Tillotson 212e gets a billet flywheel and more top speed?

Tillotson 212e gets a billet flywheel and more top speed?
Installed a Slipstream Billet flywheel in the Tillotson 212 on the Doodlebug/ Baja Racer minibike .
Did a top speed run to see if the flywheel installation made any difference in performance?
Doodlebug minibike Playlist - • Baja Racer/ Doodle Bug...
Music - Whenever - LiQWYD _ Background Music No Copyright (Chill)-JyVdGVLWBV8
Instagram - Doubledown555Black66
______________________________________________________________________
Parts used -
Slipstream billet flywheel - www.ebay.com/i...
VM22 Mikuni Carburetor - www.ebay.com/i...
Flywheel key - www.eccarburet...
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

[@evilbeetlekustomscreations4965]

I bet the neighbors where you test ride just think to themselves man that guy freaking loves his mini bike if they didn't know you did a KZbin channel that is freaking awesome by the way🤘👍👍

[@562jamesj]

You ought to do a video on VP Octanium and these bikes with the added timing a before and after top speed and 0-30 would be cool

[@562jamesj]

Love the videos bro best minibike channel on your tube!!

[@Black66]

Thank you!

[@albertmichall5732]

@@Black66 And the most professionally of all that are out there too

[@licence1001011]

Ps ur my favorite out 3 or 4 people I watch on KZbin for mini bikes

[@albertpeterson7134]

Black66 I Have Been Enjoying The Comparison Videos. I Have Been Trying To Find The 7 Degree Flywheel Keys. I Was Wondering Where You Get Them? I Can't Seem To Find Them.Thank For The Videos Keep Them Coming

[@Black66]

Here is a link www.eccarburetors.com/advance-timing-key-predator-212

[@albertpeterson7134]

Thank You

[@marshallpayne3464]

Have you considered doing a 225 Tillotson swap and building that up? I wonder what your top speed would be. I have a stage one 196 but I can’t decide if I should do a stage two on it or swap for a 225 and start building that. I’m currently at 49mph on my Trailmaster mb200.

[@Black66]

Check out the Mega Moto playlist for the Tillotson 225 build kzbin.info/www/bejne/jJPGoXRmn8mGf9k

[@jeremycrabtree7683]

Bro if youre doing any where near 49 on a stock 196 w stage 1on that big of a bike then keep it!

[@slainesir432]

What do you think about the tilly stage 2 engine that gopowersports sells complete with removed gov, considering it

[@Black66]

I think it's awesome as is! It already has billet parts so you can modify it to the next stages easily if you wanted even more out of it. Great engine!

[@joshuarogers5233]

I'm trading all three of my mini bikes for a 2003 Harley Sportster 883 custom 100th year anniversary with only 3531 miles on it. And it has alot of up upgrades.

[@Black66]

Sweet! That should be a blast!

[@BuddyVanDoodle]

That’s mint ready for the jump 😉

[@MikeBeatzcom]

I just purchased ARC Billet Flywheel do I need to grab anything else? I have a 212 Predator Hemi x Stage 3 pipe with trumpet x Autolite AR3910 X spark plug

[@PopeyesCreeper]

the racersproquip put together a full on stage 3 kit for the 224, seems interesting but im not sure about their billet rod choice

[@Daft_Dhwelk]

That was scary fast just to watch. Are your brakes good enough?

[@Black66]

If you think that one was scary. Check out this one kzbin.info/www/bejne/roebmmhvlqyIl9E

[@lorenzocornelio8595]

@@Black66 Hey man are you going to do anymore mods on your ctu200u with the 224cc?

[@Black66]

@@lorenzocornelio8595 Check out the 224 playlist. I installed the 224 on the cc100x. Many more mods to come on the 224 kzbin.info/www/bejne/fHeakp9vfpeXpNU

[@lorenzocornelio8595]

@@Black66Thanks man what website can I purchase the carb at?

[@Black66]

@@lorenzocornelio8595 I put a link in the description of the video for the carb. Thanks for watching the videos.

[@arronjohnston742]

pity they don't machine those flywheels so you can put the e-starter ring on them (or come with it already installed)

[@arronjohnston742]

@@Bread45 not everyone want's to spin 10,000rpm dude 🙄

[@RevHeadz95]

Some do!

[@RevHeadz95]

Cast aluminum with the gear on the flywheel Handles 10k rpms, while having the e-start feature available

[@century8709]

Just wondering would this have any cooling problems

[@Black66]

No, not a problem yet. It runs awesome with the billet wheel.

[@nylec.miller1861]

Upgrade your front with the disk brake kit. Gotta be able to stop. Stock rear brakes suck.

[@Black66]

Check out the Doodlebug playlist. This bike has had many different engine combo's and brakes kzbin.info/www/bejne/iaalf61mn61oprc

[@angelrojas2823]

Do they make a flywheel to keep electric start

[@Gazanova85]

I'm sure they do

[@Bighemi82]

What's was the weight difference between billet and stock flywheel

[@SoLoCruizer]

does the 212e gopowersports stage one they have for 525.00 does it come wit the gov removed

[@AJC-jo3ds]

They should offer a high rpm flywheel with starter ring so you can use the starter..

[@FreeRunMonster802]

The factory tillotson flywheel is high rpm rated.

[@RainbowSheep_was_taken]

@@FreeRunMonster802 how high?

[@RainbowSheep_was_taken]

i think they offer starter rings and maybe flywheels with teeth already on it but im not sure if its for a big block or small block

[@jwalkerftw]

Can you still use the electric start with this fly wheel?

[@Black66]

No , not with this wheel

[@SoLoCruizer]

u think that carb would run good on my ducar i just found out it only has 24mm exaust valves smh it still screams tho

[@Black66]

Yes, That carb should run really good on the Ducar!

[@SoLoCruizer]

I like it don't see u using the estart too much

[@abesalazar2716]

So Does a flywheel actually add anymore speed or horse power ?

[@Black66]

It adds timing and safety. With the added timing they generally add performance depending on the cam or set up. . I have a few videos on the channel comparing the performance of different flywheels.

[@javierpagan364]

What chain are you using on your bike?

[@Black66]

Normally I will use RLV gold on gold

[@TheSmore15]

Are you in Oregon ?

[@Black66]

I'm in AZ

[@Deucealive75]

What was the timing with the 7 degree key? In other words, you went from what timing to 34 BTDC?

[@tannergunsell1651]

@deucealive75 ?? He used stock fly wheel key. Billet flywheel come with advance timing already, (34). If he used they 7 degree key to make 34, would have started with 27 degrees. Easy math.

[@Deucealive75]

@@tannergunsell1651 Of course. I was asking to see if he did anything different than what I thought. If he went from 35 BTDC to 34 or not. If so his gains were from a lighter flywheel and not timing. Stock flywheels are 28 BTDC, unless Tillotson is doing something different than standard.

[@jamesfalvey77]

Would you happen to remember the sprocket sizes?

[@Black66]

Its been a while Im not sure. Check out the doodlebug playlist for many combos with this bike. kzbin.info/www/bejne/iaalf61mn61oprc

[@jamesfalvey77]

Great channel. Keep it up

[@Ghost_Minibikes]

how did you make the 50 thousandths sleeve

[@Kjjjjj445]

I just installed the vm22 mikuni on my pull start tilloston 212 an it’s over heating like the block it’s very hot not as usual what you think it could be black66? I’m doing 51 mph with stock timing

[@jtaylor9355]

Sounds like its running lean ... makes more heat in the cylinder

[@Kjjjjj445]

@@jtaylor9355 I think so too or is it the pilot jet making it run lean?

[@jtaylor9355]

@@Kjjjjj445 does the block get hot just sitting there at idle or after a cruise?

[@Kjjjjj445]

@@jtaylor9355 just a little bit at idle but ik it’s not really supposed get to hot that when you touch it it kinda burn you it shouldn’t be like that then after a cruise it’s really Steaming hot.

[@jtaylor9355]

@@Kjjjjj445 does it bog or feel like its being held back when accelerating? I would try 1 step richer main. But first are you running a timing advance key?

[@rickgrimes4133]

What kind of fuel are you using?

[@minibikemafia7346]

I have a question. On my Predator 212 hemi it used to sound normal with a short header pipe, and today I just started it for the first time and it sounds way different, it sounds like a bubble and it’s acting strange. I can’t rev it with choke off when it’s warm, I let it idle on start and then flip the choke to run and it idles fine but when I give it throttle it dies? Please help me

[@Deucealive75]

Possible clogged main jet or etube.

[@A_Man_In_His_Van]

Clogged pilot and or main jet. Are you using ethanol fuel? If so, don't drain the bowl unless you are gonna store it for a month or more, and you are draining the whole fuel system anyway. I found that when I drain the bowl repeatedly after every ride, or running the engine, the quick evaporation of the fuel as compared to just leaving the gas in there promotes crystallization of any particle of dirt that may be in the pilot jet. I have pushed what look like little grains of sand out of my jets, but they crumble between my fingers. It's probably just the gas here in the Midwest, idk.

[@shanewondrak9661]

Oh shit. I know where you live! Don't worry, no surprise visits from me.

[@Black66]

Check out this video, I moved kzbin.info/www/bejne/roebmmhvlqyIl9E

[@thefishingchannel3192]

From your experience how many rpms is a stock predator 212 engine good for? I have a very thin budget. I would only be able to buy either a lightweight flywheel (non billet) or a billet piston rod. I really don't want to blow a brand new engine up but don't know what would fail first at high rpm

[@Black66]

Maybe you could do something like in this video kzbin.info/www/bejne/o2nEgH-jqt-fe5o

[@thefishingchannel3192]

@@Black66 I just remembered you posted that video and I'm going to end up doing the build in that video thank you

[@562jamesj]

The flywheel is the bigger safety threat and bottleneck. If forced to pick one go flywheel. Stock rod will hold mid 5k no problem

[@thefishingchannel3192]

@@562jamesj that's what I'm going to end up doing. I'm going to Polish the piston rod so i have a little more peace of mind lol.

[@562jamesj]

@@thefishingchannel3192 rods only $65 try to grab one asap to be safe and not blow the thing if you plan on going to 6k or above

[@evandensler7208]

where can i buy a crank holder

[@Black66]

GoPOwerSports has them

[@mrneanderthal2891]

Guys got fun money

[@Black66]

Check out this bike kzbin.info/www/bejne/roebmmhvlqyIl9E

[@davidalexander8266]

You got balls to ride that till you wreck at 60. Lol.

[@Black66]

Check out this video. I do over 70MPH! kzbin.info/www/bejne/roebmmhvlqyIl9E

[@joesfreshaquatics6488]

What happens if crank is held down while tightening

[@Gazanova85]

It's supposed to be held down

[@Gazanova85]

The advance barley did anything

[@Black66]

Check out the new Timing advance video! It made a big difference. kzbin.info/www/bejne/iavToZqvrplgo9E

[@licence1001011]

Dood u sent me your email...but haven't emailed you yet....if u can help me out when I get my next 1200bucks, ima need some help or advice for tools and parts to mod the engine on my Coleman...id pay you for your time. Let me know and thank you