Nice. I was one of the first people to try out recycle in the studio with an Akai sampler whilst working with Carl Cox at his studio in Horsham, it was a revelation when it first came out for sure. Saved us so much time.
@Arc.hitectureMusic Жыл бұрын
That’s is quite the awesome story. I would imagine this was around the time of original Recycle when Steinberg was still the distributor of it?
@billB101 Жыл бұрын
@@Arc.hitectureMusic Pretty sure it was. I used the Propellerhead version a lot later on. Great piece of software at the time though, proper gamechanger compared to working in those little Akai windows. ;)
@Rockandrollaz-d8l Жыл бұрын
Wiki comment thread right here.
@koncreteto27585 ай бұрын
BillB101 ur full of rubbish
@danielortizdecaracas Жыл бұрын
really cool collection of vintage gear
@Vesalempinen8 ай бұрын
And if you are missing the SCSI, you can do the same transfer with Recycle! Using Midi transmission, but It will take about 5 minutes when transferring Breakbeats.
@MarcS4R Жыл бұрын
awesome , what a flashback. i remember that software
@ruxtonau Жыл бұрын
The removal of SCSI sending breaks from Recycle is so annoying. Having some modern software that parsed the breaks and allowed me to SMDI send them would be a god send.
@mbrombert4 ай бұрын
Wonderful.
@albertrynkowski3599 Жыл бұрын
İ still use recycle 2.0 with wavelab with my samplers (e5000 ultra, cd3000 and Yamaha a3000 V2). Great software! İf you search for some old sample pack of sort hook me up. İt's possible that i have it here on mu shelf. Happy sampling!
@totigerus4 ай бұрын
Is the G3 running the Abelton as well as the Recycle?
@DerDanko3 ай бұрын
Around 1995/1996 I made the roundtrip of vocals, recording them into the Akai S3200XL, transferring over to Recycle, had it chop it up to every syllable then return them to the sampler where I normalized them all to full scale. This made for some very intelligible vocals, which was needed considering the track was a 172 BPM Happy Hardcore song with pitched up vocals called Starchild. kzbin.info/www/bejne/sInMXmOdqNl-o80
@TerminalMeltd0wn Жыл бұрын
Awesome Video,would like to see more tip n tricks with recycle and the sampler
@Arc.hitectureMusic Жыл бұрын
Any specific examples?
@TerminalMeltd0wn Жыл бұрын
@@Arc.hitectureMusic how you work with keygroups and setup for doing pitch snare rolls etc for jungle! bit like what i hear on 'Dread Bass' - Dead Dred
@FSK1138 Жыл бұрын
it was all about workflow..... i miss my ensoniq eps
@violentchimp57556 ай бұрын
This is how we do it ;-)
@benlambregts4214 Жыл бұрын
Nice... but: Explain the black S3200 in your rack as well...🙂
@robinweber964023 күн бұрын
It's very rare. That's it. That's the explanation
@mrrothers3024 Жыл бұрын
Have you tried it with an s1100, all the samples sent via SCSI are maxed out to 10db on the s1100 output page, have to adjust each sample back to 0db , bit annoying not found a way round it , nice vid by the way👍
@CC-fi3pp7 ай бұрын
Does Recyce 2.0 do midi dump aswell???
@Arc.hitectureMusic7 ай бұрын
It does, but it’s slloowe
@mantax556 ай бұрын
What other samplers does this work for?
@Arc.hitectureMusic6 ай бұрын
From Sonicstate AKAI S1000, S1100, S2000, S2800, S3000, S3000XL, S3200, 3200XL, CD3000, CD3000XL. E-mu EOS, ESI-32, ESI-4000, Emulator-IV, E4K, E4X, E4X Turbo, e-64, e-64fx, e-6400. Ensoniq EPS, EPS-16+, ASR-10/ASR-88. Kurzweil K2000, K2500, K2600. Roland S-760. Yamaha A3000 In addition, the following generic sample formats are supported. Note that none of these support receiving samples. Generic SDS Samplers Generic SDMI Samplers Extended SDMI Samplers
@edglue61388 ай бұрын
How do you link to 2 computers?
@Arc.hitectureMusic8 ай бұрын
Ethernet
@theblowupdollsmusic Жыл бұрын
Really Nice setup! What monitor are you using?
@Arc.hitectureMusic Жыл бұрын
The Ultrawide is the Dell U3417W
@MLochMusic5 ай бұрын
Hi, do you know if this works with the S950?
@Arc.hitectureMusic5 ай бұрын
Not directly.
@mcj2k Жыл бұрын
Could watch 6 more hours of this tbh. Have you thought about doing any streams from the studio?
@Arc.hitectureMusic Жыл бұрын
If the demand is there I am considering it
@encapsul Жыл бұрын
What about the transfer between those old mac and newer ones ? Do you edit your sample on the powerbook G3 ? Thanks !
@Arc.hitectureMusic Жыл бұрын
All the sample editing is on the G3. Unless I’m messing with something in Live I just sample it in via analog inputs, then scsi edit using the G3
@trakliteproductions Жыл бұрын
Peace. Where'd you get an SSD for the PDQ?
@Arc.hitectureMusic Жыл бұрын
eBay. It’s a Pata SSD
@Vibration_Transmission Жыл бұрын
Hey man nice vid, what is the spec/pins on the scsi on back of the powerbook? im trying to find a small computer to use to save and chop on for my akai samplers via scsi would all the powerbooks work? Thanks!
@Arc.hitectureMusic Жыл бұрын
Lombard, PDQ, and Wallstreet all have a HDI50 port which allows for native Mac scsi support. Older models also have scsi but will run slower.
@Vibration_Transmission Жыл бұрын
@@Arc.hitectureMusic Great! thanks for the reply, so would I just need a HDi50 (did you mean HDI30??) to SCSI lead then? or any work around with modern macs? Black face 3200 looks dope btw
@Arc.hitectureMusic Жыл бұрын
@@Vibration_Transmission no Mac past OSX 10.0 works with SCSI and samplers in my experience. Just need to find a HDI50 to SCSI DB25 or Centronics adapter.