Tippmann Stormer Elite, Tincan Shooting

Just some testing with my Tippmann Stormer Elite, shooting at a tincan. Testing a new shim for the hammer spring.

[@stefanogalli637]

You guys got hit by the cold storm i see mister Rune , 20 degrees in the home. And as always thanks for the great video!

[@runerebel8441]

Thanks my friend. Yes its cold here. Take care and have a nice weekend 😃

[@bryancantrell1138]

Cool video. I am glad you are still going strong. I hope you’re feeling better.

[@runerebel8441]

Thanks my friend. I will try and post videos when I can 😃

[@Craig59J]

Hi Rune nice video my friend, it was nice to see you doing the shooting and then tinkering and then going back to testing take care my friend 👍

[@runerebel8441]

Thank you Craig🙏. I felt better that day and wanted to make a video. Its was fun shooting and tinkering. Hope to make more videos soon. Take care my friend 😃👍

[@p.kallas6692]

That's a great looking piece this Stormer. And the power is more then ok. That tin can was really a heavy metal. And again the Master Rune Rebel makes a great video. Thanks for your great work. Really appreciate your videos.

[@runerebel8441]

Thank you my friend. Iam very glad you like my videos 😃

[@JuryRigger]

Thanks for the video Rune! Always fun to hammer tin cans ;) Best wishes, Jesse

[@runerebel8441]

Thank you Jesse. Iam glad you like my videos. Yes hammering tincans is always fun. Best wishes, Rune 😃

[@airgunsanonymouslesslethal1904]

Glad to see you bored today brother!!💪💪

[@runerebel8441]

Thank you brother. I felt better today so I wanted to make a video. Take care and have a great weekend. Cheers brother😃

[@lesslethalfordummies]

😂 i knew we would see you sooner than later. Still good power for only 12g in less than ideal temperatures. The double shot i am guessing is your detent might be flattened. Even the Wixon detents flattened, they just take longer. I went back to use the Lokbolt now. 🤘🏼😁🤘🏼 Never mind 🤣🤣🤣 i should really finish the video before i comment.

[@runerebel8441]

Yeah. I felt better today and wanted to make a video. With 20-24 joule it has still good power for beeing a bit cold. I will put it the detent you gave me next time I use it. The stock detent has probably flattned since it spits out balls through the barrel. I cut a pice off the black spring you sendt me and used it as a hammer spring shim. Seems to work fine with it. I could have cut it a bit longer, so maybe I try that in a later video. Take care and have a great weekend 😃

[@thystruter6869]

Back again!!

[@runerebel8441]

Yes Iam 😃👍👍@@thystruter6869

[@klproduction1045]

great video brother !!!!!!💥💥💥💥💥💥💥

[@runerebel8441]

Thank you brother 😃

[@rquest3059]

Excellent video. You should cut out the top and bottom of the tin can then use a rubber or wooden mallet to flatten it. It would make a solid broader target and might not damage the ammo that much.

[@runerebel8441]

Thanks my friend. Thanks for the info abouth the tincan. I might try that next time I shoot at one 😃

[@Craig59J]

Nice to see you doing videos when you can my friend . Take care and stay strong 🏴󠁧󠁢󠁥󠁮󠁧󠁿🇳🇴👍🏼

[@noobt4eguns]

Nice marker nice power 👍🏻🇨🇾

[@runerebel8441]

Thanks my friend 😃

[@chriswedgworth]

Looks great

[@runerebel8441]

Thanks my friend

[@HIPHOPMENTOR]

👍 ...💯

[@runerebel8441]

Thanks 😃

[@CO2Ohiofun]

It seemed a bit more consistent the second time around. More repetitive numbers.

[@runerebel8441]

Yes it was more consistent the second time. Guess its because I put back the sear spring so it stopped shooting in fullauto. I will change the detent before I use it next time. The balls started rolling out the barrel so I guess the detent has flattned🤔

[@redsoldier6131]

I was wondering what mods you made to your stormer, and if you could make a tutorial on how to shim the hammer spring, Thanks.

[@runerebel8441]

Hi. Softer valve spring and shimmed the hammer spring. I had a pice from an old spring that was about the same size as the stock valvespring, only it was much softer. The hammerspring was first shimmed with a ballpen spring. But it was to soft. I had some chines made springs and ended up cutting a pice from it. I put the pice in the rear of the hammerspring pin/rod using it as a shim. This give the same job as a stronger hammerspring. If I have had the right tool I would have drilled the internal volume in the valve larger, plus open the porting and angles in the valve. But for the moment just changing spring tention is all I have done. Cheers

[@H-M-78]

What is the specified Joule's on this one?

[@runerebel8441]

You mean right out of the box when new? If so thats normal paintball velocitys. Ca 10-12 joule energy.

[@H-M-78]

@runerebel8441 yes, that was the answer I was looking for. Still though it's a little bit unclear for me is the specified "Joule's" on different markers and why the numbers are higher in reality, at least at the muzzle. Or is it so simple that those numbers are only with pure paintballs? (the ammo)

[@runerebel8441]

For the paintball markers its the velocity and energy with paintballs. Usually its set to ca 280-300 fps with the 3 gram paintballs.@@H-M-78