Marketplace Raptor Rebuilds | Yamaha Raptor 660R Rebuilds

#yamaha #raptor #atv
In this video we had 2 Yamaha Raptor 660Rs that both needed top end work. One got a new rebuild, one got a timing job, broken starter clutch. Broken flywheel, timing chain stretched, installed a new tensioner. We fix it all in this video.
timemachines.shop
Insta: @timemachinesatvs
FB Group: / 253442778458579
Send us your videos and non weird sh*t: [e-mail]
Send us your love letters to:
TimeMachines
P.O.Box 210
Rhome, TX. 76078

[@michaelhathcock7941]

"Look at this piece of shit!" As it cannons smoke into air... I spit my beer out 🤣🤣

[@TimeMachinesATVs]

Dude description: both ran when parked. Talk to him. Before ya bring it , it aint gonna blow smoke everywhere right ? Blue one smokes a little lmfao

[@michaelhathcock7941]

Every damned time man! 🙄

[@elgroucho7563]

Thanks for the info- got a few Kodiak 450’s, Raptor 350, a Suzuki 250 and a Honda 80 so always learning and watching.

[@user-ff4iy2ni6z]

Technology has came a long way😂😂

[@dustytrailswithepa]

Great Job ! They both sound good

[@EastGillyOutdoors]

People may hate on the 660s but there is no doubt that they HAUL A$$!! Look at the smiles on those faces!!

[@TimeMachinesATVs]

Was my first raptor! Theyre always fun

[@jasonb.1749]

​@@TimeMachinesATVs Can you help me with my Raptor 700r. I'm local to you. I can shoot you an email.

[@DJswope73]

Some 4 choke action🤙 hope all is going well for you guys.

[@ronnielamb5958]

FUCC YEAH BROTHER ITS ALWAYS A GOOD DAY WHEN TIME MACHINES POSTS A NEW BANGER

[@markbarton4344]

Definitely gave them both new life from neglected back into service!👍👋

[@gaybowser3582]

We do love to see it

[@enor1sdca]

LoL "Raw DawG" the cylinder

[@tinygaragepowersports0122]

RWL Maxxis tires...hell yeah. Nice work, boys. Couple of rippers....even if they are YamaBlahs :D

[@blaketurner5799]

Done watched this 3 times today just because i been waiting for new content

[@Kindaquick1]

Those floats were an impressive amount of bad.

[@TimeMachinesATVs]

Haha quick sink floats. New and trash

[@fluXxSieRra]

RTV brotha RTV!!

[@operatorsolidsnake2542]

Lol I subbed after a few minutes great content hilarious

[@101spacecase]

That big red looks sweet

[@blaketurner5799]

Check out his other videos bro he has the build of it on the channel back a few years of videos, it was a good build.

[@rogsands5644]

Got a 660 Raptor, just rebuilt top end. Runs great, but when I go to 5th gear like I go to neutral? All other gears are fine, any ideas? Love your videos

[@gopherchucksgamingnstuff2263]

I am doing the same thing, rebuilding a 20-year-old Raptor 660R

[@jonathandeoliveira2108]

I know Vito’s performance makes a-wiring harness is for the Raptors blasters and banshees really gone quality better than the OEM connectors and you can customize them to delete all the parking brake stuff

[@darrenwalker2365]

Get up in there

[@geronimosadventures1111]

I love these old 660's!please more raptor 660 content😁 I am still building my own 660 from trash😄lots of fun to spend mooooooreeee money in it 😅

[@Kevin_Yagoonie]

I'm build one also. It's my first Raptor 660

[@donaldvagi8150]

What a roller coaster of emotions 😂😂😂😂

[@waynemuskett1624]

Hello, I have a 2001 yamaha raptor 660r. Ever time I press the gas it bogs down. I seem one that you fix just by cutting parking brakes I think that's what you said. I haven't cut it yet I don't want to cut the wrong wire. I need to ask you first .

[@threespeak4461]

I’m trying to sell my 2005 660R that has been sitting for like 10-12 years. What should I ask for if I don’t have the time to get it running? Looks decent and ran when I parked it in the garage.

[@bryantblackwell1339]

I really need help on info of the rear swing arm it was tore apart and now i dont know how its supposed to go ive put it together many times and its still sloppy plz ppl

[@mattdogg02]

Turning the key and it backfiring... bwahahahaha

[@TimeMachinesATVs]

Felt like i was in the hood n needed to duck

[@Neworleansickk]

“Y’all ready to ride “😂 as it smokes heavy like my days back in college

[@TimeMachinesATVs]

Man it robbed us all of a video i was gonna send it and it died think it fouled plug

[@Neworleansickk]

@@TimeMachinesATVs definitely will be tuned in to next episode gotta get up in there bro !🔥

[@ALuna244]

Every 660 i come across has the starter clutch issue. Mine also had the parking brake issue and the cdi was handled by Edward Scissorhands.

[@eddiesheeran5791]

This is great, I really like on-the-fly diagnose & repair videos. How do you gather a limitless supply of machines like that? Do you find deals, do the repairs, and then resell them for a profit so the whole venture funds itself? That's awesome, I want to do the same thing.

[@RYANINBODEN1547]

Do you have any 660r parts you could sell? I'm looking for an entire top end, cam chain, side cover with stator and oil cover and starter gear. Im really just starting at a $50 good bottom end with a frame and swingarm so i don't mind putting money into it.

[@moisesmartinez1767]

Hey guys i know this vid is old but i got a 2003 raptor with 686 in it i put new carb new jets 160/165 turn the dial 3 turns on the first carb and 2 on the second the battery is new but it wont turn on any help will be highly appreciated

[@Kevin_Yagoonie]

Need help. I completely cleaned and rebuilt the OEM Mikuni carbs. Every piece of the carbs was replaced with OEM and a Dynojet kit. Pro circuit exhaust and open k&n filter. Sea level. 146/148 #25 pilots 3rd clip on needles and 3 turns out on fuel. Quad starts, idles and revs up awesome! I took it down the street and it rips! BUT I had a low rpm bog in 2nd gear. Any ideas? Maby a tad less fuel in left carb???

[@jasonhudson5861]

Any popping off acceleration an did you make sure your floats are leveled if it only does it on throttle then it sounds like a jet issue double check your jets make sure there the same size. you could always lower the needle height for less fuel as well. Remember main jet for throttle an idle jet for idle. mixture screw is set different an should be set to the machine. So set it to whatever the manual says an it’s usually slowly turn till it runs poorly an back off till it does the same an find the happy middle shouldn’t be the mixture screw tho. Sounds like your on the right path with the too much fuel somewhere. Could be your float is a little wack on one side of the carb just a hair off can make it feel weird

[@jasonhudson5861]

An does it do it cold hot or always if it does it always then it’s prolly something to do with the carbs if it does it when it’s cold then there’s your issue let it warm up a tad valves can cause issues but it doesn’t sound as if that’s the problems compression test would help an adjusting the valves is relatively easy as well if it starts hard or has hard starting then it could be valves. An that’s a whole other mess of diagnosing but relatively easy as well

[@lexomotorsports]

Yeah buddy 👍 shit sixty 😮

[@daltonburkholder5485]

Can you do a video on how to adjust the carburetors

[@AndrewHutchison-bc2vy]

Hey do u got a set of frount shocks for a 400ex. U would sell if u do could u send them to me and i need tie rod ends for a 400ex too. And if u have a 1991 trx 250x hole top hole top end thats good let me know

[@chevy43]

RTV it up 🤦🏽‍♂️ 😂

[@rogsands5644]

the timing chain guide piece that was broken, did you fix that ?

[@TimeMachinesATVs]

No replaced it. Issue was chain. They ruined tensioner lmao

[@easylee1417]

Watch the second gear on those ol Yama dawg raptors lol

[@TimeMachinesATVs]

Scnapps

[@easylee1417]

@@TimeMachinesATVs just messing with ya anyway those are real nice machines keep up the good work can’t wait to see more videos especially three wheeler ones lol

[@Hanky_Bannist8r]

I literally laughed out loud when I saw the floats in that carb. Chy-Na trying to burn this bitch down one quad at time.

[@yannixenos2314]

💯👍

[@That1E_K1129]

You ever run into those cars and camera guys at pate swap meet? I see they go every time it comes around. I wish we had a meet like that in my area that'd be sick but I live in a shitty bumfuck town😂😂

[@evanwilliams2602]

Why does this happen on every raptor mine did the same thing as yours lol

[@evanwilliams2602]

660 vs 700 dude!

[@natesyring8981]

And it looks like you might have the fucked up a arm dilemma too😂😅😢

[@Daszebi98]

Hello I own the 660r too and Wonder what IS the best sounding exhaustpipe for Drive legal Roding on the Road ?

[@adamdg12]

just pull out the baffle from the stock one fuck a legal exhaust

[@Daszebi98]

@@adamdg12 nah not in germany

[@jasonhudson5861]

@@Daszebi98 just go with anything full an you won’t have complaints just a muffler won’t really change much an make sure you get the recommended jetting as well an follow others steps in tuning the quad when you do removing the baffle will just annoy people an make it sound more Ruff

[@coltonupchurch4368]

He'll ya

[@Spacecruizer203]

Lol

[@lamronnaquavius]

have you guys just never heard of a break in and that one blonde guy is js goofy he don’t know what he’s doin 🤦‍♀️

[@TimeMachinesATVs]

Lol if you say so. Thanks for watching anyway