This super tool can be done at home by yourself!

Hi, im a Pensioner . Apart from my work i like DIY stuff, lifehacks, how to make, experiments, well everything that can be made by hand in a home enviorment. This channel " Rough Hands and Unusual Ideas " about new and old ideas that you might have known . This channel is a HACK COLLECTION. It’s an entartainment oriented channel, so do not try to repeat at home everything you see, as it might be dangerous. So take care of your health.

[@davidhoffman7639]

It is good to see working hands making things not from " new" materials , but from scraps of whatever and especially enjoyed putting in the " dimple " at 1:57 with a rivet head excellent work. And for the people who think it isn't much ... Go out and build something!

[@gregconly4680]

finally !! a tool we can make WITHOUT A WELDER !! Thank you so much ! DO MORE NO WELDER TOOLS PLEASE !

[@Strawman333]

Great idea! Good for setting doors by yourself. As well as, many other uses. Thanks!

[@lostintime8651]

i use magazines

[@lotusyang6671]

Hi, Straw. We have some kind of showerhead made of top 304 stainless steel which need 5 marketing tester. All product is free. Would you like to join our group? If you'd like, my email is: my email is: [e-mail]

[@nikiamz6501]

Very cool and creative tool! :-)

[@andrewlorigan1822]

Another great build! They need a working hands emoji 🤝

[@bassx6071]

Great idea using the old bike chain links as brackets, their hardened steel is definitely up to the task--I will borrow this great idea! This tool would be useful all over the garage and house, and you made it!

[@bombaydan]

Brilliant idea

[@ExyleCage]

Awesome! Now all I need is everything I don't have!

[@lotusyang6671]

Hi, ExyleCage. We have some kind of showerhead made of top 304 stainless steel which need 5 marketing tester. All products are free. Would you like to join our group? If you'd like, plz feel free to contact me. my email is: [e-mail]

[@davesstuff1599]

Nice idea but won't last long since the tensioner gets rounded quick with heavier loads. Maybe do double it up like a high lift jack?

[@TheFuoco72]

BUONA IDEA !!! COMPLIMENTI !

[@mullm5375]

Neat idea, though I always just use a flat bar.

[@bengalalonga7510]

parabens o sr e um mestre das invencoes.muito obrigado.

[@lewisdrake5765]

Nice little tool. I never have a shim around when I need to do stuff like this and sometimes there isn't enough room at the bottom for me to get my boot under it to lift it. I will probably use my powerarc and weld a tool something like this

GOOD VIDEO GREETINGS FROM PERU AREQUIPA LUCK FRIEND

[@duggy788]

very good, i wonder if you could put the spring and pawl in the opposite way would it work as a clamp?

[@ronyerke9250]

There's an automotive mechanic's tool just like that. It's placed between the front edge of the driver's seat and the brake pedal. It's handy for checking brake lights, checking automatic transmission fluid levels, and bleeding brakes. The only difference is, the automotive tool has a longer rod (reaches farther).

[@joseribeiro2220]

R4

[@SmR8008]

With equal sized plates, this could be used as a brake caliper piston retracting tool.😊

[@nonameforu]

What different things could this be used for?

[@tofanedward9049]

Satana Diable setting doors and also as a clamp for welding or just to apply presure

[@Mike-xt2ot]

Great for depressing brake caliper piston as well!

[@olivierroy1301]

Je pense à utiliser cet outil pour repousser le piston de mes étriers de freins lors de mon prochain changement de plaquettes. I think about using it to set back the piston on my brake calipers next time I change the brake pads.

[@juanmillahualaviles2488]

Q paso con la proteccion de esa amoladora!!!#!!#!!!

[@davidvickers2272]

Might be a good tool but with the screen blocked by video ads, we will never know.

[@Jesus4UWH]

Can’t even see what you did with the tool because of the ads that popped up at the end.

[@DedicatedSpartan]

Billy Piano download the video

[@user-ts5cu8lp5o]

Не, ну если каждый день по 50 дверей снимать, то...... 😀

[@CredibleHulk10]

Your desire to attract me to additional videos which led you to obliterate my view of the final product in use has dissuaded me from the pursuit of watching any additional videos.

[@johngalbicsek5567]

Yeah, but the channel name makes up for it though lol. Also hes a craftsman, not an editor clearly :D Honestly I have no use for a door setter and mostly enjoyed this for awakening the ideas of all the things in which I could repurpose a caulk gun to do.

[@CredibleHulk10]

@@johngalbicsek5567 Fair point.

[@TN-bm6dh]

Pry bar and some pieces of wood will do. I don't have those tools!

[@amanofmanyparts9120]

Why not just buy a set of cheap wedges to do that? After you've finished with them you can then use them to hold the same door open.

[@bastairenlag301]

Hello Sir Woukd like to know from which country you are from?

[@MARDIUNO7]

KEEP YOUR FINGERS AND THUMBS , WEAR SECURITY GLOVES , UNLESS YOU HAVE REPLACEMENTS....

[@HuNkPaPaPeople]

I bring in a helper who doesn't know how to set a door. Teach them how, and WE get the job done AS A TEAM. What ever happened to getting a kid to learn how to do some productive tasks around the kennel.

[@chuckg2709]

Nice idea but with my air bags I can fine tune my ajustments up , down and side to side

[@JoeKing67.]

Chuck G air bags? What are you installing the gates of heaven!

[@chuckg2709]

JOE KING No dude there made for construction now , they work great for working alone , check them out at any home Depot or Lowe's the smallest one I have is a 4x4 inch and the biggest is a 12 x12 inch they are great

[@JoeKing67.]

Chuck G Ok I didn't think they come that small, I used to do finish carpentry, and I had to install a lot of doors ,I used my flat bar,but yes I checked them out,pretty neat.

[@chuckg2709]

JOE KING Yes yes they are , they work with a hand pump like a BP cuff has , and a finger valve so you can really ajust them to perfect , I used to do the bar thing also until I got turned on to these , now I don't leave home without them and there non slip also , really very well worth the money ,.

[@siroman9]

цікава ідея

[@MegaBait1616]

what about tapping 2 wooden wedges instead ?

[@lotusyang6671]

Hi, MegaBait56. We have some kind of showerhead made of top 304 stainless steel which need 5 US marketing tester. All products are free. Would you like to join our group? If you'd like, plz feel free to contact me. my email is: [e-mail]

[@shavajkhan9561]

Sir bangals ki jankari do firozabaad ki bangals kaise bante h plz

[@ghavila1766]

I thought he was going to use it to push the piston back in on a disc brake caliper.

[@unclaimedstorage]

*First these projects are amazing!* _Please please please_ add the tools function to the description. So it can be searchable. You can leave the terrible old hat click-bait titles if you think that will get more views than targeting tool heads and "off the grid" demographics directly..

[@lotusyang6671]

Hi, John. We have some kind of showerhead made of top 304 stainless steel which need 5 US marketing tester. All products are free. Would you like to join our group? If you'd like, plz feel free to contact me. my email is: [e-mail]

[@jaimesustaita285]

I thought you were making it for brakes,push in cylinders

[@richardcraniumdicksinn3959]

Cat got your tongue?

[@peterpoynter3442]

What did he make with his gard off his grinder

[@rhchheda]

Name the tool? Rather mask it as super tool, seems kind of scaffold Jack?

[@davidyisrael007]

Can’t really tell what he did with it because a bunch of videos popped up on the screen and block the view. If it has anything to do with setting doors and then I have to say it’s pretty lame. They sell wedges at Home Depot for a few bucks that do the job really well

[@flaviojesusgalindo6789]

y al final para q sirve .X que con los anuncios no se ve para que sirve.

[@Daedalus_UK]

Other videos went over the top so could not view end use.

[@andrejochimsen498]

ziggy2070 i think you use it to adjust doors when hanging a door(putting latches)

[@MrBetovolador]

Si , apesta, tanta payasada y no se ve al final para que es o como se usa

[@aliarikan2985]

ziggy2070 p

[@AdityaSingh-tk4kf]

I have also

[@CzowiekDemolka]

use more light

[@Papamac67]

Um... I think I'll save a lot of time and trouble and just use a wooden wedge.

[@user-tu4lh6qr9i]

What is it?

[@danielmarianodulic6828]

La proteccion de la amoladora te la debo. Si me corto los huevos, de paso el video enseña control de la natalidad...

[@desolatesurfer8651]

So what the hell does your super tool do? You should change your name to Super Tool.

[@Biggreydog]

Tim M your a tool

[@user-vk8rw4hq4q]

เพลง

[@mightymonty4549]

Missed end result frigging ads

[@user-dx3fx7ys5r]

I did not understand how to use it 😙

[@willharpe59]

😂😂😂😂MDR 

[@lucasdJAdam]

One shitty tool created from another. There are these little bag on sale. You can pump them up and they lift 150 Kg.

[@tubutieghi]

REALLY!!?

[@juliangarcia1382]

Fac

[@user-sm2td3xs9f]

good but not strong

[@Igniter4life]

Pfff so much work for what? We work in Windows and Doors and the simple crowbar does it all .. only put your foot on it and lift .. easy as fuck and no work at all

[@garybentleysr7929]

Video incomplete

[@user-vr9he2gn8h]

И на хер мне это сдалось?

[@Ana_Sultan]

Useless idea as not everybody got the machines you use. so it cant be done at home. a small air pumping bag is much better to use.

[@nikolay258]

Que fastidio ver trabajar sin guantes

[@jammbarjamm3225]

Shit

[@jamesashlock5235]

This was a total waste of my time, shame on you for making everyone think you had something really cool and then right at the end you see nothing but commercials!

[@MaJa-zm5zg]

co to za gówno?????

[@MissionaryForMexico]

That is about the most stupid design, waste of time tool I have ever seen on this KZbin channel!