Turbocharged F22C1 Engine Build (OEM+) - Full Start to Finish [4K] - S2000 AP2: Part 4

[@mbiservicedirectperformanc5840]

Quinn is an engine Jedi.

[@bachhoang736]

yeah sure ^^

[@Trekzaz]

Incorrect he is the force itself 🙏🏼

[@catman5029]

With a torque wrench lightsaber

[@vixcvi]

I like watching quin build engines, so much knowledge

[@meidoz5458]

More like he reads the brochure 😂

[@ROGENGINE]

Completely agree on that

[@andremartinez3000]

It's pretty impressive for being so young.

[@3Lb0r1]

Don’t forget to change the knock sensor they are brittle and will crack from just looking at them. As well as the starter they tend to grind on the fly wheel after just a couple years old. And the O-ring for the top sprocket for the timming chain. But also, you forgot the top O-ring for the vtec solenoid common leak area, you’ll most likely have to get it aftermarket from Kraken.

[@frankvanrijn964]

I can watch Quinn build engines all day long! His enthusiasm, combined with the informative way of talking us through the build, love it! Next up... something European? Like a BMW straight six? Or a supercharged Jaguar V8?

[@geoffwatches]

I agree wholeheartedly what he said, basically.

[@geoffwatches]

I agree wholeheartedly what he said, basically.

[@kevilgandhi]

Ya also agree

[@hendrickmanurung1992]

Rotary Engine Rebuild could be awesome Quinn, make it happen please 🔥🔥🔥 much love from Indonesia 🇮🇩

[@lgncars]

would be sick

[@Ordinary-drummer]

brrrp brrrp brrrp brrrp needs to be a quad !

[@villanerdica]

pantengin aja channelnya rob dahm , ada project 12 rotor itu

[@hendrickmanurung1992]

@@LvLdGhost already did bro , but we're talking about Quinn here

[@hendrickmanurung1992]

@@villanerdica udh bg, cuma kn kita pengen lihat si Quinn rakit mesin Rotary jga bg

[@xanneri8994]

At least once a week I think about selling my AP1 in 2015 and always feel a little regret, videos like this make it hurt all the more lol, even on the inside the s2k is such a beauty.

[@gogedo00]

Man Quinn is really HIM

[@ro63rto]

28:12 - gonna need an oil filter relocation kit.

[@patrick19gl]

I went for the comments for This

[@mattrenegar476]

yuuuuup. was wondering who else noticed this

[@Hawkdriver511]

Love his level of knowledge. Some of the best videos on the builds. You make it look look easy!

[@Boostisablast]

I’ve owned a turbo one for 11 years and it’s been broken in my shop for 5 years. I have other cars but this video just inspired me and she will live again!

[@newfie8181]

I can watch Quinn swing wrenches all day! Love how he explains everything and how they work.

[@taitsmith7173]

Quinn should have his own engine building masterclass. Also, I've been waiting on my Supra shirt since November.

[@pellegrini8419]

I enjoy watching engine builds as well. I just wanted to say that anyone with a bit of mechanical knowledge, a factory service manual, and tools can do this! Its like legos for big kids!

[@HigeYatsu]

Quinn, you gotta do a rotary engine build for your FEED FD--would absolutely LOVE to see that!

[@AmazingSpanoMan]

I've never been so excited for a build and sad at the same time. S2000 is my dream car let alone a built one.

[@Mercil355]

I would pay for automotive classes if Quinn was the instructor. I would pass too because he explains everything, even why things would break or what best practices he is following so well. I also like when anyone in the shop is joking about not knowing something but being clear that they don't know something. That is the key to learning and growing, admitting you don't know something.

[@adrianhernandez8820]

Would love to see that VG30 from the 300ZX get rebuilt!

[@jdmj0]

I think any popular tuner engine - LSx, EJ, Rotary, S54, EA888 - the list can go on and on! The rotary would make sense if you continue on your modernized F&F car series with the RX7? 😁😁

[@jz_jules]

engine rebuilds with quinn are always my favorite part

[@dailydriven991]

The Mad Scientist! These are by far my favorite videos on this channel. I’d love to see a rotary or LS build like some have said but top of my list would be a Porsche flat six or even a 944 build. They scream like nothing else and the engineering is incredible. Would be something new and cool for the channel too.

[@yoadaam2940]

Ported rotary engine would be incredible! Also a great chance to get an RX7 on the channel!

[@jp335i]

I love watching Quinn work his magic on engines! I think building a Mazda 3 rotor would be cool!

[@JpoT852]

Quinn is a magician in the engine bag tremendous work man 🤙

[@javiermadrigal7589]

Throtl team is awesome!! The videos are always entertaining and full of knowledge. Build a VQ35DE!

[@Ryan-xs1dh]

You should rebuild one of your follower's engines! jus incase, i got a 327 in a 67 chevy here in Cali, that needs help pretty bad 🙏

[@Laeeqahpaulse4031]

The master is once again at work making it look easy great job Quinn

[@vladimirarzadon]

Another job well done by the MVP Quinn! I love these types of content! Learning so much from them. Keep them comin' please! Flat 4 next? 🎉

[@haac4825]

Just having @ CAFE and watching the S2000 Engine Rebuilt. Just sweet. Throtl #1.

[@SpecificationR]

It's molded into the bottle the direction on how to pour the oil bottle (the little circle). You're pouring it upside down. Keep up the good work 👏

[@aaron38my]

Heck, just rebuild any engines in the inventory which u haven't touched. Watching ur rebuilds are damn satisfying. I'd send my engine had I'm not on the other side of the world.

[@joshuareid4933]

I'd love to see y'all do something with a BARRA engine some time!

[@kellgee35]

No shit, just said the same thing

[@BulliKid]

Love engine build videos! 🙌

[@SugarWolf09]

My favorite part of any build you guys do! So much fun watching Quinn tear down and rebuild engines.

[@stevehunter7190]

Love a good Quinn engine build video 👌🏻 enjoyable to watch and educational without being overly technical. Keep up the good work 👍🏻

[@Darkslide2AR-FE]

I love watching engine builds and this was an absolute pleasure Quinn. I look forward to your engine builds in the future.

[@alexstava]

I love engine builds, I'd want to do it myself

[@scott8277]

Always a pleasure watching and learning from your engine build videos

[@94andrae]

Been watching you guys for some time now, I’ve learned more about cars than I have from anything and anyone, thanks allot for the videos, one day I’ll have a car to modify as well.

[@axioaxis9539]

Quin is fire god Liu Kang of engines 😂 love watching the solo engine builds!

[@jimc6481]

This is excellent!!....Thank you. I reference back to your video during my build of my F20c1.

[@ricardosandoval4831]

there is something that is just so satisfying about watch engine build videos

[@TonysTechAndCars]

I am amazed while you were in there, you didn't clean all the old oil stains!

[@Killerconceptz]

This channel has grown so much with Quinn!

[@TheRealRobotMongoose]

I gotta keep voting for a Volkswagen VR6 rebuild. MK3 Jetta GLX with the 12v VR6. They sound so good!

[@fmvtec85]

It’s so satisfying, just watching him put everything together nicely and with care. 👍

[@tylerwestbrook9299]

Going to rebuild my F22, can’t wait to get started!

[@rayclaudio2574]

Thank you for this video.. i have a f22c1 sitting and this gives me hope

[@jacoblacroix9024]

Great video! Quinn killing it again on another engine build. He has a great knowledge on all the engine parts and explains everything he is doing! Keep up the good work guys😁! Hope to see you all on June 3rd !

[@corygrimsrud1474]

Definitely should have had those rods machined since you're using a different fasteners. Sure you can get away without it, but it's not technically correct. Also im really surprised you didnt open the ring gap up. The oe gap was set for a 200hp engine, this will likely run over double the factory power level. I dont understand why you wouldn't have opened them while apart 🤷

[@mickeymang6]

Facts. I would have replaced the rods AND pistons. Full head machine work and block. This is just basically an OEM rebuild with ARP hardware. Might hold the power, but for how long? I think THROTTLE has a set budget for these builds and doesn't want to go over that. If it was their car to keep, I think they would go all out.

[@fmsdaman1]

Factory unopened engines run fine even at 600hp for years. Been done a bunch of times. I'm sure it will be fine, plus if the kit ever comes off because the new owner wants to go back to NA the ring gap won't be too large.

[@abrakadabra5023]

GOD I LOVE THE S2000 SO MUCH

[@babypinkbean]

Skipped the last 2 episodes real quick so I can watch the engine build 😂 ill go back afterwards

[@Peteblz1]

Engines build videos are my favorite. So cool! Quin be like hold up. Measurements montage. ❤

[@Mario-go5qo]

FINALLY MORE HONDA BUILDS 🙏🏼 I would LOVEEE to see a FG4 2015 civic coupe si build !!

[@DoHHHH26]

Beautiful video, he made everything look very effortless.

[@isse009]

I think you should rebuild a Volvo T5 engine and put it in the 300zx; would be awesome :)

[@Joey-rx3qv]

These videos are amazing. Good work boys.

[@justinreed659]

I wish I loved anything as much as Quinn loves fluid dampers... 😅

[@NuSwayze07]

Top notch workmanship Quinn 🔥

[@philliphoward5113]

Love watching Quinns engine re-builds, really interesting maybe a rotary re build or a Golf VR 32 re-build ?

[@Fk8_Theory]

People like Quinn are a valuable asset

[@I.LikeCars]

Not sure if it’s just the camera angle, but is there going to be enough clearance for the oil filter when the turbo is fully installed?

[@arturojsoler3]

this is therapudic ! thank you so much for making videos like this ! cannot wait to rebuild my F20C!

[@jordieduffell7914]

Man he's good with that sealant tube!

[@is2fiddy3]

Quin is a boss! I enjoyed watching this.

[@gorillawarfare7523]

These engines look so relaxing to build. Wish I had a garage or money to start.

[@dmurray1200]

These are my favorite videos on here

[@roholl517]

You should rebuild a VG30......

[@avisimal8629]

I would love to se a VG30DETT

[@DawahTrucker2024]

Quinn is an amazing mechanic geek

[@TheHenryDaBoss]

any reason for the k&n oil filter? I heard you're only supposed to use the oem filter as honda uses a special filter specifically for the s2000

[@pandaslayer]

how about a boxer build, maybe a newer FA20DIT?

[@vinuyajohn719]

Damn i really love seeing the Modern Eclipse🔰🔥🥺🇯🇵

[@MakingSimpleHard]

The 1.8T out of an old golf or gts jetta would be a sick rebuild. they can be a little annoying, but a lot of fun regardless.

[@fettyvsop9935]

We really have to appreciate quin work

[@jermainemorgan171]

Smooth video bro bro. Respect from Jamaica.

[@jorden5652]

Man i love watching Quinn build an engine!

[@MrCrowley925]

Can y’all do a k20z3 or a k20/24 that’s would be a nice build for a fg2 or a fa5 thanks again for all the awesome videos much love

[@immortalrises4299]

Quinn makes it look so easy, great job. Adding Quinn was a great decision, he is so knowledgeable

[@job-naxco.1611]

Gotta get out to FuelFest LA to see the cars and meet the crew. 🤘🏽

[@throtl]

Please do!

[@filip000]

Do a VQ37HR with a supercharger!

[@joshuajobin2170]

Cobalt SS Build would be sick!! LNJ with a turbo kit would be so sick

[@laloguerrero6757]

Underrated VR6‼️‼️‼️

[@joshuaarango9973]

Lmao I love how the oil filter disappeared once Quinn slapped the turbo on 😂😂

[@mattrenegar476]

came here looking for this comment lol

[@indycog]

Bought one of the new shirts and plates! I love the JDM merch!!!

[@kuxoverlandingtrailingadve5047]

Very Nice Gentlemen! Keep up the great work

[@DimZin]

Best build mods for those and the k series engines are bolts/studs,head gasket and block guard. Everything else has been taken care by Honda

[@gymmy972]

Killin the engine game Quinn. Keep it up man!

[@adammorris7003]

I feel like you guys should definitely do an OM606, that'd be badass!

[@albertocordero2628]

what was the whole point of pre-filling the oil filter if you were just gonna rotate the engine and have a drip out..?

[@richardfarmer6570]

Great video Quinn, thanks for the detailed explanation.

[@kellgee35]

Definitely an FG Barra swap. Go XR6 Turbo and chuck it in a hmmm, not sure, something crazy. 28:53

[@mylesbestianich5045]

H22A! ive always wanted to see a full prelude engine build with turbo

[@Selfinspired82]

Love the engine build series...would love to see either a bigger engine mayber LS or a rotary/dorito

[@SunoPics]

time for a Ej build! would love to see a hybrid ej25 block with ej20 heads

[@PotatoGamerNOS]

I would be over the moon for a 3sge/3sgte build

[@Lost10mm.]

Thx for the oil baffle tip.

[@nstorm390]

Good job Quinn!! I want one of those ratchets he used to spin down the rod nuts. Would make life easy for me. lol

[@ادهمرستم-ل5س]

I hope that you will add an Arabic translation, your follower from Syria, and I love your content very much🤍🤍🫶🏻

[@GrabUrSnacks]

Kinda wish they painted part of thr block, either way quinn always does an amazing job

[@victormateo4618]

Either a 3sgte or a 5sgte would be dope

[@goodcitizen7064]

Great content, as always! I think you guys should do an old Mazda, Ford Probe GT. I loved mine and it was a super fun car! They look awesome too!