TIMBER!!! Sick of picking up limbs / VEVOR CHAINSAW Demonstration and Review

Рет қаралды 1,181

Күн бұрын

Пікірлер: 37

@anthonyavarello2734 Ай бұрын

Got it started fyi make sure when the choke is pulled out and your starting it for the first time to pull 3 times so it half revs then push choke in and then it pull the starter cord and will fire right up. Cuts great and now figuring out the start the thing it’s definitely worth the money I may get a new bar and chain plus and new spark plug but the saw cuts great…. Like I said have 3 or 4 items in my garage from vevor and they all work great. Thanks for the help Mr.Eddie ! No primer bubble! Just choke the instructions are mis leading but overall a decent saw for the money

@papawsplace Ай бұрын

Glad you got it figured out. I've been out of town so I'm late replying.

@Jaythedrummer352 Ай бұрын

I got one and easy pull! No forcing at all slow no hard pulling all the time! One pull slow and easy and it's going😊 love it I got many other brands and they suck

@papawsplace Ай бұрын

Yes sir it's is a very good saw. Better than others that cost twice as much.

@monkeyfoodgarden Ай бұрын

Good evening Mr Eddie. Think Vevor makes everything😂. Actually looks like a nice saw did a good job. Would be nice for around the homestead since i didn't use my gas saw but a few times a year. Have a blessed evening.

@papawsplace Ай бұрын

VEVOR has everything and pretty good stuff

@anthonyavarello2734 Ай бұрын

Is there a bubble for priming ?

@randomizer1355 Ай бұрын

probably

@anthonyavarello2734 Ай бұрын

Well there ain’t on mine

@randomizer1355 Ай бұрын

@@anthonyavarello2734 ok many chainsaws do have one but also many dont

@anthonyavarello2734 Ай бұрын

According to vevors work instruction there is a bubble for priming the engine it’s not there. Vevors technical support is from China so waiting to hear response. So far they sent me a video of a random leaf blower with a starter ….i have bought a drywall sander a pole saw and a back pack blower all worked except this saw so perhaps operator error

@anthonyavarello2734 Ай бұрын

Running 40:1 tru fuel

@bernardcaillouet5565 Ай бұрын

That is impressive for a $129 dollar saw on Amazon.

@papawsplace Ай бұрын

VEVOR has good items.

@timburton9514 Ай бұрын

Your little Mahindra tractor will be handy hauling that tree off

@papawsplace Ай бұрын

Yes it was that for sure.

@anthonyavarello2734 Ай бұрын

I can’t start the thing

@randomizer1355 Ай бұрын

make sure you have the right gasoline (the correct mixture) and if its got a primer bulb (carries gasoline to carburetor to start the saw) press it like 6-10 times. the primer bulb should be translucent so if you see the primer bulb is almost full your good to go. you cant and dont gotta get it to be fully full with gasoline. also make sure the carburetor is adjusted correctly. the manual probably has a factory setting for the carb. my chainsaw (not vecor) has a manual where its described how to adjust the carb. my english is not perfect bc its not my main language

@randomizer1355 Ай бұрын

this text should help you: Starting failure 1. Check fuel for water or substandard mixture. • Replace with proper fuel. 2. Check for engine flooding. • Remove and dry the spark plug. • Then pull the starter again with no choke. 3. Check spark ignition. • Replace with a new plug. Lack of power/Poor acceleration/ Rough idling 1. Check fuel for water or substandard mixture. • Replace with proper fuel. 2. Check air filter and fuel filter for clogging. • Clean. 3. Check spark ignition. • Replace with a new plug. Lack of power/Poor acceleration/ Rough idling 1. Check fuel for water or substandard mixture. • Replace with proper fuel. 2. Check air filter and fuel filter for clogging. • Clean. 3. Check carburetor for inadequate adjustment. • Readjust speed needles.

@anthonyavarello2734 Ай бұрын

Started up this morning probally just a flooded engine let it sit for a day

@anthonyavarello2734 Ай бұрын

Cuts like a dream

@randomizer1355 Ай бұрын

@@anthonyavarello2734 so it started up? great! if you flood your chainsaw a neat trick is to hold the trigger at full throttle and while holding full throttle start your saw. idk how pulling the trigger at full throttle defloods the chainsaw but it works always.