Time RXS Ti Road Pedals Bearing Replacement + Complete Overhaul.

[@cannondany]

0:35 axle removal 1:03 bearing removal 3:47 bearing installation 5:35 spring tension adjustment 6:07 YOUR IDEAS for removing the spring? 7:31 how to release the spring

[@renejohe2058]

FYI the cartridge bearing is 6801 12x21x5

[@learnalanguagewithleslie]

Question: are these hollow axles? If so, do you know what the diameter of the internal hole is? Can't find this info anywhere. Thanks.

[@stevecooper3]

What about the other bearing at the other end of the pedal? You did know that there are 2 bearings in each pedal right?

[@garygrainger5810]

Was going to ask that too…😅

[@jamiepjc]

Hi mate,at about minute 1:02 you pull the axle back and forth and state the movement isn't bearing play,what is it as I have 4 pairs of rxs and 1 pair has this "play " and the others don't,is this anything to worry about and can it be fixed, cheers

[@Tomokiinlondon]

Forget what Mark W says. The music made it better in my opinion. No need for voice over as it was clear what you were doing. Nice video - thanks

[@piglegluckson9156]

What dedicated tool should be used for axle removal on this video (0:30- 0:49) to prevent marking &/or damaging the cap part? Thankyou.

[@sebastianm2381]

I've been wondering as well. I suspect if there might be a proprietary tool by Time. But I've never seen one for sale. And after all, Time do no market these pedals to be serviceable to my knowledge. I've never managed to remove the spring either. I own four different versions of this pedal. It seems that the rod which the spring sits on has been pressed or glued in. I'm not sure it is removable without destroying the bond with the pedal body. I have a broken RXS pedal lying around. I might just give it a go...

[@fabiokataoka]

Guys look no further! I found the extraction tool on ebay! It´s cheap and it works flawlessly! The link to it is: www.ebay.com/itm/J-L-Spindle-Wrench-or-Ceramic-Bearing-for-Time-XPRESSO-Xpro-RXS-Mavic-Pedal/202492495951?var=502619318100

[@rossdonaldson5545]

Can I send you mine to service please? 🙏🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@CharlesM236]

time iclic carbon red ballbarings ? replacement ? yep and cleaning house ::))

[@MarcWdives]

Danny, my opinion would be to lose the music and black gloves. Voice over is easier to watch.