade necessary. The oil pump looks nice, would be cool if the craftbot is integrated somehow.

[@Taloth1969]

You don't have to upgrade the craft bot all the way for the looping. You only need to add a chest on the other side :)

[@Milenos]

All those component kit wasted like that. feels bad lol.

[@EDreyer]

Correct, the upgrades are only for speed and number of slots

[@roguewipplash1]

Since the oil pump doesn’t go down and only goes up you could make the rod that connects the wheel to the “pump” shorter and start it in the middle right of the wheel rather than the bottom middle

[@uhhnoggy1839]

Moonbo, you don't need a level 5 craftbot for the looping. All you need is to put a chest on the output of the craft bot. A level 1 craft bot will loop with a chest conneccted

[@Cr4sHOv3rRiD3]

You can put pistons instead of those supports holding the hammer, that way you can adjust the height of the anchor point and make it goes both ways (down and up of the horizon line). :D By the way, you doesn't need to upgrade the craft bot to level 5, it can be level 1, to enable option for loop crafting you just need to connect storage on the output :D One tip, you also doesn't need separate storage for each input and output, just put every storage connected to the output and use tubes from them to bring resource to the input or you can put opposite, all storage on input and connect output with tubes :D That way you can group all storage boxes in one place and craft bot to another one :D

[@sntpluha]

16:31 the UAE after discovering that oil is valuable

[@cet_froz2249]

Cool

[@jdk0424]

I love the pump its amazing and I did not ecpect those poeces to be so big lol. I think the gas is for a rocket ship or something useing thrusters? Love the video and I hope you guys enjoys this and if you did enjoy please leave a like and leave a comment if you have anything to say or any questions bye. 😊 did I do good on outro?

[@jdk0424]

My comment is highlited

[@tooeehern5705]

Moonbo make a petrol station and automatic the oil into fuel. Also use a beacon to set the waypoint there.

[@Sonic-vt1py]

The reason why you aren’t getting any pulling action is because when you built the cross arm the flywheel was in its full downstroke position. If you attached it when it was in mid stroke you would get the pulling and pushing action but the cycle wouldn’t be as extreme.

[@punchygameing920]

When the wheel start spinning for the first time I was so overjoyed

[@outzymes3636]

MOONBO IS ALIVE WE MISSED U MAN :)

[@ArashiSlime]

Only suggestion. If you moved the wheel bearing to the right hand side point, closer to the edge, then you would have a greater up and down movement

[@ofenfrischeritaliener4441]

Are you going to make a giant car with 30 gas engines? XD that's why you need so much fuel

[@ericbonanno5214]

What i would of done for the oil pump is when it was still on the lift, I would of moved the cam arm to the 3 or 9 o'clock position so there it would be leveled then 6 o'clock would be fully up and 12 o'clock fully down. The A frame would of probably have to be taller so the increase stroke distance don't cause it to hit the wheel.

[@jdk0424]

?????

[@willewallew]

Me after seeing this comment: excuse me what the duck

[@laxen614]

u know the arm that goes from the wheel u need to build it on the side of the wheel or the "horison" point so there is both a upward and downward stretch :)

[@tedhead1042]

If you want the oil derrick to go down further, just extend the arm to the edge of the wheel.

[@risinivy]

Man, love your content so much, especially the little jokes that you throw in every now and then- particularly fond of the one at 6:20- and if I'm being honest, one of the reasons I'm looking forward to the next big update is I'm excited to see your response to it. ^u^ Keep up the amazing work Moonbo!

[@ccccool34gf61]

I didn't realize that this update came out and was wondering why my clock was gone. Good to know that my game isn't corrupt.

[@HexaBurger]

Craftbot has the looping setting unlocked without upgrading it. Just put chests in both input and the output

[@Jason-rr2cz]

You don't need a lvl 5 craftbot to be able to loop, you just need a second chest at the other end

[@frankthedsigner558]

Yeah, wanted to say that. He just wasted ALL of those component kits....

[@TheDistur]

Real cool build. Thanks for the video Moonbo.

[@BumRuler]

To make it go up and down you need to move the wheel backwards and connect to it more centered on the vertical

[@sovietscrapmechanic5058]

When your Moombo, you do it, or you overdo it and make it fancy

[@buddyransom2790]

I ask myself if he missed his pun "it is just as well" XD

[@andreamendes8034]

To make the boom drop below horizontal on each sweep, shorten your con rod. Also, try a shorter drop rod with a bearing at each end, attached to another purely vertical rod that rises and falls in two collars, just for realism. What do you think?

[@CamoKoopa182]

you know, I find those old-timey oil jackpumps to be very fascinating. But funnily enough I think they were also referred to as "Oil Donkeys." So, maybe, if you wanna go further with this idea, maybe you could style the pump to look like a donkey! Would be pretty funny!

[@BrianJ1962]

You're going to kick yourself, Moonbo. For the craftbot to loop, all you really needed was a receiving chest. Also, you could probably flip the chests over, with only 2 pumping into each, then pipe from the tops into a third chest - which you then have connected to the craftbot and finally out to a fourth chest. Not only would it make the station look more animated, etc, but with a flip of that switch and a few minutes wait - Gasoline without having to move a single thing ... other than the switch and grabbing the gas' itself :-D

[@SacredRealmOfTime]

i looked at the front of the picture and thought lets watch this

[@soldierhelm]

You could put pistons under the two supports that extend of the lift so those bearings are slightly higher causing a pulling action on its downward part of the rotation

[@maxwellgulyas6444]

To fix the pump problem make the rod that attaches to the wheel shorter so it is pushed up more. And I’m pretty sure that the next episode will be building a flyer.

[@S0renz]

I like the build but you could remove one of the vacuum pumps and connect it to a chest that is connected to a craft bot and have a few chests connected via each other or vacuum tubes set up as output. You'd get five oil every time and it's one to one for oil into gas with the craft bot making it on a loop.

[@korvoth4269]

Sensor on the bottom to trigger the pumps on each stroke would have been the topping.

[@ho_ody8492]

Moonbo: Builds a oil rig America: OIL OIL OIL OIL OIL OIL GIVE ME OOOOOOOILL

[@kalamatagames2631]

you can put some lights with (or switch) and when the storage is full the lights will blick and at the same time stop the fake pump, and you can see it from your base

[@healwix]

Awesome oil pump dude! Love seeing you build things that is animated, looks awesome bud!

[@cadetkohr5508]

I want to make this, but with the reciprocating motion start in the middle on one side so I get the up and down motion, and have the chest and vac pumps on the jack.

[@duke-vx8xy]

Aye one of my favorite undertale characters sup

[@cadetkohr5508]

@@duke-vx8xy Finished the oil jack!

[@Closer2Zero]

i think you should def hook those oil chests into the input of the craftbot for easy of use because you can set a full upgraded craftbot to loop and it will continue to craft cause itll continue to get oil incoming. Youd have to sacrifice 1 pump on each chest but thats and easy sacrifice to make and you can easily add a 3 chest to the system to still have your 6 pumps. Hell, you could even optimize the system to have enough pumps to make your oil income equal to the speed at which the craft bot crafts if its fast enough

[@dnt_alert5806]

You can fix the extension issue by moving the arm which is connected to the wheel up and to the right.

[@m2sp414]

oh hell yea

[@duke-vx8xy]

You are the grain of scrap mechanic

[@cfa_cns]

all you to do is shorten the arm connected to the wheel to see more pulling effect

[@KazooBird]

You need a chest on the other side of the craft bot to make the loop effect since it would auto collect into the chest

[@indisputablefacts8507]

I like the build! I just wish that the devs had been a little more inventive with this change to make it so that inventing a new contraption was more than just aesthetic.

[@ryanpatterson64]

If you make the starting position on the right side of the wheel it will be able to go up and down properly.

[@stevenincejr4300]

Thats what drive the pump the about usely down 20.000 feet looks great

[@jasonbargy4905]

Keep pumping that oil. You oil baron. Yahoo!

[@declanobviousthinking901]

I like it when mumbo said oh ge- and it cuts 😂

[@FreezingHot]

OK Moonbo I have an idea. It's half cool half stupid but hear me out: make a sensor at the bottom of the shaft that goes down and connect that sensor to the pumps. every time it goes down it pumps oil. I don't know how real oil wells work but it seems like they work like that right? idk it seemed like a cool idea but not very practical so that makes it stupid :D I mean you can add 2 options one sensor one automatic. it's essentially infinite oil either way. anyways love your vids keep up the great work!

[@Vanish-vt4sg]

To be more realistic you should have put a sensor at the bottom of the pole to trigger the pumps.

[@Bonamy_Bonaparte]

You actually don't need it to be level 5 to loop it, just put a chest at the output and you can loop it at level 1, no component kits wasted

[@JerryGaming1111]

The thumbnail looks AWESOME

[@hadinajjar9800]

To get the full rotation you have go to shorten the arm that attaches the wheel are main arm

[@nighthawkgaming1962]

Could make a line of chests that leed into a craft bot that is making fuel on a loop

[@jdk0424]

Good idea

[@milkisbannned]

looks very cool!

[@meowman7767]

Make an truck with a tank on the back so you can get in the tank and put the chests in the tank

[@rayd_galactic]

It would be cool if u made it so observers detect when the pillar goes down and then have the oil pump when it’s down

[@SuperPeter05]

Changing to pipe for the drill end of the oil pump would add to the look I think.

[@mantisdragon6322]

You dont even have to upgrade the craftbot, just put an output chest and you can loop the crafting

[@keatonbeal3902]

I thought about getting the game tomorrow and I was hoping to build a cool mobile base and be able to extend a arm that has pumps and just get oil but I was wondering if the pool started to drain or something but it seems like not so more oil for me

[@Schmeedle]

Everyone else just put chest and pumps but now I want mine to look like yours

[@Knaty]

Amazing Build

[@thestignl1153]

19:20 Mine already has the repeat thing at level 4. Another ‘patch’ on this update?

[@Moonbo]

Nope, I just haven’t played in a while and forgot that you only need an output chest to loop crafting!

[@superflypule4484]

@@Moonbo i think the gas expensive thing your gonna use the gas is a flyer

[@thestignl1153]

@@Moonbo Oh yeah that is possible too 😆

[@HexaBurger]

You can also loop on level 1

[@noelbeato5281]

I wonder if you put pistons holding up the jack that go down in sync with the wheels motion so that you get that dip

[@RogueAero]

I could finally build my flying fortress if I still played lol. Supposed playing because my main save corrupted and even my backups weren't working. I just couldn't bring myself to farm for everything again.

[@jdk0424]

😢😯

[@turbocrash9373]

Nice Pump! Could you make a big and heavy allrounder Offroader with some kind of defense and alot of space for Chests and stuff like that? i mean fuel is no longer an issue ;)

[@gokselaras9002]

İf you attach the first metal line (that going up) to the right or left of the wheel instead of bottom, you can solve your problem. You're welcome.

[@citruscampbell]

Moonbo is just the mumbo from minecraft but in scrapmechanic XD

[@Mikethefallenlegend]

Ooh that's got to hurt for the craft-bot part

[@glaxii1]

That’s super cool

[@mozeskertesz6398]

Make a self-propelled oil processor, and a tank car for the truck

[@fancytrash]

The backround music in the middle of the video reminded me of modnation racers, best racing game.

[@dragonstone9415]

You need a chest on the output part of the craft bot for the loop effect

[@panda-_-dreamer2.030]

Maybe make a pipe from one of the chest to a gas station where gas crafting is automated.

[@sumaiyakausar9482]

Now this is my type of guy

[@MC-ed1nc]

Moonbo = Mumbo Jumbo

[@gjs9871]

Put the craft bot underneath the oil pond and put the gas chest in the walkway.

[@Zephoxi]

That looks great lol

[@desktopantec2290]

there should be snow biomes in scrap mechanic that have ice and everything