Tie Rod Kit for Polaris RZR Pro R and Turbo R // INSTALL

Mitch gives us a walkthrough on how to install our new Polaris RZR Pro R Tie Rod Kit.
Thank you for watching our video! Shock Therapy is a world-class suspension tuning and component company based in Phoenix, Arizona. We make original products right here in the USA and ship worldwide to all customers. Whether you are a casual owner or a racing enthusiast, Shock Therapy makes sure to place you FIRST. Purchase our Limit Straps, Dual-Rate Spring Kits, Sway Bars, Tie Rods, Ride-Improvement Systems and more at www.shockthera...
For more information on Shock Therapy, keep up with us on our other Social Media:
FACEBOOK | / shocktherapyllc
INSTAGRAM | / shocktherapyusa
Subscribe to our KZbin channel: / shocktherapyllc

[@RedSound2011]

Installing new shocks on tha choppa next video? 😄

[@brandonfloyd4328]

Just ordered this kit on black friday. Doing the install now and the drill bit that was sent with the kit is 3/4 not 7/8 like the video says. Measured the pin and its definitely a 7/8. ???

[@ShockTherapyllc]

Sounds like the kit you got had a drill bit in it from our TLS kit my mistake. We can next day you the correct one on Monday unless you have a 7/8 bit already somewhere in the tool box? Reach out to [e-mail] and we will get you the correct one.

[@Joblessparadise]

What measurement are you torquing your lug nuts to?

[@ShockTherapyllc]

100 ftlbs

[@madweazl]

@@ShockTherapyllc manual states 148lb'; any info on why you're suggesting 100?

[@blayzewebster8574]

Are these specifically for the ultimate? Or are they for the premium and sport also?

[@ShockTherapyllc]

All trim levels use the same tie rods

[@DionbrosYT]

Why the different shims? What do they do or when are they needed? Running stock tires but big 33” skats in the sand. On a Pro r 4

[@ShockTherapyllc]

Shims allow you to “tune” the bump steer or toe change out of the system giving you less feedback. The instal instructions show you how to measure for it and what shims to use to cure it.

[@DionbrosYT]

@@ShockTherapyllc do you have a link for the instructions?

[@ShockTherapyllc]

@@DionbrosYTI don’t at the moment but just type in the search bar for our channel pro R tie rod. Should come up

[@TwistedOff]

👍

[@johndeerefarmer4483]

Thanks for the video! A few questions: Since your tie rods are so much stronger, are they now stronger than the rack? In other words will I break my rack instead of a tie rod? (like putting in a stronger axle and breaking the diff instead of an axle) Second what was the bump steer on the car in the video before and afterwards? You didn't show how to measure that. Thanks. Keep the products and videos coming

[@ShockTherapyllc]

You are correct that a stronger part just sends the forces down the line. But, we break stock tie rods quite a bit. They are too small of a fuse for sure. Since I have run our tie rods I have 2,500 race miles in Baja on them with 35 s. Not rack or other issues yet. The car in the video had 1” of bump which we got down to 1/8”. We have seen many others between 1/4” and 4”. So it just depends. We have a bump steer video on line for our BSD kit. Take a look at that fir adjustments. Take it easy 🤘🏻

[@johndeerefarmer4483]

@@ShockTherapyllc Thanks for the reply!