FullBOOST garage is now open for business ! #broomysgarage #fullboost #fullboostgarage
Пікірлер: 51
@BroomysGarage22 күн бұрын
Check out fullBOOST garage here www.fullboostgarage.com.au/
@williamcrossan933322 күн бұрын
This is fantastic! However, I cant help feeling this relies too much on goodwill and trusting other humans. Let's hope I'm wrong. But It's a brilliant idea for a perfect world.
@STB-122 күн бұрын
I remember there were a couple of places similar to this in Melbourne many years ago, about time someone brought them back. Great job boys 👍
@302esky22 күн бұрын
Its was called U DO IT in Sydney in the 90s ..
@mwpaus22 күн бұрын
I don't understand why there aren't more of these around already. Such an obvious idea.
@Low76022 күн бұрын
Insurance and lack of ability of most people to actually repair Thier cars.
@mwpaus22 күн бұрын
@@Low760so I wonder how these guys are doing it differently
@ArchimedeanEye21 күн бұрын
Yeah could struggle with a lot of things, such as not having the right parts, accidents, not cleaning tools etc, will be interesting to see how responsible people are with this.
@stevegus284521 күн бұрын
Well done guys, the liability insurance must be astronomical, accidents happen but hopefully no numbscull spoils it for the rest of the enthisiasts.
@FredricksonZak22 күн бұрын
This is the go boys, good on you guys!
@knightrousoxide15 күн бұрын
Seen a similar garage concept like this open up in Castle Hill in Sydney a few years ago but believe it faded into non-existence. Hope this goes the distance!
@302esky22 күн бұрын
This was done in the 90s it was called U DO IT ... weld, paint, fully equipped shop ..
@MetalMania3DTV-TAS-AUS22 күн бұрын
Was this the 1 in Alexandria NSW Sydney??
@302esky22 күн бұрын
Yes there was one there as well and North Sydney as well ..
@MetalMania3DTV-TAS-AUS22 күн бұрын
@@302esky yeah cool, I worked a lot in the Alexandria one, back in 84 to 88, then move to Inverell NSW opened my own shop, was young back then 🤣☺️👍
@rc70ys19 күн бұрын
How do they stop people stealing tools or taking up hoists for their own personal use stopping others using them. I don’t understand it. I understand the concept
@BroomysGarage19 күн бұрын
@rc70ys this isn’t an unoccupied building that people can come and go as they please on some honour system. This is a manned business, so someone is there at all times.
@MetalMania3DTV-TAS-AUS22 күн бұрын
There used to be a shop cant remember the name it used to be in Alexandria in NSW Sydney, where you could do everything to your car, this was back in the mid 80s, you could hire the tools get tags swap them back and forth, spraybooth, mig welders nice to see it coming back 😊 awesome video 🇦🇺🤝🇦🇺🦘🦘❄️🌨🏔
@marktiltins884521 күн бұрын
There was one in Waitara NSW near the station called Self Help Workshop , early 70' s
@justinfargas236722 күн бұрын
Thanks for sharing Broomy.
@TheCanadianBubba22 күн бұрын
No cameo's from the crew ? Great to see you in the feed Broomy 👍
@@BroomysGarage- It must freak people out who do not know about the rotary"s to see them so compact LOL 👍
@TheCanadianBubba22 күн бұрын
Gave it a like on FB, could not comment there.
@ricardobarnao36922 күн бұрын
How does it go for insurance if there’s any incidents?
@gerrym7522 күн бұрын
I was thinking the same.
@fullboost22 күн бұрын
We obviously have insurance guys. Feel free to contact us if you have any questions.
@ianvader469722 күн бұрын
@@fullboost even if we're working on rx8's?
@benni72721 күн бұрын
you wernt there they found you down the road in the kerb
@jamesbaylis943822 күн бұрын
Twin 2 step rotary check, they hit a bit different don't they. It certainly is a great venue and can't wait to bring my Suby for its next head gasket 😂😂❤❤
@threefiftyone472621 күн бұрын
Can't wait to book a hoist for an hour then have the job go horribly wrong with parts not fitting, nothing going right ect, so I say stuff it and leave the car there for 6 months :)
@adamp.860322 күн бұрын
A set of corner scales would be good
@korkad20422 күн бұрын
McDonald’s car park will be quiet tonight😂
@shanefagan964222 күн бұрын
Its the new U DO IT garage. Its certainly not a new concept.
@blackhelven21 күн бұрын
full stocked BUT .....is the 10mm still in there
@Doc_in_the_carpet_truck22 күн бұрын
Great idea just a shame it's on the other side for a Keysy guy 👍
@BroomysGarage22 күн бұрын
I think if you have a hefty job to do, like change a clutch or a rear main seal, and lack proper tools and especially a hoist to do it, then the convenience and time (as well as physical strain) saved makes this a lock as a go-to option regardless of where you are in Victoria. With my gearbox jack and hoist, I can have my TH400 out of the rx7 in under 30 minutes. Without those, seriously catch me after 3 hours still working on jack stands rolling around in the bone cold concrete, arms and back ripped to shreds, struggling with just the converter bolts. Time is money. Place like this is worth its weight in gold for jobs like that. 2 hour return trip from outer or south east to do a job in an hour for total of 3 hours that would probably take 6+ at home and snatch the will to live out of you, sign me up 😂
@Doc_in_the_carpet_truck22 күн бұрын
@@BroomysGarage True dat
@Low76022 күн бұрын
@@BroomysGarage I don't like to use other people's tools myself, but I'm experienced at doing this stuff so working on my back is not that bad. But it will be interesting to see. I couldn't afford $50ph to hire a hoist years ago, plus if something goes wrong you have to leave your dead car there. But maybe it's not aimed at the young apprentice who needs to work on their car?
@wobblysauce22 күн бұрын
@@BroomysGarage And a nice day out, if all goes to plan.
@MrMazRx22 күн бұрын
!!!!!!!!!nice!!!!!!!!
@LucaS-es7ud21 күн бұрын
Can someone give more detail on what assistance is offered? Like is there a trained mechanic on hand to help/guide you? Or will someone just step in if your about to drop a trans on your head?
@BroomysGarage21 күн бұрын
Message them ? www.fullboostgarage.com.au/
@zorankp21 күн бұрын
Well, it's hardly going to change the car community forever.. It's a useful idea. But been done for years.
@benni72721 күн бұрын
i didnt see a welder so i can do my diff on the hoist haha
@orlyrx7CanutoUltra721 күн бұрын
Wao, Im about to move from USA to that place,Australia?? is outstanding.
@motorised122 күн бұрын
Lol rx8s
@davidhusband502221 күн бұрын
the fullboost boys bag out rx8s, then feature girly cars like toyota yarris, and do features on bogan commodores and falcons. lost a lot of respect for them.
@rc70ys19 күн бұрын
What if you don’t know how to use a hoist or some of the tools ? 🧰
@fullboost19 күн бұрын
You will not be loading any car onto the hoist yourself for safety reasons obviously. Assistance is available on tools etc. More info here: kzbin.info/www/bejne/aoOaoZyKm92kr6c