Tips on installing a trailtech temp gauge

Simple tips on installing a trailtech Cht gauge

[@brandonewers6679]

“Always start spark plugs in by hand” lol yeah I learned that the hard way

[@istoneyy4204]

its the number 1 rule :P

[@Scooterswapshop]

yeah seems thats not a common knowledge item

[@aztlannative162]

Eazy-E playing the background 👍🏾

[@Scooterswapshop]

shhh we may get demonetized haha

[@49684]

So, after installing 70cc build, what are idea temps?

[@MitchsScooterStuff]

Thanks for sharing the video with us!

[@Scooterswapshop]

thank you Mitch!

[@Milan_1337]

Which temperature range is best? What temperature should be targeted?

[@Scooterswapshop]

don't exceed 375

[@o0WesleyPipes0o]

@@Scooterswapshop Would that temp also count for a Minarelli LC engine? Or what temp would you want to read on an LC engine where the temp feeler is attached to the spark plug just like in your video?

[@Manwichman]

What is the size ring for the cr7hsa plug? Is that 14 also? Thanks

[@trajan1985]

Does the LCD display have a separate battery?

[@tarourc119]

Does it work with 6v motorbikes?? And does that one wire tell you the tempature and gives electricity to the gauge so no other wires needed?

[@bobbyjohnson5637]

Will i need clearance on a corsa head?

[@daveb1963]

i installed mine on cylinder head stud bolts works fine...

[@Scooterswapshop]

Your temps are probably 20-50 degrees off.

[@anthonyquinones1465]

Great product breaking in spree keeping me from frying it let me know when it comes with a light

[@Scooterswapshop]

For sure!

[@Mac-bn]

Nice content, i m confuse with engine oil temperature gauge and cylinder head temp gauge, please advice, thanks

[@pb6839]

A two stroke scoter doesn't have a way to measure the oil temp as it's mixed with the gas.

[@devastador28]

thank you .NWA

[@Sneds_]

Boyz n the hood and I got 5 on it lol

[@Scooterswapshop]

nice

[@basimfara]

Is there any leak after the spark plug ring off? afraid to mill around the hole to get the sensor adapter seated. any help?

[@Scooterswapshop]

the ring acts as the seal

[@ksr2513]

So you cant use it on a liquid cooled engine it wont work or its not accurate?

[@Scooterswapshop]

false you can!

[@whilstingdog]

Wont this change where the sparkplug sits in the cylinder and alter the combustion of that cylinder slightly?

[@Scooterswapshop]

No because your removing the crush ring.

[@kevinhendon]

Had one on my Vespa and worked great, went to put on my Lambretta but the battery inside it had died (not removable), so only option is to buy a complete new kit, wont bother as too expensive. Best option to solve the fitting on plug is to put over plug body held ont to plug with tight fit heat resistant tubing, just enough to hold it and not foul the plug cap. The reading will be the same as putting on as in video, taking off the crush washer on a plug is wrong !!!

[@Scooterswapshop]

gotcha

[@49684]

As a newbie, what is this gauge gonna tell me about my bike?

[@Hockeymike16]

it says "temp guage" in the title

[@pikameme3322]

You will track how hot your engine is so you can avoid overheating I guess.

[@The1s2a3r]

I would love to have one of these gauges for my 09 fatbob. 12mm plugs on it. price? Thnx Dude

[@Scooterswapshop]

scooterswapshop.com/search?q=trailtech

[@3Knucleheadz]

Where did you get your Terminal Ring from? Let me know.

[@Scooterswapshop]

kawikamo were scooterswapshop. We sell them.

[@3Knucleheadz]

Nice...do you folks ship to Hawaii?

[@Scooterswapshop]

kawikamo yep! Every day!

[@3Knucleheadz]

I'm just looking for the Terminal ring and wire. Is that possible to get from you folks?

[@Scooterswapshop]

kawikamo yes please check our website we have them

[@gerrynightingale9045]

**Sorry, but I can't see placing on my '08 Metro w/a liquid-cooled engine...the plug clearances are critical to the aluminum-head and piston 'TDC' with a 'Denso' plug, and anything altering that precise measure alters performance...and with a 50cc Honda engine, I can see where that thick 'copper-wire ring' could result in poor-firing due to the plug 'not seated properly'**(why not a retainer-clip on the cylinder-head itself? Or an 'EGT' probe? ) **ps...I ride my 'Metro' when it's 'Hot as Hell' all this summer and the last one as well, while the 'Mighty '50' runs like a 'growling turbine' hauling my 230lbs. around at 'wide-open-throttle' for mile after mile...and never once has the 'Temp. Warning' light so much as 'flickered' !** I was thinking 'Maybe it's out!' so I checked it, and it works the way it's supposed to...it activates at 185F. at the pre-set level ! (I used a hair-dryer to force the temp. up)

[@Scooterswapshop]

Gerry Nightingale heat isn’t really an issue for your bike. If you were to run a gauge on that you’d use an inline coolant sensor. Not a style like this

[@gerrynightingale9045]

I figured as much...(the Honda is so reliable it's scary! As long as it's properly taken care-of and not abused...it will 'out-live' my 64-yr.old ass!) What I don't understand is the rationale of 'why' a heavy-gauge metal-loop as a fitting on the plug-shaft? Is there a low-current running to it, and as it expands from heat it forms greater resistance...and a 'chip' in the module interprets that into a temp.? Does it have some 'bi-metal' in the 'loop' that expands differently from copper?

[@gunplacustoms5444]

What temperature range does the gauge display?

[@Scooterswapshop]

I don’t have the specs on me but my guess is 10 degrees to 600. I’ve seen them hit in the high 500s and your motor is melting by then lol

[@gunplacustoms5444]

@@Scooterswapshop I meant what temperature does the meter itself show up to? Like 0-250°F or 0-450°F

[@louiec1848]

Is this 10mm or 14mm? Thanks

[@Scooterswapshop]

We have them in 10/12/14

[@milagaytos1390]

Thanks bro

[@Scooterswapshop]

yeah buddy

[@grantmara769]

How much for ur polini twin gauge

[@Scooterswapshop]

theyre on backorder now. been for a bit, theyre just under $130

[@grantmara769]

Scooterswapshop ok thanks ill kedp on eye out on ur site

[@pantsi]

Do they show in celcius?

[@Scooterswapshop]

yes

[@ironlionzion2265]

My ring on the sparkplug is completely fine, I leave it.

[@darrellbaker4537]

That would cause the spark plug gap to be off.

[@Scooterswapshop]

thats a very bad move

[@winnerwinds6509]

How do you cut the ring off?

[@Scooterswapshop]

wire cutters

[@bassheadlife492]

What model is that?

[@Scooterswapshop]

is what?

[@bassheadlife492]

@@Scooterswapshop the temp gauge

[@Aj-om4dt]

Hi thanks for the video, very detailed. Can you get one for mph?? Thanks please wb cheers Adam

[@pouncer11]

Trailtech has a gauge pod that does speed and rpm also but it is more expensive

[@Scooterswapshop]

THANKS