i have a Asus Tuf Gaming RX 7800 XT oc edition paired with the Ryzen 7 7800x3d, and it smashes anything you play on it in 1080p, 1440p , and some 4k games, i always get high fps with max quality settings on all games ive played so far.

Could probably give you some pi's

The reason the screws were so hard to put in, is because of the powder coating itself. It is in the threading and you have to force the screw through it to get it to fit since the coating does make it smaller. Best thing to do with that situation would be to use a tap and die set, or similar, to clean the threading before putting in the screws.

this could be the best total in KZbin history

but why do you still use an older device? you have the money for this, but not the Galaxy fold6 😅

It took me up until reading the comments to get the joke in the title, as i literally read it as network components and not THAT

WIRELESS. ACCESS. POINT. my brain is rotten, period.

Looks great!

Darling I feel like you’re probably not using a pop filter 🎙️

3 years later, still laughing at that title 😂

Realizing how good this video objectively was made me really sorry to think of why I clicked on it in the first place.

I feel yuuked by this 100. Your setup is 😍😍

What on EARTH did i read

such clever titular verbiage indicates a master clickbaiter.

I read pink WAP.

i think many would fill your pi hole - but seriously, what case can you fit a pi hole 4b into that uses the poe hat?

title worth a sub

Thats one unhinged title

Unifi always gives me thefeeling of buying premium looks and premium usability. every peace i own from them is a bliss for my networks.

Got the same enterprise model at home 🖖 Personally I would get a big pc and run a bunch of VMs before getting all of the physical hardware. Just found the channel nice voice 🙂

I came for the Pink WAP

Nice setup.

You are amazing

This is an extremely well engineered build, with exacting component selection backed by a clear confidence of knowledge and experience. From compensating for specifics of the case and platform through to adjusting memory voltages to stabilize a slight overclock, she spits facts and knowledge without batting an eyelash. Even though that could be done for good effect, because they are nice lashes, and there are also ruffles, and curls. This is amazing content and we need more. :)

That title be doing the most

Your so talented when it to comes to pc and electronics. Ty for the awesome vids

ouf what a killer accent, melts my heart to my feet every time. But of course, great build video. Of all the trillions of billions of dollarzz in this world, why can't just a little drop of a million end up on my lap for a brand new lap dance, I mean laptop !!

ohno shes perfect

Beautifully constructed title 😭 Very efficient use of words to create three high class innuendos, genuinely impressive

@TastyPC I have the same card. Do you have these driver timeouts? I even sent mine to warranty and they sent me a new one back. Still had the issue. Thought it was PSU or Motherboard I bought new ones and I am waiting.

It's also possible to use pi hole on x86 systems of you got one, I usually deploy it as container. Also old laptops are great servers if you need something cheap and versatile

My love

i know this is a year old, the tuf 7900xtx is £899.99 and the 4080 super tuf is slightly over £1,000....so there is some incentive....but i am still leaning towards 4080 super because of the DLSS being so widely used.

the possi-boo-ities are endless!

Homelabber here: welcome to the club! Big fan of how this setup turned out, it's quite aesthetically pleasing.

ITASMR <3

Love this

May I suggest a 120hz portable monitor?

WHAT THE HELL IS THIS?! THIS MAN SHOULD BE ARRESTED

Not gonna lie, I came because the miniature (you know what I mean) but the content is gret

Nice clean setup!

Cringe. The video. The channel. Just...cringe

Elden Ring comparison!

The Sapphire Nitro+ and ASRock Taichi are top 7900xtx fan cards. The Powercolor Liquid Devil and ASRock Aqua are the top top of the 7900xtx cards. Pairing AMD gpu with AMD cpu gives a bit more frames also. I have an ASRock Aqua, its faster than anything but a 4090

Came for the title, stayed for the fluttering hand motions

I just installed my new XFX RX 7900 XTX Black Edition and was following the instructions in this video when I noticed the VRAM clock speed was spiked to 2700MHz and was stuck there while this video was displayed on the screen (whether the video was playing or was paused). The total board power hovered right around 100 watts. I did not have any games loaded. When I switched to a browser tab with a different website displayed, the VRAM clock speed dropped to 909MHz and stayed there. The board power dropped and hovered around 70 watts. As soon as I switched back to this browser tab, the VRAM timing and board power went back up to 2700MHz and around 100 watts, respectively. Prior to installing the latest Adrenaline software for the XTX, I used the AMD Cleanup Utility to remove the previously installed software. I also blocked Windows from installing its own driver. Prior to the RX 7900 XTX, I had an XFX RX 7900 XT installed and had the exact same problem. I returned the RX 7900 XT thinking it to be defective. I read there are quite a few people that have this problem with the 7000 series graphics card, but no one knows what causes it or how to fix the issue. Prior to the RX 7900 XT, I had an XFX RX 6750 XT installed and never had this problem. The problem is not specific just to the XFX brand, as the problem has been reported for 7000 series cards from every manufacturer. The monitor I am using is a Samsung 85" 4K QLED HDTV at 120Hz. There are no additional issues when I run a stress test. Anyone have any idea what causes this or have you heard any kind of fix? Should I try running DDU? I'm at a loss.

Suddenly remember about this channel after not seeing her content for years. Very glad that the channel is still going!

Thaks for making this vid I To see on how it looks before, and after cause, I really, really Want this Pc case

Thanks for this video, im in the process of etching my tempered glass-panel on a fractal torrent build im making, i was considering engraving it with my dremel as ive been doing many times before but thought of etching this time, your video has shown me and tought me some valuable lessons, i shall research further now and i might consider engraving it with the dremel after all. Keep it up <3w