THIS Mod Is Better Than A WaveBird Controller!

[@alexattewell8607]

I need to stop watching these episodes because I keep spending money on these mods 🤣

[@TheHatMan69]

Cheers to that! XD

[@MachoNachoProductions]

The speed at which these mods are coming out is staggering.

[@hopperhelp1]

Hahaha yep. Same.

[@TheHatMan69]

@@MachoNachoProductions it's a blessing, certainly. 😍

[@kingcheerio8558]

Every single time lately that I think I've finally gathered all the parts I need to send out my old GameCube to my solder guy to build my ultimate plug and play GameCube another awesome mod kit comes out, it's much less frustrating than it is awesome though

[@NineLivesEditing]

I love the modding renaissance we are in. Its like having a second childhood

[@Zelielz1]

Well, we are all grown ups now, and cleary love to spend money on these things haha.

[@JozefLucifugeKorzeniowski]

I don't mean to sound bitter, but I realized why I, personally, found myself looking back to old games I never experienced and I think alot of people are like me; it's because modern games are very underwhelming in a variety of ways. GaaS, Free to play, Always online drm, games with on disc dlc, Nft Integration, huge day 1 patches, and gacha games are making me realize video game's glory days might be in the past. I disagree and refuse to support all of those modern video game conventions. you'll notice none of these things are "make a good game"

[@michealfunickrr3717]

@@JozefLucifugeKorzeniowski i quit updating my ps5 at 4.50 because i knew where we were headed. i've purchased tons of games and have desireable updates on PSN and xbox. dlc's and day 1 patches without the continued bloatware patches for Mass Effect 1 remake, COD-COLDWAR-VANGUARD-MW2019 oooooooon -> 1.15/1.015.000 BEST GLITCHES!, hitman 3 1.04/1.004.000, GTAV 1.37, Outriders 1.05/1.005.000, GTA Trilogy 1.01/1.004.000 every game mentioned has all available dlc purchased... xbox is way easier to transfer game versions i mean copy all game and versions as long as the person purchases said game(s) playstation we're wating on being able to. IMO it's inevitable as sony must fx the internal SSD flaw that it'll eventually fail from normal use.

[@michealfunickrr3717]

i can copy xbox ssd as many times as i want and sell it. i've tested this process and it does not affect my offline xbox as i have two xboxes and i've already copied the ssd. i am ready to let others enjoy the fine COD glitches on 1.15/1.015.000 *you will need over 160gb free on your stograge device or COD will return an error and fail to boot properly. **remember this so you don't accidentally delete it thinking you need to reinstall COD...

[@michealfunickrr3717]

@@JozefLucifugeKorzeniowski i bought 2 Bluretro and 5 Memcard Pro GC's. best value for shipping to USA.

[@patrickwalter8175]

Every single time, no matter how often I watch your intro, I get goosebumps - It's such a great intro! I'm a huge GameCube fan ever since - Great video as always!

[@MachoNachoProductions]

Thank you Patrick! Glad you’re enjoying the videos!

[@briangilmartin662]

Apart from the ease of installation, my favorite fact about this mod is that you can still use your wired GameCube controller. You never know when your Bluetooth controller might need a recharge at an inopportune moment 😅

[@qwertyazful]

This mod plus some wireless gamecube styled controllers (like the ones from PowerA) would be an incredible combo

[@LsAdventurer]

Or maybe a wireless mod for the original GameCube controller.

[@AimForTheBushes908]

​@@LsAdventurer🤯

[@TheRetroBristolian]

I've got my laser bear BlueRetro mod with a PowerA bluetooth switch controller and I've been using it for 2 days - it's pretty fantastic, few teething problems, but feels really nice at the moment!

[@timhouston8007]

Power A's triggers aren't analog though. If you like the the actual gamecube controller the only option is still a wavebird. Otherwise you lose analog control on the triggers.

[@godminnette2]

@@timhouston8007 This is always such a bummer to me - I want a fully modern controller in the GameCube layout with analog triggers. Hopefully made by 8BitDo, as their controllers are excellent quality compared to other manufacturers.

[@VIRACYTV]

I have so many questions. *Is rumble supported on all questions? *Are there any known controllers that don’t work? *Does the sleep function cause the disc to stop spinning entirely? *Or Does the sleep function only work when using a game loader (GDEmu, Swiss wPico, Swiss wSD Gecko) *Does the GCDual recognize this as a valid controller to modify the options?

[@stephenshelottiii3272]

Yet another amazing video. This brings the GameCube up to date in the best ways possible. Including the battery holder shows how much Greg cares about gaming. All these wonderful mods make it an exciting time to be gamer.

[@jigzyonline]

The battery holder made it an insta buy for me.

[@micksterminator3]

I always wondered why a 3rd party wavebird receiver hadn't been made. This guy has answered our prayers

[@Kara_Kay_Eschel]

I had a mini wave bird from madcatz.

[@scottyparsonas6018]

Tito thanks for keeping us up to speed with the mod scene. Especially the cube. I really enjoy the content on your channel. Keep up the awesome work!

[@MachoNachoProductions]

You’re most welcome Scotty! Cheers!

[@gamertoon8230]

This console mod looks awesome. With this mod it’s now possible to pair the official Switch online Snes controller to use with the game boy player.

[@MachoNachoProductions]

It’s amazing!

[@tboatrig]

That's a great use case.

[@apollovi]

My funny way of doing that up until now was to use a Raphnet GC to Classic Controller cable, then sticking an 8Bitdo classic controller wireless adapter to the end of it. It actually works with GameCube! But this will be a much more elegant solution.

[@ButtholioTheGreat]

I've been holding off on the Pico mod because I already have a GCLoader, but this is the perfect excuse to buy another cube and do both mods.

[@YoshTheIncredible]

Why?

[@Covnam]

Amazing mod, especially for being solder free. I wonder how those switch GC BT controllers are on latency. I was surprised to see PS4/5 being so low with everything else being twice as slow or worse

[@pratikpramanik7782]

Needs an fzero test

[@ivey77426]

Great. DarthCloud puts a lot of effort in BlueRetro project, it's a joy to see such massive mods come into life. Personally i'm using blueretro for ps2 wich i've built myself using esp32 dev board. The best thing about BlueRetro is that if you don't want to spend money then this mod can be super cheap, or contrary expensive and elegant like this GC kit. Best of both worlds and anyone can be happy with it. Also i want to add that esp32 board is very popular novadays in retroscene, but most of the devs involved (unlike DarthCloud) do not make it opensource. For example both Saturn (Fenrir 20pin) and PSX (Xstation) ODE's use esp32 and in theory could be DIY for just a few bucks, but they are not. Sadly.

[@MachoNachoProductions]

I understand from the developers point of view I think it’s good to not open source, sometimes so they can be compensated for their work. I hope once they’re done supporting their projects that they will eventually make it open source so that the work isn’t lost forever.

[@stephenshelottiii3272]

While this kit may seem expensive I really think it’s a bargain. Buy the time you add up the cost of the esp32, battery mod, led light mod, solder, flux, wires, and time involved to install everything properly it really adds up.

[@haloharry97]

@@stephenshelottiii3272 I got it just for the battery mod and remote shutdown/restart

[@mjc0961]

@@stephenshelottiii3272 Yeah, I built a BlueRetro adapter for PlayStation 1 and 2, and was surprised at how much money I put in to finally get it finished and working. It's not cheap. $100 for this kit looks like a bargain to me too.

[@R1SKbreaker]

@@haloharry97 Isn't that battery for the features of this mod? Or is there one of those batteries in stock systems that are long dead that this essentially replaces?

[@hudsonball4702]

I got a GameCube off of ebay with a busted disk drive a couple of months ago and I plan on Modding it with both GC Loader PNP and this Blue Tooth adapter.

[@Falcon5698]

gamecube getting tons of love lately. New and improved way to run swiss with the pico chip, and now bluetooth controller options. Makes getting into the gamecube much more affordable, and if i already didnt have a wavebird id say just spend the extra 20 to get this kit.

[@tommyboates42]

So excited to see this mod! I've been following BlueRetro for a while and love the idea so much. Maybe we'll get more adapters in the future for other consoles?

[@Dhekranh]

I've been waiting for this for so long! I mean, I know most people just play their gamecube games in their wii, but I never got a wii, nor did I want one. And now being able to play melee and other games in an actual gamecube using my ps4 controller? No cables? No AA batteries? BUT ALSO RUMBLE?! This is a dream.

[@LsAdventurer]

It's so cool how many features it has. Definitely going to try this mod when I get a GameCube!

[@draconic5129]

This is such a cool idea although I think you would also be cool if they offered other solutions such as a Bluetooth dongle for controllers, that way people can still use Bluetooth controllers with their GameCube even if they don't want to modify it.

[@matt123337]

There already are, you can wire up to 4 controllers to a single esp32 devboard, or even have breakout PCBs (let's you carry the esp32 module between systems, so you don't need to re-pair your controllers if you use it on say your GC and SNES). It can be a tad costly, I ordered parts for 3 of the main PCBs, 3 adapter boards for GC, some LEDs and resistors, and resin 3d printed shells for all 6 (well 10 of each of those, same cost as 3). All in it was about $230-$250 us. Probably a lot cheaper if you 3d print the cases yourself, but my printer was down

[@benemery1644]

The 5V DC pin on the controller ports would make it stupid easy to do that because it wouldn't need an external power source

[@boydpukalo8980]

Awesome video and thanks for sharing this modification. I will be ordering 2 kits, for my US and Japanese DOL-001’s. I previously ordered the ODE SD card mount from this company and had a good experience. Thanks.

[@tommy6934]

Oh man, this is awesome. The price isn't bad at all. One thing that would be cool is if they matched the color in the ports for like player 1 2 3 4 like they do on the playstation controllers. I understand that not everyone would be using the playstation controller but the color matching would still an awesome touch.

[@SypieTV]

I am thinking about RGB Like you can Choose the colors for each Player and the "ON" LED thats will BE nice.

[@Madblaster6]

what an amazing product. Simple and brings the GameCube to 2022

[@MachoNachoProductions]

Totally agree buddy!!

[@muhammadazim4563]

the most awesome mod is the sleep wake function making it feels like modern console

[@WillThat]

Did a diy BlueRetro for my GC a year or so ago. Glad it's starting to catch on.

[@BrianBorkowski]

I wanna try to use the Exlene GameCube controller for the Switch with this mod. That controller has analog triggers, rumble, usb-c and charging. Hopefully it could be the ultimate wavebird replacement

[@bland9876]

Wonder if it would work with the strange hyperkin pro cube controller that only syncs with the Wii u even though it came out after March 2017 (that's when the Switch came out)

[@Festivus_Miracle]

@@bland9876 I was actually just thinking that, I got that controller last week and was surprised it didn't connect to my laptop when trying to pair

[@bland9876]

@@Festivus_Miracle there is a driver you can try to get official Wii U controllers working but idk if it will work on third party ones.

[@SkitaTeachYou]

I love this mod! It’s just awesome!! I can understand the price and it worth it but I really can’t spend that much on a old console when i can just plan over a emulator already with ps4/5 controller. But if I had enough money I would buy it in a instand! :)

[@ChickenJoe2042]

Just pre-ordered it. The Gamecube has and always will be my favorite console

[@Karzas]

Mine came today - installation was very easy and everything works perfectly as intended! Definately worth the buck! :)

[@sonofskywalker3]

I keep watching this video waiting for my preorder to ship!

[@ratykat]

Another week another top teir video, I know I say it most weeks but thank you for the videos Tito! I can't think of a more perfect mod; no cut, no solder, good quality, and more functionality than "just" Bluetooth. It might seem a little pricy, but if you're in the market for a wavebird this is a genuinely exceptional alternative. The team behind this should be very proud of what they've created here.

[@tommy6742]

You can always just shorten the antenna wire yourself with a little bit of solder work to reconnect the ends and use heat shrink to protect the joints.

[@mathieuberthalay21]

Thank you for your video

[@SamuraiNetwork]

Congrats on 100k subs my guy

[@MachoNachoProductions]

Thank you 🙏☺️

[@vaderexmachina]

Good to see this follows the Wii's player color code where P1 is blue, P2 is red, P3 is green and P4 is yellow.

[@Fireshot844]

I have been tinkering with options for this for awhile. This is the greatest thing we could have

[@Yomamura29]

If I have that mod and a gamecube, I will take it a step further by drilling the indicator dots and put the LED there. Thank you so much for this wonderful video.

[@KibethSE]

Amazing to see how easy the install will be. Excited to order one.

[@fabricatedego]

Just got this in the mail yesterday. installed and looking forward to giving it a go

[@Punmaster9001]

While justifying the purchase of something like this comes down to "Cause it's cool!" The easy install, the versatility, and the fact I could potentially use a Switch Pro Controller or even Joy-Cons (assuming that's in the github) I could finally play GBA games with a better feeling controller than what I use now! I love it!

[@ChickenJoe2042]

Little follow up, just installed it and I absolutely love it

[@apollovi]

This is absolutely amazing! A few months ago I was on a quest to add wireless functionality to all of my retro consoles. Almost every one of them (even the more obscure ones like Neo Geo and PCE) had a plug and play adapter, but GameCube strangely was missing an easy solution. BlueRetro existed but it was only an open source DIY solution. There wasn't anything really commercially available. But now this kit comes along and surpasses all of my wildest expectations. Fully integrated bluetooth in a drop-in kit and packed with other features. I can't wait to get my hands on it! I would love to see if it pairs with an 8Bitdo GBros adapter. That's kind of the dream, to have an OEM controller playable wirelessly just like a Wavebird, but with rumble!

[@mrmxypltk]

I'm like 90% sure the gbros is listed as compatible in a Twitter thread about it! But of course, I can't seem to find it right now.

[@fraggle200]

I'd guess it was missing a solution you were after as there's Wavebird controllers which has probably meant it's not been much of a priority for anyone. This does look great though.

[@RastaJediX]

@@fraggle200 was coming to say this.

[@RastaJediX]

Am I not the only one that had MAJOR input delay with the GBros adapter (used w/Switch)? (I haven't used it since 2019 maybe so perhaps fw updates fixes this... But has anyone done lag-testing w/GBros?

[@Septer_Sever]

Man, will there ever be another renaissance for vintage gaming like we've had the last 5 years?!?! The retro tech is coming nonstop from these awesome engineers in the community 👏👏 What a time to be alive!

[@MachoNachoProductions]

Totally agree! Everything is rapidly evolving! What a time!

[@NerdyWeaponXGames]

Congrats on 100k!!! So happy to see your channel blossom, you’ll be getting a KZbin plaque soon enough 🙌🏻 Glad I was here for the ride.

[@eathenalexander2836]

I swear. If wasn’t for you. I wouldn’t have any clue about these amazing mods . Your channel is very underrated. Keep up the amazing content Tito👍👍

[@royalace760]

This is amazing! Ive been debating on whether or not i wanted to invest in wave bird controllers but this solves that problem.

[@alfiegordon9013]

Great video! And congrats on the 100k, you more than deserve it! 😃

[@MachoNachoProductions]

Thank you Alfie 🙏

[@Evercade_Effect]

Mod is amazing and was geeking out over the features.

[@SYIBOI]

This looks really cool, I probably will get it just for easy wireless controller connectivity at some point but I need to take it easy for a bit haha. The fact its such an easy install too is just so wonderful I cannot express how elegant that design is. The fine folks who designed this are some really great engineers I'll tell you hwat.

[@julien2983]

This looks awesome, definitely installing it eventually

[@crystalchaos462]

My only gripe is the sleep combo is longer than the Konami code. Solid drop in kit! I love it!

[@MachoNachoProductions]

Haha true!

[@BigJoker]

Wow what a product! The price tag seems fair given what you get. The fact that it's plug and play alone gives it a high price tag, but then when you went into all the quality of life features, it's totally worth it. Just when I thought my cube was fully modded! (I feel like I just commented this on one of your videos)

[@Ragnorok64]

Thanks for this video. I've been seeing this pop up on twitter but wasn't entirely sure what its capabilities were.

[@MachoNachoProductions]

Glad you enjoyed the video!

[@JB2FROSTY]

That's incredible honestly.

[@MachoNachoProductions]

I think so too 👍😁

[@bradwinter7028]

This is SO SICK! and as always, top tier quality on your videos, CONGRATS ON 100K!!! You deserve it.

[@MachoNachoProductions]

Thank you so much Brad 🙏☺️

[@ayellowbeard]

Just pre-ordered and am stoked for November's release!

[@aman1632]

Dude. Your channel deserves not 100k, but a million subs. Quality content as always. Plus, pre-ordered the unit. Can't wait to drop that in. Next do a video of Bluetooth modded GC controllers. Me and the boys throw down massive Strikers tournaments and the 10 foot cables are always a pita.

[@smithincanton]

let me tell it to you this way. I paused the video within the first few min to go order one! I can't wait to get my hands on one!

[@mattakadanja]

Pre-ordered mine and subscribed. Love these mod videos.

[@MachoNachoProductions]

Awesome! Thank you so much for the sub 🙏

[@Tk4Plz]

Congratulations on 100.000 subs! Started watching when you had like 10k but this is so nice to see 😁

[@MachoNachoProductions]

Thank you Thomas 🙏☺️

[@Eugenes84]

Great work as always with the video product and the information. What’s an incredible product too. The retro gaming scene keeps evolving for the better.

[@Aimela136]

I feel like the the LED colors should rather be red for player one and blue for player two, to match the multiplayer colors that multiple GC games used. Outside of that, I so want one of these now.

[@JayBoyModz]

Congrats ton the 100k man! 🔥🔥🔥🔥🔥🔥

[@SunkythePootis]

The internal battery in my Gamecube has been dead for a long while, so this is right up my valley to easily replace that with the bonus of being able to use controllers I personally prefer over the Gamecube's.

[@MachoNachoProductions]

Awesome! It’s definitely a great kit!

[@MayorMori]

Awesome video, as always. Do you know of any mods that allow you to invert the Axes on a Controller?

[@MrHack4never]

I would have liked an USB port for wired controllers like fightsticks or steering wheels, but that might not be possible with the existing hardware

[@AlanLopez-rd6fj]

been watching it on twitter. so glad it was finally put up for sale. $100 well spent. makes it easier to play gamecube on a projector since i wouldnt have to worry about cords.

[@anasqahar5000]

I wanna appreciate your efforts on your videos and Congratulations 🎊 on reaching 100K TITO Much love Bro 💙

[@MachoNachoProductions]

Thank you so much 🙏☺️

[@zandatsu07]

Congrats to 100K! You really deserved it. I remember watching your first videos with a less than 5K subs

[@somathebest]

I love how HW modding is rising up per modern and retro consoles. As always, Like from Spain!

[@MachoNachoProductions]

Thank you Martin 🙏

[@elsorino]

This is a really well-done mod wow

[@jacobhauck2192]

Need to ask, what’s the rumble situation with this mod? Does rumble work with this option or does the Bluetooth connection not allow it?

[@thetimelesschannel4810]

This is amazing and I'm 100% on board with this so excited The only thing that's kind of bittersweet for me is I bought a ton of wave bird controllers and as we all know those things are not cheap but this is a great mod and thank you for sharing I'm just getting into this whole entire community and I'm a complete noob I'm not good with computers whatsoever so thank you again for this

[@mattfisher1916]

Looks perfect for the new wireless GameCube style controllers made for switch.

[@roflBeck]

I'm not keen on taking my Gamecube apart, but this is so damn cool! I'm kinda tempted.

[@shazmanbound1496]

You have to take apart your GameCube as well as any retro and modern consoles. Why? Because you need to really clean them inside specially the fans. Spraying some pressure air into the consoles open vents does nothing but to push more dust into them. I recommend opening your console for cleaning once a month or every two months. Also get familiar with soldering, specially on retro machines. They will need repairs eventually.

[@ja.935g67]

About time to get this Silver GameCube out of the freezing shed! Just got mine in the mail, revolutionary mod no cap

[@DarkBowser64]

The fact that this replaces the original controller board meaning I don't have to solder on a new real time clock battery is great! My GC's battery is dead as a doornail and only advances while the system is actively powered on, unlike the Wii which takes the residual power from the PSU to prevent having to take power from the CR2032 battery. The Bluetooth controller functionality is also really well thought out. It's a tad pricey for my budget but this is definitely something to think about for long-term usability of the console.

[@KristofferEk]

you should always start a system while its still open so you know it still boots and posts properly just to be sure especially if you have done soldering. that being said this would be a great first mod seeing as its fairly easy to instal.

[@andreamitchell4758]

FW update suggestion , make the controller port LED's match the lights on the PS4/5 controllers so player 1 has blue lights on both the controller and the GC controller port, player 2 has had red lights on both the controller and the GC controller port etc. seems so immediately obvious ,I mean assuming the controller port LED's are RGB, at that price I would hope they would be

[@dwightdixon8508]

Very cool now I just have to decide which of my GameCube’s to add this on. “Simply incredible” says it all

[@NLuKa420]

Imagine this kind of update for systems that only had two controller ports but supported multi-taps. Imagine four M30s seamlessly connect to your Sega Genesis after you've inserted NHL 94 in the cartridge slot. Racing wheel support would be a game changer for experiencing games like Gran Turismo 3 on PS2 on original hardware. At $100 a piece, I could see myself adding this to every console I own, honestly. Modern quality of life improvements like this are underrated on home consoles.

[@AdamHulbert]

Pre ordered as soon as I watched this video. Also looking forward to playing the gameboy player with a PS4 controller as its got a much better D-PAD than the Wavebird.

[@numberonefanofa7x]

Amazing mod! Unfortunately, I prefer my modded Wii over the GameCube. Otherwise, I'd be all over this

[@shaneclack3234]

I cant believe more folks aren't talking about one of THE biggest pros to the BlueRetro GC adapters... Guys, this thing pairs with Bluetooth keyboards and works FLAWLESSLY with Phantasy Star Online!!!! No more need to buy that chonky $300 Ascii keyboard controller!!!!

[@frankmoolah]

Recently purchased another used GC console due to getting a good deal on it which I originally intended on applying the Pico mod to, but this additional BT mod came out of left field which took me by surprise. When this finally comes to market, I will definitely be in line for one, but not at the starting price of $100. H3ll, I only paid $65 in total for the GC with 2x add'l controllers and a Wavebird missing the receiver.

[@mattakadanja]

You’re not paying for parts alone. People work hard to develop these mods, bring them to us for purchase and continue to support and update them. That’s what you’re paying for. And a wave bird without a receiver is a decorative paperweight.

[@frankmoolah]

@@mattakadanja there are other alternate methods to achieve wireless connectivity using a GC controller on a GC, and you can spin it however you want, but in my opinion spending/investing $100 on said mod to use on a used, 2nd-hand GC I don't think is a good use of my money regardless of what the mod has to offer when there are other superior modern day methods to play GC games which are more easily practical to employ and offer better quality of life improvements. I'm very aware that my Wavebird is useless w/o a receiver which was only secondary to the point I was making in my original comment since it was bundled in w/ the used GC lot I purchased, but you don't have to sound so much like a shill 😅😆😂

[@chepossofare]

I would like to point that on twitter there is a discussionfor integrating the BlueRetro with a Raspi Pico, so you can obtain BT controllers and homebrew loading capability.

[@KyleBrinkerhoff]

Super clean! Man, I bet laser bear could also make that esp32 also handle picoboot duties

[@Alex13mod]

I got mine pre ordered :-), great video brother

[@MachoNachoProductions]

Nice!

[@slappymcphee]

It would be great to see you referencing the 8bitdo Pro Plus line, rather than always the PlayStation controllers that you've been using for your test purposes as of late. Would just be great to know what your thoughts are with those and I believe that those are actually more likely to be used. Just a thought. As always, a very well put together piece of content!

[@MrMegaManFan]

Okay after watching this video I'm sold on the idea.

[@LLCJccxl]

Awesome i hope this is coming for the classic xbox as well.

[@MachoNachoProductions]

That would be amazing!

[@JamesDziezynski]

This is amazing! I don't have to hunt for that expensive Horii SNES-style controller from my GB Player games!

[@GekkoGeemu]

Color assignability would be pretty rad on the ports. Then you can have them the appropriate color to match the PlayStation LED.

[@zaqueroberts1975]

I like the sleep/wake function. It would be dope if it had built in rf receivers too so you don't need the dongle to use a wavebird.

[@Mrx7tloma]

I’m so getting this. I been running the emulator on my pc but I hate the audio sound on some games. Can’t wait to be able pair my newer switch controllers to my GameCube.

[@HoLeeFuk317]

The sleep function is the main attraction for mel

[@Grooveraider]

GOODBYE EXPENSIVE WAVEBIRDS ! HELLO BLUE RETRO ! 👍

[@HD_8]

I wish the PS2 had the same level of awesome mods as the GameCube has.

[@andreamitchell4758]

I have to wonder if we will ever see an open source solution like this that uses a pi pico W as an all in one pico boot,LED mod and bluetooth solution , maybe the original GC controller port could be used and someone could develop a passthough ribbon cable connector board for those who won't want to solder. I like the idea of using one pi pico to control pico boot, LED mod ,and BT mod and keeping the original controller port board intact I mean once the pico W finally gets the bluetooth support from rpi foundation implemented.

[@johnnyreiling5633]

Love my modded GC. Can’t wait to put this bad boy into it and have a more modernized GameCube.

[@burnthetrolls5971]

This great for me since I have a wireless Nintendo GameCube controller for my switch now I can use it for my actual GameCube like the game Gods intended