This Small Gaming PC turned out amazing!

Today we put the thermals of the Cooler Master NR200P Max to the test... How will the 9900k and RTX 3080 survive??
Learn more about the EVGA Z20 Keyboard at www.evga.com/p...
Get your JayzTwoCents Merch Here! - www.jayztwocen...
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
SUBSCRIBE! bit.ly/sub2Jayz...

[@Jay_the_Caffeinator]

No matter what, I LOVE Phil's montages!! Yeah the upgrade and building are cool. But the montages are where it is at.

[@deminybs]

maybe if he didn't use terrible "music" it would be the best part. should just have silence ...

[@stove115]

really? I think it fits well. I liked this one especially, had a cool disco vibe.

[@mgarre24]

Feels just a little bit like Computer assembly porn. LOL

[@vasocreta]

@@mgarre24 I mean...that's kind of what it is, though, right? LOL

[@YassirAlSaffar]

We need a video on how he makes those. Just simple, cool and entertaining.

[@ASOTFAN16]

I actually really like this PC building montages. Something different than the usual time-lapse or the "look i'm building this PC imma put in this component now then that component" sort of thing.

[@urkent4463]

yeah ann'not all in black so i am gonna not puke at all

[@ryanmattison2044]

Phil's B roll skills are top notch

[@Zohaib1Hassan]

@@urkent4463 y

[@harmonbrentdm]

Yeah I enjoy them too. I just wish Jay and company would list the parts they use in the description.

[@agenericaccount3935]

You can tell Phil really likes his baby cause the montage is 110 percent.

[@matasa7463]

It's pure inspiration material. He just needs some custom sleeved shiny silver cables.

[@pupsaderpupin5627]

so much this !!

[@JustMichaelMoreno]

I was thinking this too

[@mikeltheman100]

I like how Jay takes care of his staff, what a nice boss.

[@pewpewfett]

So I have a case similar to that one. The fan you put on the bottom just flip it to push air out instead of in and you will get better Temps. That's what I did and it works. Having both bottom and top as exhaust just helps overall to remove the hot air out and the air is being taken in from the side panels.

[@2_wheels_fun]

Just done the same as well. Works better with bottom fans exhausting down

[@Jimtheneals]

Normally I don't like anything smaller that a full ATX, but this really looks good. This would make me consider an ITX for my next build.

[@dobermanownerforlife3902]

If you do not need all the bells and whistles ITX is a great platform.

[@AFpaleoCon]

Go watch bitwits video of the new HYTE SFF case, even better than this.

[@TheSmileyTek]

I've been planning a ITX build myself. My current PC build is Intel 10th gen/3080, but I'm thinking Ryzen 4th gen in an ITX build. Still not sold on Radeon GPUs yet though. But AMD is definitely closing in on Nvidia.

[@dobermanownerforlife3902]

@@TheSmileyTek I have always bought mid range cards, so brand not a huge deal. I don't need eye candy. My gtx 1060 will last me a few more years. Forever if I mever really touch AAA games.

[@TheSmileyTek]

@@dobermanownerforlife3902 That's cool man. I just can't control myself sometimes lol. I went from 2070 Super to 3070, to 3080 within a year. My kid has the 3070 now. He gets super nice hand me downs, that's for sure.

[@FARBerserker]

So Jay loves Phil more than his Child then. I can accept that ^^

[@Shadowfeaux]

That was what I thought after remembering he was originally going to use the case for his younger kids build. Haha

[@sirmonkey1985]

@@Shadowfeaux guess she'll get phil's old case which probably makes more sense than that one.. or cooler master sent them two cases.

[@Buckheimer]

Meanwhile his child already has 3 different PCs built for her

[@Shadowfeaux]

@@Buckheimer you mean the older child? lol

[@AthanImmortal]

Phil helps him make money, the kid is just a drain. I can see why he likes Phil more :D /s

[@w0n70n]

Max master maximum platinum gaming prime mlg maxmasterbox lol I love your videos thank you for keeping on even when complainers complain

[@Graphics_Card]

Please save me from being mined

[@c_rusoe]

@@Graphics_Card aight bro how much you cost

[@cl4ssic]

every cooler master product name ever...

[@Graphics_Card]

10:45 “Alright. The gpu completely stabilized at *nice* degrees.”

[@cl4ssic]

nice.

[@deminybs]

Know what else is nice??? the fact I didn't panic sell my 2080 ti like a shmuck 🤣😂

[@Graphics_Card]

@@deminybs and the fact that the people who sold it, they don’t have gpus

[@FlippyDipDipper]

This show just brings me so much peace. Thank you for always being awesome.

[@CMDR_CLASSIFIED]

"The GPU has stabilized at Nice degrees!" I see what you did there!

[@ellie_cr]

Laughed when he said that 🤣

[@DIYTech21]

13:00 got a BSOD there trying to understand

[@thaaqib89]

I completely empathize w/ Phil regarding the Shift. I've got a first-gen, glass-paneled Shift case that I've modded like crazy. I tried to get fabric panels for it but they're all sold out. I know I need to get a more thermal-friendly case but I just can't do it yet. It looks too good!

[@GypsyMoth511]

I'm looking for an NR200 glass panel mod that has ventilation holes cut in!

[@MrStoffzor]

The shift and shift X are weird ones. Shift X at least has space for 240+120mm rad, which is enough to cool a 5700 xt and 5600x, 120mm in Shift is literally only enough for low powered air cooled builds

[@christopherjunkins]

That music during the montage was awesome!

[@WeRemainFaceless]

Smoke test it. You'll see that the bottom fan is actually re-circulating hot air in the case. It pushes air up the column directly above it, that then circulates back out of the vents immediately behind the fan and is then pushed back into the case again by the fan. If you put two fans there instead of one, both on intake, this would make a huge difference ;)

[@alexisrivera200xable]

Great idea, I would add a high speed camera to record that test so he can see the smoke flow better before it diffuses and obscures the view. (that and the cool content potential)

[@Crazyates11]

Also, set the bottoms fan as exhaust! I see everyone assuming that if top fans are exhaust the bottom fans must be intake. That’s only true if you’re using the TG panel. If you want true ultimate performance, use vented side panel and bottom fans as exhaust. It pulls the heat from the gpu out the bottom, and cpu aio isn’t being fed hot air. It’s a win-win for both temps.

[@RubenKemp]

Might as well try exhaust as well. I suspect it will have better results.

[@MisplacedMoose]

@@Crazyates11 Everything you said. Negative pressure everything is the answer. Pull the air from the side of the case and push it out the top and bottom. This is almost the same layout as a Sliger SM580.

[@TranceHistorian]

@@Crazyates11 thanks, this will help me if I finally decided to build in an nr200p

[@markmcknighty]

Cleaning the parts was legit extremely satisfying. Would love a vid on the techniques and tools you used for such a great finish!

[@shawnhowa6063]

Phil has been absolutely killing it with the montages lately. They’ve always been solid, but these last few have just completely stolen the spotlight

[@contentnation]

Just as an idea: Instead of guessing the flow, just get a cheap smoke machine and see it. Also handy when trying to find a vacuum leak in a car ;)

[@shaun3133]

always showing Phil some love, I like it. Phil is just an awesome editor and an awesome guy.

[@MrSimoc1969]

2 280mm fans on top Wow Cooler Master SFF now has become the tardis of cases being able to hold fans larger than the case.

[@AXWagon]

I like how Phil goes from not wearing a mask to having one on when the camera pans back lol I think even he realized how nasty that PC was!

[@simeoncastaldo7081]

I wish they just got rid of masks alltogether

[@JDillander91]

@@simeoncastaldo7081 same with you.

[@ggzyt_livitup3898]

@@JDillander91 💀

[@Aleph-Noll]

@@JDillander91 damn bro you murdered him harder than covid eventually will

[@hyunmineun9322]

@@JDillander91 Dude's got no chill lmaooo thanks for saying it for us

[@slaveNo-4028]

gotta love the fancy schmancy montage editing, always featuring jay's stressed out facial expressions in the back

[@KollinNaples]

If I was interested in an ITX build, I’d definitely would be getting this case

[@ForsakenCries793]

If you're interested in an ITX case, I would recommend to check out the SSUPD Meshlicious. A cool max airflow case which can fit tripple slot cards up to 320mm and an AiO with 280 rads.

[@ffwast]

It's a great value for the prices you can get it for.

[@ffwast]

(If you have an matx motherboard and an ATX power supply the Sama Im01 is a comparable alternative)

[@Dee0426]

@@ForsakenCries793 nah, thats a hype case

[@ForsakenCries793]

@@Dee0426 but it's srsly just good... and available. Nothing you can say about a lot of ITX cases.

[@animegeek6118]

Fans on the bottom of this case work best pulling air out with the GPU pulling in air from the side. At least that’s how mine work best with a 5950x and a 6800 xt. I never see over 65c on the cpu and GPU never gets above 68c.

[@EternalTotem]

Y'all trolling me. I had that Evol shifts then went to the nr200. And now they made this case to troll me. Love the video

[@Mr.Kim.T]

A nice little example of how adding a fan can actually be detrimental to cooling efficiency. This is because cooling efficiency is not just about airflow volume, it’s about how you use that airflow effectively.

[@victorliu9715]

Damn, this might be a good chassis / barebones kit. Giving me the idea to build a SSF PC for my girlfriend. Desk real estate is limited for her, so this might be just perfect! And the Lian-Li fans + LED strip adds an extra bit of lighting flare, enough so it's not overkill👌.

[@djchotus1]

I love that my 5900x is double the C23 score at ~23000 without OC, and only 57deg c literally indefinitely, with 280mm AIO in the Meshalisious.

[@zenosfire]

Hey Jay/Phil. In the off chance you haven't seen, on the Cooler Master site the spec sheet says that low profile fans (15mm thick) fit under the GPU riser, which with the two fans under the GPU, it may perform better? Dunno, just a thought is all! I kind of want this case after seeing this vid. Thanks for the amazing content as always!

[@slinkywizard]

Nick over at Gear Seekers just released a great follow up video of his review of this case, and among other things he re-tested it with 2 x slim 120mm Noctua's below the GPU. His results showed nice temp improvements with the bottom fans (5 degrees C drop on the GPU with the TG panel) BUT he was using a blower style 3080, so that may be the difference compared to Jays findings.

[@sirmonkey1985]

@@slinkywizard yeah i think in this specific instance the weird temps are due to the way the coolers configured on the founders edition.. if it was more of a standard cooler the extra air going through the bottom of the cooler would probably help.

[@DSPZulu]

Here i am three years later running in the Shift with no problems with a 3080 FE and 8700K @ 5ghz. Havent had a failure in my AIO either. Just tap the thing occasionally. And the tubes need to be at the top, not the bottom.

[@amann910]

I like how Phil went a little extra on his montage this time with his build, the montages always kick ass tho. nice work!

[@yourhandlehere1]

Hottest temp in my 3080-3700X rig now hits about 66c. Just added a ML240L V2 with push pull. I made a nice chimney effect with 8 Sickleflows in a Neo Air case. Kind of small, mesh front, top exhaust. Four front intakes on the 240, 1 lower rear intake where the io covers go. Pulls in under the triple fan 3080, all up and out through 3 exhaust. Even at full blast, can't hear a thing...over the window AC unit right next to it.

[@IckyWilbur]

Man, something about seeing a founders edition 3080 with its flowthrough design being mounted vertically makes me a weird combination of mad and sad. Smad. Such an inefficient direction for the airflow design. A regular mount with two bottom mounted fans would have made so much sense in that case with (i suspect) improved acoustics.

[@Craig-ib7gk]

Agreed. The NR200P non-max would be the way to go there, but it has its share of problems too. The only ootb options for an AIO rad+fans are side-plate mounting and floor mounting (the worst possible place for an AIO radiator, yet you routinely see builders on YT chest-pumping about their "pretty" rigs post-build in that exact configuration). It is non-trivial to shoehorn a rad+fans, even low profile, into the roof. That, coupled with no panel USB-C support in any of the NR200 cases, is why I don't have one in my hands already. And I really, *really* like the layout of this case line.

[@ArdentMoogle]

@@Craig-ib7gk I agree so much. I just want an NR200 that I can top mount a rad to, that still has a horizontal GPU for efficient thermals.

[@SpacewolfDan]

@SmashStomp Inc i guess cooler master wasnt feeling the love for better design. no usb c is a joke

[@TobiasRieperGER]

8:00 This is a really awesome looking PC. This Founders Card combined with that Lianli Fans in this case. Oh boy. I WANT THAT!

[@MrPC1121]

I actually like the cage look more than the glass.

[@me0262]

If nothing else, this music is loving my HarmanKardon 2.0 PC speakers. So bumpin', and the bass response is amazing! Even though I don't like the new montages, I can get behind for this one for the music alone!

[@andreja3009]

There is only one thing I would change because of this CPU temps, a would clock CPU to 5Ghz instead 5.1/5.2 and then I would probably be able to lower voltage and temps would be better. I think that 100-200mghz would not impact FPS to much and long-term it would maybe be better for system to have lower temps.

[@farrellbeast]

Those new cpu temps are WELL within a good range. Those temps aren't going to lower the longevity of the system so it would be needlessly reducing performance for nothing.

[@TravisFabel]

Jay, flip that bottom fan over so it's exhausting underneath the graphics card. Remember the AIO fans are working off the pressure differential they're creating. Blowing in additional air, means there's a higher pressure inside the case. Because there's not enough exhaust to fully offset that. So now those fans trying to move air across the AIO have less of a pressure differential between the outside of the case and the inside, and they are moving less air in.

[@PunisherOfDeath101]

The bottom fan will help. Bring it down to a low RPM where is just barely filling air in the case and not blasting air past the GPU like it's doing in your config. Also the GPU design is also a problem, get an aftermarket from MSI or EVGA.

[@amafi_poe]

I have a 5950x and a gigabyte turbo 3080 blower card in my nr200 with a 280mm rad on the side panel and 120mm intake fans on the bottom and exhausts on the top and it's really nice and cool in there. Love the nr200, best purchase I've made in decades

[@DevineDigital]

Jay! can we have Phil share is SensorPanel Dash layout? I absolutely love how he has his configured.

[@titan557]

Check out Jay's video on Nov 2, 2020 - "EVERY PC should have one of these! How to make a sensor panel!" - he shows how to set this up.

[@leitomitch9778]

@@titan557 I think he was after that sensorpanel template instead of doing it all by himself

[@AliciaBrownSugar]

@@leitomitch9778 ye, same. The layout template is what I'm sure we're all after! I'm after that too! I don't even have my extra screen shipped yet! Just ordered it yesterday and started looking at free ways to monitor the stuff. Mostly need GPU monitoring RN if I can't find one I don't have to pay monthly for, or can just buy once and done, or is free.

[@samkremers8737]

Ive got the shift. Put a fabric panel on the gpu side. Used a stock amd cooler on the top (now bottom) to push more air in. And flipped the case up side down with some mods. Temps are fine and looks are superb.

[@paulk3198]

you should add two slim 120mm fans on the bottom as intake, should help a bit with temps - noctua a12x15 chromax work nicely. EDIT: Saw the end and that was a bit surprising, would try lowering the RPM's and see if that makes a difference, slim fans wouldn't push as much air as that 140 25mm fan anyway

[@Lighteningskye]

Annnnnd ... seeing this seconds after I replied with the same thoughts. lol I totally agree with all of this. And maybe orienting the GPU down would be the most optimal for thermals. But not "sexy". *shrug*

[@paulk3198]

@@Lighteningskye it's probably because it's an FE card that pushes air through, a regular gpu that exhausts in all directions would see more benefit of the air being pushed up. Still think it should help though

[@revnto7k]

I think I need one of these cases... I love the look and functionality of it. My next build will go into one of these.

[@AlexNZL]

Would love to see a custom loop in this case

[@BeB02090]

Nice build. Love the way together. Functional and pleasing to the eye. Great job guys

[@jonasluks1438]

I wonder what 2x NF-A12x15 running at low rpm on the bottom would do to the system. I don't know what rpm the lian-li fan was running at but if it was pushing past the GPU then I guess it was fairly high rpm / pressure. Oh well, yet another build idea that I need to put to test.

[@StilgarAstartes]

That would indeed be interesting to know. Although I do also suspect the orientation of the GPU with that particular Blower-Style cooler would create perpendicular Airflow regardless of the additional Fans Speed, which in turn would hinder the overall Cooling inside of the Case. That would explain why the extra Fan caused the Temperatures to increase instead of decreasing - at least in my addled Brain that makes sense. Not sure if lower Fan Speeds would mitigate that problem in any significant way and preserve any benefit to the Airflow.

[@Michael_mki233]

This. Along with something to give it another inch of breathing room to pull air in at the bottom. I think part of the reason the 140 bottom intake didn't work very well is just that the case feet aren't tall enough.

[@ryanhauser3014]

If there was a mesh for the front side with a fan mounted. Maybe a a 140 fan for intake.

[@StilgarAstartes]

@@ryanhauser3014 True. A side- mounted Fan *could* help with the Airflow and not impede too much, but there might not be enough clearance between the side-panel and that teeny-tiny monster of a GPU mounted vertically.

[@Murasadramon]

I want that lil' case so bad. My current case is just massive and weighs a ton (Thermaltake View 72). I love the case, but it just takes up soooo much room. This lil' case is perfect for me.

[@Herbertti3]

I would highly recommend changing the AIO to to arctic liquid freezer II. At least 5C off guaranteed. They also come with RGB now days.

[@shlooky]

to fix the radiator being at the bottom, flip the case upside down :)

[@MistakenMedia087]

I was looking for this case the other day, any chance you could start including what the product is in the description? Especially one with this kind of naming scheme lol?

[@andresrojasradrigan1651]

Same

[@ProjectSmithTech]

The detriment of the bottom fan I generally found very interested. I really like this case.

[@JoseCortinas]

I'm so confused, you should definitely be able to fit 2 full size fans under the vertical GPU. It feels like choosing a sub-optimal configuration.

[@Dee0426]

or just horizontal mount it

[@EvernooBE]

@@Dee0426 can't horizontal mount the GPU in the MAX, without heavy modding that is. To me it's the biggest downside of this version. Should they ever release a version with a modular backplate like the o11 mini, it would be the definitive ITX case.

[@wohoo245]

@@EvernooBE I’m a planning on building with this case with the GPU horizontally, can you explain why it would be hard? I am planning on getting the Kraken Z63 as my cpu cooler and mounting it on top.

[@EvernooBE]

@@wohoo245 The MAX's backpanel only has a (swiveling) slot that allows for vertical mounting of the GPU. The regular NR200P comes standard with a horizontal setup but you can easily add a vertical mounting bracket. In other words if you buy the MAX you are pretty much forced to use an AIO (which is still a very good one), with the regular NR200P you can do whatever you like, but you will not be able to fit your AIO on top without a top hat modification to the case. Check out "Machines and More" channel for in depth explanation of the NR200 in all it's variations. The guy wrote the handbook on the case.

[@estebaneordogh4564]

The video editing of the build is INSANE! great work!!!! I bought this case based on this video and I love it. Thank you 🙂

[@estebaneordogh4564]

The transition at 7:13 is top notch!

[@bygoneegowaitingremoval]

When my gaming laptop idles at those temperatures shown at the beginning.

[@sirmonkey1985]

it's a laptop, that's what they're designed to do.

[@bygoneegowaitingremoval]

@@sirmonkey1985 bad design. Because when they throttle is impossible to. Play. 60 fps one second and 24 the other is not a good experience

[@dwarfer1]

12:50 the reason is because the case was negative pressure without the fan all you’ve done by installing a fan on just the right side is prevented cool air from rising from the left side of the bottom of the case stopped cooling air from rising into the left side of the gpu. installing the fan on the left or both would have prevented it.

[@aaawman2280]

Imagine if everyone had a brick of gold, but luckily I was able to purchase a rx 6600 xt at only 150 dollars over msrp, I didnt know being this lucky felt this bad ;)

[@Heartless8604]

Thanks for the video, I'm way super late but been looking up cases and ideas for a build for my gf and I'm leaning to a small itx build. What first drawn me to the NR200P was the Sakura Edition (I know I'd pay way more than I should) is something that she would love a lot and would give me great brownie points. But this gives me ideas about custom wraps for it.

[@deminybs]

I wake up everyday and think to myself "I'm so glad I didn't panic sell my 2080 ti like a shmuck" 🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@Gassit]

Same.

[@MrCheesusrice]

DUDE, Jay, the montage is so great. Hats off to whoever's idea that was. I watched it twice cause it's soooo soooooothing. Well done.

[@GrandpaStories826]

Jayz always finds a way to make everyone's day happier, he inspired me to create my own KZbin channel❤️💖

[@eveypea]

That was easily the most sexy build montage that I have ever scene. The audio track absolutely sold it for me

[@argeemar]

Hi, I'd like to ask. What is the software of the sensor panel? Thank you

[@danielzebrowski5038]

AIDA64

[@Cypeq]

Yes what this fan effectively does is push air where the exhaust fan blows effectively reducing amount of air available to the right hand side gpu fan. Without the extra bottom fan all the air below gpu is available for it.

[@blormpus1098]

first

[@aftermax01]

I hope the nr200p max will cost around 200/300 euros for the 750/850 watt. Then, you can get a full build with 250 nr200p max 200 itx board 200 cpu 100 ram 100 nvme = 850. Gpu.... X price

[@thedealer799]

My itx build is currently in an evolv shift from phantek. It originally had the tg panels. It used to get really hot. Swapped them for the air side panels and temps are great now. Also running m22 aio with pump in the rad.

[@dannythibodeaux5860]

Thanks for the Aida64 video a while back. I put in a sensor panel a few weeks ago and it has changed everything about how i monitor my pc.

[@the-patient-987]

If you care about performance, you put 2 slim 140s as intake at the bottom that will feed the GPU horizontally mounted, 2 regular or slim 140s as intake at the side with the mesh panel that will your preferred SFF vertical CPU cooler, and 2 slim 140s as exhaust at the top. As for the looks you can go RGB on the fans and some paint job.

[@llamapi3]

I love this case. Coolermaster has nailed it recently with their cases.

[@KyngShadow]

that music that kicks in when they clean out the pc and components is so good

[@Shaman1879]

Love Cooler Master cases. Currently rocking one for my build.

[@diegoaltafini9573]

Putting two grey Kaze Flex fans under the GPU would look nice and improve airflow a little bit.

[@liquidjd6400]

I have the inverted case mod on the nr200, allowed me to Run 2 intake, 2 exhaust. And lift the graphics card up higher. Way better temps with the extra space and fans, I do have a 3070 evga ultra, the fans on the card are slightly more beneficial with the case design.

[@Mark3rz101]

fun mod for cases like these, 3d print longer feet to slap fans on the bottom. Always do exhaust on the bottom and top to help with temps.

[@smoffitt4289]

I saw a review on cooling on this. 2 120mm 15mm thick fans in bottom exhausting and top fans reveresed to sucking got better temps with glass side panel. Best with metal side panel was top and bottom exhausting for negative pressure.

[@TheSmileyTek]

What a great friend, hooking Phil up with a new case. Although the old case looked sweet, displaying the 3080 up front, and dropping temps is worth the swap.

[@olandersnake]

Thank you Jay and Phil. I just bought this case.

[@olandersnake]

@@swizzler8053 I bought the regular NR200. Already have an sfx power supply and 280mm aio. I was going to do an ITX build a few years ago but due to case and mobo options that were available it was a little out of my budget.

[@olandersnake]

I live in Canada. It will be longer before it becomes available. If it even comes up here.

[@evoke2976]

7:14 that's awesome camera work.

[@BansheeBunny]

32 GB per stick at 3200MHz CL14 is sick. You are crowding the bottom of the case with a 25mm thick fan, try it with a 15mm fan and a lower speed profile.

[@pheonixdragon2261]

Really liked the new case with the glass side panel over the perforated metal one.

[@mikeallensonntag]

I've done this build, 9900k and 2080ti back then...that case is very hot for sure.

[@Kitsune286]

I really appreciate the extra tests with the two side panels and a fan on the bottom. Would not have expected that temperature increase!

[@ezel5705]

Absolutely love your review on this particular case. 100% ordering it for the wife. Thanks Jay!

[@LiannLee1666]

Move the bottom fan to the other side now its blows against the exit of the gr card en the back of the powersupply. Or put a second one to it.

[@OntarioGuy430]

That is a nice looking grey on that MAX case.

[@commandershepard6189]

Idea 💡. Cut the return hose on the AIO and place a closed tube (upside-down T) so that it is the highest point. This will keep the air from entering the AIO pump/block.

[@simmonsjoe]

As I said on the previous video, I have the non-max version of this case and I love it.

[@Mani-aX]

if you ever lose Phil, just know your channel would take a major hit. his video skills are top notch and details are insane. Keep up the great work!!

[@robertkamer1820]

My current atx build is giving me lots of grief, with my costly psu shorting spectacularly and most definitely frying parts of may even more costly motherboard. So now my pc gets into Windows once in 20-30 tries. An excellent opportunity to buy a new case and a new board and just moving the rest over to this damn fine looking and performing case.

[@MorrisKytos]

I rarely comment on KZbin vids, but this one deserves a thumbs up for Phil's fantastic montages! Love the great synergy of the music, scene cuts, transitions, everything. This deserves a Chef's Kiss!

[@Blacksadify]

Great video!! I'd suggest putting two slim 120mm fans on the bottom. Would help with temps quite a bit.

[@Babaroga777]

Oh man, i LOVE this mean "reactory" look with the grill-sidepanel !!! Nice 😍

[@MonsterSound.Bradley]

Congrats Phil. This case is way cooler. 😎👍🍁🦋🌿

[@Christian_Ferguson]

That Montage looks great! I really like how the blue reflected off the chrome on the gpu, looks really really good

[@Gmoneybaby]

RTX 3080= Brick of Gold.....great video.

[@kye2379]

I love this case its so sleek. Im new to the pc building game and i want my first ever pc in this case cause it looks so beginner friendly

[@whydoihavetodothisannoying]

Max Master Max to the Max. Nice to see manufacturers take notes out of Duty Calls's book.

[@BigT90]

Loved the detailed parts cleaning, don't see many others showing that

[@WyvernDotRed]

That side grill looks awesome! When I build a new PC, I will probably use this case, as I like the form factor and cooling potential a lot. But for now, my pandemic-budget PC completely suffices for me, even with the budget parts I used, so that's going to take a while and other interesting cases might be release then.