87 Johnson 6 Hp Conversion 7.7- 7.9? - THIS OLD OUTBOARD

It's This Old Outboard. 1987 6Hp Johnson Carburetor Conversion. 6hp to 7.7 - 7.9 ?
Follow the Real Life Saga & SUBSCRIBE TODAY !
You Never Know What's Gonna Happen Next !
It's This Old Outboard. YOU KNOW THE CHANNEL

[@danielrobert7181]

Wow ! Can't think you could get a better 2nd opinion on fine tuning that engine. TOO's infinite patience meets with Kodibass' unfathomable experience. Accept and share my respects with Mr Roberson but most importantly, you both take care and be merry ! 🇲🇶

[@THISOLDOUTBOARD1]

Thanks !

[@Fireship1]

Sounds like she’s running good now. Kodi and yourself should grab a sharpie and autograph that motor for the next owner. It would be a special edition!

[@THISOLDOUTBOARD1]

Hahaha. Thanks again ! Happy New Year!

[@BeamerTheFox]

sounds like it needs to be put on the back of your skiff an put it under a load an then tune it a little more, im sure its loaded up from the bucket runs. sounds a million times better ! nice work !

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@Ray56z]

I'm baack! Haven't been on the net since I inquired about you missing releases after the storm-ol' used up body problems. 1st channel I've gone to on YT, now to binge watch and catch up tomorrow. Fun tweaking hp out of these ol' gals huh.

[@THISOLDOUTBOARD1]

Hey. Glad your back! Yes Fun! Thanks for tuning in!

[@cozziwysong3905]

hey buddy good to see you still going at it that old stick stuff got me there for some time but happy late thanksgiving and a early merry Christmas

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Happy Holidays !

[@TimsWorkshopTJY]

Kodi has been gone for awhile so now we know where he migrated to for winter. Haha looking forward watching you two tackle this 7.? Whatever it is?

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@dalitohana6979]

Too Funny Kodi has arrived lol!! Great Video!!!

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@Wavezone304]

Awww Saturday morning TOO. Just waiting for my coffee to brew.

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@jimmyhoffa7935]

You mean your making Kodi work during his vacation? Can't wait to see you 2 goofs out fishing. 2 stroke smoke💨✌

[@rosebelleo38]

Can't wait for the video lol

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@THISOLDOUTBOARD1]

Hahaha! Thanks for tuning in!

[@OutBoardTink62]

Should of asked Kodi for him to bring down you a correct carb,LOLL! Great ending are you going to make more videos with Kodi?????

[@THISOLDOUTBOARD1]

Hahaha! He might stop back by. It was fun. Thanks again !

[@TheMentalmechanic]

Nice ending. I never expected that!

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@CL-ok1gx]

Love the content, smoking a cig and pouring gas. Wish I could listen to my J88 run year round.

[@craigtimmons3468]

I once knew a guy who on Newyears Eve run his car into a ditch, him and his 4 buddies were able to push it out and continue down the road a few miles before smelling gas, so he stopped and crawed under the car and lit his cigarette lighter and let me say that the aftermath wasn't very pretty, it made Freddy Kruger look like Miss Universe. The loss of all facial features including nose, lips, eye lids, 1/2 of the hair line, ears, both hands to the wrists, and 2/3 of his neck and chest skin was only the injuries on the outside, on the inside was the mouth, tongue, throat, lungs and stomach. Yes Alcohol was Involved. But whats more Amazing is this guy lived for almost 25 years after having many many surgeries but still looking like somthing right out of a Horror movie right up to the day he passed .

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@davidstoltze3461]

Good stuff

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@samleen]

The 8hp has a different reed valve configuration and ports. I also thought the post-1983 6hp was a 7.5 but rated at the propeller instead of the crank? I have the same metallic clank at idle that your motor does and believe that it may be either a loose magnet on the stator or the bottom crank bearing going out. Pretty sure that neither are fatal. The bottom bearing could be causing an air leak if it is bad enough

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in & thanks for the info!

[@gunfisher4661]

Good home work , shame there are so few models out there that can handle a carb swap for power.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@bobbell5928]

Smoke coming up through the lower cowling.

[@THISOLDOUTBOARD1]

Thanks for tuning in. Hope not! I'll have to put the hood on it, run it and see if it chokes out. Thanks again & Stay tuned !

[@MsJon52]

well that was a treat seeing mr bass, he is looking far too clean for my liking, I think some exhausts need a-cleaning, lol

[@THISOLDOUTBOARD1]

Hahaha. Thanks for tuning in!

[@vandos11]

those Belgium motors put that stupid 100:1 oil sticker on there screw that 50:1 baby

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@lyathanmcauliffe2778]

What is the best outboard to go with if you buy second hand outboard

[@fuji8410]

Very first thing I look for when buying a used outboard is good even compression across all cylinders. No matter the brand or how good it may run if it has low compression on one or more cylinders that’s a good indication of abnormal wear due to component failure. Also good indication it’s going to get real expensive real soon. Hope this helps.

[@THISOLDOUTBOARD1]

OMC! Thanks for tuning in!

[@artstates960]

Mix and match carb jets. Bump up the hp! Does that affect the amount of fuel the motor consumes?

[@THISOLDOUTBOARD1]

A little ! Thanks for tuning in!

[@benkanobe7500]

You don't happen to have a link to the original and larger jet do you? (Check your line voltage and frequency as your power company will reimburse you if less than 110VAC @ 60 Hz for partial payment on your Microwave)

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Original was a 32d, I put in a 37 and swapped to the older style carb. You can probably find what you're looking for and more on marineengine.com. Any outboard and parts. Thanks again !

[@victorremick9721]

All of the 4hp have a spring on the butterfly to force the butterfly to slam the roller cam back all the way

[@THISOLDOUTBOARD1]

Hey. Yeah they all are spring loaded butterflies, but without the right linkage it can't go! Thanks again !

[@jasonmoore5685]

Any of the prank dad and put three holes in the paper and put it in the binder💆‍♂️

[@THISOLDOUTBOARD1]

Thanks for tuning in! Happy Holidays !

[@vandos11]

if Kodi adjusted that motor it would throw a rod

[@THISOLDOUTBOARD1]

Ouch!

[@iboats1]

hi. you are instaling 9.9 carb on 6/8 hp block

[@THISOLDOUTBOARD1]

No I'm installing a 9.9 carb on a 6/7.5. Thanks for tuning in!

[@victorremick9721]

I wish i knew how to send you pictures I have 5-4hp all have straight lencage I have one scamatic for a 6hp the 6hp has a bend in the linkage LABELED #31

[@THISOLDOUTBOARD1]

Hey. Thanks ! I think I'm good to go!

[@cameronbehnke7017]

Lol kodi

[@THISOLDOUTBOARD1]

Hahaha. Thanks for tuning in!

[@searobin25]

I’ve notice if I have my Johnson reving @ 2000 rpm & if I hold the choke in it will power up more just with that extra fuel from the primer. So in theory am making more hp when the cyln is fed the xtra fuel. Makes me wonder why Johnson metered their jets to give so little fuel just the bear minimum for combustion.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Yeah I know what you mean.

[@jasonmoore5685]

And no core

[@THISOLDOUTBOARD1]

Thanks for tuning in!