Glad to see something diaphragm call related on KZbin. I want to learn to make my own versus buying them every year. My saliva I eat through calls and I always have one in my mouth. I have looked all over and found nothing on making calls
@joecoffman2845 ай бұрын
I don't care what anybody says, I like how you explained it and how you done it so I'm going to do it just like you done it and that way everything orta be did right. Don't you think? I really enjoyed your video. Thanks man. Turkey season is right around the corner here in north Alabama. "Gobble Gobble ghee and a Gobble Gobble good. Safe and happy turkey huntin' to you."
@gobblersniper4 ай бұрын
Thank you so much. If you need anything reach out to me
@TRKYHTR1 Жыл бұрын
Not all mouth calls are made the same. Good job.
@gobblersniper Жыл бұрын
Thanks
@danblatt31873 жыл бұрын
Good Video
@gobblersniper2 жыл бұрын
Thank you
@joshsmallwood13 жыл бұрын
Great video! Just ordered a press and cutter. Where would you recommend learning how to cut the latex? I know a little about cuts and what each cuts are called, but I’m looking for where you may have learned tips on cutting it?
@gobblersniper3 жыл бұрын
It’s honestly trial and error
@gobblersniper3 жыл бұрын
Start with v cuts then go from there
@appalachianathlete4913 жыл бұрын
Awesome video! I’m an ole boy from West Virginia looking to get into making calls for my family and I. I’ve looked on KZbin and have read a few articles about how to get started in making some mouth calls, however I can’t find anything on where to buy the supplies needed (latex, tape, etc). Any chance you could point me in the right direction? I’d also like to find a press similar to yours so that I can make the most professional call I can.
@gobblersniper3 жыл бұрын
Feather ridge has the press . Pioneer turkey call supplies for supplies
@mikealrichards5083 жыл бұрын
My advice is to get the Feather Ridge Press from Thad Bright they are the gold standard. Pioneer game call supplies and Michell Johnston of Dead End Game Calls for latex, Tape & Proph.
@lukeg5184 Жыл бұрын
Where do you get the stamp to put a custom logo on the tape?
@gobblersniper Жыл бұрын
Someone local made it for me.
@geraldkoch3943 жыл бұрын
Man that’s nice
@gobblersniper3 жыл бұрын
Thanks
@476fireman4 ай бұрын
Is there a way to make a mouth call without latex for someone who is allergic?
@gobblersniper4 ай бұрын
Im not sure.
@vickiemorriston43785 ай бұрын
Where do you get your stuff from
@gobblersniper4 ай бұрын
Pioneer and dead end
@lucasbarber42853 жыл бұрын
I’ve been making calls for a bit now but cannot find a cutter anywhere and really need that consistency before adding them to my small business, what brand cutter do you use and where could I find one?
@gobblersniper3 жыл бұрын
Look up Thad Bright on Facebook feather ridge custom calls
@lucasbarber42853 жыл бұрын
@@gobblersniper thanks man!
@user-oy9lx5cv2k3 ай бұрын
How much would it cost to start to make my own call
@gobblersniper3 ай бұрын
It’s just according to what you want to put into it. There’s jigs and presses you just need to reach out to Thad Bright. Its more of a learning process than anything
@user-oy9lx5cv2k3 ай бұрын
@@gobblersniper ok but where do I but my jig and press
@gobblersniper3 ай бұрын
@@user-oy9lx5cv2k Thad Bright on Facebook
@user-oy9lx5cv2k3 ай бұрын
@@gobblersniper thanks man
@jonpatterson56683 жыл бұрын
Hey man , I see you're in Kentucky, what part
@gobblersniper3 жыл бұрын
lily ky
@23KCOutdoors2 жыл бұрын
How do you get the tape with your stamp on them
@gobblersniper2 жыл бұрын
Stamp it with waterproof non toxic ink
@23KCOutdoors2 жыл бұрын
What’s your tension for bat wings
@gobblersniper2 жыл бұрын
I make several different ones
@travisgodwin77753 жыл бұрын
What thicknesses of latex sheets do you use??
@gobblersniper3 жыл бұрын
.004 and .003
@huntinclass50422 жыл бұрын
Do you laser engrave your logo on your mouth calls?
@gobblersniper2 жыл бұрын
No I use a stamp
@nickroy17853 жыл бұрын
Where did you get the presses from?
@gobblersniper3 жыл бұрын
Feather ridge
@gobblersniper3 жыл бұрын
Or Thad Bright
@nickroy17853 жыл бұрын
@@gobblersniper Thanks. Do I have to message him on Facebook because I am having some trouble finding it online?
@gobblersniper3 жыл бұрын
Look for Thad Bright with Featherridge on Facebook
@nickroy17853 жыл бұрын
@@gobblersniper Ok thanks
@_weondat_90613 жыл бұрын
how do i buy one
@gobblersniper3 жыл бұрын
But one what? Sorry. If it’s calls message me on Facebook if it’s a press it’s Thad Bright with Feather Ridge
@gobblersniper3 жыл бұрын
Buy not but sorry
@connorduncan51453 жыл бұрын
How do you get your logo on your tape?
@gobblersniper3 жыл бұрын
I use a stamp and an ink pad I think the ink brand is archer or something I would have to check. I had someone that does laser engraving do the stamp for me. I also stamp the tape before I frame the calls. Stamping tape is first thing I do.
@mikealrichards5083 жыл бұрын
Connor I build a jig and stamp set if you are interested I can send you some information on it. It centers the stamp to the tape and makes it consistent marking every time. Look me up on Facebook and send me a PM
@GarrettHarperofficial3 жыл бұрын
Hey Mikeal could I get your Facebook please so I could pm on getting a custom stamp and stamp jig. If so that would be great
@mikealrichards5083 жыл бұрын
@@GarrettHarperofficial Facebook is just under my name Mikeal Richards send me a message when you send the friends request. I dont accept requests without a message. Thanks,
@gobblersniper3 жыл бұрын
Do you have a video uploaded of how the stamp works just wondering