Kaiweets ES20 Cordless Precision Screwdriver Review

In this video we get to look at the Kaiweets ES20. This small cordless screwdriver comes with 120 bits and 17 other items and tools that will be handy on the bench. It has USB-C charging port, LED illumination with manual On/Off control and it also has a 2 speed mode. We take a brief look at the bits and accessories and then we take a look at the operation and features. Hope you find the video helpful and thanks for watching. I will have Kaiweets links below and the coupon code if needed. Thanks to Kaiweets for sending it over for us to look at.
5% OFF CODE: S27L7UH8
Ends on April 20
Link: www.amazon.com/dp/B0BQ72V5Y3
15% OFF CODE: TTS15
Available sitewide at Kaiweets.com
Link: kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets S20 130 N 1 (manual) Precision Screwdriver set:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets KM601 DMM with Color LCD:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets Alligator Clips:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets HT118A Digital LCD DMM:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets HT206B AC 600A Clamp Meter:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets HT208D AC/DC Clamp Meter:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets 23pcs DMM Lead Kit:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets ST100 MultiMeter:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets ST120 MultiMeter:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets Electricians Lead set:
kaiweets.com/products/kaiweet...
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
Link to Low Melt Temp Solder if needed:
amzn.to/3ozIJjm
Northridgefix.com also has a great Low melt solder
Link to Amtech 559 Flux if needed:
amzn.to/3gyg0qJ
Northridgefix.com also has this Flux
Amazon Link to Jewelers Screwdriver set if needed:
amzn.to/3THDqwd
Amazon Link to MG Chemicals #4 Braid Desoldering Wick if needed:
amzn.to/3CY2068
Amazon Link to 63/37 Rosin Core leaded solder if needed:
amzn.to/3RVOAMj
Link to OFLA Locking Blade knife if needed:
amzn.to/3BxMbSO
Link to iSesamo Spudger tools if needed:
amzn.to/3Sp9LGb
Link to DeWalt Cordless Gyroscopic Screwdriver if needed:
amzn.to/3Eevk8f
amzn.to/35TETZB
Link to Aftermarket 8V Battery for DeWalt screwdriver if needed:
amzn.to/3Ix4euv
Link to TOMLOV DM202 MAX Microscope if needed:
amzn.to/3Uy0RIF
Link to SKIL Screwdriver if needed:
amzn.to/36Ugtgv
Link to Cheap Spot Welder Board if needed:
amzn.to/3WcRwWA
Link to Tekton Mini-Flat Needle Nose pliers if needed:
amzn.to/3TyLuOr
Link to 1-8S Li-Po battery monitors if needed:
amzn.to/3UPkJGC
Link to Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed:
amzn.to/3UAl40e
Link to 200MHZ Rigol DS1202Z-E scope if needed:
amzn.to/35UVTLI
Link to Weller 200W Iron if needed:
amzn.to/30nzhT2
Link to Hakko 888D Iron if needed:
amzn.to/36TDWyv
Amazon Link to Conical Bent Hakko Tip if needed:
amzn.to/3B57IjD
Link to ProStormer Hot Air Station if needed:
amzn.to/3XIiKEY
Link to Desoldering Gun if Needed:
amzn.to/2SOTVIM
Link to M12 Cordless Soldering Iron if needed:
amzn.to/35XiFCp
Link to Board Holder if needed:
amzn.to/3881akA
Link to Flexible hose arms for helping hands if needed:
amzn.to/2TpkuFC
Link to Extra Long Security bits if needed:
amzn.to/2No9gxh
Link to 0-60V 0-5A Power Supply if needed:
amzn.to/4158YzL
Link to WD-40 Contact Cleaner (Plastic Safe):
amzn.to/2Yjo6e5
Link to DL24 150W Electronic Load Tester (Capacity Tester):
amzn.to/3Sd1RAU
Link to Longrunner Component Tester if needed:
amzn.to/3lXrZ1v
Link to FlirOne USB C if needed:
amzn.to/36VX1jn
iOS version:
amzn.to/2NqAP9q
Link to Rigol DS1102E Scope if needed:
amzn.to/35UVLvI

[@lockprousa]

Tool looks great. Do they offer longer bits, many times I need them when removing screws on power tools. Thanks RJ

[@ThriftyToolShed]

That is a good point. It is a really good assortment, but it does not come with any longer bits. Simply the short extension and flexible extension with this kit. I don't believe any longer bits are offered by Kaiweets at this time. The 4mm hex style bits seems hard to find longer bits in, but if you have a larger set of bits for the Wow stick or other kit for example you can use those 4mm hex bits with it also. The S20 kit does have a few longer bits, but not a large selection. Some longer bits would be useful for sure. Thanks for your comment!

[@paul_dz]

Looking forward to your long term opinion of this tool - I picked up one similar to this but gears eventually stripped - don't think it was really abused - just didn't last. It was nice to use though, when it worked. Hope the Kaiweets is made better - would like to get another one.

[@TheOneAndOnlyTBash]

just judging this company by the contactless power/multimeter you showed they make good stuff

[@SeascapeStl]

I bought one. Less than a week after Amazon's return period ended, mine started slipping. The motor runs, but the bit does not turn with the slightest load. It can be stopped with no effort using your fingers. I have been going back and forth many times using Amazon's app. The video I made couldn't be sent through Amazon, so I sent it to the service email and crickets. No replies from the email or through Amazon. Used it once to repair my bose speaker. Thought you should be aware.

[@ThriftyToolShed]

Thanks for sharing your experience. I honestly use mine all the time, hate to hear yours failed prematurely. Have you contacted Kiaweets?

[@SeascapeStl]

@ThriftyToolShed They reply days later asking some other irrelevant question. Now I get no reply from the Amazon kaiweets store or from the service support email

[@robdewhirst7525]

There are lots of screwdrivers with this design. I have owned B08LZ71TQ8 for about 2 years. The biggest problem is the placement of the light switch and how sensitive it is. It's too easy to turn the light on automatically just by handling the screwdriver. It should be nowhere near the forward/reverse buttons and be a slider, not a push button.

[@ThriftyToolShed]

Great point. Thanks for your comment!