Tip to Prevent milky paint!! Florida, Texas, Louisiana etc.. know how to get out of trouble fast

fixed threaded fitting to eliminate the swivel
amzn.to/3vOqehS
black widow 2.0 rear fan control
high humidity tip for DIY guys spraying
clear coat AmTech product of ProSpray
www.amazon.com...
Base blender/wet bed
www.amazon.com...
Compound
www.amazon.com...
3M machine polish
www.amazon.com...
Presta Fast Wax
www.amazon.com...
Prospray spot blender aerosol can
www.collision3...

[@thetriggerman954]

Sorry guys forgot I had this one completed. It's 3 months old. Better late than never. Old 1,000 subscribers hat 🤠

[@clevewilks4312]

Don't you say at the end. Base coat check. Clearcoat check and then you say Single stage check. Lol

[@thetriggerman954]

@@clevewilks4312 Yes I do and that's because I sprayed base coat with it and it worked, I sprayed clear coat with it and it works, I also sprayed a single stage job with it and it worked. You look back a few videos on a red Impala I use this gun to spray a single stage job.

[@thetriggerman954]

@@clevewilks4312 don't get missing on me now. You went through all that hard detective work to find out so let me know 👀😉😅

[@clevewilks4312]

@@thetriggerman954 Lol My bad. Now I understand what your saying. It's the gun you sprayed Single stage with.

[@thetriggerman954]

@@clevewilks4312 right on 🤜🏼🤛🏼

[@stackindimesracecars3924]

Best Painting Demonstration and Tips on The Net. Keep Doing Your Thing Trigger. Thanks!

[@thetriggerman954]

🙏🏼🙌🏼❤️ thank you

[@sideshowscot7815]

Fantastic video trigger as always. Even as an experienced painter I always come away from the channel learning new tips. Keep up the great content and work with the channel. I understand it is very time consuming especially with all the editing software etc. You have the best painting channel on KZbin. I have followed a lot over the years but yours is the best by far. So much so I don't bother with other anymore. Spray on brother 🤜🤛

[@thetriggerman954]

Thank you Scot 🫡🤎

[@ericbrown-ti5kb]

Hey Triggerman..glad to see you back in the lab..much appreciate the information you provide to your viewers..I myself is in Louisiana and this weather is very unpredictable specially for the type of work we do..however your showing and giving some valuable information in what you do..always willing to learn tips and tricks of the trade..everyone can make a mistake..but knowing how to correct or prevent one from happening is the key..again..thanks man for the lessons..if no one share their thoughts on how your showing your tips..I'll be the first to say..great work your doing!..😊..take care and God bless.

[@thetriggerman954]

Thank you Eric I appreciate that my man. Like my instructor always told me spraying a car with no issues doesn't make you a great painter, it's when you run into problems and knowing how to fix the problems that's what makes you a great Painter. And I 💯% agree. Thank you again Eric ♥️

[@ericbrown-ti5kb]

@@thetriggerman954 Well said my brother..it's just paint..now let's have some fun!!..😂

[@UndergroundPaintKing]

😂😂😂 guess I better start looking at other states to move to, I don’t know if I want to deal with Tri-polar weather 😁 another 🔥 video Triggerman 💪🏾💯

[@thetriggerman954]

Yeah man Tri-polar but I got the hook up. I'll point you to the safe zones. We'd be honored to have the Peoples Champ 🏆 in Florida 💪🏼💯

[@UndergroundPaintKing]

@@thetriggerman954 appreciate you bro 💯💪🏾

[@joewolf4483]

I've never had much luck getting rid of blush ... looks like it came out nice ... and you're right about the color ... don't think its in much demand ... good job Trigger ...

[@thetriggerman954]

Thank you Joe, so how do you get rid of it? You have to have some type of game plan ready 🤔

[@deanbrown7643]

Been a while since ive been on trig got a few issues going on over here but i am still watching 👍👍

[@thetriggerman954]

Hope all is well Mr Brown 🤎

[@deanbrown7643]

@@thetriggerman954 At the moment not so sure undergoing tests ????

[@MrSticks9999]

I don't have blush problems with urethanes, typically. Now if spraying a lacquer . .yes sir!! :)

[@thetriggerman954]

Well aren't you the lucky one 🙄 show off 😜

[@bradleyyounger8499]

That's wild. Never seen that before.. looked like a windshield fogged up

[@thetriggerman954]

Yes that's exactly what it looks like. Humidity was like 90% that day. Awful

[@JohnWD40TC02]

Hi Trigger, I think we call this bloom here I've had it happen once so I put my IR lamp on it and after about 10mins it was gone👌really enjoyed the video boss as you always explain everything you do and what you do to fix any mistakes, as you probably know I'm just a DIY/hobby painter and I've been doing this for almost 4 years so I appreciate your help and advice👏👌👍John UK

[@thetriggerman954]

You got it John. More than welcome my man. And yes that IR light saved the day 🥳🍻🍺

[@JohnWD40TC02]

Ok thanks Trigger, I've learnt so much from you so I'm looking forward to your next video👌👍

[@jamesward5721]

Rockstar vid as always Trug. Had a damaged van in for repair & paint - son chucked me his cast-off "Pro Grade" gun, he upgraded - I usually use cheapo p.o.s guns 'cos I'm cheap. Paint came out like glass right off the gun. Everyone here commented on how glass the finish was compared to the usual I put out. What changed? Paint didn't, primer didn't, method didn't, environment didn't - only the gun changed, went from a 50 quid gun to 200 quid gun & man did that make a difference. Every control did what it said - fan adjust adjusted the fan. Needle control adjusted the needle. Pressure adjust adjusted the pressure - I could set that gun to dance compared to the muck I'm used to where nothin adjusts nothing with any precision. Buy you a good gun Trug viewers - good guns matter.,

[@thetriggerman954]

That's awesome 😎 yes at some point when you want to step things up a notch you have to make an investment but that's after you've maxed out the cheap guns and have the experience to knife the difference between the two. Sounds like you nailed it congrats brother 💪🏼💪🏼

[@jamesward5721]

@@thetriggerman954 I cleaned that b*tch so well after I used it, it gleamed - i want it to keep doing what it does. Changed the game for me - I always went the "It ain't the gun it's the painter" route - turns out a lot of it is the gun.

[@thetriggerman954]

@@jamesward5721 🍻🍺🍻

[@TheDopeShow81]

Seen this color pass me the other day and I was thinking, what a nightmare. I might have to try using a wet bed more. I have to deal with heating issues in my booth and often the panels won't cool down and the metallics stand up like you wouldn't believe lol.

[@thetriggerman954]

Yeah man on certain colors and in certain temperatures the wet bed can help. I honestly try not to depend on it. I like to keep my skills up to par without it but I know there is that 10% time that applying it does make things easier. Thanks for watching my man 🤜🏼🤛🏼

[@davidbeck1614]

I had always heard of blushing but never experienced it until about 12 years ago. Painted a drag car for a cousin in hot rod black laquer primer. It was raining outside and it blushed to almost gray. Resprayed it and it turned out good. You dont hear of blushing as much nowadays with 2k products. Good video!

[@MrSticks9999]

Lacquer is very sensitive to moisture. urethane, not nearly as much.

[@thetriggerman954]

Yeah lacquer was the worst That's back when you used to have to put retarder in the paint I don't get it nearly as much as they did back in the days but it still does happen better off someone knows what to do in case it does happen 💪🏼

[@andrewbodey5025]

A ninja hit 8k SUBS! Any yes, Im coming to Florida!!! haha

[@thetriggerman954]

🥳🥳🍻🍻🍻🍻🍺

[@KILLER_BEE_98]

Love this video, your alter ego is funny as hell 😂 😂😂 Yo , I’m just outside of Virginia Beach. Our weather is crazy too , but I’ve never experienced that before. I’m glad you showed us that. I would’ve been pissed off , and wouldn’t have known what caused it. Thanks Bro!

[@thetriggerman954]

You're more than welcome KB yeah man if your paint ever starts to look milky and cloudy it's humidity stop anything that's bringing the humidity across your vehicle, stop all air flow and or use heat. Thank you for watching my brother 🤜🏼🤛🏼

[@KILLER_BEE_98]

Thanks man. I enjoy your content. Keep being it!

[@rubenthemastertech8631]

I use the black widow. Nice gun sprays very well

[@thetriggerman954]

I agree. Very nice gets the job done 😎

[@Snip59]

Back on the Tools yes good to see my man.

[@thetriggerman954]

😎🙌🏼

[@Snip59]

@@thetriggerman954Phil from Sydney look forward to many more indeed cheers my man.Have a great day.

[@thetriggerman954]

@@Snip59 thank you Phil have a bless one my man 🤜🏼🤛🏼♥️

[@MrMelvinkennedy1]

Happens in my cross draft from time to time with clear. I just finish as normal and walk away. Come back the following morning and it’s clear as glass

[@thetriggerman954]

Well you are one of the few that happens to if you read through the comments happens to many of us but unfortunately it doesn't magically go away so knowing how to get rid of it can help some guys.

[@MrMelvinkennedy1]

@@thetriggerman954 I’ve only had to repaint once due to blushing other times a heat gun/heat lamp or just allowing it to sit has always worked for me atleast. I’m sure that varies from clear to clear though. Definitely appreciate the video on it as like anything else different ways does come in handy at some point

[@davutyalcin-]

Finally a new video 👏🏻 Waited so long bro Keep up the good work! Peace from the netherlands

[@thetriggerman954]

Sorry I made you wait 7 days 🤣 wish I could release a video everyday for you my man 🤜🏼🤛🏼❤️

[@davutyalcin-]

@@thetriggerman954 for sure bro 👏🏻

[@davutyalcin-]

@@thetriggerman954that color right there you where painting and other light colors such ass silvers are pain in the ass bro,i still got problems with it sometimes

[@thetriggerman954]

@@davutyalcin- shit even I have my bad days with them. It comes with the territory 😫

[@jonnyditto4440]

Just got the black widow can’t wait to try it out !! Nice video brotha

[@thetriggerman954]

Thank you Jonny appreciate it my man. You'll love the gun. 😎

[@Forbettafuture]

Damn brother you murdered that color shi look like the new lexus colors

[@thetriggerman954]

Thank you my man. Was actually Pretty easy one to spray 🙏🏼💪🏼

[@Forbettafuture]

I just told my wife i lived in your state you couldve painted my rx300

[@Forbettafuture]

That good paint to

[@thetriggerman954]

@@Forbettafuture ohh you got the lex SUV noooice 😎

[@Forbettafuture]

Yea i have 2 tone but they made a special one called silver sport and that came one tone uuff crazy

[@hillbillycustom1730]

That was the new jeston ride😂😂😂

[@thetriggerman954]

Yeah man you remember that 😂 that George was one cool MF 😁 Jane was hot too 😲🤦🏽‍♂️

[@hillbillycustom1730]

@@thetriggerman954 yes George was so cool Jane lol hell yea

[@gregoryjowers3629]

Home owner insurance and car insurance in Florida is expensive oh with wetting the floors adds more humidity to I ran into it last year in my garage

[@thetriggerman954]

I rather fight humidity than wet sand and buff 😉🤣

[@gregoryjowers3629]

@@thetriggerman954 heck yeah trigger I’m with you on that

[@wrightsrrt871]

Good video brother

[@thetriggerman954]

Thank you sir 🫡

[@wrightsrrt871]

@thetriggerman954 also glad to see you fixed that swivel lol that thing is annoying as it gets 🤣

[@thetriggerman954]

@@wrightsrrt871 man you aren't kidding 😂

[@Chili_G_77]

Good Shhh...tuff Trigger!

[@thetriggerman954]

Yes sir. Thank you sir 🤜🏼🤛🏼

[@diggy561]

Painting the reliable Mazi, definitely no Rati.

[@thetriggerman954]

Yeah Mon 😎

[@lesliwells5433]

AWH TRIGGER,AWH TRIGGER,WHAT ARE YOU DOING WITH THAT BLACK DEMON CAR,RUN TRIGGERMAN, RUN

[@thetriggerman954]

🙏🏼🙏🏼🙏🏼🙏🏼

[@travlite8496]

I'm in Ohio i get that humid crap all the time man nice job with the BWhte

[@thetriggerman954]

Yea that humidity can ruin your day quick if you don't know what to do. Thanks for watching my man 🤜🏼🤛🏼

[@beachcitymobile]

It's frustrating for sure, and I've only ever been able to get rid of this with more heat. (You know, like setting it afire. 😁 J/K...well...maybe.... 🤔😆 😝😝 ) Even with no airflow, when the humidity is too high the blushing stays, and if left alone to dry, it becomes part of the final finish. Everything else is right up to that point, then the blushing starts in the middle of spraying. Man, that''ll piss you off.

[@thetriggerman954]

Yooooo bEaChCiTyMObiLe in the house man I've never had one that I couldn't get rid of. Damn you had one that became part of the final finish? Now that sucks 😭

[@beachcitymobile]

@@thetriggerman954 I think it may have to do with the humidity and dew point occurring at a lower temperature were I am, compared to the higher temperatures where you are.

[@thetriggerman954]

@@beachcitymobile 🫠

[@richardblanke5521]

Like Tx here. Have you ever had to run from a hurricane before

[@thetriggerman954]

Nope but I've been in plenty of them. Piece of cake 😁

[@clevewilks4312]

Thanks for your videos and knowledge. But i have one question. Why do yall call Base coat Clearcoat Single Stage? I thought Single stage was the paint that was all in one Spray

[@thetriggerman954]

Thank you sir, and you're more then welcome. I don't know of anyone that calls I don't know of anyone that calls base coat clear coat single stage. Single stage is its own separate type of paint

[@FocusedHands]

Yep im stepping up my game! Why dont you like the swivel?

[@thetriggerman954]

It's annoying and not needed. I don't know any painter that likes their air regulator twisting and turning while they are trying to paint. Feels like it's coming off.

[@FocusedHands]

O im a codes guy! Need to know them codes!😂

[@FocusedHands]

@@thetriggerman954 interesting. I find that the lack of swivel is annoying. My thoughts were it could introduce kinks in my line if not present.

[@FocusedHands]

Ill try without it on a test panel

[@thetriggerman954]

@@FocusedHands air hose coupler has ball bearings that prevents kinks. Just have a quality coupler and no issues. Probably if you didn't really grow up spraying with guns prior to them making theses things it would be more of an issue. But most painters I know have been painting like 20-40 years and hate them. But if they work for you rock out 🤙🏼🤙🏼

[@PrevostNewbie]

is it common on collision work to not remove the headlights bumper etc.? I have to paint my moms car and am wondering if i should take the bumper covers off, lights out etc etc. Looking for Trigger advice.

[@thetriggerman954]

Its common not every shop removes everything. It all depends on the shop. I've worked in shops where they would remove the entire windshield and back glass entire car comes apart and now at this shop on the other end of the spectrum they don't really remove much. You definitely get a cleaner more OEM job when you remove everything. But it does add on an additional day or two just in removing parts, labeling nuts bolts, Then reinstalling everything ideally that is the way you want to do it.

[@PrevostNewbie]

@@thetriggerman954 Great advice Thank you.

[@blakereiter7418]

You run your booth all the time? I got a similar setup but they got the body guys right next to it stripping old schools🤣🤣 i found if i don't run the both at first and just use it after i spray for fumes, i get so much less dirt/static bad stuff lol

[@thetriggerman954]

Yes I run my booth all the time especially 15 minutes before I start spraying. Body Man is on the other side of the wall so not far away 😕

[@blakereiter7418]

@@thetriggerman954 I think the both I use is just too much negative pressure. Like it will pull paper off tables outside of it when I open the door lol. Thanks for responding to us little guys🤣 best paint channel period

[@vasiliskaradimos]

Man.... when the customer don't paint the really price i paint the bumpers like you...on the car ...and i believe it or not i like it. .Just taje off the papers and the fucking car is gone ...hahaha ...😂😂

[@thetriggerman954]

Facts 💪🏼 lol I never use to do them this way but since working here it's actually not that bad only thing masking it up is it pain in the ass luckily we have a prepper with good knees and a good back 😉🤣

[@vasiliskaradimos]

@@thetriggerman954 Hahaha... friend my knees and back is dead and i am only 42....

[@thetriggerman954]

@@vasiliskaradimos that's from masking up bumpers 😭😭

[@manuelmejia76]

Hey bro how can u tell if u need to raise pressure or lower pressure thanks fam

[@thetriggerman954]

Look at the gauge would be the easiest way. But also idle the paint is coming out to peely 'thick" is one sign it's too low. And if coming out to dry is a sign it's too high

[@manuelmejia76]

​@thetriggerman954 he'll yea fam thank u 4 the advice 💯

[@thetriggerman954]

@@manuelmejia76 4sho, spray on brother spray on 🤙🏼

[@trolllibtards2604]

Where do you buy those adapters to eliminate the swivel on the paint gun?

[@thetriggerman954]

Amazon they have all different tyes amzn.to/3vOqehS

[@trolllibtards2604]

@@thetriggerman954What are the fittings called? I want to replace the swivel on my Vevor gun.

[@thetriggerman954]

@@trolllibtards2604 amzn.to/3vOqehS

[@myblkz]

How did you replace the swivel triggerman im looking to get rid of mine

[@thetriggerman954]

There are a bunch of different ones out there This is the one I used coated real good with Teflon tape and you'll be good to go amzn.to/3vOqehS

[@myblkz]

Appreciate it big dog 💪🏿

[@nickcrill7718]

Please stay away 😂 I understand that. I can’t wait to leave my small town.

[@thetriggerman954]

Yea man we're over crowded 🫠🤣

[@nickcrill7718]

@@thetriggerman954 I bet a lot of people moved there during Covid

[@thetriggerman954]

@@nickcrill7718 yes and haven't stopped coming. 🫠

[@nickcrill7718]

@@thetriggerman954 yeah.. you guys handled Covid better then most states so I understand why.

[@BSevenly]

Sup Trigg! got a compressor i’m gonna borrow from a buddy of mine! should be able to throw down with any gun on it! I know you use AmTech clear, what is the model number? is it the euro or no? would you recommend AmTech clear or something different?

[@thetriggerman954]

There is a link in the video description, it's the 4400 and yes the euro clear. I mean it works for me as you see. I'm sure there is some good expensive stuff out there. But this is all I've used for the last 11 years so not to hip to what's out there now.

[@BSevenly]

@@thetriggerman954 😂 I feel you! appreciate it brother!

[@thetriggerman954]

@@BSevenly no problem. Keep me posted on the project 💪🏼

[@davidray4655]

How does the porphis 717 perform compared to the BW? Pete in the UK says the porphis is excellent at 20psi. Just wondered what you think? Thanks Trigger. You da man❤

[@thetriggerman954]

You didn't watch the video I made on those 2 guns? 2 guns 1 cup 717 vs Black widow. U have to watch the videos man 🤷🏽‍♂️

[@davidray4655]

@thetriggerman954 I did watch the videos I guess I forgot. I'm really thinking about buying the porphis 717, but not sure it's any better than my lph400. Just sprays better at a lower pressure, according to Pete. I'd really like your opinion between those 2 guns. I know I must sound pretty crazy but I am 68, so take that for what it's worth 🤪

[@thetriggerman954]

@@davidray4655 if you already have the LPH400 you have zero use for Porphis. And I don't think the gun will operate good at 20psi at least not for me and my materials in my climate here. Not sure where that gentleman you're speaking of is spraying but If you have a climate that you work in that is similar to his and you're using similar materials and you're doing the same type of jobs maybe you can get away with it. Not sure if that's the same guy but a few people have mentioned a guy that paints his garage doing motorcycle parts or something and microwaving clear? If so that's a completely different ball game and I can't speak on what he does I just know for me that won't work.

[@fernandosaldana3665]

And also pete said that the prd 717 is better than lph400 let’s see what trigger said about that.

[@thetriggerman954]

@@fernandosaldana3665 ain't no way in hell 🤣 I don't care who told you that shit. But at the end of the day it's all subjective and we all are entitled to our own opinion. But I vote LPH400 all day. 💪🏼

[@ivayloivanov3010]

this happen to me to day on black metalic ...

[@thetriggerman954]

Ugh 😫 did you fix it? If you did how so?

[@ivayloivanov3010]

@@thetriggerman954 yep... with the good old heat gun

[@thetriggerman954]

@@ivayloivanov3010 sweet 🙌🏼

[@ANDY-we7mr]

There nothing wrong with that 😊

[@thetriggerman954]

💪🏼😎

[@lesliwells5433]

HEY TRIGGERMAN, WHAT BASECOAT THAT COVERS IN ONE PASS THAT'S REASONABLE

[@thetriggerman954]

ProSpray 😉 also matrix

[@lesliwells5433]

@@thetriggerman954 I APPRECIATE IT,I THOUGHT I KNEW,BUT I STILL HAVE A LOT TO LEARN,BUT IT"S just a spray gun so i am going have some fun

[@thetriggerman954]

ProSpray 😉

[@lesliwells5433]

@@thetriggerman954 What"s up Trigger ,I Hope your Having a Good Day,I am Up Early,GOING Back over all your Videos Getting it Deep in my SPIRIT,sometimes i actually miss some important info

[@SpeakerKevin]

I see there's a black hearse in the shop. Aren't you glad you don't do interiors.

[@thetriggerman954]

Man I don't even drive those things. I have a video on my channel I did last year or I show the guys I won't even drive it into the paint booth I make the owner or somebody else to drive it in and out from sprinkles. I'm not with that Addams family shit