Simple Duramax Mod | Fleece All Lights On Module Install: 2007.5 - Up Duramax

[@hardass912]

About time, an easier way. I did this on my 09 Sierra 2500HD, was a pain in the azz to wire up. Going to be ordering this for my 16 Silverado 3500HD!! Keep up the great install videos. Thanks!

[@thoroughbreddiesel]

Thanks! Is a pretty easy and cool mod to do to these trucks.

[@kastlrock557]

I just installed this on my 2022 GMC 3500 Denali Dually Diesel and it works perfect! Make sure you use a small flathead screwdriver to push the wires into the module securely, then put the clip on. The instructions say you can’t remove the final clip/cover, but you can pop it off with just your fingernail! When my fog lights are on, I can turn my high beams on and they fog lights stay on along with my low beams, so it’s really all lights on!!!! When I’m using just my low beams and then quick flash my high beams, they all come on (low beams, high beams and fog lights). It’s so much brighter, especially for me driving down dark gravel dirty roads.

[@2809Nick]

Wow that’s a fast and easy install just did it in 5 minutes

[@davidrayman3576]

GO WILDCATS!!! getting ready to install this on my 2021 RST just wanted to make sure the lights function as normal when on low beams thanks for the video

[@jackdaniels7913]

Grate video worked on my 2009 GMC Sierra Denali as advertised and as shown here! Easy install and well worth the time and money! 🥃cheers🍻

[@williamcordle-FLman]

Got to be careful and follow Wades instructions because this module is good up to 2020 Silverados on my 2014 there is multiple green wires with white stripes

[@fleeceperformanceengineeri9556]

Always reference the pin locations, the wire colors can vary by vehicle year.

[@remobigelow7821]

Just a FYI. I installed this in a 2011 lml Chevy. Wiring is correct but I had to take my wires out after first install and clamp them again. The grooves that cut the jacketing when you clamp it down didn’t cut thru the sheath of the wire the first time, that or it wasn’t making good enough contact !

[@thoroughbreddiesel]

Thanks for the info.

[@rpsmith]

FYI: Check your state laws before making this mod. Some states have a limit on how many lights can be on at any one time. Some that I know of are less than six.

[@williamcordle-FLman]

Yeah I’ve been pulled over for this before but if you turn your high beam off for on coming traffic you should be fine

[@ronniebenoit4081]

Texas is 4 lights on....but I live in the hill country and deere are a big problem. Not killing them fast enough. But,yeah. Be careful who you blind coming at you

[@fabiangomezjr4114]

Very big help loved the video!!!!👍

[@thoroughbreddiesel]

Glad to hear it!

[@SlyeDawg]

Do you have a video or color connector / color wires for 2017 silverado?

[@thoroughbreddiesel]

Give us a call 1-859-737-4966.

[@ronniebenoit4081]

Just installed my all lights on...easy simple and if you have big hands....get your wife to do it...lol. there's 2 green/white wires....I just picked one and connected it to the tan/white wire....bingo it's all lights on. 2013 duramax lml

[@CABswagg803]

Just installed this same product on my 2015 2500HD High Country and the connector u unplug from under the dash was brown on mine instead of black

[@Wodahs32]

Hello All, Please believe me when I say THOUGHROWBRED DIESEL ROCKS. The tech support and warranty department are very far honest people to deal with they have my business. Truth and honor is there mantra they live it.

[@brianbean267]

My high and low beams stay on with this install but the fog shuts off. Any idea what could be wrong. I installed it just the way you showed the green and white wire and the brown wire. It’s on a 2008 GMC sierra. I even double checked to make sure everything was tight.

[@pjkazpa8004]

Did you ever get this to work on your truck?

[@miguelcuriel5691]

Where did you get the diagram from

[@TB-id6wo]

I have a 14' GMC Sierra 2500 HD ... the blk plug is not the same. It is more rectangular. Wire coloring is slightly different also?

[@thoroughbreddiesel]

Verify your truck year, could be a 15. If so, you will be working with the brown plug.

[@TB-id6wo]

@@thoroughbreddiesel it states 14 on the registration but it could be a 14.5 ??? I will go look at the identification tags on the truck. Be right back 😬

[@TB-id6wo]

@@thoroughbreddiesel i found it !! was able to install and verify jumper is good to go !!! Thank you🤘

[@ssredd90]

How is this worth it? What’s stopping me from just splicing both wires and just running a wire across?

[@thoroughbreddiesel]

Purchasing this is a $20 some odd tip of the hat to the person that engineered it and gave you the correct wires to make this work.

[@abrahamestrada1176]

Dose it also work for the 2014 Chevrolet Silverado 1500 ,just got mine and this is what I want to do to it

[@99str3ngthx2]

Wayne, I put this module on my 2016 GMC Duramax and now I'm having an issue where my lights flicker over bumps which is extremely annoying. Can I just remove the module and electrical tape the exposed wire to revert back to stock?

[@thoroughbreddiesel]

Yes, recheck your connections on the module board and maybe you could fix before you have to remove. But if you have to remove it, make sure that you check the wires where the module was located to make sure you have continuity.

[@adalbertoarroyo523]

A 2008 Chevy duramax what color module brown or black please lmk

[@thoroughbreddiesel]

BLACK, it will be the exact same as this video.

[@alexharmon7325]

Would this be the same on the 1500 chevy? It is a 2011

[@thoroughbreddiesel]

Yes, 2007.5 - 2021 Chevrolet Silverado & GMC Sierra 1500/2500HD/3500HD.

[@adalbertoarroyo523]

What color conecter is it for a2008 Chevy same as the vid please lmk buddy

[@thoroughbreddiesel]

What kind of 2008 Chevy? If it’s a pickup, the connector will be the same as in this video.

[@adalbertoarroyo523]

Thank you sir

[@zachhuckabee7108]

Does this have a diode in it

[@731Zach]

Can you run Fog lights when highs on are off?

[@pjkazpa8004]

Yes

[@Neighbourhood_Brigand]

"whoooooo" with an opener like that, should be wearing a hat saying "original 'gater hater."

[@rylovlogs6756]

Is their an application for a 2008 trailblazer SS?

[@thoroughbreddiesel]

We are not showing that it will work for the trailblazer.

[@charlestiffany1526]

Are fogs always on with high beams or can you run high beams without fogs. I saw low with fog and low/high with fog. Not just low and high

[@joshuachilders129]

Huh? In the video, it shows that factory, with hi beams on, the lo & hi beams are on at the same time. With the module, hi-lo & fog are on at the same time.

[@Mcnutts3]

@@joshuachilders129 so it's just adding the fogs to the highs. Can you still run the highs without the fogs?

[@2thirtytwo]

I’m curious too because I had wired in light bar cubes into my fog switch on my aftermarket bumper. And I might just want highs and no fogs on some highways so I don’t get a ticket using off-road lights. Doesn’t look like you can considering the video never showed you can and no one is replying lol.

[@dustinday3951]

the module is just a 2$ diode

[@waynelong8336]

What are the wire colors for a 2017 silverado 1500

[@thoroughbreddiesel]

Pin 10 for fog side and Pin 18 for high side on the brown BCM connector.

[@ScottFanello]

If you have low beams and fogs on, switch to high beam, and back to low beams, do the fogs stay on or do they turn off with the highs?

[@fleeceperformanceengineeri9556]

Fogs will turn off with the highs in this scenario

[@giuliogiulio1]

Is it the same process for a 2nd gen dodge? I always though my fog lights turned off with my high beams but i could be wrong.

[@adalbertoarroyo523]

Can

[@dixiemae5042]

First

[@northtexasdumpsters9148]

Can’t you just splice the wires together

[@thoroughbreddiesel]

This gives you a quicker ability to revert back to stock.

[@northtexasdumpsters9148]

Thoroughbred Diesel so there is no diode or anything correct?

[@northtexasdumpsters9148]

Thoroughbred Diesel guessing it probably does otherwise when you turned on your driving lights the high beams would come on (right)?

[@cup_and_cone]

​@@northtexasdumpsters9148 There is a diode, that is what prevents the high beam lights from coming on when you command just the fog lights.

[@jessef3067]

This video is 11 min too long

[@bigsteve973]

Bought for my 15 duramax not enough slack in wiring harness to use this useless piece of garbage.