How To Install a Widebody Kit on ANY Car! [Bolt-On Over Fenders : Full Tutorial] - Streetfighter LA

  Рет қаралды 533,446

throtl

throtl

Күн бұрын

Пікірлер
@throtl
@throtl 4 жыл бұрын
Hey sorry guys! We had to re-upload this to correct one error! If you're watching it again, smash the LIKE button to show your support!!!!! PS: We're ALMOST to 850,000 SUBSCRIBERS!!!!! WOO! --Evan
@Stockish_G20
@Stockish_G20 4 жыл бұрын
I got the same car but blue and convertible stick 6 speed
@riyadshaikh1067
@riyadshaikh1067 4 жыл бұрын
Plz do the next video, explaining all the wheel fitments for previous wheels and new wheels to be fitted etc., I'm really looking forward to do this to my car *Fingers crossed* :D
@ryanbeck4826
@ryanbeck4826 4 жыл бұрын
Please paint correct the BMW!
@dylanmonroe239
@dylanmonroe239 3 жыл бұрын
do the screws u screwed into the body kit come w it??
@crisfher
@crisfher 2 жыл бұрын
How much will cost that? i would like the same for my 325i
@TheNatofoxtrot
@TheNatofoxtrot 4 жыл бұрын
Hey Mickey, would love to see a moulded fender look on one of the Throtl builds!
@itsbeetlebby
@itsbeetlebby 4 жыл бұрын
Will be kinda pricey but it would be soo good it would make the whole kit flow much better
@mickeyandrade3435
@mickeyandrade3435 4 жыл бұрын
Molding fiberglass to steel is a no no in my book. It can be done well but is always prone to cracking. Too much risk for little reward.
@MeSessum
@MeSessum 4 жыл бұрын
Agreed. Molded look always looks way better.
@franklatin2411
@franklatin2411 4 жыл бұрын
Right not of a fan of seeing bolts on the fender
@RipPhillips
@RipPhillips 4 жыл бұрын
@@mickeyandrade3435 what would be an alternative to that? Metal fenders welded and buffing it down
@andreworth8493
@andreworth8493 4 жыл бұрын
Now that is the PROPER way to widebody a car! Love the attention to detail!
@denneeee
@denneeee 4 жыл бұрын
Team early! Was watching this when it was still titled "How To Install a Widebody Kit on ANY Car! [Bolt-On Over Fenders : Full Tutorial]" :P
@throtl
@throtl 4 жыл бұрын
Thanks for re-watching and commenting!!!!! :)
@dawsonramdass1145
@dawsonramdass1145 4 жыл бұрын
Lol yeah what he said
@ronjalupontanosa8536
@ronjalupontanosa8536 4 жыл бұрын
Loving the build guys! And appreciate the effort Mickey and Ricky is putting into every thing they do! 💯🙏
@oskrmatamoros94
@oskrmatamoros94 4 жыл бұрын
I dont know, the kit and the wing does not look so good, like it is too much or it is made for another car. Anyways, I love your work and your builds so I hope it looks awesome when its finished.
@PROFESSOR_TV
@PROFESSOR_TV 4 жыл бұрын
The body kit looks too wide for the car.. It's big and will look big even whit wheels imo
@adamgallaher8784
@adamgallaher8784 4 жыл бұрын
PROFESSOR - Apex Legends videos they could make it work! The rear ended is just not aggressive enough for how wide it is lol!
@PROFESSOR_TV
@PROFESSOR_TV 4 жыл бұрын
@@adamgallaher8784 they can definitely make it work yeah
@harkiibeats
@harkiibeats 4 жыл бұрын
well it just needs spacers now, after the spacers are installed the car should look normal. I wish they actually added the final build at the end but oh well
@khmerghost
@khmerghost 2 жыл бұрын
As much as the widebody kit looks awesome but I gotta advise on not using fiberglass as the material. I used it for like 2 years tops and it started to crack . A better one would be 3d printed or just aluminium metal. Not too tight on the nuts and bolts on the fiberglass because they are actually fragile than they look. Id use a rubber washer to protect the fiberglass from being scratch cracked by the rotating bolt and vibrations. Good content guys 😊
@gabrieldube19
@gabrieldube19 4 жыл бұрын
Throtl guys: lets wear a mask during the Covid Also Throtl guys: lets sand some fiberglass and bondo without a mask Love the build guys keep it up
@bushtruck
@bushtruck 4 жыл бұрын
Just stared my channel, I take trucks into the mountains and break em. I just wanna make some people laugh
@issakeyboard5444
@issakeyboard5444 4 жыл бұрын
Bush Truck you really are making me laugh these wack ass promos are too funny
@cleancar8553
@cleancar8553 3 жыл бұрын
@@issakeyboard5444 lol
@julianhernandez9351
@julianhernandez9351 3 жыл бұрын
Paranoia. The mask is for control.
@xutsider
@xutsider Жыл бұрын
when widebodying, is it better to use spacers/adapters or get bigger wheels/tires?
@geraldrogers9481
@geraldrogers9481 4 жыл бұрын
Great episode 👌 love how explanation of drilling, cutting and prepping for wide body.👌 Throtl team giving me many ideas how to do things on my S-14 like flocking, coilovers and etc. Keep bringing it 👍👍👍
@lisandrorivera9645
@lisandrorivera9645 3 жыл бұрын
Hello guys from Ocala Florida, love the way you guys explain everything in detail .. boricua pa lante
@Saponiboy227
@Saponiboy227 4 жыл бұрын
You can’t beat the Mickey and Ricky combo
@ChuckHickl
@ChuckHickl Жыл бұрын
Let's be honest, Mickey's beard at the end there as he's doing the walkthrough is incredible! Would love to meet his stylist.
@juangouveia8098
@juangouveia8098 4 жыл бұрын
best wide body mounting i have seen. ussually these things are half assed. great job!
@itGlenn
@itGlenn 4 жыл бұрын
Got to love C.A.D (Cardboard Aided Design)...😂😂😂 In all seriousness, it's probably the smartest thing that I have ever see; You can get the rough shape of what you need and you can fit it as close as you can so you only need to cut it once or twice (which saves time AND money). Then after its what you want you can just "polish it up."
@monsieurstone5905
@monsieurstone5905 9 ай бұрын
Hello, quick question why do you have to cut the bodywork to install the kit? I don't see what the point is. THANKS (1:25 )
@MarchelloHancock
@MarchelloHancock 4 жыл бұрын
Thank you guys for this video and specifically on the e92 N54 platform; very few people running full builds these days on my car. Also, I just watched another channel’s video on installing a widebody kit for an e92 335i and it made me cringe. Thank you again for a well done video and result.
@ericgon46
@ericgon46 4 жыл бұрын
The attention to detail with their work is sick to watch!
@PumpkinDefender
@PumpkinDefender 4 жыл бұрын
Evan: “This E92 is my new daily.” *immediately widebodys it* lol
@ronmaster09
@ronmaster09 4 жыл бұрын
The quality production of this video is pure 🔥. Keep at it boys
@Drake_Dawley
@Drake_Dawley 4 жыл бұрын
Dang the kit comes paint matched!!! 😂kidding
@vimangunawardana6104
@vimangunawardana6104 4 жыл бұрын
You’re not 100% wrong tho😂
@Drake_Dawley
@Drake_Dawley 4 жыл бұрын
@@vimangunawardana6104 from 10ft away with an iphone im sure it blends in
@vimangunawardana6104
@vimangunawardana6104 4 жыл бұрын
Drake Dawley I just realized, with a good distance it looks like a perfect car lol
@frankvanrijn964
@frankvanrijn964 4 жыл бұрын
As much as I respect you guys and the skills you have, for me this totally ruins the look of the car. But still interested how this turns out after painting and new wheel fitting!
@juice319
@juice319 4 жыл бұрын
i think it looks good
@almightyalan8942
@almightyalan8942 4 жыл бұрын
Ur wack
@brianmclendon1647
@brianmclendon1647 4 жыл бұрын
Your right this is the ugliest body kit I have ever seen, the wide stance is ok but the M3 fenders are plenty wide for these cars.
@hippotesttokill750
@hippotesttokill750 3 жыл бұрын
I think it looks hot just the fitment and spacers are needed
@kennynakato3109
@kennynakato3109 4 жыл бұрын
Mickey I love the content and your knowledge base. With all do respect my man, you gotta wear a mask or respirator when grinding the fiberglass from when you had to separate it from the over fender. Gotta protect those lungs my guy! Over fender install looks great btw!
@knull1320
@knull1320 3 жыл бұрын
Newbie here. If you arent lowering the car is it necessary to cut the fenders?
@habanero5.054
@habanero5.054 4 жыл бұрын
I’m ngl I hate widebodys cuz cutting and stuff and I hate all the hack jobs people do but you did a great clean job on this one
@robertomedinaj7090
@robertomedinaj7090 4 жыл бұрын
Uuufff coming real nice and 14:51 Ricky is working wit the Thingy Malingys the new name for the overfenders 😂😅🤣😂🤪😜😂🤣 me he reído tanto jajajajaa keep the good job 💪🏽💪🏽🔥🔥🇵🇷🇵🇷🇵🇷🇵🇷🇵🇷
@Solider21111
@Solider21111 4 жыл бұрын
Already 800k subs you crossed a lonnng way guys great job keep it up
@juwanrollins8247
@juwanrollins8247 2 жыл бұрын
I got one question, how do you know where to put your cut line, is it just preference or do u actually have to cut in a certain spot
@najminrzm
@najminrzm 4 жыл бұрын
13:16 Rickie being flex his muscle 💪🤣
@akjark7635
@akjark7635 4 жыл бұрын
the thumbnail tho!! looks fire with those wheels
@DamonBMW
@DamonBMW 4 жыл бұрын
Just hate that you see the bolts. Always makes me cringe a little bit. Love the build but this was a no go for me. E92 looks pretty mean stock :p
@SekeNoLike
@SekeNoLike 2 жыл бұрын
This comment, just voicing opinion but not putting people down. What like specifically makes you not like the bolts??
@instinct_7866
@instinct_7866 2 жыл бұрын
the blots add +10 street cred lol fr tho why dont u like the blots?
@gottemin4k
@gottemin4k Жыл бұрын
facts ion know what it is but the bolts throw me off to
@DamonBMW
@DamonBMW Жыл бұрын
@@SekeNoLike the fact that its not smooth anymore. It makes it look like a Miata or S13 driftcar to me. A BMW should be elegant and smooth. Even with a widebody ( in my opinion )
@1millionsubs300
@1millionsubs300 Жыл бұрын
Yall tripping the bolts make the car look aggressive I fuckin love the bolts
@jpmotorsport4728
@jpmotorsport4728 4 жыл бұрын
You guys rock ! Such sick builds guys , best in the business , looks so sick ! Stay safe guys , Peace
@red_dragonracingsilvereclipes
@red_dragonracingsilvereclipes 4 жыл бұрын
use POR 15 Mickie on the bare metal inner's that Rickie made it protects better against rust since it is a very high zinc phosphate primer paint i switched to it when I talked to my paint guy. He said it is allot like etch prime but better any rust can get coated and it converts it to a phosphate shell stopping it died in its tracks and it also protects bare metal from rust and they also have chassis black paint to spray over that and its double protected.
@gregvanwho2868
@gregvanwho2868 4 жыл бұрын
Is there pieces missing from the rear? The over fender looks like it just cuts off at the bumper and sideskirt on the rear....
@grahamalldred7769
@grahamalldred7769 2 ай бұрын
Hi guys. As per my opinion, this is the best car, and video EVER. The end result is just awesome 👌 👏 👍 😍
@nicoya4rmdabay
@nicoya4rmdabay 4 жыл бұрын
Update on Honda FREK9????
@arunabm945
@arunabm945 4 жыл бұрын
@throtl the two piece front fender may be designed like that for easy replacement , any way now it looks great
@mickeyandrade3435
@mickeyandrade3435 4 жыл бұрын
Nope. Street Fighter LA actually instructed us to do this.
@andronin8228
@andronin8228 4 жыл бұрын
Will there be Part 6 ?
@jamestehuna5915
@jamestehuna5915 4 жыл бұрын
When is the next episode coming back on
@lilboyluci7974
@lilboyluci7974 Жыл бұрын
I have a 2011 328i and I’m lookin for body kits lmk
@adamtench4447
@adamtench4447 4 жыл бұрын
You boys and Teej will literally widebody anything 😆
@mickeyandrade3435
@mickeyandrade3435 4 жыл бұрын
Yup!
@alanpaulick7815
@alanpaulick7815 3 жыл бұрын
Really appreciate the Lesson in wide body flairs. Awesome video
@bigd33103
@bigd33103 2 ай бұрын
Did you guys paint the top of the fender well metal panels before you welded them in? What recommendations do you guys have?
@Schweinehaus
@Schweinehaus 4 жыл бұрын
Mickey, have you guys considered getting a small planisher for doing that metal work? it would definitely help you guys get some of those more funky shapes a little easier, with a little practice they're easy to use.
@ELTORITO5150
@ELTORITO5150 Жыл бұрын
what happens if you don’t seal your fender at all after cutting?
@TheDuke085
@TheDuke085 11 ай бұрын
Rust. But certain fillers will take car of that.
@darthnickdo_
@darthnickdo_ 2 жыл бұрын
can anyone tell me what the tool shown at 7:21 is? thank you :)
@simplychillin78
@simplychillin78 2 жыл бұрын
I have a black 2003 Mercedes clk 320 in immaculate condition. How much does it cost approximately for a wide body kit installed to the finished product?
@jamesfcookjr
@jamesfcookjr 4 жыл бұрын
Throtl ViP squad Good afternoon Mickey, Rickie, Evan, Rick, Victor awesome video on the street fighter wide body BMW kit it would be awesome if street fighter made a cool Miata kit for the NA 🤔👍😃
@garrettowens7718
@garrettowens7718 3 жыл бұрын
Not digging the way the rear meets the side skirt is that part of the same kit or skirts are from another brand?
@sanjuan240
@sanjuan240 4 жыл бұрын
This video just reminded me that I need to properly seal my overfenders
@jamest5149
@jamest5149 4 жыл бұрын
Mask down to the flair mounting holes then put your liner/stone chip spray in the wheel arch and new fender liner metal, top and bottom.
@rubenrobles7275
@rubenrobles7275 4 жыл бұрын
Hi, could you post a video on how to do the rear door cutout on a 4dr when mounting wide flares, and a small portion of the flare, overlaps the door?
@imnota
@imnota 4 жыл бұрын
Am I the only one who thought of those cars from the 2000's that had custom diy body kits made out of foam and a metric ton of body filler as soon as I saw sponsored by bondo
@EnVo7
@EnVo7 4 жыл бұрын
Probably could have used a fender roller on the sheet metal to shape the wheel well
@johnnytacosauce
@johnnytacosauce 2 жыл бұрын
Thats what i thought too!
@HeyLookItsThatGuy
@HeyLookItsThatGuy 4 жыл бұрын
Those fender cuts were cleannn
@Jo-tm6jn
@Jo-tm6jn 3 жыл бұрын
Hey man, do you know by any chance what's that type of lip/spoiler called?
@johncooper9976
@johncooper9976 3 жыл бұрын
Have you ever put that wide body kit on a Square body pickup? If not or if you have, do you want to on my C10?
@bryanb3389
@bryanb3389 4 жыл бұрын
Love the videos! Food for thought... when mixing sound on your videos turn db down on your music.. the vocals are around 60% and music is at 120%...
@MrZiggy1979
@MrZiggy1979 11 ай бұрын
Hello I have a 2006 Lexus rx400 where can I get those pieces you used..I like how wide it is
@BlackTownie999
@BlackTownie999 4 жыл бұрын
Can you guys do a Panther chassis Lincoln Towncar build sometime? Like '04-2011? And do like everything you would do with a big BMW or Mercedes....And swap out the 225HP 4.6 for a coyote or something?
@jefflucas_life
@jefflucas_life 2 жыл бұрын
What bolts size did you use to attache widebody kit?
@kevinsweetwater7293
@kevinsweetwater7293 4 жыл бұрын
What type of drill bit did you use to drill the holes in the trunk? Thank you
@alexbartlett9396
@alexbartlett9396 3 жыл бұрын
Are these flares universal? Been looking for a rocket bunny style kit for a chevy sonic rs hatchback and have came across nothing. Any help would be great!
@jamest5149
@jamest5149 4 жыл бұрын
When fitting the flares, is it not beneficial to use the same wheels and tyres you intend to run to get the arch fitment to the tyre spot on? Or do you not have issues.
@mickeyandrade3435
@mickeyandrade3435 4 жыл бұрын
When you’ve done as many as we have it really makes no difference.
@davidrivas1174
@davidrivas1174 2 жыл бұрын
Great work. Where is your shop located and how much does something like that cost to get done?
@ruchitpatel4256
@ruchitpatel4256 3 жыл бұрын
Hey do we need to cut the car body before installing the wide body kiy
@DriversSide
@DriversSide 4 жыл бұрын
This kit is sooo sick! Makes me want to a widebody S15 on my channel🤔 also we need Cappuccino videos!
@Addiesarkisian
@Addiesarkisian 4 жыл бұрын
No weld thru primer under neith the metal?
@mickeyandrade3435
@mickeyandrade3435 4 жыл бұрын
Yes. PBE weld through was used.
@filipshapik74
@filipshapik74 4 жыл бұрын
Geez, they went all out on this thing!
@bully5991
@bully5991 4 жыл бұрын
Both throtl and goonzquad use the same Lincoln electric welder, good enough for them is good enough for me
@lewischafer3333
@lewischafer3333 4 жыл бұрын
I Really in enjoyed Watching the Amazing Building and Heavily Modifying a 2007 BMW E92 335i Good Content
@luissanchez-yd5te
@luissanchez-yd5te 7 ай бұрын
You do great work..I have a 325xi bmw wagon 2006 if u want you can take it n use it for content n I can wait until you decide it..plus I haven't see a wagon kit yet it will be nice..I don't mind waiting. .
@NieShop
@NieShop 2 жыл бұрын
Where can I order wide body fender that looks like those?
@anthonyciccariello8089
@anthonyciccariello8089 4 жыл бұрын
What about the front of the rear quarter panel over fender? Where the side skirt is at
@mickeyandrade3435
@mickeyandrade3435 4 жыл бұрын
It’s not on yet
@Trusty335is
@Trusty335is 4 жыл бұрын
What rear spoiler is that? Do we have to drill it on?
@BIMMERHEAD
@BIMMERHEAD 3 жыл бұрын
I just love this bmw e92 😍
@ranger51262
@ranger51262 3 жыл бұрын
can you install a wide body kit on a Buick Lesabre?
@ludofjord361
@ludofjord361 3 жыл бұрын
Hey what is the white Nissan in the backround
@grahamalldred7769
@grahamalldred7769 2 ай бұрын
I've watched this video about 6 times already 😂
@liveoutdoors8337
@liveoutdoors8337 4 жыл бұрын
Just one question, why didn’t he use aluminum for the inner fender wells so it doesn’t rust and is a lot easier to bend?
@smgs921
@smgs921 4 жыл бұрын
Cant weld aluminum to steel
@liveoutdoors8337
@liveoutdoors8337 4 жыл бұрын
smgs921 I know there are other ways like strong glues and adhesives
@smgs921
@smgs921 4 жыл бұрын
Live Outdoors steel is also cheaper and doesnt dent as easily
@liveoutdoors8337
@liveoutdoors8337 4 жыл бұрын
smgs921 they can afford 4 pieces of aluminum lol but it’s not a rally car it shouldn’t dent anyway and if it does it’s not really visible. Most importantly aluminum does not rust
@mickeyandrade3435
@mickeyandrade3435 4 жыл бұрын
Live Outdoors - We used steel for the same reason BMW does. It adds the structure back to the quarter. All of the steel is coated therefore it won’t rust.
@flyingfish92
@flyingfish92 Жыл бұрын
How much would it be to install a like this. Just labor
@jacksonpolicani2491
@jacksonpolicani2491 4 жыл бұрын
You guys should put HARD Motorsport wing uprights and an apr air foil on it
@42carmanmatt73
@42carmanmatt73 4 жыл бұрын
Mickispec or no spec
@kelevbro9999
@kelevbro9999 Жыл бұрын
What size clecos did you use
@duckwrth2472
@duckwrth2472 3 жыл бұрын
What wheels are those in the thumbnail??
@1ph0ne
@1ph0ne 3 жыл бұрын
Hi Dose the Wide body kit do something? Btw love your. Channel
@enzoerrera5094
@enzoerrera5094 4 жыл бұрын
When you saw the first video in your notifications but decided to watch it later only to realize they re uploaded it and now you miss out on being relatable
@julianhernandez9351
@julianhernandez9351 3 жыл бұрын
Why do u need to extend the wheelwell?
@gdjobufckngfruitcake
@gdjobufckngfruitcake 2 жыл бұрын
Fiber layup looked really good, and the body kit looks awesome on this car! Super aggressive I love the look (unfortunately the street fighter kit is too rich for me 😂😭) nice vid boys 🤘
@saravanarajoo562
@saravanarajoo562 4 жыл бұрын
Hey Mickey, what material do you guys use for the new wheel well?
@shehatesdrippyy2486
@shehatesdrippyy2486 4 жыл бұрын
any good places to get my wife body kit installed Cali
@elijahclayton2754
@elijahclayton2754 3 жыл бұрын
Would this fit on a 2009 bmw 328i coupe
@michaelaguiar1436
@michaelaguiar1436 3 жыл бұрын
How much does the labor for this whole thing cost ?
@user-poyotak
@user-poyotak 4 жыл бұрын
I like your team.
@ericparra3626
@ericparra3626 4 жыл бұрын
Don’t know much about body kits but when you have to modify the kit to fit the car does that mean it isn’t good?
@mickeyandrade3435
@mickeyandrade3435 4 жыл бұрын
No, that means you are using bumpers the kit wasn’t designed for and have the ingenuity to make it work. Pretty common in the custom car game.
@Manuel-xi4ju
@Manuel-xi4ju 3 жыл бұрын
how long did this took u? it looks great man.
@alexvargase4629
@alexvargase4629 4 жыл бұрын
The e92 now look more nice
@AlexAlioglu
@AlexAlioglu 4 жыл бұрын
you can reroute the reserve to the left side of the engine bay
@ttindingttinding8763
@ttindingttinding8763 2 жыл бұрын
Where r you guys located?
@mels_life1
@mels_life1 4 жыл бұрын
Not everything looks good or has to be wide body but ok... respect.
@e36fanatics
@e36fanatics 3 жыл бұрын
why judge others? people build cars for themselves not someone else...
@datboi1290
@datboi1290 6 ай бұрын
Bro is a top tier hater lmao
@mels_life1
@mels_life1 6 ай бұрын
@@e36fanatics if someone builds a car for themselves and records every detail of it to post on the internet on a channel with hundreds of thousands of followers, it’s definitely not for himself; and also, he posted it to the internet, for everyone and anyone to see, and give their opinions on.
@mels_life1
@mels_life1 6 ай бұрын
@@datboi1290 nah, just some cars are perfect the way they come, and others need body kits to become perfect. To each their own though
@SocialOrbit
@SocialOrbit 6 ай бұрын
@@mels_life1bro replied 3 years later
Rookie Mistakes When Installing A Widebody
9:07
Fitment Industries
Рет қаралды 249 М.
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
BUILDING a SALVAGE BMW E92 335i in 13 minutes
15:02
Performance Rebuilds
Рет қаралды 1,6 МЛН
How To Mold Widebody Fenders To Your Car!
14:39
Chris Borges
Рет қаралды 146 М.
Building a BMW 335i in 12 minutes! [COMPLETE TRANSFORMATION]
13:55
Turbo Your Car - Choosing a Turbo
22:07
Donut
Рет қаралды 3,5 МЛН
Building a DIY Wide Body Kit for my Mid Engine 67 Ford Mustang Fastback
27:09
"For $35,000 I'd Expect it to be Perfect"
42:13
Blacktail Studio
Рет қаралды 783 М.
Are Aftermarket Intakes Even Worth It?
10:17
Donut
Рет қаралды 8 МЛН
What Exactly is Race Tuning?
13:16
Donut
Рет қаралды 2,1 МЛН
How To Super Clean the Interior of your Car (Carpets & Headliner)
27:23