EASY: Turn Off Check Engine Light for FREE

Please SUBSCRIBE and hit that THUMBS UP button. It really helps grow our community.
Use these Amazon Affiliate links* to order the supplies seen in this video!
Best Selling OBD Reader - amzn.to/3bcvo9V
Higher End OBD Reader - amzn.to/3bauZoF
Cheaper OBD Reader - amzn.to/3hhfP4u
*My description includes referral codes/links that allow me to earn points or credit that can be redeemed for products and/or subscriptions. When you use my referral code/link, you are helping to support me and my recommendations! Thank you for your support!*Its always frustrating with your check engine light turns on in a vehicle. Fortunately, many times the solution is easy to diagnose and fix. This video discusses some of the most common reasons check engine lights come on.

[@mrtwista5794]

So glad there are people out there that do things, not just for financial gain but just because it's the honourable thing to do!

[@TightWadDIY]

Truth be told, I love teaching and fixing things but I do actually make money for posting on KZbin.

[@AdanPerez-yx4eg]

@@TightWadDIY my chuc

[@DavenHiskey]

😱​@@TightWadDIY

[@agnessmith9313]

OMG. My check engine light was on for a couple days. I went out and turned the ignition to 'on' three times and it went OFF! You saved me a trip to the dealership...and lots of $$. Thank you!

[@TightWadDIY]

I’m glad it reset. If it comes back on, make sure you have your codes pulled for free at an auto parts store.

[@justtester_9962]

Cleaning the gas cap didn't clear those lights, but removing the negative battery and leaving off for 5mn worked for me and I didn't lose my radio settings.

[@TightWadDIY]

That’s great!

[@girlygirl1890]

My check engine light came on. I went and got an Oil Change and the Engine light went right off immediately. Havent come on since. Thank you for this video, at least it told us to check other options before spending a whole lot of money. Thanks so much. Gereat video.

[@TightWadDIY]

My pleasure!

[@josephinesmith7876]

Good

[@m.francis2774]

Turned key to ON position 3 times and light disappeared on 2004 Camry!! Woohoo!! Thank you so much!!

[@TightWadDIY]

That’s great! Hopefully your issue is fixed too. If the light comes back on, go have your codes run for free at an auto parts store.

[@sethkyere7602]

I solved a check light problem simply by closing the gas cap. I love this video.

[@TightWadDIY]

Nice! I’m glad it worked!

[@nanapoku5259]

Is one week okay to take the car for emission test after taking off the check engine light? Also, do I necessarily have to take it to auto zone to reset the code after a week before taking it for emission?

[@NoCanDojack]

Dude, it really worked. The TCS light disappeared when I switch my ignition to on position 3 times. My check engine light went away as well when I removed the negative post & let it sit about 5 mins. I thought it was going to cost me a lot if it wasn't for your video. Thanks men!!😊

[@TightWadDIY]

If it comes back on, make sure you have your codes run.

[@MarysolPantoja-iv7ue]

Great video thanks worked for a 2000 Honda LX V tec engine

[@coreyjones8912]

It work 3x to acc on my 2016 chrysler

[@iandawson9945]

​@@TightWadDIY.q3⁴⁴¾q4q4⁴😊😊

[@cdang6663]

@ TightWadDIY I am 87 years old, and the temp out there is 87 but feels like 97 ! Have driven my 16 years old Camry for 3 wks now with the check engine light on, and a New gas cap. I first tried the 3 time...On, off.... Didn't work. Then, next, battery neg. off. Works like a charm !!! What can I say ? Thanks a million TightWadDIY.👍🙏

[@themac9344]

I'm so glad you informed others including myself on not going straight to emissions to get a test because I just went and got my Gas pump assembly replaced and my engine light was still on so I came home and tuned in to your channel blog and took off the ground wire for 5 min and worked successfully now I will wait and drive for 2 weeks before going to emissions

[@jman2005]

Thanks for the upload. Disconnected the negative battery terminal for three minutes and it worked. Replaced the EVAP purge valve on my 2019 Ram Bighorn for the codes it gave, but the check engine was still on after the repair. Your tips cleared it up. Thanks. 👍

[@TightWadDIY]

I’m glad it worked for you too.

[@onalennalemo8571]

Thank you so much 😊 a dealer was telling I need to replace some engine part and mentioned a very expensive amount. Maybe because I am a woman so I thought of listening to your videos now I will ask intelligently

[@TightWadDIY]

Yes! Go to the auto parts place and have them pull your codes for free. Take the codes and Google them to find out what they mean.

[@adriannraden7366]

It is so good too have people like you guy's out there,thanks so much

[@TightWadDIY]

My pleasure.

[@arnoldbelaj6988]

Thank you thank you thank you may you have a fabulous year. The best wish i can think of. You ve saved me a lot of money and time and stress with a simple video. This is how internet should be used. Bravo 😊

[@thomasfriis3556]

Thx dude. This was really helpful and solved the problem. Well filmed and precise advice 👍🏼

[@TightWadDIY]

Great! I’m glad it worked for you too!

[@GlennDavidBeatty]

Smart, simple, easy to understand, especially for novices.

[@TightWadDIY]

I’m glad you found it helpful.

[@apuzyr]

Glad to hear you warned about NOT going to Motor Vehicle inspection right after resetting the check engine light. Their computer system will know it and fail you. Saying this from experience.

[@TightWadDIY]

PowerPunchingSecrets.com That’s right! You can’t blatantly cheat the system.

[@blesstone2562]

Is that right! Thank you 😇

[@Hummer999xx]

I went to get the emissions done right after I reset the code. I drove the car for 5 minutes. No issues with passing. I have a 1998 Honda Accord. Been doing this for the while.

[@MelodyFaithClark]

Can you still get get passed on the inspection if you have a check engine light on?

[@MelodyFaithClark]

@@TightWadDIY I have a Toyota Prius I think my problem is probably my gas cap but I'm wondering if you go get your car smogged will it pass if it has check engine or not?

[@fongfutube]

Satisfied follower of your channel. Followed instructions and the first 3 clicks to ignition solved the check engine problem on my 2016 GMC Terrain. Thank you!

[@TightWadDIY]

That’s great news! Glad to that works on the GMCs.

[@weriesblack1375]

Why does the 3 turns to on remove the check engine light and does it reset any electronics or just remove the light mine came on after a engine wash and now my cruise control wont set and i have the light on. Any help will be apreciates

[@williamrandolphjr6807]

these are great tips esp., on the gas caps maybe old & time to change them, however, if you have a pre- 1990-94 NO AUTO STORE will check this cause they don't have an OB1 READER,the OB2 is only for 1996-NEWER I have a 94 Oldsmobile Cutlass Supreme S 3.1lt & my check engine light comes on every so often, but none could find anything wrong

[@mercylewis5373]

check enjin light is not coming on car is dead wont start

[@mercylewis5373]

car dont want to start

[@carminesemioli8293]

i had a check engine light come on. got it checked at autozone just a thermostat issue. had 20.00 in rewards from autozone and paid 1.61 out of pocket. came to KZbin learned how to replace it. I was waiting for the check engine light to turn off. Then decided to look up how to manually turn off a check engine lightCame across your video and the battery terminal wire wire worked flawlessly. thank you

[@TightWadDIY]

That’s great! Hopefully you are all good to go now.

[@angelaprince7698]

It is great to have people like you. My check engine light is on a reading says the transmission is malfunctioning.

[@TightWadDIY]

I’d go get that checked out. Turning off the light isn’t solving the issue.

[@proscentgifts]

What was it to fix? I have too with solid light.

[@jesusonlywaytoheaven1463]

I want to thank you guy for this video . My car was with engine light on since yesterday . I went to work today worry, then I saw this video . I did the same as you did, unplug the battery about 5 min. When I turn on my car , the engine light was gone. Thanks again !

[@TightWadDIY]

Turning off the light doesn’t solve the problem though….

[@RN-jq9mb]

It will appear again after few minutes

[@JosephMbidi]

​@TightWadDIY ahahahahahahahaa. Turn off engine light is temporarily. It will be back and you guys need to find the mechanic to fix this problem 😂😂😂😂😂

[@chefarm9798]

Omg! It was my gas cap🙄 .. I was so close to taking it in.. God knows what they would have told me it was.. Wow, thank you!!

[@TightWadDIY]

I’m glad you checked here first!

[@justtester_9962]

You can go to Advance Auto Parts and they will let you use their diagnostic tool for free instead of paying $100 or more at the dealer.

[@TightWadDIY]

@@justtester_9962 That was mentioned in the video.

[@NgocNguyen-lx2jf]

Thanks for the videos lots easier than others posting.

[@TightWadDIY]

Great! I’m glad it worked for you too!

[@randymcmanus8691]

If there's an issue the light will come back on after resetting usually within 20 miles or so and it will keep coming on until issue is resolved

[@RN-jq9mb]

You are correct

[@kalaKHAN-ig8kn]

Thanks Mr. i am from Norway and i just paid 100 us Dollar two days before for just this job .

[@TightWadDIY]

Sorry that happened.

[@dougiemac8417]

Thank you for the quick fix information. I'm experiencing the same issue. My check engine light and my traction control lights are on solid not flashing. I'm going to try this in the morning. Pray for me. 🙏🏾

[@snetiengineeringltd8246]

Feedback

[@camdix3250]

Thank you so much for this. You're an excellent teacher. Concise and to the point. Excellent! Best wishes.

[@TightWadDIY]

Thanks! I’m actually a school teacher. 😂

[@camdix3250]

@@TightWadDIY I'm a retired school teacher as well! Your teaching is brilliant. I know squat about cars, so it's thanks to folks like yourself that help those like me. Warmest regards.

[@gloriatorres2198]

​@@TightWadDIYh😂😅😊😊😊😊😊😊😊😊😊😊😊¹¹😊1

[@alexanderlopez3033]

Well did everything you said not to do on my ‘04 tundra and didnt have a problem lol. In a strict state as well

[@romniesomogyi5103]

Thanks much for the info! Will try. ... These things!

[@Jesus.Love.Saves7]

That was a excellent video cause. I have that problem with the engine light. Thank you I probably need to get rid of this car

[@mariejean2628]

Thanks for showing this video I have my check engine light & the VTM-4 on what does I mean?

[@ritanelson4651]

I did what needed to be done to fix it and your second option work. Thank you so much, sunscriber👍🏼😊

[@TightWadDIY]

That’s great!

[@Jim-bx7vs]

I had this light come took it to O'Reillys in glenwood IL. They scanned it turned out to be the thermostat i replaced it disconnected battery cable ,all is well thanks for sharing

[@TightWadDIY]

That’s great!

[@chandlerwilliford8448]

Thank you so much I have this exact issue with my Tundra. This resolved it. Thumbs up and subscribed thanks again

[@TightWadDIY]

That’s great!

[@GHOST5663]

The ignition trick worked for me, Thank you.

[@TightWadDIY]

Great!

[@chrissyrodriguez1166]

Thank you so much for your help. And explaining so well and in detail you're Awesome!!! 👍👍😊

[@TightWadDIY]

Glad it was helpful!

[@Mibonitodesinaloa]

Oh my god!!! THANK YOU SO MUCH. YOU LITERALLY SAVED ME FROM SO MUCH !!! I was soooo worried, I turned the key twice and engine light went off. 🙏 Im sure I would have gotten ripped off. Thank you so much. GOD BLESS YOUUUUUU!!!!

[@TightWadDIY]

You’re welcome. Now if the light comes back on, go to an auto parts store and have them pull the codes. Somewhere like Auto Zone or Advanced Auto will do it for free.

[@Mibonitodesinaloa]

@@TightWadDIY love you!

[@justtester_9962]

Now they let you do it yourself with simple to follow instructions on the code scanner, and then you get a free printout inside if you want.

[@pvsheridan]

Thank you TW. I updated a BUNCH of stuff (TPS, etc.) on my drop-dead mint 2007 MGM (24k miles), and light appeared. 'Did the routine you shared, and no more light. Thanks so much.

[@TightWadDIY]

Great!

[@rosemitchell921]

This was very helpful 👌 Thanks for sharing

[@TightWadDIY]

My pleasure!

[@pahbsd]

I did turn the key 3 times and it worked! Thank you

[@TightWadDIY]

That’s great to hear! If the light comes back on, go get them to pull your codes for free at an auto parts store.

[@lavaeseai892]

Thank you for sharing. God blessings.

[@randomvideoconnoisseur563]

Unfortunately in Canada, most places charge $140-190 just to plug their diagnostics tool in. Right now I need an 02 sensor replaced and I already know the issue from plugging in my friend’s obd code reader. I went to multiple repair shops and they all say they have to charge me first to plug in their own device even though I know what the problem is. The total cost to change 1 o2 sensor will be above $700

[@TightWadDIY]

Sounds about right. Their “diagnostics fee” is their biggest money maker because they get $100+ for a 5 min diagnostic. You are really paying for their knowledge but it’s a bit much. Find a place they doesn’t charge the fee as long as you let them do the repair and you will know you have a good shop.

[@chrisd77]

Thank you for this, it was really helpful. Greatly appreciated.

[@TightWadDIY]

My pleasure!

[@mohayooahmedova7281]

What a amazing idea thanks a lot I hope learning further about 👍🏻

[@TightWadDIY]

My pleasure 😊

[@nadimchadi9617]

I had same issue with my car and I’m gonna try these steps tomorrow morning if it’s worked i will share your videos to all my friends

[@TightWadDIY]

Please do

[@alansanders5553]

Thanks for your help that worked

[@kimberlysmith1082]

I just did the battery trick...it worked. Yippee thanks buddy

[@TightWadDIY]

Great!

[@mariesilver9162]

Thank you so so much, the key trick worked!!! You saved me a trip to the repair shop!

[@TightWadDIY]

Just to clarify: turning off the light doesn’t fix the problem. If you didn’t change anything it will likely come back on and you will need to go have your codes pulled.

[@mariesilver9162]

@@TightWadDIY It's been a couple weeks since I turned it off and it hasn't come back, so fingers crossed. I may not have had the gas cap tightened enough.

[@TightWadDIY]

@@mariesilver9162 That’s great!

[@stevealexander748]

Thank you brother, that was insightful.

[@TightWadDIY]

My pleasure!

[@FrancisBaker-zt7wc]

I appreciate you kindness by sharing these tips....thank you

[@TightWadDIY]

You are so welcome!

[@Nana-jn7uu]

KZbin has a solution for everything.. thanks for the video

[@TightWadDIY]

My pleasure!

[@jwatt9570]

My hummer h3 had check engine and tpm lights on. Disconnected the negative battery cable. Re connected and "bingo" all clear thank you.

[@aderloustonluc6511]

I haven’t try it yet, but thank you for the information 🤝

[@TightWadDIY]

You’re welcome!

[@NewYorkF150stx]

Thank you much... Bro! Absolutely worked. Thank you so much for sharing this video. Hyundai Santa Fe Sport 2013 👋👍🤙

[@TightWadDIY]

Glad it helped

[@blesstone2562]

I failed inspection of 0432 and my car runs good.! Thank you I'm going to try this today!

[@hepeli2]

If I will get the motor warninglight blinking and also a accimalator light as well is the accumalator or charcher off on duty? My car is Kia Ceed 1,6 ,2011

[@siriqballectures2644]

Thank you you explain the problem very easily again thank you very hank you very much and

[@TightWadDIY]

Happy to help

[@habibshaikh389]

Very nicely explained sir

[@TightWadDIY]

I appreciate the kind comment.

[@marlenespotts2282]

Thanks for sharing the information .

[@TightWadDIY]

You bet

[@essslei1035]

👍🏾 great video shared Very helpful thank you for sharing 🌟🌟🌟🌟🌟

[@TightWadDIY]

Thanks. I’m glad you found it helpful.

[@Julian-Willemsen]

Youre the man! It worked! Many thanks bro

[@TightWadDIY]

You're welcome!

[@susangbadamosi6303]

Thanks for the information

[@TightWadDIY]

You’re welcome!

[@aljy4078]

thanks for your good information

[@TightWadDIY]

My pleasure.

[@lonnellware3055]

My toyota 1995 toyota engine light showed! I removed the cable and waited for a few minutes and the engine light turned off! Thank you very much!!!!!!!

[@williamarandolphjr4649]

If you have an older model like my 1994 Oldsmobile cutlass supreme s 3.1 Lt.that means that you have an OB1 port and auto parts stores don't have an OB1 scanner,there for they can't scan it

[@leonardkoczor8380]

Use a paperclip then count how many times it comes on then go online to find codes

[@cruella5016]

I'm going to try this after work today! If it works I will be sooooo happy. I have a feeling it won't because I usually don't have things that easy lol. Thanks for the video.😊

[@TightWadDIY]

Just turning it off won’t fix your issue. This is mean to turn it off after a DIY repair is done.

[@blesstone2562]

THANK YOU SO MUCH 😊

[@tntathean4409]

This really work even for the MZR 2.3 l madza 3 wow 😮❤❤❤❤❤ cheers bro

[@TightWadDIY]

That’s great!

[@ssratiq]

you save my day brother...Thank you

[@TightWadDIY]

Great!

[@kusuko..scla..213]

I just did it with the key..and is gone THANK YOU SOOOOOO MUCH!! I was SOOO worry Abt cuz right now I'm 450 miles from home.. TTHANK YOU YOU THE GREATS !!!

[@TightWadDIY]

That doesn’t mean the issue is fixed. I just means you turned off the warning. If it comes back on, you still need to have your codes pulled.

[@brighteyes6559]

@@TightWadDIY Does the computer ever throw codes by mistake? I got a code P0793, but the car runs fine and smooth. Didn't experience any problems with driving. I will try to erase the code, and hopefully the computer just made a mistake and the code won't come back.

[@TightWadDIY]

@@brighteyes6559 Not really a mistake but a temporary issue caused by bad fuel or. Loose fuel cap can cause it.

[@QuocTran-kz3ve]

thank you for your video

[@Abdou-je5uu]

Thx a lot for been here for people

[@TightWadDIY]

It’s my pleasure.

[@lyxaduong5530]

Scorry Kilmer has highly recommended people do not short circuit the negative terminal directly to the positive one, but use any big 1 Amp resistor of 1K to make the short circuit trick.

[@at8630]

I see your vsc and vtrac lights were on too. I have that issue with the check engine light also. How did you fix those? That was more than just disconnecting the battery, wasn't it?

[@khaing6445]

Thank you brother. I appreciate you to much.

[@TightWadDIY]

You are welcome. I appreciate the kind comment.

[@arefaramarz5518]

Absolutely good job

[@TightWadDIY]

Thank you!

[@williamyoung369]

Clean the gasket inside the gas cap & all around where it seats. Check the gasket for cracks. A paper towel & some WD40 works. Freezing weather may shrink the gasket. Maybe time for a new gas cap.

[@TightWadDIY]

All great tips.

[@UltimateForceMarketing]

Better NOT use WD40 on most ANY rubber, it simply dries out the lubracating or natural oil compounds out of the rubber making it become brittle over some time. Best purchase some 303 lubricant spray it helps restore the natural compounds in Rubber therefore making the rubber components last a long time!!

[@biggdawgg6895]

Damn bro thanks for this video I appreciate you 🙏

[@TightWadDIY]

You’re welcome!

[@davidofarrell2871]

Thank you for your 3 time tip..

[@TightWadDIY]

My pleasure.

[@olivera-nutakor9063]

Was so helpful.

[@TightWadDIY]

Great! I’m glad you like it.

[@Rick-or2kq]

For emission tests to pass after resetting the computer drive it at least 100 miles before taking it in.

[@nolanbonus6317]

approve thanks bro,take care

[@nomercy5422]

Very informational.

[@TightWadDIY]

I’m glad you found it helpful.

[@christopherzobel357]

Nice 🙏🏻 thanks!!

[@TightWadDIY]

You are welcome! I’m glad you found it helpful.

[@sunvaj6754]

Thanks for sharing.

[@TightWadDIY]

My pleasure.

[@sincengilemkhize1377]

Thank you very much for this helpful clip Does it mean the proces closes the slippery light as well Thank you

[@TightWadDIY]

It should.

[@jmezaor]

thanks for the info.

[@TightWadDIY]

My pleasure.

[@delroyferguson2457]

Very good,thank you

[@TightWadDIY]

My pleasure!

[@emanovwevoke1913]

so helpful. thanks.

[@TightWadDIY]

I’m glad you found it helpful.

[@veannegilchrist9925]

Thank you sooo much❣️

[@TightWadDIY]

You’re welcome 😊

[@collinssikpo4703]

Wow that's great let me try it on my engine

[@t.5610]

Thank you for the information question what causes the stability track light to turn on and service engine on although got vehicle serviced after repairs to heads and addition repairs the check engine light went on a week later and hasn't turned off know my vehicle starts but stays on for a few minutes and shuts off. Thank you. Veh is a 2015 Chevy Cruz.

[@TightWadDIY]

Sorry, it’s hard to say. You’ll need to plug-in and OBD reader to see.

[@edweb9751]

many thanks for your reply. Ed

[@TightWadDIY]

My pleasure.

[@TightWadDIY]

Just to clarify, it won’t fix your issue. It just clears the codes. If the code returns you should consider addressing the issue.

[@5ahussainshah]

That’s great. Thanks❤️

[@TightWadDIY]

You’re welcome 😊

[@lorischneck7737]

Right I thank you

[@TightWadDIY]

You’re welcome.

[@nnamuahemmanuel9329]

Beautiful expose'

[@TightWadDIY]

Thanks.

[@HN-jf5lh]

Thanks bro, it does work for me .

[@TightWadDIY]

That’s great!

[@olarewajuabayomi]

Thank you sir it works

[@TightWadDIY]

Welcome 👍

[@robertapat5331]

Good job sir

[@TightWadDIY]

Thank you!

[@sudheerkumar5966]

Very nice Sir

[@TightWadDIY]

My pleasure!