3 FREE WAYS TO RESET CHECK ENGINE LIGHT WITHOUT CAR OBD SCANNER

[@TampaTec]

#OBD2 TOOL-amzn.to/2lr9l5i *affiliate link Instagram-instagram.com/tampatec/ THE 3 FREE WAYS ARE 1. disconnecting battery terminal connection for 1 minute (free) 2. disconnect battery connection then hold horn or use headlights to discharge remaining energy in circuit (free) 3. disconnect both battery connections and wait 1 minute 4th way is best but not free, use OBD2 tool with toque app to reset or troubleshoot codes ($19)

[@rickgevara9598]

Tampatec ob2 for 2008vw

[@ianritchie126]

Tampatec and m

[@kenrithjackson7605]

Ok thanks

[@camcoder7247]

Android only

[@ChocheToledo]

Tampatec doesn’t work with iPhone (iOS)

[@719CoSprings]

After hundreds put into part replacements I Just want to say I used the 2nd method And it cleared my check enengine light on my 03 navigator , I drove from Denver to Salt lake city and no check engine light came on I was able to use this truck as a trade in. So thanks for the tip.

[@kuyamanoy2176]

i am automechanic from philippines,i learn add to my knowlege at 3 ways step check engine,thank you so much,,watching philippines,

[@monanegrete8062]

After watching other videos on the same topic, your video is the best. You get right to the point explaining everything in detail. In addition, your voice is clear and don’t speak too fast. Again thanks for sharing young man....

[@celiamichel1629]

Smh

[@jesustembras8246]

V🎉c😊

[@emmascoemmanuel-ee8us]

Please can I have your number

[@gregcalvert9208]

I tried your 3rd option and it worked!!! I have tried other ways before, that didn't work. THANKS FOR THE GOOD INFORMATION!!!!

[@sa4moreno]

Sir totally informative, the car dealers have a hold on you when they tell you they can not reset unless they 1. do a diagnostic and hit you with 150.00 and 2. fix the problem and hit you with parts and huge labor costs. If I can fix the problem myself I would rather and now I can reset engine light. And if I was paying attention correctly, if I didnt fix the problem the check engine light will come back on. Loved this video again thank you so much

[@trashy10]

if you did fix the issue,the light will go off by it's self.Try it unplug a sensor in your eng bay wait till your light comes on,then plug the sensor back in and drive the car normally it may take a day or two but you will see.

[@seansecker9398]

Yes well shops have to pay for a lot of software. It's not unreasonable that they want a way to recoup any costs

[@BLACKMONGOOSE13]

Thanks dude. I have 2014 F350 and 3 times the check engine has come on and the dealer found no issues but as long as the check engine light is on it disables my remote start which is a B in the winter. Now I can clear the stoopid codes.

[@THOMMGB]

Hi, You mentioned the gas cap could be loose, but, if you've got a gas cap issue and it's good and tight, check the gas cap O ring. On an older car you may find a slight crack in the O ring. This is enough to keep the gas cap from properly sealing which causes the Check Engine light to come on. This happened to my girlfriends car. The Toyota dealer didn't have an O ring in stock, so I bought a new gas cap and the problem was solved. Regards, Tom

[@nozyma4319]

i hope you still have this account but did it clear right away or did you have to go through the cars drive cycle

[@bernardmiler3106]

Thanks for the video, I tried 3 methods without the scanner with no success. I bought the Ozito scanner from the local harware store for $50 and it cleared the errors with no problem.

[@johannesmaala6422]

This worked for me. Thanks for the tip. My gas cap was the issue, I guess I didn’t tighten it enough after fuelling. The check engine light was still showing so I tried your tip and it worked well. 👊🏼

[@IRailroad]

1st method "WORKED" after 2 years and shops! Thank you very, very much!

[@mikevonkleist6767]

I'm a pro, dude but that was very well done. You didn't mislead anyone. Thanks for that.

[@trashy10]

you're a pro?REALLY?

[@scottfreeman5854]

A pro what ? Check engine code fixer ?

[@jgs2277]

Great video, my friend. I had a P0440 code pop up right after a fuel stop. I removed and tightened the fuel cap but the check engine light remained. I followed your steps and remove the negative cable from the battery, waited 30 seconds while I turned on the lights to discharge any remaining energy... And sure enough as soon as I reconnected the negative cable to the battery, the check engine light was cleared. Thank you. 💯

[@Derekryan456]

Ye but has the light come back on

[@thisguysnameismatt4460]

Ever since the invention of the heck engine light, we've done the disconnect battery reset. It worked almost every time on every vehicle, however, it doesn't fix sensors if they are bad, just resets the light...if the light is because of a bad sensor the light will come back on. Back in the old days you could get away with the reset if you needed an emissions test. (Light on fails immediately) but newer vehicles (and tests) can tell when scanned that your computer has been flashed (reset) its best just to get it scanned and fix the problem.

[@JPHET37]

Most common failures are loose connections or bad sensors in engine bay . Also checked wire harnesses for opens and corrosion. Last thing is your gas caps make sure it's tight

[@MusicMinisterJP7]

Some FYI.. Check engine light is designed to indicate a problem within the vehicles engine/tranny electrical systems. The way to erase the light by normal standards, is to check for the error code, fix or replace whatever electrical component is bad. Of course, and a general rule of thumb, is to disconnect the battery when ANY electrical repair is going to be done. By doing this, the check engine light goes out bcuz computer will sense the repair And, the code which would otherwise by All means stay on the computers memory will also be erased. Of course all codes are erased by this process, but good codes that the computer uses to monitor engines electrical system will return after some driving. Reason I take the time to post this info, is bcuz many believe that erasing the check-engine light will fool the inspector when the time for vehicles inspection is due. It is EASY to erase the check-Engine light, but the error code (if any) remains in memory and DMV's inspection computer will get it from the vehicles computer. If that happens, your vehicle will be FAILED. Free is a nice word... Proper, is a better one.

[@trashy10]

good advice,but more FYI the MIL is there only for emission related issues,nothing else

[@sentimentaloldme]

All these "easy" fixes do NOT fix the problem..The engine light will come on again after driving for an hour or two ..The only real fix is to bring it back to the garage that specializes in your make of car no matter what age it is

[@douglasalderman3026]

Put gallon of lacquer thinner in 1/2 tank of gas ,drove for 200 miles engine light went out.Saw this on KZbin. Cleaned catalytic converter and oxygen sensors. Worked for me!

[@TampaTec]

Never heard of that before, whenever works for you 🤷‍♂️

[@dtvlogs-deepatulman6094]

I did the first option.. N it's good now thanks. You saved me 150 $

[@theita231]

As someone who doesn’t know about cars, the device seems useful. Thank you.

[@akallio9000]

If you're doing this trying to pass a state inspection, know that while the check engine light doesn't illuminate any more, the "MONITOR NOT READY" (a test to see if the EGR or whatever actually works) will continue. You have to drive the car a significant distance to allow the system to actually check if everything is kosher. To speed the process of getting the monitor not ready codes to go away, google for "drive cycle" for your specific model of car to tell you what to do to activate the tests as soon as possible.

[@tonyt9380]

That is exactly what happened to me when I used the OBD2 land torque to reset an error code for a leaking gas cap. When I returned to have the vehicle re-inspected the inspector told me that the system was showing as not ready. I am still looking for resources on how to do the drive cycle thing to get rid of the not ready status. This is a 2013 Ford Explorer.

[@mills9320]

I'm still taking my car to the shop but this helped me to be able to drive my 2014 hyundai sonata hybrid limited again! It went into hybrid safety mode WHILE I was driving on the highway in the rain after work. I tried almost everything before I paid a crap ton and decided to use the scanner method. My car is apparently under the TXXM warranty so hopefully I won't have to pay anything out of pocket. Update- I got rid of the crap late October of 2022 for a Ford Mustang Ecoboost Convertible

[@dell-ve7ps]

You have no idea why it doesn't look like that is

[@mills9320]

@@dell-ve7ps huh?

[@rushfanjames2112]

My check engine always comes on, I checked the engine, it's still there.

[@TampaTec]

GSXR RIDER 😆 good one 👍

[@Article_170]

GSXR RIDER Check your blinker fluid that might be the problem then

[@johnortmann3098]

No, sounds like bad muffler bearings.

[@martystevens3969]

Get a code tester like a Actron CP9690. It has live, graphing, record, oil light reset, smog test readiness test, and MORE! It works from 1983-2013.

[@deelee3645]

g

[@richardpeggy9621]

Disconnecting the battery negative terminal and waiting for 60sec and pressing the horn and turning on the light's is excellent idea, I did it on my Chevy sonic? And it worked thank you

[@MrDejast]

I've been an automotive technician for over 40 years, and you never clear a check engine light. The monitors are all run, and clearing the light clears the monitors. Causing you to fail emissions until they all relearn. Could take several days or even weeks. The proper way to clear light is to find the cause of the issue and the light will go out on its own. Usually in 1 day of normal driving.

[@MultiWayland]

need to pass test 2005 Camry. disconnect battery or buy obd2 scanner ( auto zone ) to clear codes ( thank you) keep up the good work my brother

[@laurenkauffman6667]

Fantastic video!!! Saved me a trip to the rude dealership. Also ordered the reader!

[@archjen]

Thank you for your direct, to the point presentation and the fact that disconnecting the battery will delete all my saved radio station settings.

[@polarisgm]

"3 ways to fix without using scan tool"....uses scan tool to turn off engine light! 🙄

[@kem965]

Hahaha.

[@leel2skummy]

Thus guy is a joke

[@BIGZO242]

And the third but not least way is to use a scanner.

[@ibelieveyourlies1984]

🤔😎🤩🤣😮‍💨😬🤐🤤😒 You nailed it lmao. people are fools and liars

[@richardthompson6366]

How to turn off engine light without fixing anything.

[@anilramnauth4531]

I like the first method. It is very easy and it works...

[@royharding2437]

Fantastic advice, cleared my check engine light no problem, thank you for your help.

[@Anxietywilnotwin]

Awesome! How long before it comes back on??

[@Godis3inOne]

Yes! Thank you Lord for leading me to this video. Prayed and then I did step ONE and it worked. Have a old car that the hood doesn't stay up, so had to hold it up with my head while I disconnected the cable. LOL

[@dannyspitzer1267]

The "lord" and praying had nothing to do with it...

[@unreconstructed]

@@dannyspitzer1267 shut the hell up man. Let people live their lives.

[@laurabledsoe5878]

Are you in for a BIG surprise!

[@paulf1071]

Thanks for the tips, but best not to clear the DTC codes while the engine is running. Engine should be stopped, but ignition key in On position to allow the OBD comms. Will take a few days (or drive cycles) for the LT fuel trim to stabilize, and readiness monitors to run.

[@maxiefairbanks8399]

Thank you so much for this! I can't wait to try these methods on my car. I have one faulty sensor that is making my whole dashboard be lit up like a Christmas tree 😂

[@druwillikers]

hey bro and your video was the most detailed was the best all I seen today I've been looking at some stuff and you know some guys going to way too much detail I get five minutes of commentary before they even get to the product you got do it right away well done, do it

[@kimlam6117]

Tried the first step and it worked. Couldn't believe it. Thank you.

[@mrdeanv4414]

Grest video and very informative..... Do they make one of these readers for a C4 95 Corvette OBD1..?

[@thedd13ram]

the best free way is to remove the EFI fuse in the fuse box for a few seconds. this resets the car's computer without resetting the clock, radio etc. I have done this numerous times and it clears the check engine light on my OBD1 1989 Toyota Pickup

[@jamesanastasia3237]

Shane Waldo I have a 04 Mercury Mariner.think it would clear the engine code?

[@thedd13ram]

James Anastasia it should

[@thedd13ram]

Well, it depends on if the cause of the check engine light was fixed (e.g. bad o2 sensor etc.). If the cause was fixed, it shouldn't come back on.

[@glenwweitzdoerfer5633]

Depends on the code,could come back instantly

[@Momtocam1997]

I do this as well. Although the light comes back on in a few days. Mine I refer to phantom light-2001 Dodge Intrepid ES. Time for yearly NC inspection. Hopefully this trick will work again. Car is maybe worth 375.00 so don't want to pit anymore money in it. Same code P0441 has been a thorn for years. Last year ended up buying a new factory gas cap. Car runs great.. just a pain once again.

[@claudefortin9044]

it work for my car , an echo 2005 83 000 km , I disconnect the - terminal for 5 min. thank U

[@kaiescherif4425]

Awesome and thanks for sharing! Disconnecting the negative terminal on my 2008 Honda CR-V solved the problem.

[@saalarabisa5420]

I just removed the positive red one for about a minute for mazda 3 2010 and the engine management light went off Thank you for the video it save me £20

[@TheSwords99]

Interesting, because they always say to remove the negative cable first.

[@xgcskiman]

Correct. Always remove the NEG first and install it last.

[@McGaming412]

removing negative terminal and pressing horn with lights WORKED!! THANK YOU SO MUCHHHHH

[@stevetrunk1564]

Thanks! Now I know where to but the OBD so I can fix the problem and shut off the light. I have taken it to the shop 3 times for various issues but the car always come back with the code still on. Its either time to fix it my self or find a different mechanic.

[@drugbedevictorahiaba2604]

Thank you so much. I have been paying someone to reset this thing almost every now and then. I will figure this out.

[@mw1st]

I have a 2000 Mazda pick up. Check engine light is constantly on for the last 15 years. Truck runs beautifully. Who cares it's lit. Place a sticker over it if bothers you.

[@chevyrunner9832]

always scan your car before doing any of those steps, due to many different reason for setting a “check engine light” you want to have that info, do a little research to make an inform decision if you need to take it into a mechanic because there is vital information that helps in diagnostics

[@AOG_ETH]

Good video people are saying that if you reset the CEL light the problem will still be there yes in most cases but if you ever owned a saab that had tons of GM electrical problems than the cel light would come on if you hit a speed bump to fast so sometimes a simple reset could save 100s of dollars if the light continues to illuminate than I would change out the part

[@trashy10]

the real problem is that you drive a saab

[@georgehembrow5398]

Disconnecting the battery only resets it for 500 km. If your check engine light is on it's on for a reason...it's usually a sensor in the emissions or fuel circuits...

[@MichelLinschoten]

George Hembrow that’s not why this video is here . It’s here if you replaced the problem and do not have a odb2 reader. I sincere hope you do not work on cars 😂

[@dwoolaver1549]

@@MichelLinschoten hes comment makes more sense than yours. If the light is on you have a problem still turning it off doesnt fix the problem the light will come back on shortly.

[@donaldkuteh3853]

Good Av been watching your program always. It well educative and I like it . How can you fix the problem of relay on an audio set . When power button push on ,and the relay return back pls help.

[@TampaTec]

I need more info, car audio?

[@billfromelma]

Great video as usual. So will this tell me what to fix on a " service air bag " indication?

[@TampaTec]

billfromelma it only gives a general idea not exactly the bad part.

[@billfromelma]

Ok thanks!

[@burthabard8316]

billfromelma most air bag light problems are dirt and crap in your sliding seat runners dust food etc it thinks the driving seat is not locked in place and will put on the air bag light this is common from mums with kids in cars I find its mostly kids wax crayons that wax up the runner's its not a cheap fix in the garages as most seats have to come out to clean them runners at 60 pounds a hours labour mums beware

[@ItsNotAllRainbows_and_Unicorns]

Disengaging the battery on a Hyundai Elantra worked. Thx for the tip.

[@henryrmarquez6331]

thank you, very clear to the point, the options were technically explained. thank you

[@robbyjones7631]

Get a Actron CP9690 code tester. It checks live, record, graphing, oxygen sensor test, transmission codes, emissions readiness test, it has code lookup to diagnose codes, and MORE! EBAY has it. It works from 1983-2013. It is updatable.

[@kb1kos]

Another preferred option: a lot of shops offer free OBD2 testing. My trusted shop has done this for me a few times. They know I only go there.

[@TampaTec]

mc3lizard good tip

[@conniespaulding4847]

Rev fc bince

[@ronaldshields2790]

waterpump

[@maqon2020]

Thanks for Sharing that info...Now I just wanna know that if any of your above methods will also work on the 2013 BMW 328i XDrive along with the ( Engine Light ON Sign) & Does it remains Cleared for the Longer time, Waiting for the reply, Thanks.

[@sliedogg]

If you unhook the battery on certain cars, you will have to take it to a shop for recoding, if your engine light is on, that means there is a problem

[@m19710310]

Exactly

[@seancailes5146]

This is also designed to track position, speed and revs can also be used against you like being hacked! Like maybe brake system shut down when in motion.

[@ericwallwork7322]

Dad’s favourite piece of music ❤️

[@lrh57psi]

I went straight to the second method, it worked for me.

[@HomeAutomationX]

Great video. I actually have an OBD2 and the paid version of the Torque App. Mainly for a previous car I had as someone mentioned you could see accurate gas readings. However I also used it to reset the check engine light a couple of times which I believe was because of the gas cap.

[@slantymasterx2]

HomeAutomationX hi

[@icemule]

Keep moving, she don't want any of ...whatever it is your selling, woman is waaaaaay out of your league.

[@haidarfatlawi5921]

HomeAutomationX Love yo

[@davidlockwood8412]

HomeAutomationX show me your clothing

[@lindaemter7448]

My life is in your hands! I will have someone who will check all of your possible problems. If by chance none work, where can I take my 2001 chrysler M to help me? Most places are terribly dishonest. PLEASE HELP. This is my only car. God Bless.

[@Nick-ko1tw]

In my 2008 honda accord, when i unplug the connection to clean the maf sensor, check engine light comes on and wont turn off even when i already connect them. So what i do is same with first step. Disconnect the battery. Wait 30 minutes. And after connect the battery again, done. Well, there's nothing wrong from the sensor in the first place, i just happened to get bored so why not to do some easy works.

[@PanameraTurboSEHybrid]

I got that nice P0430 code on my Lexus. I've been driving with it for about a year with the CEL bulb removed. I got tired of it, decided to put the bulb back in, and ordered a used low mileage Exhaust manifold/cat.

[@trashy10]

you're so cool,lexus bmw such nice cars to drive and look fancy and rich,even if the ac dont work and power windows dont roll down.soo coool

[@ne_hi]

We know this doesn’t fix the problem shut up some of us just wanna pass emissions 😒

[@p9673]

Ny_beauty literallyyyy

[@supreme704]

No emissions in NY girl. You in cali now or somethin?

[@lovelight...1940]

😅😅😅😅😅😅😅shut up!! 😅😅😅😅

[@iamshe_destiny996]

Period pooh 🗣

[@bradlybelle5676]

Some of us just want to sell the damn thing. 😁

[@nali19751975]

Brother I hope you see this message I just wanna say thank you so much for making this video it really helped me..thank you so much m8

[@TampaTec]

You're welcome

[@p_hat]

you were incorrect about the fault codes being a record. The codes are still active on the vehicles PCM, they just haven't reached enough drive cycles before clearing on their own so they still show up on your list even with the fix being deployed.

[@albertodeoliveira6575]

Yes!.... Reset a valve tronic problems on a BMW!.... I want to see that miracle coming thru!..

[@ILuvTrading]

Wow you're a mechanic too 👍🏻👍🏻

[@ElMastaJos]

I liked this because I believe you're being sarcastic.

[@Cultural_Supremacist]

Mechanic? LOL. No professional mechanic would make a video like this. Just another grifter...

[@pandoraish]

thanks! turning on the lights and waiting 60 seconds helped. another video recommended 10 seconds, which didn't work in my case.

[@Mr.Unacceptable]

Second comment because the first had a link in it. If you own any Chrysler vehicle since 1988 you can cycle the key. Cycle the key without going as far as the start 3 times. On-off on-off on-off then on then leave it on but not started. Wait for a few seconds. The flashing light is your fault codes. flash flash pause flash flash flash flash is code 24. Or Flash pause Flash Flash is code 12 which is battery was disconnected. All cars should have this. It will just keep cycling through your codes until you turn it off.

[@victorbewley7671]

Solder Joe

[@zbepushinp885]

How to fix a 2o7 BMW led head light

[@domingosdesouza7665]

Hi Thank u for your useful advice. I tried one of them Secondly i got the responsible car mechanic from responsible company. I got the engine sign off from dashboard. It worked for some days. Now the sign appears again. Any suggestion on it. Pls i will appreciate. Hoping for a quick suggestion

[@mollyyoung6590]

first one worked for me. disconnected the negative for two minutes

[@TampaTec]

If the light triggers again that means you have still a problem you have to take care of, but if it was just a loose gas cap then light should stay off.

[@davidkrikac5661]

I hope you’re still offering advice. I ran across your clear check engine light video but I don’t think it addressed the actual problem I’m having. I live on the the west coast and require emission checks. I disconnected the positive cable for over a minute and it cleared the light but when I went to get it emission checked, it had sensor not ready failures. The technician told me that the only way to clear those codes is to drive the car for 100 - 500 miles. Will this device clear those hidden codes or is there another way? I browsed through some of your other videos. Brilliant stuff.

[@xgcskiman]

Short answer, no. When your battery is disconnected/codes are cleared, all of your modules basically reset. Your car has to go through a "drive cycle" before all of the modules will "wake up". If these modules are still "asleep", or if you have any DTC's stored, you will normally fail an emissions test. Thus, if you make a repair that requires codes to be cleared, you should allow a few days of normal driving before going to get tested.

[@jhodgepodge]

2010 Kia Forte Koup Sx 2nd method reset the check engine light for me. Thank u Sir!

[@gilbertnavarez3247]

if u changed ur youtube profile pic without the headphones to one with a tool it would help to connect us with what the channel is about. Thank u. I am not trying to be rude or judgemental just my honest opinion because I like ur channel but had forgotten all about it. I always thought u were a DJ and rarely have time to look for music. Glad u posed up as a recommended video. it brought me back to ur channel. Thank for the awesome how to videos !!

[@prosperandbehealthy]

Or if you can't wait you can go to Harbor Freight and buy one. If you have a check engine code, it is recommended to fix the problem ASAP, for if you don't, it can lead to bigger problems. Most sensors in cars go bad and is an easy fix. You can pick up sensors at your local Auto Zone store. If you need to get your car inspected, when you clear codes,they will not give you an inspection sticker unless you drive a few hundred miles after you clear the codes. So make sure if you need to get your car inspected, do that well in advance otherwise you will not get an inspection sticker.

[@joejones6968]

Yah...but at $50. To $780 a piece for these plastic Fucken sensors, you run put of money fast...and most generally replacing these Fucken sensors doesn't " fix" the problem, only compounds it.

[@dkbk2]

how would they know the sensors are cleared?

[@trashy10]

so much wrong in this section i cant even begin

[@richardbulman8569]

I have reset mine many times just by pulling the positive connection on the battery. Resets, and I don't lose anything on the radio. No problems.

[@oldgeordiegeezer3086]

"3 FREE WAYS TO RESET CHECK ENGINE LIGHT WITHOUT CAR OBD SCANNER" So where are they giving away the bluetooth OBD scanners for free?

[@timothyfritsch8801]

dawgonnitt you just saved my butt thanks alot as this fiat punto is stuck up in italian prealps nobody or nothing anywhere near this car it makes it about 30 miles then shut,s off after 20 minutes it goes again butt not far always check engine lite

[@johnlaps4179]

did the first technique, it worked and took literally 1 minute

[@TampaTec]

John Laps cool

[@icemule]

Cowboys blow steer balls.

[@mosesadiify]

Man !! You save my life and my money ..... thank you bigggggggg

[@djm7494]

thank you!!! mine has been on for a year eeek! will have to see if I can get one of those in Australia (and where that plug is in my car???) or could you pop over and have a look for me?? 😍

[@TampaTec]

Danielle Wilson sure but plugin is just under your steering wheel.

[@djm7494]

Oh look at that just had to remove the cover of that thing I always wondered about and hey even found the steering wheel column adjustment too!! Well I noticed you can fix Chromecast also and mine is being a little bi**h so you don't get off that easy haha

[@icemule]

Well she is pretty hot and add that Aussie accent, and... well you get it.

[@kelleytm57]

Tampatec i think your check Danielle light is on

[@lawrencebaloyi8188]

Brother is good, how can I get that just to use it for my car

[@carlrobinson5746]

"check engine light WITHOUT car obd" so what the hell is the little scanner and torque app? it's a fault code reader!

[@icemule]

Yes, you can get the free version in the play store, but you need to buy a cheap 10 dollar Elm327 device to pair with the app and is done through bluetooth. It reads codes, provides live data (I use it to monitor my water temp) and clears the codes, fix problem before clearing the codes, hope this helped. I use this one and it's been working for 4 yrs. and I use it every day. Costs 7 bucks, was $13.00 when I bought it 4 yrs ago. Good luck. www.walmart.com/ip/Newest-ELM327-V2-1-OBD2-CAN-BUS-Bluetooth-or-WIFI-Car-Auto-Diagnostic-Interface-Scanner/350281753?wmlspartner=wlpa&selectedSellerId=12917&adid=22222222227092531678&wmlspartner=wmtlabs&wl0=&wl1=g&wl2=c&wl3=214144097917&wl4=pla-347703678217&wl5=9010454&wl6=&wl7=&wl8=&wl9=pla&wl10=117429984&wl11=online&wl12=350281753&wl13=&veh=sem

[@ranillorodriguez6807]

@@icemule hi there, the link doesnt work ( I know its from 3 years ago). Is it blue? I did a quick search on Elm327 on ebay . Just want to be sure. thanks!

[@hussma]

Thanks mate. It's worked for my car I wanted take my car for mechanics, you saved my money

[@vietnamvo3890]

Very good and helpful instructions. Thank you

[@66Supertrucker]

Cool beans. Subscribed. battery trick did'nt work after I replaced a sensor the garage told me to replace. I'll order the bluetooth thing.

[@Mr5083]

Hopefully your mechanical if not you'll be at the mercy of a repair shop , I always try to watch repairs being done , ask lots of questions , see the old parts and test drive the car before I pay with a credit card , Beware of Crooked Shops People

[@josephine42901]

You are right!! Crooks! I had a bad experience recently. This crooked mechanic put in a used piece of junk but charged me for a new part. Only was discovered after my car broke down driving from the shop!!

[@steveanderson461]

I too always stand and watch what their actually repairing and always ask for the replaced parts because if they really needed to be replaced they wont have any reason not to give them to you. I also like you pay with a credit card so if their is still an issue I can have the credit card hold and even charge back the bill until they actually fix it right. If their honest they wont mind you watching if they know you.

[@විස්තරේ-ම1ඝ]

Thank you brother ❤️you save my money it worked negative terminal remove method again thanks alot(suzuki spacia )

[@nazimahmedkhan9194]

Hello dear plz kindly tell me which OBD connector use for Suzuki baleno 2002

[@troypierce9517]

You are a pretty helpful guy. Thanks, Keep on Going !

[@samoonahmedkhan]

Bro, Thanks. Please can you suggest OBD2 for Iphone.

[@TheColossusofRhodes]

Short and to the point. Well done.

[@mecrubtecald1184]

I like ur scanner sir can I download and by Bluetooth obd

[@robertmoore4386]

First class. Something informative and straightforward. Cheers.

[@jasonburrows5417]

Bro I wish I could slide my 2008 Explorer and let you take a peek. Complete armature learning everything by you

[@rosemaryrobartes1743]

I use telekinesis . Works every time !

[@wilco1v]

Almost all modern cars (2004+) need a eobd/obd2 tester too reset engine/automatic gearbox dtc , code,s above p1000 are factory specific and need better professional tools to diagnostic and clear them finally.and than i don,t talk about all other pro tools for modern car-systems onboard now a days. nice tool to have and play with ,ill have ++++ of them around and others 5 of 7 day,s weekly

[@kennighee4624]

That was real clear & very helpful. Thank you

[@mareeric5583]

Oooh My... It worked on My Toyota Vitz.. 💪You're cool Bro.