This Tool From PICHLER Is Going To Save The Day

[@tonypaddler]

Hi Jimmy, I bet that you were like a child in a sweetshop when you saw that new tool 😁👍

[@ORileysAutos]

You got that right!

[@tonypaddler]

@@ORileysAutos 🤣👍

[@hughmarcus1]

Just the job when you’re lying on your back on the wet concrete Jimmy 👍

[@tomcurran65]

Them Pichler tool designers are next level. What a perfect tool.

[@ChrisKHa715]

As a German i have to laugh - Otto or Timo, doesn't matter 😅😅😅 nice Tool, nice Video 👍👍

[@warwickbunn1250]

It one of the nice parts of the industry to see companies or individuals come up with brilliantly 'simple?'🤔 solutions to tricky problems. I'd order one of those. Maybe you could sell them or have a discount code for a commission sale as thats a very clever solution. Thanks for sharing.

[@PKNEC1]

Great tool. Really like being able to use just the extension bar

[@ORileysAutos]

Absolutely!

[@maxwellanderson2427]

Just watched your Honda crv video, I checked my hose coming from air cleaner it's split, like you found on video must be common I was having dpf problems, just like to say big thank you Jimmy.

[@ORileysAutos]

Did it work?

[@maxwellanderson2427]

@ORileysAutos I ordered one off ebay 16 , the honda main dealer were 85 quid, think it will work as I was getting oil dilution and changing oil an filter every 3k miles an putting premium fuel in , had a forced regen 10 months ago ,but sounds to me oil dilution caused by the air fuel mixture not right because of split in hose, I'll keep changing oil anyway only takes 20 minutes an premium fuel its done a few miles 150k .

[@davidmehlhorn726]

As someone who spent three days trying to get an exhaust gas temperature sensor out of a 13 year old Qashqai (I succeeded in the end!), this tool would have saved me three days of my life!

[@del9936]

Don’t get it a seized component is a seized component don’t care what tool you put on it it’s seized for a reason my opinion , doesn’t matter what tool you put on it it’s seized ,

[@ORileysAutos]

Well without a good grip you end up rounding it off and making it even worse

[@davidmehlhorn726]

@@ORileysAutos that’s exactly what happened Jimmy and if you know where this sensor is on the Qashqai 1.5 diesel, it’s a pain to get to. I had to strip out the offside wheel arch lining and get at it from underneath. I ended up buying a special set of sockets in Screwfix for rounded off nuts and they got it out in the end using a long breaker bar for leverage. Up to that point, nothing had worked, no WD40, not heat etc. Hope you start churning out the videos again as you’ve been a bit “quiet” of late. Hope everything is alright with you👍

[@chrismiller3644]

That's gonna make my life a bit easier. Thanks for the demo

[@ORileysAutos]

No problem 👍

[@macmad6959]

That’s a great tool, they are so difficult to open especially when hot.

[@ORileysAutos]

Yes they are!

[@next0845]

A well engineered Crows Foot

[@shaunblakemore7150]

Looks good, love new tools 👍

[@ORileysAutos]

Me too!

[@stephengeraghty3368]

Better tell “L R Time” to get some as well .❤

[@jaseduar]

Interesting tool 👍

[@ORileysAutos]

I think so too!

[@jrh86]

Excellent ❤

[@ORileysAutos]

Glad you like it!

[@EmmtKidd]

Where has this tool been all my life

[@ORileysAutos]

I know

[@roddysallie8098]

What is the kit called? Is there a link? Thanks

[@ORileysAutos]

Unfortunately it's not available yet. I have to wait until next month to receive mine. It's a new tool so this is just a show demo... I should have a link next month.

[@ORileysAutos]

Part number is 60525400 Name Sensor Service Kit Gen 2.0 👍 Not available yet on website

[@oscar4321234]

Otto, someone is a Die Hard fan

[@ORileysAutos]

At least I didn't call him Hans 😆

[@waynebrinkley6284]

That's a game changer, will it help with the vast amount of vaporisers you pull out? Thanks Jimmy 👍

[@ORileysAutos]

I hope so

[@leehayes70]

What or any additive would you recommend for short journey diesel vehicles.

[@TeezerDriz]

Super engineering design.

[@ORileysAutos]

It sure is!

[@cliffperry8470]

Jimmy, please can you say if I could clean the EGR valve through the sensor on a 2.2 Land Rover evogue or is it better to go in the inlet . This is regarding fluid ok . What would advise?

[@jimconnelly1733]

yep I like that one, should work on brake lines also , cool

[@CLUTCHKID111]

Is this tool on the open market yet? I’ve been looking for some time but unable to find it.

[@JoseSilveira-newhandleforYT]

Looks great and expensive, but if it saves time and avoids busted nuts, it will be worth it.

[@ORileysAutos]

That's the plan!

[@JoseSilveira-newhandleforYT]

@@ORileysAutos 👍

[@RumpleXStiltXSkin]

A new tool A Rooney 🤙🤙

[@thindo]

😂😊😊Waiting to see you try it

[@ORileysAutos]

Challenge accepted

[@jimduk]

stupid question , but (for removal) if it's being replaced then why not cut the wires and then slide a ring spanner on ?

[@eArtrash]

Because we don't want to change the sensor, we just want access to the inside of the dpf to inject cleaning chemicals

[@jimduk]

@@eArtrash Ah ha! thanks!

[@13adrian]

It's only got to get you out of trouble once and it's payed for its self then you'll wonder how you have done without it for all this time

[@ORileysAutos]

True

[@CE11SCAN]

Crowfoot or spanner is the same but a good tool still

[@ORileysAutos]

It's not. I use crows foot on these and the still slip it very tight

[@MotorwiseBromley]

with open ended tools the jaws spread this stops that happening

[@BH-tp3pm]

Jimmy, have you fixed all the Land Rovers in the area? I haven’t seen one for a while 😅 Also - what’s your stance on EVs? Are you looking to expand your skills to those? Selfish ask really - but I’m getting a second car which is a Model Y and need a reliable mechanic just in case 😅

[@paulriggers1558]

i have no bother getting them out, but unfortunately it strips the threads out even when orange hot half the time...

[@ORileysAutos]

Guess what... they also have a tool for that

[@davidoff59]

So all the torque is on the narrowest part, held together by a thumb screw.

[@tonydaddario4706]

The thumbscrew is just holding the head it's not taking any load.

[@careyautorepairs]

Temos ass must have been as big as the O in his name when he seen you coming. That video was going to make or break that product lol. TBH they got a good tool for sure and I like how they took into consideration the different angles to change the bar.

[@cw2126]

👍👍👍👍

[@ticthedog6095]

Does that kit go up to 22mm?

[@jimzigouris]

price?

[@yunk9]

Looks the same as a line spanner?

[@ORileysAutos]

@@yunk9 not at all

[@yunk9]

@@ORileysAutos They must be really hard the get off then.

[@LondonCarnaval]

I wonder how much does it cost 🤔 😕

[@gurpalsahota9726]

Do you have a link?

[@ORileysAutos]

Unfortunately it's not available yet. I have to wait until next month to receive mine. It's a new tool so this is just a show demo... I should have a link next month.

[@damianbarnbrook1305]

Link to the tool ?

[@ORileysAutos]

Unfortunately it's not available yet. I have to wait until next month to receive mine. It's a new tool so this is just a show demo... I should have a link next month.

[@damianbarnbrook1305]

@@ORileysAutos top tip, if the EGT is knackered, just cut the plug and use a socket if it's stuck, works a treat, obviously not a good idea if it's not a buggered egt 🤣

[@rabadabadoo491]

Nice 🤓

[@ORileysAutos]

Very nice

[@grahamshillingford8229]

Isn't that Uwe?😂

[@wildfruits477]

Just use a spanner 🤷🏻

[@ORileysAutos]

🤦🏻‍♂️

[@wildfruits477]

@@ORileysAutos jimmy mate i’ve never had a problem so far, also what about the tight space to fitting it in

[@dominicbarne5218]

If it’s seized solid it doesn’t matter what tool it is your just destroying the threads with a different tool, hopefully this will give that little bit extra 2% that makes the difference…..but i doubt it you’ll still end up taking the whole thing off and throwing it across the workshop 😂

[@ORileysAutos]

They also have a tool for stripped threads

[@doggy55915]

Still gonna snap

[@ORileysAutos]

Let's see

[@Luistv-n8l]

Hello friends, I have a range rover vogue diesel 2008 l322 and the gaptool tells me that the control module has an internal short circuit and that is why the acceleration is limited here in Germany it is quite difficult to find a technician to repair the module, please help with a address and telephone number that can repair my module thank you all in advance happy weekend

[@steenhmm5047]

Otto😂😂😂

[@ORileysAutos]

😬😆

[@nickayivor8432]

WELL-INFORMED ,O'Rileys Autos 👍 Enjoy your weekend with all your family around you,O'Rileys Autos

[@ORileysAutos]

Thanks! You too!

[@cypeman8037]

I see tools everyday.

[@s.wilson5675]

In uniform.

[@Daniel-OConnell]

Unfortunately the Chinese will have a knock off version on the market within 6 months. This kills tool innovation.

[@mrfishbulb7187]

Adolf?