This Viewer's Gaming PC Desperately Needs Saving!!

[@kannabi]

Thank you so much for all your help Lauren!! Thanks also to Noctua, Fractal Design & Cooler Master! :)

[@Phil_AKA_ThundyUK]

Did you do this on purpose :D

[@toaletttbord]

Why????

[@Tepnox]

Shame on your dust man. You could have cleaned up a bit your dirty mess. Lauren is not your cleaning mistress...

[@TastyPC]

@Tepnox - I was adamant that Chris didn't clean it or improve anything before sending it to me, as I wanted to be the one to fix it.

[@kannabi]

@@TastyPC ^ this lol

[@mrmactknife]

This man should never be allowed to "build" another computer. The revamp looks sharp. That tune during the teardown/cleanup was an absolute banger!

[@Astor4o]

Glad you're back. Love these chill and high-production quality videos.

[@RobtRoma]

I love the production quality of your videos. I also really like content like this (upgrading, cleaning, trouble shooting). Looking forward to the next installment!

[@randynovick7972]

Holy cats, Lauren, what a mess to deal with! I think your choices for changes are very elegant and aesthetically pleasing. Looking forward to seeing what the post problems are. Such a pleasure to see new content from you. Best.

[@genojoe3176]

Welcome back, Lauren! I built one of my first gaming PCs in that case, and it served me well!

[@junkerpug]

Videos are rare but every time one does come out its very well done sounds and looks great. Its always a treat when one pops up in my feed.

[@PCFees]

It’s great to see you back! You did an amazing job cleaning up those dirty parts and finding a case that does them justice. Hope to see you on here more often!

[@Simon-pg1bm]

Welcome back Lauren, it's always good to see your notifications.

[@blueblade455]

Looks like the taking in of viewer's PC's for repairs seems to be a nobel and new trend now, which I totally dig. Greg Salazar is in his 2nd season and even for me being a 14 year PC veteran, I'm always learning something new on what can possibly go wrong with custom builds. Lauren, I highly advise that you start your own viewer PC repair series as it teaches a lot of newbies on how to properly repair a PC. Just make sure you have a lot of extra new and old spare parts for testing purposes. Great work with this one Lauren! 👍

[@ivisyung3088]

this is why console gamers disgusts me. they have no knowledge of computers and they dotn even know how to build a pc. they should stick with console and leave these high end spec to us PC entheusists,

[@OssyLucky14]

@@ivisyung3088 Your ignorance is the only disgusting thing, mate. Fun fact, plenty of console gamers become PC enthusiasts and do their research. Just because one guy built a bad looking PC doesn't mean everyone else is the same. You're brain-dead if you think playing console has anything to do with building a bad PC and I say that as a PC enthusiast lmao also TastyPC stated that she was adamant that the PC builder: Chris didn't clean or improve anything before sending it because she wanted to be the one to fix it. The Pc Builder Chris said he built it after a plethora of drugs and alcohol so guess what? THIS IS A TROLL BUILD! And you fell for it like the arrogant PC Peasant that you are 🤭 Your logic is that console games disgust you because they don't know anything about computers but then go on to say they should stick to console? Do you see the contradiction in your statement or are you just as blind as you are arrogant? You PC peasants disgust me, thinking someone shouldn't get involved in PC building just because they prefer a certain gaming platform. If all it takes to disgust you is to find someone who doesn't know how to build a PC and has no interest, then you're gonna be living a very lonely life lmao sit down, take the L and get your arrogant PC Peasant ass out of here.

[@Salfordshire]

She’s back. National Treasure. Glad you’re well Lauren. X

[@darthdigital3789]

🙄 Jesus....

[@streeterarp]

wtf

[@colors6692]

Incel detected! That's you Nine Inches, more like 3 Inches!

[@____________________________.x]

lol, "advanced hi-fidelity dust particle physics"

[@aperum4414]

That was great plus the graph of the original airflow, awesome!

[@____________________________.x]

@@aperum4414 yes, that little question mark, burned...lol

[@krissebesta]

"So this gaming PC features advanced, hi-fidelity dust particle physics." HAHAHAHAHA! Best "compliment" ever on a PC build!

[@kevinsdb1]

OMG has he ever cleaned it?!?! Reminds me of my best friends gaming PC I built for him. He called me 2 years later complaining about the PC overheating all the time and first thing I asked him was "Have you ever cleaned it?" Nope, the CPU heatsink was caked with dust and dog hair. Why are people so lazy?

[@kannabi]

Elden Ring XD

[@andrewmcewan9145]

Back in highschool i used to have lan partyes and as i built/found most of my friends pcs I did a dustcheck and clean before we setup. Its amazing how much dust can build up in a short time the more open air you get.

[@UnN3wBie]

The Verge PC build: ''finally, a worthy opponent, our battle will be legendary!''

[@TastyPC]

Scorched Earth!

[@DeadlyDragon935]

This was way worse tbh lmao.

[@FastRedPonyCar]

What an absolute CHAD of a build he sent you. The NVMe hanging off the board was *chef's kiss*

[@falcon_three_fifty]

Good work on this video, Lauren! I'm looking forward to watching part two. :)

[@RicochetForce]

That build was 100% anxiety inducing just to look at. Hearing that multiple components were completely unsecured while high ticket, modern gear was in there made me say "What the fuck" on more than one occasion. You did a tremendous job fixing his rig.

[@radomane]

Impressed that the motherboard is screwed in, seems like the guy has never held a screwdriver..

[@aeternosolus52]

It's so nice to hear your voice again Lauren, we've missed you 💖

[@Radfordperson]

+1

[@____________________________.x]

Oh my, I'm going to need to pause this video and go get some snacks...

[@Chickenkeeper]

Great video! Especially the blueprint animations, whoever made those sounds cool :p

[@vazkovzeveline4712]

Just a tip: If its an AMD CPU you're trying to remove, always be mindful that it can be stuck on the heatsink. Do some stress test on the CPU or make it reach high temps before powering it off. The added heat will make it easier to remove and eliminate the need for a hair dryer. Then when removing the CPU, unscrew first. Then lightly twist the CPU cooler clockwise/counter-clockwise to loosen the seal between the heatsink and the lid of the CPU. There is no need to press downwards too hard or you will bend the pins. Only sideways motion and not too hard. If you've pulled it out already and it's still stuck, you can use dental floss method.

[@QW3RTYUU]

Thanks!

[@lewiswright4038]

You actually throw the case and then roto it out for the fresh prince skit 😅 nice some serious production value right there

[@benloud8740]

My favourite thing about Lauren's videos is when she has an "oops" moment

[@TastyPC]

It does seem to happen quite often lol

[@nitt3rz]

Wooo!! nice to have you back Lauren! Great job on the re-casing.

[@geo897]

23:51 I assume you remembered that you hooked up the power to the reset button. ;)

[@Nate_123]

Amazing job on the build! Happy to see you posting again.

[@GiordanoBruno42]

This makes me remember when I was 13. I had an old PC with terrible specs including a 128mb graphics card from the late nineties. I desperately wanted to play portal so I spent a week finding ways to make the game less demanding. Eventually I found a tool that let me play it using an earlier version of directx which got me up to 30fps in 360p :D fun times I got a lot of enjoyment out of that shitty PC, emulators were such a revelation when I found out about them, I played most of the N64 library.

[@hectorramirez5227]

Damn have you upgraded your pc now?

[@GiordanoBruno42]

@@hectorramirez5227 lol yeah got Ryzen 3600 and Radeon 5700xt

[@RWL2012]

128MB VRAM is more early 2000s than late 90s

[@GiordanoBruno42]

@@RWL2012 you are right it was an mx440 so it would have been new in 2002

[@SianaGearz]

There's actually an anti-cat accessory that you can get specifically for PC chassis with top mounted power button, it's a sort of clear acrylic flap that is attached with transparent double sided tape around it and covers it up. Or you can tell me how big the button is and how much space there is around it and i can maybe just design one to be 3D printed in the style of the case.

[@NovusDundus]

Oh that poor sweet computer was tortured

[@davocc2405]

That's the most delicate cleaning of components I've ever seen... Not even a wire brush and a karcher!

[@SmokeMastaP]

The easiest method for AMD CPUs (regardless if its warmed up or not) is to unscrew/-hinge the cooler and twist it a bit in the socket in both directions. The cooler should come of very fast, even if you had used some kind of glue as thermal paste. But great video. Very informative and you also have a good speaking speed. My guess for this PC, you forgot to push the power switch at the back of the PSU. :P

[@donaciuxx]

twist

[@kamen.rider.decade]

Welcome back! That is some nice cable management, given what you had to work with.

[@IronicTonic8]

As a pc builder who has been building pc's for more than 20 years, watching this made me sick to my stomach. Why was nothing secured with screws?????? What the hell is going on with the fans. Was this dude trying to kill his hardware? Lucky his PCI-E slot didn't get damaged by the GPU sagging.

[@____________________________.x]

screws are so Boomer... it's all about the vibe now

[@DeadlyDragon935]

Yea honestly this dude would have been better of just getting a prebuilt.

[@____________________________.x]

@@DeadlyDragon935 yep, boutique builders were invented for this guy, essentially he’s just getting Lauren to do the job instead. But it’s bonus content, so all good

[@greyheadcustoms4678]

nahhhh @attichris is a great guy, can program like a madman, but hey pc building isn't for everyone

[@wyatt77777]

Poor Tasty... she pulled a Kyle with that socket change :P Just teasing you, and troubleshooting is the most important part, this is what new users fear the most, glad to see you back to making videos and I hope you are doing well!

[@photoangelov]

Wow, this build looked like someone just threw components inside, some of which stuck in place and it somehow worked, kinda. 😁 Who knew, that all it needed was a woman's touch. Not just any, though.

[@Gabriel-xd2hx]

entertaining, informative, funny, scary, relieving... and there was even a cliffhanger at the end. what a roller coaster. i liked it - and looking forward to the sequel

[@JerziTBoss]

How could anybody look at that and say "Yeah that's good enough"... My current case is from 2014 and while it's in need of upgrade it looks much much better than this. Hopefully next month I'll be able to build a new PC and rebuild my first PC from spare parts. The noise was loose fan blades hitting the front panel... I had same issue with fan when before it died.

[@shanky.y]

almost 10 years u have your case , Awesome !

[@borinken_foliage8003]

This is one of the best videos Ive seen in a while. Amazing content!

[@____________________________.x]

11:22 removing the motherboard seems to have left a USB header still attached to the backplate? I've not seen that happen before. BTW, check that new USB card isn't affecting the boot, I had one that disabled my network interface once

[@TastyPC]

I left my wireless keyboard receiver plugged in lol

[@____________________________.x]

@@TastyPC haha 🤭

[@stevewatson6839]

Cliffhanger ending!🤣 Now the tenterhooks of "When will part 2 show up? Will part 2 show up?". This channel has so much potential; I'd like to see it fulfilled one day.

[@DandBGhostHunters]

Great video as always! I have to ask... when you tried turning it on, had you remembered you wired up the reset switch as the power button?

[@chrisw3559]

Hey, just found your channel and really enjoyed the vid. You turned an abysmal build into a proper build of beauty. Looking forward to your trouble shooting vid.

[@Stalast.]

I feel like you had the video planned out in your head for it to magically Just Work™ when you turned it on and we'd have a simple happy ending complete with a nice performance bump and benchmarks :D If only tech support was that simple. Good luck fixing it!

[@homiefizzle5260]

Good to have you back!

[@WTFShelley]

Is this guy trolling her......or did he get it second hand from The Verge??? XD

[@chinobino1474]

I was happy to see this video pop-up as your channel had been quiet. I appreciate you explaining the reasoning behind the decisions you made in this video as it helped to follow your thought process in solving the many problems the original build had. Coincidentally I also replaced all three of my AIO Water coolers with 3 x Noctua NH-U12a, no regrets!

[@TastyPC]

I'm curious, what was it about AIOs that made you turn to air cooling? :)

[@chinobino1474]

@@TastyPC Tiny leaks and slow evaporation with rising CPU temps after a couple of years.

[@Jon86Gaming]

Great Video Lauren 👍 Very satisfying seeing a neglected PC being looked after! Crazy to see a build end up like it was given how many tutorials are freely available online 😅 Hope it boots 😁

[@kannabi]

blame my laziness lol

[@Jon86Gaming]

@@kannabi hahaha I get it, cable management is a pain but maybe a few more screws next time? Hehe 😅

[@kannabi]

@@Jon86Gaming sounds like a plan! lol

[@drunknmunkey666]

Respect the hardware.. Come on.. This was a SAD PC to look at initially

[@itklimt]

We have a few of these per week 😅 It's amazing to see your passion and dedication to fix this mess.

[@catriona_drummond]

When you said "software engineer" I was already bracing myself. Never met a coder who cares about hardware at all.

[@johnpaulbacon8320]

Well done on the repair. When I first saw the title - i didn't expect the pc to be such a newer build with current gen hardware.

[@JJsiN84]

I know after 6 years, my poor PC needs a makeover too. Still uses DDR 3. Good to see you back. Edit: Felt so satisfying to see the M.2 drive just get a simple screw in lol.

[@AudioStorm1980]

If I were u I'd wait for ddr5 to be around about 6 months longer then upgrade.

[@JJsiN84]

@@AudioStorm1980 Sounds like a plan, with prices as they are im in no rush yet.

[@Alster763]

Your videos are very informative but also very relaxing to watch.

[@gamerlegacy]

Oh god this hurt my soul. The finished product looks great though

[@PhobiaSoft]

A two-parter??? Oh I'm hype. Build looks fantastic so far too!

[@adex309]

Welcome back!! loving your videos.. keep it up!! can't wait for the continuation of this upgrade.

[@uwhat1]

Always enjoy watching a KZbinr who actually knows what they are doing and has the guts to leave mistakes in the video, which help people learn and feel less bad about their own skills. I think I have built in an excess of 250 P.C's

[@jasonsaez3668]

Lauren, so lovely to hear your voice again! I literally just pulled out another Ryzen CPU yesterday, with the same result. It came out with the cooler, although I don't think any pins are damaged. Fingers crossed! When will we get to see your beautiful face again! I miss the old reviews you used to do! Long time fan! Cheers!

[@jaysevenx9994]

I'm glad to see you are back. I hope all is well with you 😊

[@tbuksuperfly]

We've all been there. As an AMD user for the last few years, I've become very used to the 'twist and pop' method in that I always twist/wiggle the cooler in circular motions until I feel the 'pop' where the thermal paste has let go.. and then I know I can lift the cooler safely. Had a 3700x come out like this and end up with a load of bent pins. Thankfully, with a needle and some patience, it's now working fine in another build :)

[@freeman2399]

That montage was perfect! Always a pleasure to see you again. :)

[@Tree-House69]

This was awesome to watch, I'm sure you've already troubleshot it but I hope it wasn't too complicated to diagnose and fix!

[@cijoykjose]

Some projects should be done in two parts , like you were gone for a while and returned back.. its good to see that you are spreading outside the content creation and service .. the talent and wisdom is great .. need more videos like this. Much Love Lauren..

[@jase171973]

love the usb dongle hanging on in the io shield as the motherboard is removed from the case.

[@itzdakoolkid4172]

Great to see you back! Always love your detailed reviews. Great camera work btw. Keep up the awesome work!

[@mikeoleksa]

Great video and revival of this system, Lauren! Glad to see an upload from you and that you seem to be doing well. Ill be looking forward to the troubleshooting video.

[@mikeoleksa]

I actually just had the same CPU issue when I was swapping out my EK CPU waterblock for a new Alphacool one. The CPU came out with the block and I bent a bunch of pins on one corner. Nothing that a single edge razor blade won't fix. Just run it down the rows of pins slowly and as it comes to the bent pins it will start to hang up a bit. Slowly wiggle the razor blade slightly to straighten the pins. I've fixed a few this way and I'm sure it won't be my last. I am looking forward to AM5 mainly for this reason as well.

[@ephjaymusic]

Wahey!!! Great to see you back!!! 👊🏻

[@jjvirago]

Great to see you back and I am digging the music!

[@zshadows]

That rig looks great! Love the Van Dammage soundtrack. It's a shame it didn't POST, but you'll get it.

[@kannabi]

defo follow van dammage

[@DDT2005]

Thanks for the Star Wars Rogue One reference. It reminded me I still need to watch "Solo: A Star Wars Story".

[@____________________________.x]

I really loved the cleaning segment, you could re-edit that with soothing music and upload on your amazing ASMR channel 🤗

[@Hadasengel]

I love how it came up! looks slick, i hope this guy will keep it nice and tidy as you put a lot of effort into it! gj! :) (and i wish i could see the end where it boots up :/ )

[@eatmykwad]

just stopping the vid at 15:21 to say holy fuck this is good video, yeah I kinda am in love with your voice like most but the care and attention your giving this is unreal, I shall continue!

[@cradrap]

This is the only pc channel that i still watch because is the best one. But I wish you could post more videos.

[@AngelXjp]

I've missed your videos. I'm really happy to see you filming again. I think that you really have a unique style to your content. I look forward to hopefully seeing you presenting us with them once again.

[@scottgardiner7418]

A well needed intervention. Nice refresh. Can't wait for the follow up.

[@csorrows]

Owch. I have not yanked an AMD CPU from a socket in many years. Unlatch the cooler entirely first, then give it a slight twist. This will break the surface tension of the paste. This method works 100% for me. Loved the video!

[@ROBBTheMovieCollector]

Nice to see another video from you Lauren. Really enjoyed this video. Looking forward to part 2.

[@LetsRock1t]

My friend is editing for a lady twich streamer.. I told him I watched your 900d video years ago and I did some research and found it. It felt great to watch your video again after 9 years.

[@Dave64track]

Good to see you back Lauren great camera work not easy trying to film in a PC but what a transformation to the PC from what you had a much better build. I'm sure you will trouble shoot it ok. It's not easy using used components as when removed and refitted can sometimes lead to problems as this has shown. Looking forward to the next video and find out why it didn't boot up.

[@1.618_Murphy]

There's no way in hell someone gets his/her PC like that! 😦🧐🤔

[@blaqknite1445]

Good luck with the fix. Nice to see you again.

[@WarhavenSC]

8:58 -- **begins punch-dance montage**

[@MestreDentistaGUC]

Oh shit! Welcome back!

[@AuraPotato]

I have the cat sitting/walking on the power button issue as well ^~^ My fix has been to change the behavior within Windows, just choose "Do nothing" in the power options for when the power button is pressed. I think this is a better solution than rerouting, as you should be shutting your computer down within Windows anyways, and in the event of an issue you can still use the reset button or hold down the power button. Great video :)

[@moonman1209]

Happy to see you upload. I hope you're going great : )

[@garybenade]

You have such an amazing voice, like a breath of fresh air

[@jad1079]

This is the first TPC video I've seen in years. YT wasn't showing Lauren's videos on my homepage.

[@thux91]

Lauren is back

[@SenorRobertFixit]

Glad to see you again, thank you for the upload and always happy to hear you alive and making it happen..

[@keyr3733]

10:30 Because when you're dismounting radiator from not very fresh thermal paste, you need not to push up, but rotate radiator on the CPU to be sure it's not glued. And always keep pressing on radiator while mounting or dismounting it's brackets.

[@wadewilson623]

Comeback already don't go away for too long lauren⭐️🌺

[@samuelchan699]

Re: on CPU cooling, "it would take a level of upkeep that I just couldn't count on". It had never crossed my mind that ease of maintenance should be a very important consideration! Recently volunteered to refurbish a friend's computer. First, you are using much kinder words than I did when I opened the case. Once inside, I had to deal with spilled cola and had open the power supply to remove the insect casings that were inside it. The radiator on the AIO cooler was easily 70% clogged! I replaced it with a spare air cooler I had from an old computer. Although less efficient, it can be easily blown out with a can of air without removing any parts.

[@brandonfarfan1978]

This was really fun to watch and interesting too. That ending, lol. Also, good to see you back again. I think alot of fans were worried. And best of luck with troubleshooting that PC.👍😎

[@MrFloRolf]

great build so far! Can't wait to see the troubleshooting and how the performance/temps turn out!

[@ContrastTM]

That Fresh Prince reference! You always got at least one thing thats really funny in your vids. Good shit

[@ronr2445]

Very nice to see you posting again Darling ! ....We miss that voice !

[@Subdubbin]

This is SO good!

[@DannyOvox3]

TastyPC holy shit your channel is so nostalgic for me. I am glad you are still goin :)