This will Power EVERYTHING on my Pedalboard!

[@djangomclear_rocks]

I have the same but but loads of noise with this powerbank when using ehx bass9 and synth 9, when using a regular psu, no noise. The connections on this one are not isolated

[@JohnPaulMusicUK]

oh really? thats interesting. must be how the power is being delivered. / Haven't had that issue... yet?!? Hopefully I dont.

[@Yosser70]

That a Christmas present sorted for my lad :) nice one mate 👍🏻

[@JohnPaulMusicUK]

Happy holidays! 😉 Link in the description to take you straight there. 👍🏻

[@eekamoose]

I bought one of these in February 2023 and am very happy with it. It was the only 9 volt powerbank that I had managed to find on the market after hours of searching over a couple of years. I was using USB powerbanks with small 5 V to 9 V step-up transformers and DC power leads that I soldered myself because I couldn't find a 9 V powerbank. The Harley Benton unit was simpler and much more robust than that setup. The additional 9/12/15/18 V selectable voltage available at output 9 is also very useful for other gear besides effect pedals. My unit works great, but there is one thing to watch out for: I just tried to use mine after putting it away nearly fully charged 3-4 months ago and it was completely flat, so I suspect that it may have quite a fast self-discharge. In future I am going to charge mine once a month or so whether I use it or not, just to make sure that it does not self-discharge to too low a level. Running a battery or a powerbank (which is just a box of batteries) down to totally flat is generally not good for the life expectancy of any type of battery.

[@JohnPaulMusicUK]

That’s great advice and excellent to know. 👍🏻

[@jodagold5481]

ooh cool i wonder if you can use it for headrush core ?

[@JohnPaulMusicUK]

The Headrush CORE needs 12v DC at 3A so it wouldn’t power it as the Powerplant can only push out 500mA. However, I certainly use it with an RC-600 that says it needs more. But the Headrush CORE is ALOT more power hungry.

[@ChrisRulewski]

Not available in Australia, sadly. I use the Joyo equivalent, however the 12V port on it doesn't spit out enough mA to power the TC Play Acoustic, but it runs everything else I need

[@scottbecker3485]

That‘s indeed a shame. Thanks for raising the point, for it will also apply to any other pedal that draws more than 500mA (as I just researched).

[@ChrisRulewski]

@@scottbecker3485 the Joyo one has 3 500mA 9V slots, however the 12V (adjustable) slot only supplies 300, so not quite enough to get the TC working. Still a good battery solution.

[@scottbecker3485]

@@ChrisRulewski Thanks for sharing this. Perhaps one needs to create a pedalboard with only effects that will work on this power supply. A bummer, but also an opportunity. ;-) And although I hope your Play Acoustic will live for long, if it ever conks out then getting a replacement got a lot more tricky (and presumable expensive) due to its makers (TC Helicon?) having gone out of business, or so I heard.

[@ChrisRulewski]

@@scottbecker3485 I run 2 separate boards, one all on the Joyo battery unit (including the RC600) along with 9 other pedals and switches. I have the Play Acoustic set on a separate board on a different power supply (requiring AC power) that can support it, and then just link the 2 boards together. If I need to run both in a "powerless" situation, I have a 300W power station to power the TC board if needed.

[@JohnPaulMusicUK]

That’s a real shame. Hopefully a solution is out there for Australia 🇦🇺

[@paulheartsongs]

Hi John Paul, I see you're using the power bank with the RC600. Specs on RC600 ask for 1.2 A (with phantom power), 1.1 A (without phantom power). Your bank says it delivers 500ma. Are you having any power issues with the RC600? I play couple of unpowered gigs each month and would love to use the RC600. Your videos are super helpful. Thank you

[@JohnPaulMusicUK]

Hello. I’ve not had a single problem with it with this power bank. I do not use fantompower with it at all and it has never cut out and it has been fine. The power bank runs the RC 600 and the TC helicon voice live play acoustic. I could probably get five to six hours out of one charge. Hope that helps.

[@paulheartsongs]

You bet, that’s great to know! The power is the only reason I haven’t jumped into the RC600. Time to upgrade, I think. Thanks again for all the info!! Time to buy some merch 😁👍🏻

[@AndiPicker]

Hey John, how is the unit standing up to charging/recharging after a year's use?

[@doctowers]

Hi John, same here.

[@seanmacmusic1]

Love it. Thanks for sharing John Paul. 🎼🎸😎👍🍺

[@JohnPaulMusicUK]

Glad you enjoyed it

[@GUIDESPERSPECTIVE]

Absolutely love mine. Solves all my busking power issues and my setup changes quite a bit depending on solo or with others. I am powering spdx pro, Rc 600 Small amp and a FS-7. My only complaint was even though they send a ton of cables it really doesn't cover me. Different barrel sizes and reverse polarity for my SPDX and my Spark guitar amp. It was a dissapointment to have to get more cables and do enough research to confim barrel sizes, voltage and polarity for different devices. Fortunately I discovered Birdcords. These guys are top notch and are really focused on musicians and all of our gadgets for connection solutions. It would be nice if Harley benton supplied a few extra barrel sizes to cover a broader range of device options. Other than that, this thing is a work horse. Love your board setup and it was because of this video that I bought one. Thanks,.

[@JohnPaulMusicUK]

Great feedback and yeah that would be great 👍 Mine is exactly the same. A workhorse and just hasn’t let me down (as long as I have charged it! 🤣) Gonna get another one.

[@rovenordiales]

JP! I have the Powerplant Powerbank Mk1 and also the Mk2. This is the solid solution for on the go rig! :)

[@JohnPaulMusicUK]

They are really well built and an awesome solution!!

[@banogadjo2601]

Thanks ! I was looking for a wireless solution for my effects pedals... Ive bought one and i will test it. A great solution !

[@JohnPaulMusicUK]

Great 👍🏻 Let us know how it goes! 😊

[@banogadjo2601]

i will @@JohnPaulMusicUK

[@mightyhammerhead]

Great review... Thanks

[@JohnPaulMusicUK]

Welcome. Still use it to this day and hasn’t let me down! 👍🏻

[@diarmaidok]

Nice John Paul, I'm looking out for a portable power supply for my tiny pedalboard, this has a lot of power though looks a wee bit chunky for me. I used to have that lekato wireless, I found that it sucked a lot of the tone out compared to a lead so I'd recommend using an EQ pedal to boost where necessary to overcome the tone loss...my lekato wireless unfortunately stopped working after a few months.

[@sebastianpintorojas9799]

Does ot fit in a rockboard 2.0 pedal board?

[@rayana4250]

Hey, quick question! Will it be able to power both the Boss GT1 and Boss Cube Street 2 at the same time for up to 4 hours?

[@JohnPaulMusicUK]

Great question. You would have to do the math. If they are both 9v then yes and you would just have to see how many amps it needs and how long it would run for.

[@JohnRundle-qp3ju]

Hi John Paul, do you know if this HB power bank is available in the US? It looks great! John R

[@notjustre]

Great thank you

[@JohnPaulMusicUK]

Welcome 🙏 Still use it and hasn’t faulted once! 👍🏻

[@hammingus]

Hi John, what would you say after a year of use (if you're still using it)? I have an eye on that thing for a while. Is it still a good buy? Thanks. Cheers

[@unamjay3529]

Love your video man. Now i can sleep well to powering my digital multi fx, knowing that few stage in my region aren't that good electricity. Nice

[@JohnPaulMusicUK]

Glad I could help!

[@smithmusicstudies]

That's INSANE!!!

[@JohnPaulMusicUK]

I know, right! Been brilliant 🤩

[@_Bachi_]

Hey Jp, great video. I picked one up recently and found that the cables provided do not fit into the Helix HX stomp. The power for the stomp fits the powerbank though, both being 2.1mm barrell. Strange. Any suggestions on cables to fit?

[@JohnPaulMusicUK]

Ahhh that’s a shame. You’ll have to find out what the mm is and I’m sure there is a cable out there on Amazon somewhere!

[@steve_one]

Thanks for the video, just wondering if you get a current doubler cable for the higher power consumption FX boards such as the Line 6 Pod Go/HX Stomps types?

[@JohnPaulMusicUK]

No you get single cables in the box so you would need to get a double cable to drive 2x 500mA

[@_Bachi_]

@steve_one the powerbank will power the HX stomp on its own but will have humming if you add anything else

[@pogpogger4381]

This looks great! Sad it cant ship to NZ. What wre the mA on the outputs as the rc600 needs 120pmA

[@JohnPaulMusicUK]

Yeah it’s a shame they can’t get it around the world - regarding the outputs it’s like this: - 8 Outputs: 9 V / 500 mA - 1 DC Output: 9 / 12 / 15 / 18 V selectable (max. 500 mA) - 1 USB-C input/output, both for charging smartphone or tablet and for fast charging of the PowerBank Hope that helps. 👍🏻

[@pogpogger4381]

@@JohnPaulMusicUK thanks! how does that work when the RC600 needs 1100mA with no phantom power? thanks

[@visharyamusic]

Hey john, I've a query about the boss rc 600 boss says it runs with AC,But you are running with DC power bank. Are you facing any problem?

[@JohnPaulMusicUK]

I know right? Nope. No problems at all. 👌

[@robertmiddel5582]

Hi, thanks for this video. I want to ask you...... Do yo uthink it can power the Neural Nano Cortex which requires 9v-12v 600mA.... I am asking because on website it is mentioned that the max output is 500mA per output

[@JohnPaulMusicUK]

You can change the voltage on the one output like I have for the tchelicon. The issue you will have is the 600mA. Too little power and the cortex might not power up. I would personally reach out to Neural and ask the. Specifically. I don’t want to give you wrong information that ends up destroying your pedal.

[@lovecraftmusic8717]

I have two HB power iso 5 pro (normal current powered supply) that give me noise issues with some pedals despite respecting the current draw and the fact that they should have isolated outputs...I was thinking if it's still the case with this one...cool that it is battery operating but are its outputs isolated?

[@mattgraham1203]

Hey John! A year on have you had any trouble with the RC600 with the 500ma output on this powerplant? The videos have been really helpful thank you!

[@JohnPaulMusicUK]

Wow! Has it really been a YEAR! My goodness! No. Not a single problem! (JP runs off to touch a big plank of wood! 🪵 🤣) But seriously.. no. It’s worked every time! Even did a gig where I was charging my phone with the USBC at the same time. Perfect. 👌

[@lgovantes1]

Great video JP. I looked into this but I have the VL3X that needs 12v 1A, so this unit will not work. Is there another suggestion? I also have 4 other-9v 500mA sources, and phone an iPad sources. Any thoughts?

[@DonaHannah-x8k]

I buy the artist power bank won't even run a small multi effects board with one distortion. Hope this one's better good video

[@JohnPaulMusicUK]

Always check the voltage and Wattage you need from your stuff. Get a piece of paper and a pen and go around your stuff and write down what it needs. Then, find the right one based off that. If it’s a battery based one, then work out that if you have all the stuff you need plugged in, how long it will last. Hope that helps. 👍🏻

[@TrailAmbience]

Nice setup. How are you running the tc helicon on your board? Are you feeding all other pedals into it then from tc to sound? (If so, is the guitar input where the other pedals are feeding into?) Or is it the opposite? Thank you

[@JohnPaulMusicUK]

Have a look at this: kzbin.info/www/bejne/Y327g56ga9d3qcUsi=ObT2KZhnOxuva0b1

[@NipperShelleyWinley]

Hey JP. I am using a TC Helicon and RC600 buy sm planning to at an Ampero Stomp II. do you think the Powerbank can do it?

[@JohnPaulMusicUK]

The Ampero Stop 2 has a weird power spec of 9-18v?!?! must be dependent on what its doing. I know the rc600 and tc helicon will be fine but you are already using up the variable voltage for the TC helicon.. so I dont think you will get away with it, unless the Stomp 2 stays at 9v.. which it sounds like it wont. Alternative is to have 2, one for the rc600 and tc-helicon and a dedicted one for the Stomp 2.

[@NipperShelleyWinley]

@@JohnPaulMusicUK Cheers Mate. I thought it wouldn't work. I like the idea of being cable free for busking etc. But thanks for the response.

[@ChrisMochinskiMusic]

Does the adjustable one jive with an HX Stomp XL?

[@JohnPaulMusicUK]

That might be a bit too powerful. It takes 9VDC which is no problem… but at 3Amps it’s a hungry beast.

[@lewisedwards1658]

How do you know which cable is center negative to power the rc 600 and would you need to us a doubler cable to increase ma ? kind regards

[@Aptmusicuk]

This looks awesome, quick question what camera do you use to record video, mines just bust

[@JohnPaulMusicUK]

Sony ZV-e10 with the kit lens. But I think there’s an up to date version now.

[@mickyj8412]

Looks awesome. Donyou think it could power a Hotone Ampero One, Joyo Compressor, Full Tone drive, and Joyo AC Tone without any hum from the pedals? Im also not 100% knowledgeable on power and outputs and what not, so my other question is, can i use ports that arent 500mah to power 500mah pedals? Does it send required ampage to power those pedals?

[@JohnPaulMusicUK]

You need to check the mAh for each pedal. If it’s under 9v 500mA then you are fine. If it’s over 500mA then you can get splitters to plug into two of the outlets of the power supply to combine the power to produce 1000mA.

[@mickyj8412]

@@JohnPaulMusicUK amazing! Thank you

[@SemtêxČØŴv2.0]

Really cool powerbank and a decent price 👍. I’m been looking for some like this but with a powered usb hub and isolated ports. Wish synth manufacturers would just fit separate power inputs to data. Gotta love usb audio interference 😵‍💫.

[@JohnPaulMusicUK]

Ha. Imagine that. A sensible solution! 🤣 yeah this power plant is awesome. Mad name.. but it’s so good!!

[@SemtêxČØŴv2.0]

When it comes to mad names no comment.

[@Robin_0011]

Can you use the cable that comes with it to power the RC600?

[@JohnPaulMusicUK]

Yes. I use the cables that are with it to power my RC-600 but without phantom power on as that would be too much for this powerbank

[@Robin_0011]

Can it power the amp too? What cable for that?

[@JohnPaulMusicUK]

That depends, and you need to be really careful with the voltage. You need to check whether the amp has the right connection, or you might need to buy a separate specialised cable. But unless the amp is 500 mA or less than I don’t think he will be able to .

[@MichaelCoughlanmusic]

How long will a charge last for a 9v digital multi modeller?

[@JohnPaulMusicUK]

How many miliAmps is it pulling?

[@vincenzofacchiano9650]

Hi. I would like to power the rc600, a 9v 100ma compressor, a 9v 100ma tuner and a controller that requires 9v 500ma (which I normally power separately because it can have interference if powered by other pedals). Is this powerbank suitable for all these pedals? I would like to achieve a result like yours 

[@tarkanyilmaz6905]

Do you uee a hard case for your pedal board?

[@JohnPaulMusicUK]

No. It comes with a robust soft case that the NUX Pedalboard fits into perfectly.

[@tarkanyilmaz6905]

@JohnPaulMusicUK what size is yours. It comes with three sizes apparently

[@fugalibrana]

I would like to know if this powerplant may work to make a Positive Grid Spark 40 into a full portable amp (it works with 19V). in Amazon theres a battery pack that fits with the Spark, but sadly I they don't send it to Finland where I live. I can order this from Thomann, that's why I'm asking. Thanks for the comments :D Cheers

[@JohnPaulMusicUK]

I’m afraid that’s the switchable connection only goes up to 18v 1 DC Output: 9 / 12 / 15 / 18 V selectable (max. 500 mA)

i dont get it about amperage. boss rc 600 loop station takes 1.2 A with phantom but the output of mk2 is only 500 mA (?) I saw that it has a double cable. But I own a multi effect that takes 1.3A not sure if i can power it. If I eventually get a triple cable (if such thing exists...) would it work ?

[@JohnPaulMusicUK]

So.. this is the thing. The RC-600 does indeed say 1.2A with no phantom power.. but I’m not using phantom power. Now when a circuit is too low the unit will just switch off or reboot (or short out.. but that’s a bad scenario). In regards to manufacturers, they put what it needs at the top end and are very conservative with their numbers. You need to find out what is the minimum the unit will run on. I have been using this battery since the video came out with the RC-600 and so far.. it’s performed flawlessly! In regards to a triple cable.. technically yes it would work.

@@JohnPaulMusicUK thank you for your reply

[@Jkbunting]

Am i ok to use 500ma for my 100ma 9v pedals and what is the 12v ma for on the battery i know its 400ma for the tc play acoustic

[@JohnPaulMusicUK]

1 DC output: 9 / 12 / 15 / 18 V selectable (max. 500 mA)

[@Jkbunting]

@JohnPaulMusicUK also I'm using the old rc 300 my singal set up is boss oc 5 - fender smolder OD- tc play acoustic - rc300 to pa. should I run my other pedals through my play acoustic into my rc 300 or will it cause latency due to the Di output for guitar on play acoustic. Thanks always great content you taught me so much

[@christinaraine2480]

So..,I've got a big pedal board....and many different power supplies. The infinity pigtronics looper, the digite voice live 3, the MI 5 effects pedal..... All use different power, the other three or four pedals on my board use 9 volt. Can I use this power brick?

[@JohnPaulMusicUK]

You’ll be able to use it for the three or four that’s 9v and one that’s different but you would possibilities need something that has more power for the ones that all need different power.

[@christinaraine2480]

Thanks man ✌🏻

I need help on this please... I was trying to go outdoor and play a little on my own for fun and sun. But I barely know anything on electronic. I just talk with a guy in a music store section and he said that I shouldn't be using a powerbank for the pedals as there is degradation and the pedals need a constant flow that is not regular on powerbanks. If you play plug into an outlet it comparing... it would have much better quality... I've seen some comparation videos between 9v and outlets here on youtube and you can actually notice I guess. But anyway... he then refer to accumulators that help to ensure the distribution of power i guess? He also said using powerbanks could cause static noise specially in certain pedals like distortion or compressors since they use more something... So my question is... This Harley Benton has these problems? Have you tried to supply power through a power bank to compare with this Benton powersupply/powerbank?

So i bought this. I think its awesome although from time to time i notice some issues with the usb to charge the phone, either the cable is not fitting properly or it makes some static for some random reason, maybe my cables were touching each other(?) and i ended up disconnecting the phone charger. Also it wont fit in the spaceship pedalboard underneat slots cause its too bulky which is disappointment specially both being Harley benton. And finally I have a multi effect pedal that requires 1.2A and for what I've seen this only supports 500 mA output ?

[@scottbecker3485]

Do you have a second one as a backup?

[@JohnPaulMusicUK]

No. Only just the one but could do for the future. I mean, for the price at £77, it’s worth doing!

[@scottbecker3485]

@@JohnPaulMusicUK Yeah, that‘s kinda what I was also thinking. For a gigging musician, having a charged backup could be a make-or-break thing, since nobody wants to start scrambling for wall warts and extension cords just before or during a gig, just in case disaster strikes. That said, I just checked the weight, which is just over 700g, so a spare would definitely be an item to preferably be left in the van until needed. In closing, THANK YOU very much for presenting this battery pack, of which I was not aware. This has me scheming and dreaming in new directions, including the creation of a small and compact pedalboard like yours that can run this way. Do you also have vocal harmonies covered by one of your pedals?

[@JohnPaulMusicUK]

yes. the tchelcion voicelive play acoustic.

[@markvv596]

I am debating to get this power supply because I am not sure if the different signals are isolated. I can not find it anywhere and hear different people saying different things…. So are they isolated?

[@rovenordiales]

Question: BOSS RC600 needs 1.2A current draw, do you just have a current doubler cable plugged into 2 500mA port? Does it suffice?

[@JohnPaulMusicUK]

Hey 👋 So here’s the thing. What it needs is based on what you are doing with it. The draw is based on the maximum possible output, and I’m sure they say it needs more just in case. So imagine using the RC-600 with 2 mics on phantom power at full volume. Yeah it’s gonna need a lot more power. I’m using 1x 500ma and it’s fine but that’s because I’m not using phantom and I’m not driving past 50% of the volume at gigs. I’m surprised as well. If I ever get that issue then yes I could use a doubler cable and get 2x 500 for it but it’s chugging along nicely. Maybe I should stress test this out.

[@rovenordiales]

@@JohnPaulMusicUK Defo! not a lot of videos telling people what current it needs. I know using phantom power it may need 1.2A and not using it much less but nothing in the internet that I can confirm this. That's awesome I might just use a current doubler, there's lots of power ports anyway on that Mk2! :))

[@jazzient]

I would be wary. We tried this unit with an RC-600, Sy-300, ehx Bass 9 plus an AKG receiver @12v. It failed three times.

[@ΓιώργοςΑβραμόπουλος-ρ2γ]

can you power up the headrush mx5? i ask cause it says that the 500ma is the max and i dont know how much ma this unit is :(

[@JohnPaulMusicUK]

It says on the back of the unit. The MX5 is 12v but needs 3.0A - that’s 3000mA.. so that’s a lot more power than the power plant can generate.. so unfortunately no.

[@RedKNotChiliPeppers]

@@JohnPaulMusicUK Any reccomendations for higher output for the likes of the MX5 or the Looperboard? (Without resorting to car batteries and inverters 🫣)

[@RuffusandRusselGaming9799]

How do you charge the power supply itself?

[@JohnPaulMusicUK]

USB - C in - I use an 18w plug I have for my iPad.

[@RuffusandRusselGaming9799]

@@JohnPaulMusicUK thank you 👍🏻

[@philmartin9486]

The RC-600 has a 1.2A power supply. No issues running off 1 - 500 mA port?

[@philmartin9486]

Curiosity got the best of me so I connected a lab power supply at a constant 9V and the RC-600 pulled a max current of about 630mA while I was pushing through it’s paces, trying to max the processor out. Probably some leeway on the Harley Benton specs making it most likely not an issue.

[@scottbecker3485]

Good question.

[@scottbecker3485]

@@philmartin9486 Upon second think, maybe he using a doubling cable of some kind to get more power draw? I believe such a cable exists, and the only drawback is blocking two ports.

[@JohnPaulMusicUK]

No. No issues. I’m not running phantom power at all so maybe that’s where the reserve is for the 2 XLR inputs. But it’s been fine and I’m so impressed with it.

[@JohnPaulMusicUK]

Hey Scott. Nope, not using a doubling cable. Just using one and works great. Again, I’m probably drawing not a lot of power cause I’m not using phantom on the system at all.

[@brandoncostner7437]

Can't be shipped to the USA

[@JohnPaulMusicUK]

Yes I believe so. Wondering if there is a USA equivalent?

[@brandoncostner7437]

@@JohnPaulMusicUKthe misison engineering 529 is twice the price and you have to buy your own battery 🤣

[@johnnygacoustic]

Has anyone in the US found this available? I emailed HB and they said there are shipping restrictions over seas. They hope to be able to ship but nothing on the horizon yet.

[@JohnPaulMusicUK]

If you find one, let me know and I’ll update the links on the video for people to buy it.

[@johnnygacoustic]

@@JohnPaulMusicUK will do! I am working hard on this! 😁

[@roloddt]

I see that there’s very little clearance on top of the power supply on your board. The power button of the supply seems to be on top. How do you turn it on with so little clearance?

[@JohnPaulMusicUK]

You are right. I originally used 3M (hard Velcro) to tape it to the board but then there was zero clearance. There is JUST enough room for me to push the button. The alternative I have been considering is to zip tie it upside down and press the button from underneath the pedalboard as I get it out of the bag. If the switch was on the side it would be perfect. 👌

[@roloddt]

@@JohnPaulMusicUK really makes me want to consider this haha Is that the large or medium Nux board?

[@JohnPaulMusicUK]

It’s the Large. With rubber spacers, you can make it a bit wider and put the RC-600 on the bottom if you prefer. Check it out here: kzbin.info/www/bejne/kJSXk5amhq9qma8

[@roloddt]

@@JohnPaulMusicUK Yeah, awesome. I also have the Large so maybe I’ll switch to this from the Strymon Zuma. Really love the idea of being wireless.

[@andrewhorth559]

@@JohnPaulMusicUK I've done exactly this (i.e. zip tieing upside down) and there is just enough space to see and press the power button + also see the charge indicators so all good (would post a photo if you could in YT comments!) - glad I didn't add the 3M stuff first! BTW thanks for all the great videos (in particular related to the RC-600) they've really helped me get up-to-speed as quickly as possible moving away from my RC-30 setup!

[@markcadier]

Would this power a GT1000???

[@JohnPaulMusicUK]

According to the power of the internet.. it needs 9v DC 670mA.. so you would probably need a dual split ABY cable to plug in 2x500 mA to give it enough power.

[@jst601]

Mega frustrating that we in the U.S.A. can not buy this pedal. Because of some goofy restriction, it can't be shipped to America.

[@JohnPaulMusicUK]

Yeah I believe so. 😔 There must be an alternative.

[@jazzient]

Be wary tho. This seemed like a good product BUT - we performed a day of playing in four outside venues for a town thinking this was the perfect power solution. It failed on us three times! We're powering: Boss RC-600, thx Bass 9, Boss SY-300 and an AKG perception microphone receiver (12v). So only 4 of the 10 outputs available. We use quite complex assigns on the looper and my theory is, it pulled sudden requests for energy when kicking in certain routines. The Power Pack shut down and restarted, killing our music stone dead, mid song multiple times. Very embarrasing and apologising while the systems rebooted, left looking very unprofessional. I will probably keep it to power the 12v item by itself but other than that - I don't trust it.

[@JohnPaulMusicUK]

That’s very interesting. Have you ever tried using a double cable to put 2x 500mA to get 1A out of it? Just curious. My assigns are pretty basic and it hasn’t failed on me yet including 2hr live stream, 2hr set in a field and 40mins on a stage.

[@jazzient]

@@JohnPaulMusicUK I haven't tried that, no. Not being very clever I didn't realise having two of the outputs into one would increase the ampage. I'll give it a try, thanks.

[@jazzient]

@@JohnPaulMusicUK Good news and thanks for the suggestion - doubling up the outputs seems to work better. I did try a test with powering a handsonic drum as well but this went too far and failed. So the moral is try it out first to make sure it can power everything you need.

[@SV-bg7om]

It seemed very interesting, then I read the reviews about the noise issues, so that turned me off... Let's hope Thomann fix that, maybe then I'll consider...

[@JohnPaulMusicUK]

I haven’t had a noise issue on mine to be fair and not just saying that as this isn’t sponsored. I bought this. Only heard noise (from the device not through the audio cables) when the battery got really low.

[@SV-bg7om]

@@JohnPaulMusicUK Yeah, just like I wrote... the reviews turned me off. I haven't had any experience with it and I'm seriously considering a HB power-pro with the AC connector. Glad it's working for you! Thanks for spreading the word about those!

[@JohnPaulMusicUK]

No worries. 👌

[@jamescorbett3039]

I purchased this a couple of days ago, love the idea. Sadly it’s introduced a lot of noise now, really disappointing 👎👎

[@rohclempedrena3026]

Do you have a buffer? Or a noise gate? Is your chain in a right order? This is an iso powersupply. Im pretty sure that your rig is the problem

[@abouttheedge4152]

Please help.... Im a few steps into this new world...

[@JohnPaulMusicUK]

Welcome to the new world . What do you need help with?

[@abouttheedge4152]

@@JohnPaulMusicUK thank you! 👋 pfffff everything.. the power plant just came! And im wondering what's best to plug into it.. 👍 👌

[@pvsnoir]

the mk2 is sooooo a downgrade in comparison with the first one. 10 outputs but only 1 that can have the voltage switchable ??? it's sooo annoying i would have bought it if i could power my quand cortex with it (witch was possible with the mk1).

[@JohnPaulMusicUK]

Ahhhh yeah. That’s fair. Shame.

[@TomWeeks328]

Sorry, I don't understand Why can't this power the quad cortex compared to the mk1?

[@TomWeeks328]

Hey please could you help me understand why the mk2 can't power the qc please?

[@philmartin9486]

Thomann will not ship to the USA because it’s “dangerous”. But I can get a 2500Wh solar generator shipped directly from China in 3 days. SMH.

[@timothy5974]

🤦‍♂️

[@JohnPaulMusicUK]

Damn. That’s a shame. Maybe worth seeing if there are any US stores that are Harley Benton distributors? Unsure though.

[@philmartin9486]

@@JohnPaulMusicUKI contacted HB. They were not aware of the issue. Reverb is their only US outlet, and unfortunately none of these are available. No worries. Love the idea and I bet I can source something else. Thanks for the video and the idea!